(445) - INTERNATIONAL HARVESTER RECTANGULAR BALER (NORTH AMERICA) (1/76-12/88) (00) - COMPLETE MACHINE Case Agriculture

Select section (00) - COMPLETE MACHINE Case:

(2) - INTRODUCTION (May 8 2002 3:22:00.0037 PM)

(3) - INTRODUCTION, (CON'T)

(A-02) - HITCH

(A-03) - BALE CHAMBER

(A-04) - MAIN FRAME

(A-05) - WHEELS AND AXLES, FLOTATION TIRES

(A-06) - CROSS CONVEYOR AND FEED OPENING, 435 AND 445 BALERS

(A-10) - AUGER AND AUGER DRIVE SUPPORT, 435 AND 445 BALERS

(A-14) - PICKUP CYLINDER

(A-16[A]) - PICKUP WHEEL 428 SERIAL NO. 701 AND ABOVE 435 SERIAL NO. 6001 AND ABOVE 445 TWINE SERIAL NO. 3001 AND ABOVE 445 WIRE SERIAL NO. 2001 AND ABOVE

(A-17) - PICKUP COVER

(A-18) - MAIN DRIVE

(A-20) - PLUNGER, 435 AND 445 BALERS

(A-23) - PLUNGER CENTER FILLER PACKAGE

(A-24) - PACKER FINGERS AND DRIVE, 435 AND 445 BALERS

(A-30) - NEEDLES AND NEEDLE GUARD, FOR TWINE BALERS

(A-32) - NEEDLES AND GUIDE, LOCK TWIST BALER, FOR 445 WIRE BALER

(A-33) - TWINE CHEST

(A-34) - KNOTTER DRIVE FRAME AND BREAST PLATE, FOR TWINE BALERS

(A-36) - KNOTTER, ALL TWINE

(A-38) - KNOTTER AND RELATED PARTS, FOR TWINE BALERS

(A-40) - TWISTER BASE PLATE AND SUPPORTS, FOR WIRE BALER

(A-42) - LOCK TWIST TWISTER, FOR WIRE BALER

(A-43) - LOK-TWIST TWISTER AND RELATED PARTS, FOR WIRE BALER

(A-44) - BALE LENGTH CONTROL

(A-45) - BALE COUNTER

(A-46A) - SMV EMBLEM AND LIGHT BRACKET SOCKET

(A-46A[A]) - MANUAL BALE TENSION DEVICE 435 AND 445 BALERS

(A-47) - HYDRAULIC BALE TENSION DEVICE CHANNELS, HOSE AND DRIVE FOR AUTOMATIC LUBRICATION

(A-48) - HYDRAULIC BALE TENSION DEVICE, HYDRAULIC PUMP AND RESERVOIR

(A-49) - HYDRAULIC BALE TENSION DEVICE, HYDRAULIC JACK

(A-50) - POWER TAKE-OFF DRIVE SHAFT CLUTCH

(A-51) - POWER TAKE-OFF DRIVE SHAFTS, THREE KNUCKLE, HAYSE DANA, ROCKWELL, REXNORD, 445, 428 & 435 HEAVY DUTY

(A-53) - POWER TAKE-OFF DRIVE SHAFTS, THREE KNUCKLE, WEASLER, 445, 428 AND 435 HEAVY DUTY

(A-57[A]) - FOUR COIL WIRE CONTAINER FOR WIRE BALER

(A-58) - ENGINE SHUT-OFF ATTACHMENT, FOR WIRE BALER

(A-59) - TRAILER HITCH ATTACHMENT

(A-59[A]) - BALE CHUTE ATTACHMENT

(A-60) - FLYWHEEL AND KNUCKLE SHIELD

(A-60[A]) - PLUNGER CRANK SHIELD ATTACHMENT

(A-60[B]) - FLYWHEEL, SHIELD AND SUPPORT

(A-60[C]) - DRIVE PULLEY SHIELD (O.S.H.A.) WHEN NO. 10 BALE THROWER IS MOUNTED

(A-61) - SHIELDS AND GUARDS

(A-61[A]) - LIFTING JACK

(A-62) - BALE TURNER ATTACHMENT

(A-63) - FLASHING WARNING LIGHTS