(45) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/64-12/81) (00) - COMPLETE MACHINE Case Agriculture

Select section (00) - COMPLETE MACHINE Case:

(2) - INTRODUCTION

(3) - INTRODUCTION

(A-1) - INTERNATIONAL 45 VIBRA SHANK CULTIVATOR GROUND WORKING TOOLS

(A-2) - GROUND WORKING TOOLS & SHANKS W/SERRATED TYPE SHANK BUSHING, BUILT 1965-1970 SEASON

(A-3) - GROUND WORKING TOOLS AND SHANKS, VIBRA SHANK, W/NOTCHED TYPE SHANK BUSHING BUILT 1970 SEASON&SINCE

(A-4) - GROUND WORKING TOOLS AND SHANKS, GROUND WORKING TOOLS

(B-02) - SLOW MOVING VEHICLE EMBLEM, PRODUCT GRAPHICS

(B-03) - MAIN FRAME, 8 FOOT 6 INCH

(B-04) - MAIN FRAME, 12 FOOT 6 INCH

(B-05A) - EXTENSIONS

(B-05A[A]) - ALTERNATE SHANK MOUNTING TUBE FOR 6 INCH SPACING

(B-05B) - C-FRAME EXTENSIONS

(B-05B[A]) - TRAILING HITCH

(B-06) - C-FRAME EXTENION HINGE, REQUIRED FOR FOLDING C FRAME WHILE MACHINE IS IN TRANSPORT

(B-06[A]) - TRUSS ROD, FOR THREE POINT HITCH 12 FOOT 6 INCH MACHINE EQUIPPED W/MULCHER

(B-06[B]) - TRUSS ROD

(B-07) - C-FRAME LIFT HELPER SPRING, 12 FOOT 6 INCH MODEL ONLY, USED WITH C FRAME HINGE

(B-08) - VERTICAL LIMITER,FOR SAFETY W/2 PT FAST HITCH W/IH F706,F756,F806 PR F856 TRAC BUILT PRIOR TO 7/1972

(B-08[A]) - VERTICAL LIMITER FOR SAFETY W/2 POINT FAST HITCH W/IH F656 TRACTOR, BUILT PRIOR TO JULY, 1972 SEASON

(B-09) - THREE POINT HITCH

(B-11) - PNEUMATIC GAUGE WHEEL MOUNTING, OFFSET MOUNTED AXLE TYPE

(B-12) - PNEUMATIC GAUGE WHEEL MOUNTING, CENTER MOUNTED AXLE TYPE

(B-13) - PNEUMATIC GAUGE WHEEL AND HUB

(B-14) - STEEL GAUGE WHEEL, PRIOR TO 1973 SEASON

(B-15) - FAST HITCH, FOR 12 FOOT 6 INCH MODEL ONLY, BUILT PRIOR TO MAY 1974 SEASON

(B-16) - C-FRAME HYDRAULIC LIFT, 16 FOOT 6 INCH AND LARGER MODEL WITH 6 INCH SPACING

(B-17) - C-FRAME HYDRAULIC LIFT, RECOMMENDED HYDRAULICS

(B-18) - C-FRAME HYDRAULIC LIFT, RECOMMENDED HYDRAULICS

(B-19) - C-FRAME LIFT HYDRAULIC CYLINDER

(B-20) - C-FRAME LIFT HYDRAULIC CYLINDER, MONARCH

(B-21) - C-FRAME LIFT HYDRAULIC CYLINDER, MONARCH

(B-22) - C-FRAME LIFT HYDRAULIC CYLINDER

(C-02) - MAIN FRAME AND HITCH, 8 FOOT 6 INCH MODEL

(C-03) - MAIN FRAME AND HITCH, 12 FOOT 6 INCH MODEL

(C-04) - AXLE AND CONNECTIONS, PRIOR TO SERIAL NO. 5526

(C-05) - AXLE AND CONNECTIONS, SERIAL NO 5526 AND SINCE

(C-06) - WHEEL AND HUB

(C-07) - ROCKSHAFT UNIT

(C-08) - SLOW MOVING VEHICLE EMBLEM

(C-08A) - PRODUCT GRAPHICS

(C-09) - EXTENSIONS

(C-09[A]) - C-FRAME EXTENSION

(C-09[B]) - TRAILING HITCH

(C-10) - HAND LIFT, BUILT PRIOR TO JULY 1978

(C-11) - C-FRAME LIFT HELPER SPRING, PRIOR TO SERIAL NO 5526

(C-12) - C-FRAME LIFT HELPER SPRING, SERIAL NO 5526 AND SINCE

(C-13) - DUPLEXING BAR REQUIRED TO DUPLEX 8'6" MODEL W/101 SQUADRON HITCH USE ON MACHINES PRIOR TO OCT. 1971

(C-13[A]) - DUPLEXING TIE LINK REQUIRED TO DUPLEX 8 FOOT 6 INCH MODEL W/101 SQUADRON HITCH

(C-13[B]) - C-FRAME EXTENSION HINGE REQUIRED FOR FOLDING C FRAME WHILE MACHINE IS IN TRANSPORT

(C-14) - HYDRAULIC MOUNTING PARTS

(C-15) - C-FRAME HYDRAULIC LIFT, 16 FOOT 6 INCH AND LARGER MODEL, W/6 INCH SPACING

(C-16) - C-FRAME HYDRAULIC LIFT, RECOMMENDED HYDRAULICS

(C-17) - C-FRAME HYDRAULIC LIFT, RECOMMENDED HYDRAULICS

(C-18) - C-FRAME LIFT HYDRAULIC CYLINDER

(C-19) - C-FRAME LIFT HYDRAULIC CYLINDER, MONARCH

(C-20) - C-FRAME LIFT HYDRAULIC CYLINDER, MONARCH

(C-21) - C-FRAME LIFT HYDRAULIC CYLINDER

(C-22) - REMOTE CONTROL HYD CYL RECOMMENDED HYD FOR TRAC W/HYD SYSTEMS RATED UP TO 3000 PSI

(C-23) - REMOTE CONTROL HYDRAULIC CYLINDER

(C-24) - REMOTE CONTROL HYD CYL RECOMMENDED HYD FOR TRACS W/HYD SYSTEMS RATED UP TO 2500 PSI

(C-24[A]) - SAFETY CHAIN EQUIPMENT

(D-02) - MAIN FRAME, BUILT PRIOR TO AUGUST 1976 SEASON

(D-03) - MAIN FRAME, BUILT AUGUST 1976 SEASON AND SINCE

(D-04) - TRACTOR HITCH JACK, 22 FOOT 6 INCH MODEL BUILT PRIOR TO, THE 1972 SEASON

(D-04[A]) - MAIN FRAME AXLE BUILT PRIOR TO AUGUST, 1976 SEASON

(D-05) - MAIN FRAME AXLE, BUILT AUGUST 1976 SEASON AND SINCE

(D-06) - WHEEL AND HUB-MAIN FRAME

(D-07) - PRODUCT GRAPHICS

(D-08) - WING FRAME AXLE, BUILT PRIOR TO AUGUST, 1976 SEASON

(D-08[A]) - WING FRAME AXLE BUILT AUGUST, 1976 SEASON AND SINCE

(D-09) - WHEEL AND HUB, WING FRAME

(D-09[A]) - HITCH BUMPER 22-1/2 FOOT MODEL, PRIOR TO 1978 SEASON 31-1/2 FOOT, BUILT 1969 TO 1974 SEASON

(D-10) - GAUGE WHEEL, 31-1/2 FT.

(D-10[A]) - EXTENSIONS

(D-11) - WHEEL AND HUB, GAUGE WHEEL

(D-12) - HITCH AND HYDRAULIC MOUNTINGS, 22 FOOT 6 INCH PRIOR TO AUGUST 1976

(D-13) - HITCH AND HYDRAULIC MOUNTINGS, 31 FOOT 6 INCH PRIOR TO SEPTEMBER 1974

(D-14) - HITCH AND HYDRAULIC MOUNTINGS, 31 FOOT 6 INCH MODEL BUILT SEPTEMBER 1974 TO AUGUST 1976 SEASON

(D-15) - TRACTOR HITCH JACK 22'6" MODEL BUILT 1972 SEASON TO AUGUST 1762, 31"6" MODEL BUILT 1969-1974 SEASON

(D-15[A]) - TRACTOR HITCH JACK, 31 FOOT 6 INCH MODEL BUILT 1974 SEASON TO AUGUST, 1976 SEASON

(D-16) - TRACTOR HITCH, BUILT AUGUST, 1976 SEASON & SINCE

(D-17) - TRACTOR HITCH JACK, BUILT AUGUST, 1976 SEASON & SINCE

(D-17[A]) - SAFETY CHAIN EQUIPMENT

(D-18) - HAND WINCH ASSEMBLY, 22 FOOT 6 INCH MODEL ONLY BUILT PRIOR TO MAY 1973 SEASON

(D-19) - HAND WINCH WING LIFT, NOT FOR USE W/MULCHERS, 22' 6" MODEL BUILT 1969 SEASON TO MAY 1974 SEASON

(D-20) - WING FRAME AND LIFT PARTS, BUILT PRIOR TO AUGUST 1976 SEASON

(D-21) - HAND WINCH ASSEMBLY, 22 FOOT 6 INCH MODEL ONLY BUILT MAY 1973 SEASON TO MAY, 1974 SEASON

(D-22) - WING FRAME, 22 FOOT 6 INCH MODEL, BUILT AUGUST 1976 SEASON & SINCE

(D-23) - WING FRAME, 31 FOOT 6 INCH MODEL BUILT AUGUST, 1976 SEASON & SINCE

(D-24) - WING LIFT UNIT, 22 FOOT 6 INCH MODEL BUILT AUGUST, 1976 SEASON AND SINCE

(D-26) - WING LIFT UNIT, 31 FOOT 6 INCH MODEL BUILT AUGUST, 1976 SEASON AND SINCE

(D-27) - C-FRAME EXTENSIONS

(D-28) - MAIN AND WING FRAME ROCKSHAFTS, BUILT PRIOR TO AUGUST, 1976 SEASON

(D-30) - MAIN FRAME DEPTH CONTROL & ROCKSHAFT, BUILT AUGUST, 1976 SEASON AND SINCE

(D-31) - HAND LIFT, BUILT PRIOR TO JULY 1978

(D-32) - WING FRAME TRUSS ROD, 31 FOOT 6 INCH MODEL BUILT PRIOR TO AUGUST 1976 SEASON

(D-32[A]) - HYDRAULIC DIVERTER VALVE PUSH-PULL TYPE VALVE FOR USE ON 22 FOOT 6 INCH MODEL

(D-33) - WING LIFT HYDRAULICS

(D-34) - HYDRAULIC DIVERTER VALVE, LEVER TYPE VALVE ON 22 FOOT 6 INCH MODEL

(D-35) - WING LIFT HYDRAULICS, W/PUSH PULL DIVERTER VALVE, W/DUAL HYD CNTRL., 1965 TO 68 SEASON

(D-36) - WING LIFT HYDRAULICS, W/LEVER TYPE DIVERTER VALVE, W/SINGLE HYD CONTROL, 1968 TO 69 SEASON

(D-38) - WING LIFT HYDRAULICS, W/LEVER TYPE DIVERTER VALVE, W/DUAL HYD CONTROL, 1968 TO 69 SEASON

(D-39) - MAIN ROCKET CENTER EQUILIZER, W/DUAL CENTER FRAME ROCKSHAFT, W/ SINGLE VALVE HYD, 22'6" MODEL

(D-40) - WING LIFT HYDRAULICS, W/SINGLE MAIN ROCKSHAFT, W/SINGLE HYDRAULIC CONTROL 1969 SEASON TO 1974 SEASON

(D-41) - TRAILING HITCH

(D-42) - WING LIFT HYDRAULICS, W/SINGLE MAIN ROCKSHAFT, W/DUAL HYDRAULIC CONTROLS, 1969 SEASON TO 1974 SEASON

(D-44) - WING LIFT HYD,W/SINGLE MAIN ROCKSHAFT,W/SINGLE HYD CTRL UNIT,22'6" MODEL BUILT 1974 -AUG 1976 SEASON

(D-45) - WING LIFT HYD, W/SINGLE MAIN ROCKSHAFT, W/DUAL HYD CTRL, 22'6" MODEL BUILT 1974 TO AUG 1976 SEASON

(D-46) - WING LIFT HYD,W/SINGLE MAIN ROCKSHAFT,W/DUAL HYD CTRL,31'6" MODEL BUILT 1974 SEASON - AUG1976 SEASON

(D-47) - HYD CONNECTIONS,W/HYD WING LIFT,W/SINGLE CTRL HYD,22'6' MODEL BUILT PRIOR TO THE 1969 SEASON

(D-48) - HYD CONNECTIONS,W/HYD WING LIFT,W/DUAL CTRL HYD,22'6" MODEL BUILT PRIOR TO THE 1969 SEASON

(D-49) - HYDRAULIC CONNECTIONS, W/HYDRAULIC WING LIFT, W/SINGLE CONTROL HYD, BUILT 1969 SEASON TO 1974 SEASON

(D-50) - REMOTE CTRL HYD CYL, RECOMMENDED HYDS FOR TRAC W/ HYD SYSTEM RATED UP TO 3000 PSI

(D-51) - REMOTE CTRL HYD CYL, PRIOR TO AUG 1976 SEASN, RECOMM HYD FOR TRACTORS W/HYD SYST RATD UP T0 2500 PSI

(D-52) - REMOTE CTRL HYD CYL, RECOMMENDED HYD FOR TRAC W/ HYD SYSTEMS RATED UP TO 2500 PSI

(D-53) - REMOTE CTRL HYD CYL,,RECOMMENDED HYDS FOR TRAC W/ HYD SYS. RATED UP TO 2500 PSI

(D-54) - WING FRAME DEPTH CONTROL, BUILT AUGUST, 1976 SEASON & SINCE

(D-55) - WING LIFT HYDRAULIC SYSTEM, 22 FOOT 6 INCH MODEL BUILT AUGUST 1976 SEASON AND SINCE

(D-56) - WING LIFT HYDRAULIC SYSTEM, 31 FOOT 6 INCH MODEL BUILT AUGUST, 1976 SEASON AND SINCE

(D-57) - DEPTH CONTROL HYDRAULICS, CESSNA, OPT WITH CROSS HYD CYL TYPE, MODELS BUILT AUGUST 1976 SEASON&SINCE

(D-59) - DEPTH CONTROL HYDRAULICS, CROSS, OPT WITH CESSNA HYD CYL TYPE, BUILT AUGUST 1976 SEASON AND SINCE

(D-61) - ALTERNATE CHECK VALVE ASSY, USE W/DEPTH CONTROL FOR TRACTORS W/O CHECK VALVE

(D-62) - SLAVE HYDRAULIC CYLINDER, CROSS, AUGUST, 1976 SEASON AND SINCE

(D-63) - SLAVE HYDRAULIC CYLINDER, CESSNA, AUGUST, 1976 SEASON AND SINCE

(D-64) - MASTER HYDRAULIC CYLINDER, CROSS, AUGUST, 1976 SEASON AND SINCE

(D-66) - MASTER HYDRAULIC CYLINDER, CESSNA, AUGUST 1976 SEASON AND SINCE

(D-68) - WING LIFT HYDRAULIC CYLINDER, MODELS BUILT 1965 TO 1974 SEASON

(D-69) - WING LIFT HYDRAULIC CYLINDER, MODELS BUILT 1974 TO AUGUST 1976

(D-70) - WING LIFT HYDRAULIC CYLINDER - ALCO, 22 FOOT 6 INCH MODEL BUILT AUG 1976 SEASON AND SINCE

(D-71) - WING LIFT HYDRAULIC CYLINDER, PRINCE, 22 FOOT 6 INCH MODEL BUILT AUGUST 1976 SEASON & SINCE

(D-72) - WING LIFT HYDRAULIC CYLINDER, PNEU, HYD, 22 FOOT 6 INCH MODEL BUILT AUGUST 1976 SEASON AND SINCE

(D-73) - WING LIFT HYDRAULIC CYLINDER, CROSS, 31 FOOT 6 INCH MODEL BUILT AUG 1976 SEASON AND SINCE

(D-74) - WING LIFT HYDRAULIC CYLINDER, PRINCE, 31 FOOT 6 INCH MODEL BUILT AUG 1976 SEASON AND SINCE

(E-02) - MULCHER ATTACHMENT CARRIAGE ARM

(E-02[A]) - MULCHER EXTENSION, 1 FOOT 3 INCH 3 BAR, NOT WITH WING MODELS

(E-03) - 2 FOOT 3 INCH MULCHER, HINGED WING PAIR

(E-04) - 3 FOOT, 6 INCH MULCHER

(E-05) - 3 FOOT, 6 INCH BAR MULCHER

(E-05[A]) - 4 FOOT, 9 INCH MULCHER

(E-06) - 6 FOOT MULCHER

(E-06[A]) - 7 FOOT, 3 INCH MULCHER

(E-07) - 9 FOOT, 9 INCH MULCHER

(E-07[A]) - 12 FOOT, 3 INCH MULCHER

(E-08) - 14 FOOT, 9 INCH MULCHER

(F-02) - ROD WEEDER BOOT FRAME

(F-02[A]) - ROD WEEDER BOOT DRIVE

(F-03) - ROD WEEDER DRIVE WHEEL FRAME

(F-04) - ROD WEEDER DRIVE WHEEL & MOUNTING

(F-05) - ROD WEEDER BOOT DRIVE AND MOUNTING

(F-06) - ROD WEEDER MAIN DRIVE

(F-07) - ROD WEEDER AUXILIARY PTO DRIVE, HAYES, SPICER

(F-08) - ROD WEEDER ROD AND MOUNTING

(F-08[A]) - DRIVE WHEEL STOP ANGLE

(G-02A) - MAIN FRAME, 8 FOOT 6 INCH

(G-02A[A]) - C FRAME EXTENSION

(G-02B) - VIBRA TINE CULTIVATOR SHANK

(G-02B[A]) - VIBRA TINE GROUND WORKING TOOLS

(G-03) - GAUGE WHEEL

(G-04) - THREE POINT HITCH

(G-05) - EXTENSIONS

(G-05[A]) - C FRAME TRUSS ROD

(G-06) - 9 FOOT, 6 INCH MULCHER

(G-07) - 11 FOOT, 2 INCH MULCHER

(G-08) - 13 FOOT, 6 INCH MULCHER

(G-09) - 14 FOOT, 10 INCH MULCHER

(G-10) - SLOW MOVING VEHICLE EMBLEM, PRODUCT GRAPHICS