6. (14-05) - SUSPENSION, ADJ. FRONT AXLE, SWEPT BACK, 48 - 80 " TREAD, TRAC. W/ 1-11/16 DIA STEERING KNUCKLE POST
(14-05) - SUSPENSION, ADJ. FRONT AXLE, SWEPT BACK, 48 - 80 " TREAD, TRAC. W/ 1-11/16 DIA STEERING KNUCKLE POST Case:
For full view, you need register
Parts on group (484) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/78-12/81):
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 125617 | [1] | LUBE NIPPLE,3/16" x .61 lg, Drive | IH FITTING, 3/16 hole less ball check lub Superseded by part number: 219-13 |
| 2. | 219-53 | [1] | LUBE NIPPLE,65 Degree Elbow, 3/16" NPTF | CAS FITTING, 3/16 hole 65D lub |
| 3. | 405574R1 | [2] | BUSHING | IH support Superseded by part number: 1536870C1 |
| 4. | 20605R1 | [1] | LUBE NIPPLE,45 Degree, 3/16" x .62" lg, Drive | IH FITTING, 1/4 hole 45D lub Superseded by part number: 219-405 |
| 5. | 405570R1 | [2] | BUSHING,50.95mm ID x 54.15mm OD x 47.63mm L | IH pivot |
| 6. | 539158R93 | [1] | AXLE | IH ASSY, front, center section, Includes Refs. 3, 5, & 35 |
| 7. | 539128R1 | [1] | SHAFT ASSY. | IH SHAFT ASSY, front axle pivot |
| . . | 179883 | [2] | BOLT,Hex, 1/2" - 13 x 1 1/4", Gr 5 | IH Superseded by part number: 180175 |
| . . | 1251978C1 | [2] | WASHER, hardened | |
| 8. | 219-56 | [1] | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | CAS FITTING, 1/8 PTF short 90D lub |
| 9. | 15943DA | [2] | SEALING WASHER,60.33mm ID x 72.23mm OD x 4.76mm Thk | IH Steering knuckle felt |
| 10. | 117997 | [2] | WOODRUFF KEY,#25, 5/16" x 1 1/2", HT | IH |
| 11. | 405840R12 | [2] | KNUCKLE | IH ASSY, steering |
| 12. | 185106C91 | [2] | BEARING ASSY,44.2mm ID x 70.1mm OD x 19.05mm W | IH BEARING, steering knuckle thrust |
| 13. | 66702C91 | [1] | EXTENSION | IH ASSY, front axle RH |
| 14. | 376099R1 | [2] | BUSHING | IH Superseded by part number: 358958R2 |
| 15. | 405837R1 | [1] | ARM | IH steering knuckle RH |
| . . | 16081R1 | [1] | BOLT,Hex, 1/2" - 13 x 3 1/8", Gr 5 | IH Superseded by part number: 13-850 |
| . . | 102637 | [1] | NUT,1/2"-13, G5 | IH Superseded by part number: 280431 |
| 16. | 405576R1 | [4] | NUT | IH front axle |
| . . | 3116407R2 | [1] | BALL JOINT | IH JOINT, ball, threaded end Superseded by part number: 3116407R5 |
| . . | 3129379R1 | [1] | TUBE,20.7 mm ID, 28 mm OD, 419 mm Length | IH ASSY, center |
| . . | 3129380R1 | [1] | JOINT | IH ball, dimple end Superseded by part number: 3129380R2 |
| . . | 3116409R1 | [1] | SET SCREW,Hex, 7/16" - 14 x 1" | IH SCREW, set |
| . . | 3116410R1 | [1] | LOCK NUT | IH NUT, lock Superseded by part number: 86642432 |
| . . | 3116411R1 | [1] | LOCK WASHER | IH |
| . . | 3116412R1 | [1] | LOCK NUT | IH NUT, clamp |
| 18. | 87415 | [2] | LUBE NIPPLE,90 Degree, 1/4" NPT x 3/4" L, Drive | NH NIPPLE, LUBE, 90°, 1/4" NPT x .75" lg, Drive |
| 19. | 527658R91 | [2] | BALL JOINT | IH END ASSY, RH |
| 19. | 527658R91GV | [2] | TIE-ROD | MKT Value, Tie Rod End |
| . . | 102648 | [2] | SLOTTED NUT,9/16"-18, G5 | IH Superseded by part number: 425-139 |
| . . | 103385 | [2] | COTTER PIN,1/8" x 1" | IH PIN, SPLIT (COTTER), 1/8" x 1" Superseded by part number: 80755 |
| 20. | 358900R1 | [4] | SEAL | IH COVER, dust Superseded by part number: 87538419 |
| 21. | 390686R1 | [2] | JAM NUT | IH 11/16-18 hex jam |
| 22. | 527659R2 | [2] | TUBE | IH tie rod Superseded by part number: 67529C1 |
| 23. | 43747D | [2] | CLAMP | IH tie rod tube |
| . . | 537165R1 | [2] | BOLT,Hex, 7/16" - 20 x 1-7/8", Gr 5 | IH 7/16-20 x 1-3/4 hex hed cap |
| . . | 9421096 | [2] | LOCK WASHER,7/16" | IH Superseded by part number: 92-31044 |
| . . | 271505 | [2] | BODY | NNA 7/16-NF pln type 5 Superseded by part number: 425-117, 425-117, NLS |
| 24. | 527660R91 | [2] | END | IH ASSY, LH, or Superseded by part number: 65082C91 |
| 24. | 65082C91 | [2] | END | IH ASSY, LH |
| 25. | 219-8 | [2] | LUBE NIPPLE,1/4" - 28 NPTF | CAS NIPPLE, LUBE, 1/4"-28 NPT x .54" lg Superseded by part number: 87414 |
| 26. | 405836R1 | [1] | ARM | IH steering knuckle LH |
| 27. | 443567 | [2] | LUBE NIPPLE,1/4" x .56 lg, Drive | IH FITTING, 1/4 hole less ball check lub Superseded by part number: 219-98 |
| 28. | 66701C91 | [1] | EXTENSION | IH ASSY, front axle LH |
| 30. | 405584R2 | [4] | BOLT,Shldr, 3/4" - 16 x 4 | IH Shoulder |
| 31. | 86504104 | [1] | LUBE NIPPLE,1/4" x .56" lg, Drive | PA FITTING, 1/4 hole lub Superseded by part number: 219-14 |
| 32. | 379748R1 | [2] | BUSHING | IH Superseded by part number: 379748R2 |
| 33. | 405585R1 | [1] | ARM | IH ASSY, power steering center Superseded by part number: 405585R11 |
| 34. | 405580R11 | [1] | BAR ASSY. | IH BAR ASSY, power steering cylinder Superseded by part number: 405580R21 |
| . . | 67976C1 | [1] | PLATE, LOCKING | IH STRIP, center arm bolt lock |
| . . | 179885 | [2] | BOLT,Hex, 1/2" - 13 x 1 1/2", Gr 5 | IH Superseded by part number: 87689 |
| 35. | 3125304R1 | [1] | BUSHING | IH spring steel Superseded by part number: 103925A1 |
Parts catalog (484) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/78-12/81):
(484) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/78-12/81) part catalog
(484) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/78-12/81) part catalog
(484) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/78-12/81) part catalog
(484) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/78-12/81) part catalog
(484) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/78-12/81) part catalog
(484) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/78-12/81) part catalog
(484) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/78-12/81) part catalog
(484) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/78-12/81) part catalog