3. PICKER
6. (6-158) - DRUM DRIVE
(6-158) - DRUM DRIVE Case:
For full view, you need register
Parts on group (782) - CASE IH COTTON PICKER (5/86-12/87):
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 19. | NSS | [1] | NOT SOLD SEPARAT | CON GEAR - bevel pinion, 18 teeth (Order gear set 75827C91) (Continued from Page 6-157) |
| 20. | 107500C1 | [1] | SPACER | IH - bevel, Serial Range: gear-nut |
| 21. | 55-2065 | [1] | LOCK WASHER,Type TW-065 | CAS WASHER - bevel gear lock |
| 22. | 271254 | [1] | NUT | IH - bevel gear lock Superseded by part number: 54-2065, 54-2065, NLS |
| 23. | 184310C91 | [1] | COUPLING | IH - input |
| 24. | 107318C1 | [1] | SHAFT | IH - intermediate |
| . . | 425-138 | [1] | SLOTTED NUT,1/2"-20, G8 | CAS NUT, SLOTTED, 1/2"-20, G8 |
| . . | 103396 | [1] | PIN, SPLIT (COTTER),5/32" x 1" | IH 5/32" x 1" Superseded by part number: 120169 |
| 25. | 463911R91 | [2] | ROLLER BEARING,1" ID x 0.58" | IH BEARING - intermediate shaft cone Superseded by part number: 132710 |
| 26. | 572564R1 | [2] | BEARING CUP | IH BEARING - intermediate shaft cup Superseded by part number: 132709 |
| 27. | 28141R1 | [1] | RING - snap (Replaces 513010R1) | |
| 29. | 121536C1 | [1] | WASHER | IH - intermediate shaft |
| 30. | 372821R1 | [1] | O-RING,0.103" Thk x 1.049" ID, -121, Cl 5, 75 Duro | IH - 1-1/16 ID x 3/32 inch width (27 ID x 2 mm width) Superseded by part number: 14457980 |
| 31. | 75819C1 | [1] | PACKAGE | IH KIT - intermediate shaft retainer shim |
| 32. | 107317C2 | [1] | RETAINER | IH - intermediate shaft |
| . . | 19712R1 | [1] | PIN,3/16" x 2 1/4", Coiled | IH Superseded by part number: 38-31236 |
| . . | 179844 | [1] | BOLT,Hex, 3/8" - 16 x 1 5/8", Gr 5 | IH - hex, 3/8 NC x 1-5/8 inch Superseded by part number: 13-626 |
| 33. | 184135C1 | [1] | SHAFT | IH - drum drive (Low drum P.I.N. 682 and after) (High drum P.I.N. 2125 and after) |
| 33. | 107316C1 | [1] | SHAFT | IH - drum drive (Low drum P.I.N. 507 thru 681) (High drum P.I.N. 507 thru 2124) Superseded by part number: 184148C91, 184135C1 |
| 34. | 107259C1 | [1] | GEAR | IH - drum drive sliding, 49 teeth |
| 35. | 381486R1 | [1] | SNAP RING,#187, 1.759", Ext | IH RING - snap Superseded by part number: 81867431 |
| 36. | 371883R1 | [1] | BEARING CUP | IH - Drum drive shaft, inner Superseded by part number: 84349 |
| 37. | 130865C91 | [1] | BEARING | IH - drum drive shaft cone, inner |
| 38. | 184148C91 | [1] | BEARING | IH - drum drive shaft cone, outer (Low drum P.I.N. 682 and after) (High drum P.I.N. 2125 and after) |
| 38. | 459456R91 | [1] | CONE | IH BEARING - drum drive shaft cone, outer (Low drum P.I.N. 507 thru 681) (High drum P.I.N. 507 thru 2124) Superseded by part number: 86576982 |
| 39. | 642954R1 | [1] | BEARING ASSY,1" ID x 2.441" OD x 0.8125" | IH BEARING - drum drive shaft cup, outer Superseded by part number: 28966 |
| 40. | 539100R1 | [1] | OIL SEAL | IH - drum drive shaft oil |
| 41. | 107250C1 | [1] | CAGE | IH - drum drive bearing |
| . . | NLS | [3] | NO LONGER SERVICED | BAS |
| 42. | 75818C1 | [1] | PACKAGE | IH - drum drive and input shaft bearing shim |
| 43. | 22410R1 | [1] | O-RING,0.139" Thk x 2.859" ID, -233, Cl 5, 75 Duro | IH - 2-7/8 ID x 1/8 inch width (73 ID x 3 mm width) Superseded by part number: 86509814 |
| 44. | 75827C91 | [1] | GEAR | IH SET - matched bevel |
Parts catalog (782) - CASE IH COTTON PICKER (5/86-12/87):
(782) - CASE IH COTTON PICKER (5/86-12/87) part catalog
(782) - CASE IH COTTON PICKER (5/86-12/87) part catalog
(782) - CASE IH COTTON PICKER (5/86-12/87) part catalog
(782) - CASE IH COTTON PICKER (5/86-12/87) part catalog
(782) - CASE IH COTTON PICKER (5/86-12/87) part catalog
(782) - CASE IH COTTON PICKER (5/86-12/87) part catalog
(782) - CASE IH COTTON PICKER (5/86-12/87) part catalog
(782) - CASE IH COTTON PICKER (5/86-12/87) part catalog