(360) - CASE TRENCHER (1/86-12/04) (09) - CHASSIS/ATTACHMENTS Case Constructuion

Select section (09) - CHASSIS/ATTACHMENTS Case:

(9-002) - FRONT FRAME

(9-004) - REAR FRAME, FLOOR PLATES, AND ROPS

(9-006) - HOOD, GRILLE, SIDE PANELS, AND FRONT CONSOLE - DEUTZ DIESEL ENGINE MODELS PRIOR TO P.I.N. JAF0104257

(9-007A) - HOOD, GRILLE, SIDE PANELS, AND FRONT CONSOLE - DEUTZ DIESEL ENGINE MODELS P.I.N. JAF0104257 & AFTER

(9-008) - HOOD, GRILLE, SIDE PANELS, AND FRONT CONSOLE - WISCONSIN GASOLINE ENGINE MODELS

(9-010) - REAR CONSOLES

(9-012) - SEAT AND SEAT MOUNTING

(9-014) - OPERATORS SEAT

(9-016) - TRENCHER BOOM LIFT CONTROL

(9-018) - TRENCHER CLUTCH CONTROL LEVER

(9-020) - TRENCHER DRIVE BELT AND CLUTCH

(9-022) - JACKSHAFT AND TRENCHER DRIVE CHAIN

(9-024) - TRENCHER BOOM MOUNTING SHAFT AND AUGER

(9-026) - TRENCHER DRIVE CHAIN GUARD AND DIRT DEFLECTOR

(9-028) - TRENCHER BOOM LIFT CYLINDER MOUNTING

(9-030) - TRENCHER BOOMS AND MOUNTING

(9-032) - TRENCHER BOOM END AND SPROCKET MOUNTING - CHANNEL BOOM PARTS

(9-034) - TRENCHER BOOM END ASSEMBLIES

(9-036) - CRUMBER BOOM MOUNTING BRACKET

(9-038) - CRUMBER BOOM ATTACHMENTS

(9-040) - STANDARD AND ANTI-BACKFLEX DIGGING CHAINS - 50,000 LB. CHAINLINE, 3 FOOT (0.914M) DEPTH BOOM

(9-040[A]) - STANDARD AND ANTI-BACKFLEX DIGGING CHAINS - 50,000 LB. CHAINLINE, 4 FOOT (1.2M) DEPTH BOOM

(9-040[B]) - STANDARD AND ANTI-BACKFLEX DIGGING CHAINS - 50,000 LB. CHAINLINE, 5 FOOT (1.5M) DEPTH BOOM

(9-042) - STANDARD DIGGING TEETH

(9-044) - ROCK AND FROST DIGGING TEETH, IF USED

(9-046) - BACKFILL BLADE LIFT FRAME AND MOUNTING

(9-048) - BACKFILL BLADE AND MOUNTING ARMS

(9-050) - BACKFILL BLADE LIFT AND ANGLE CONTROLS - W/FLAT TYPE CONTROL LEVERS

(9-051A) - BACKFILL BLADE LIFT AND ANGLE CONTROLS W/ROD TYPE CONTROL LEVERS

(9-052) - BACKHOE CONTROLS AND CONTROL CONSOLE - MODELS WITH FOUR LEVER CONTROLS

(9-054) - BACKHOE CONTROL CONSOLE - MODELS WITH DUAL LEVER CONTROLS, PRIOR TO P.I.N. JAF0091962

(9-055A) - BACKHOE CONTROL CONSOLE - MODELS WITH DUAL LEVER CONTROLS, P.I.N. JAF0091962 AND AFTER

(9-056) - DUAL LEVER BACKHOE CONTROLS AND LINKAGE, PRIOR TO P.I.N. JAF0091962

(9-058) - BACKHOE FRAME AND SWING TOWER

(9-060) - BACKHOE SWING TOWER AND BOOM

(9-062) - BACKHOE DIPPER AND BUCKET

(9-064) - BACKHOE BUCKETS - STANDARD BUCKETS

(9-066) - BACKHOE BUCKETS - BELLHOLE BUCKETS

(9-068) - HYDRA-BORER CONTROL VALVE MOUNTING

(9-070) - HYDRA-BORER GEARBOX AND MOTOR MOUNTING

(9-072) - HYDRA-BORER GEARBOX

(9-074) - HYDRA-BORER WATER PUMP MOUNTING

(9-076) - HYDRA-BORER WATER PUMP ASSEMBLY - H668442

(9-078) - HYDRA-BORER ATTACHMENT UNIVERSAL JOINT

(9-080) - HYDRA-BORER DRILL STEM LEVEL FRAME

(9-082) - HYDRA-BORER COUPLERS, ADAPTERS, AND DRILL STEMS

(9-084) - HYDRA-BORER BORING ATTACHMENTS

(9-086) - PLOW CONTROL CONSOLE

(9-090) - PLOW FRONT FRAME AND CYLINDERS

(9-092) - PLOW PIVOT FRAME AND LINKS

(9-094) - PLOW REAR FRAME AND GEARBOX MOUNTING

(9-096) - PLOW GEARBOX

(9-100) - STRAIGHT PLOW BLADES AND 4:1 CHUTES - 12 AND 18 INCH COVER DEPTH

(9-104) - STRAIGHT PLOW BLADES AND 4:1 CHUTES - 18 AND 24 INCH COVER DEPTH, 1 INCH WIDE BLADE

(9-106) - STRAIGHT PLOW BLADE AND 10:1 CHUTE - 12 INCH COVER DEPTH, 1 INCH WIDE BLADE W/O WELDED LUGS

(9-108) - STRAIGHT PLOW BLADE AND 10:1 CHUTE - SWIVEL HINGE, 12 INCH COVER, 1 WIDE INCH BLADE W/O WELDED LUGS

(9-110) - STRAIGHT PLOW BLADES AND 10:1 CHUTES - SWIVEL HINGE, 12 INCH COVER DEPTH

(9-112) - STRAIGHT PLOW BLADES AND 10:1 CHUTES - SWIVEL HINGE, 18 INCH COVER DEPTH

(9-114) - ADVANCED ANGLE ("D" TYPE) PLOW BLADES AND 4:1 CHUTES - 12 AND 18 INCH COVER DEPTH

(9-118) - ADVANCED ANGLE ("D" TYPE) PLOW BLADES AND 4:1 CHUTES - 18 AND 24 INCH COVER DEPTH, 1 INCH WIDE BLADE

(9-120) - ADVANCED ANGLE ("D" TYPE) PLOW BLADE AND 10:1 CHUTE - SWIVEL HINGE, 18 IN. COVER, 1 IN. WIDE BLADE

(9-122) - ADVANCED ANGLE ("D" TYPE) PLOW BLADE AND 10:1 CHUTE - SWIVEL HINGE, 18 IN. COVER, 1 IN. WIDE BLADE

(9-124) - ADVANCED ANGLE ("D" TYPE) PLOW BLADE AND 10:1 CHUTE - SWIVEL HINGE, 24 IN. COVER, 1 IN. WIDE BLADE

(9-126) - ADV. ANGLE ("A" TYPE) PLOW BLADES & 10:1 CHUTES - SWIVEL HINGE, 18 & 24 IN. COVER, 1-1/2 IN. BLADE

(9-128) - ADV. ANGLE ("A" TYPE) PLOW BLADES AND 10:1 CHUTES - SWIVEL HINGE, 30 IN. COVER, 1-1/2 IN. WIDE BLADE

(9-130) - ADV. ANGLE ("A" TYPE) PLOW BLADES & 10:1 CHUTES - SWIVEL HINGE, 24 & 30 IN. COVER, 2 IN. WIDE BLADE

(9-132) - CAST PLOW BLADE AND 4:1 CHUTE - 18 INCH COVER DEPTH, 1 INCH WIDE BLADE

(9-134) - CAST PLOW BLADE AND 10:1 CHUTE - 18 INCH COVER DEPTH, 1 INCH WIDE BLADE

(9-136) - PLOW BLADE BULLETS AND MANDRELS, TOE KITS

(9-138) - DECALS

(9-140) - DECALS

(9-142) - DECALS

Truck sale:

 

 

2003 CASE 360

Martin Auction Services
Clinton, Illinois

 

USD $5,500 

1991 CASE 360

Mid-State Equipment
Wisconsin

 

 

1989 CASE 360

INDIANA AUTO AUCTION*
Fort Wayne, Indiana

USD $6,250 

CASE 360

R & R Dexter Farms, Inc.
Danforth, Illinois

USD $11,000 

1994 CASE 360

Gulf Coast Equipment