AVSPARE.COM
parts catalog
  1. Home
  2. Catalog parts
  3. Case catalog

(1466) - INTERNATIONAL 66 SERIES DIESEL TRACTOR (1/71-12/77) (10-49) - HYDRAULICS, DRAFT CONTROL Case Agriculture


1. TRACTORS
2. AGRICULTURAL
3. OVER 100 HP
4. (1466) - INTERNATIONAL 66 SERIES DIESEL TRACTOR (1/71-12/77)
5. (07) - HYDRAULICS
6. (10-49) - HYDRAULICS, DRAFT CONTROL


(10-49) - HYDRAULICS, DRAFT CONTROL Case:

(10-49) - HYDRAULICS, DRAFT CONTROL Parts scheme
  For full view, you need register

Parts on group (1466) - INTERNATIONAL 66 SERIES DIESEL TRACTOR (1/71-12/77):

Pos. Part No Qty Parts name Comments
1. 398353R91 [1]     P COVER w/two bearings, bushing and two oil seals, rear frame, gear drive tractors
1. 528195R92 [1]   COVER   IH w/two bearings, bushing and two oil seals, rear frame, 966 and 1066 hydrostatic drive and hydro 100 tractors Superseded by part number: 9823358, 1259628C1
. . 20203R1 [16]   BOLT,Hex, 5/8" - 11 x 3 7/8", Gr 5   IH SCREW, 5/8-11 x 3-7/8 hex-hd cap
. . 444776 [1]   PLUG,Sq Soc, 1/4"-18 NPTF   IH 1/4-18 sq-soc-pipe Superseded by part number: 221-841
2. 382774R2 [1]   BUSHING,70.78mm ID x 76.2mm OD x 80.26mm L   IH BEARING, rockshaft LH
3. 382775R2 [1]   BUSHING,76.85mm ID x 81.28mm OD x 80.26mm L   IH BEARING, rockshaft RH
4. 382776R91 [1]   OIL SEAL   IH rockshaft oil LH Superseded by part number: 1347918C1
5. 382778R91 [1]   OIL SEAL   IH rockshaft oil RH Superseded by part number: 1347919C1
6. 382798R1 [1]   BUSHING   IH eccentric shaft position control
7. 380264R2 [1]   GASKET   IH rear frame cover Superseded by part number: 380264R3
8. 382415R1 [1]   COVER   IH valve adj opening
. . 179814 [6]   SPACER   NNA Superseded by part number: 13-510, 13-510, 80179814
9. 382416R1 [1]   GASKET   IH valve adj opening cover Superseded by part number: 382416R2
. . 1017989R1 [4]   PLUG   IH 7/8-14 self aligning
. . 179841 [2]   BOLT,Hex, 3/8" - 16 x 1 1/4", Gr 5   IH 3/8-16 x 1-1/4 hex-hd cap Superseded by part number: 88011
. . 179885 [1]   BOLT,Hex, 1/2" - 13 x 1 1/2", Gr 5   IH Superseded by part number: 87689
. . 103321 [2]   LOCK WASHER,3/8"   IH WASHER, LOCK, 3/8" Superseded by part number: 80680
. . 103323 [1]   LOCK WASHER,1/2"   IH WASHER, LOCK, 1/2" Superseded by part number: 87326976
11. 384377R1 [1]   O-RING,0.103" Thk x 2.55" ID, -141, Cl 6, 90 Duro   IH 2-5/16 x 2-1/2 x 3/32, hyd component housing large Superseded by part number: 238-6141
12. 381884R1 [1]   O-RING,0.103" Thk x 0.987" ID, -120, Cl 6, 90 Duro   IH 1 x 1-3/16 x 3/32, hyd component housing small Superseded by part number: 272975
13. 386867R1 [1]   O-RING,0.103" Thk x 1.11" ID, -122, Cl 6, 90 Duro   IH 1-1/8 x 1-5/16 x 3/32, hyd component housing Superseded by part number: 238-6122
14. 382793R1 [1]   GASKET   IH quadrant support opening Superseded by part number: 382793R2
15. 532394R1 [1]   SUPPORT ASSY.   IH SUPPORT, draft control quadrant
. . 280161 [2]   BOLT,Hex, 3/8" - 16 x 3", Gr 5   NH
. . 25080R1 [2]     P SCREW, 3/8-16 x 3 flanged 12 PT
16. 382795R1 [1]   GASKET   IH quadrant support cover Superseded by part number: 382795R2
17. 382794R1 [1]   COVER   IH quadrant support
. . 179791 [3]   BOLT,Hex, 1/4" - 20 x 1/2", Gr 5   IH Superseded by part number: 88542
. . 372784R1 [1]   SCREW,Hex Wshr Hd, 1/4" - 20 x 3/4"   IH 1/4-20 x 3/4 C-Z hex washer hd cap
18. 24834R1 [1]   PIN   IH . 7/32 x 1-3/8 coiled spring
19. 532395R1 [2]   BUSHING,19.07mm ID x 20.63mm OD x 16.64mm L   IH BEARING, position control shaft
20. 532407R11 [1]     P LEVER ASSY, sensitivity control, 766 and 966 gear drive tractors, hydro 100 tractors
20. 532410R11 [1]     P LEVER ASSY, sensitivity control, 966 hydrostatic drive, 1066, 1466 and 1468 tractors
21. 532406R1 [1]   WASHER   IH SPACER, sensitivity lever
22. 382848R21 [1]   ROD   IH ASSY, position control, upper
23. 378619R11 [1]   GUIDE   IH ASSY, position control handle
. . 88542 [2]   BOLT,Hex, 1/4"-20 x 1/2", Gr 5   NH SCREW, 1/4-20 x 1/2 C-Z hex-hd cap
. . 492-11025 [2]   LOCK WASHER,1/4"   CAS WASHER, LOCK, 1/4" Superseded by part number: 80682, 72187247
24. 371600R2 [1]   HANDLE   IH KNOB, adjustable stop pin
25. 371599R2 [1]   LARGE PIN   IH PIN, adjustable stop
26. 378620R1 [1]   STOP   IH position control handle
. . 144417H [1]   NUT,1/4"-28, GB   IH 1/4-28 CDP ESNA stop Superseded by part number: 231-2444
. . 120392 [1]   WASHER,1/4", SAE   IH 9/32 x 5/8 x .051 C-Z Superseded by part number: 87361
27. 110668R1 [1]   CIRCLIP,#37, .300" Dia, E-Type   IH Ring, Retaining, , position control rod pin #37, .300" Dia, E-Type Superseded by part number: 86624102
28. 863138R91 [1]   PLASTIC RING   IH BEARING, sensitivity shaft
29. 350429R1 [1]   O-RING,0.103" Thk x 0.612" ID, -114, Cl 5, 75 Duro   IH 5/8 x 13/16 x 1/16, position control shaft Superseded by part number: 238-5114
30. 382847R1 [1]   TURNBUCKLE   IH position control rod
. . 114503 [1]   JAM NUT,Jam, 3/8"-16, G5   IH Superseded by part number: 329-146
31. 382846R1 [1]   ROD   IH position control, lower
32. 382803R2 [1]     P LEVER, positon control
33. 532399R1 [1]     P SPACER, position control lever
34. 382801R1 [1]   BALL   IH KNOB, position control handle
35. 539833R1 [1]   HANDLE   IH ASSY, position control, also order o-ring, 350429R1
37. 532401R2 [1]   SUPPORT   IH position control bearing
. . 192009 [1]     P NUT, 5/16-24 square
. . 181341 [1]   BOLT,Hex, 5/16" - 24 x 1 1/4", Gr 5   IH SCREW, 5/16-24 x 1-1/4 hex-hd cap Superseded by part number: 80280199
. . 532409R1 [1]   SPRING WASHER   IH safety spring
38. 532408R1 [1]   PLASTIC RING   IH BEARING, sensitivity control shaft
39. 379365R1 [1]   O-RING,0.07" Thk x 0.364" ID, -12, Cl 6, 90 Duro   IH 3/8 x 1/2 x 1/16, sensitivity control shaft Superseded by part number: 9993141
40. 382805R1 [1]   KNOB   IH sensitivity control handle
41. 65367C1 [1]   HANDLE   IH ASSY, sensitivity control bearing, 65369C1 and screw, also order support, 65368C1, 181341 on 766, Serial Range: -7611
42. 538543R1 [1]   QUADRANT   IH SECTOR, control quadrant
. . 186270 [3]   BOLT,Hex, 5/16" - 18 x 3 1/2", Gr 5   IH Superseded by part number: 86507008
. . 103320 [3]   LOCK WASHER,5/16"   IH WASHER, LOCK, 5/16" Superseded by part number: 322358, 83990583
43. 387926R2 [1]   RING   IH seal, Serial Range: cylinder-cover Superseded by part number: 1970904C1
. . 271560 [2]   PANEL,Hex, 5/8" - 11 x 1 3/4", Gr 5   NNA Superseded by part number: 413-1028, 413-1028, NLS
. . NLS [2]   NO LONGER SERVICED   BAS SCREW, 5/8-11 x 3-3/4 hex-hd cap
45. 382841R1 [1]   PIN   IH walking, Serial Range: beam-valve
47. 384515R12 [1]     P LINK ASSY, walking beam to valve, 766 and 966 gear drive tractors, hydro 100 tractors
47. 403984R1 [1]   LINK   IH ASSY, walking beam to valve, 966 hydrostatic drive, 1066, 1466 and 1468 tractors
48. 382842R1 [1]   SCREW,Shldr, Hex, 5/16" - 18 x 0.65", W/ Nylon Pellet   IH shoulder
50. 382786R1 [1]   LEVER   IH LINK, draft control eccentric to sensing lever, 766 and 966 gear drive tractors, hydro 100 tractors
50. 392226R1 [1]     P LINK, draft control eccentric to sensing lever, 966 hydrostatic drive, 1066, 1466 and 1468 tractors
51. 387414R1 [1]   ANCHOR   IH spring, part of cyliner & valve assy
52. 387413R1 [1]   SPRING   IH sensing arm return, 766 and 966 gear drive tractors, hydro 100 tractors
52. 392280R1 [1]   SPRING   IH sensing arm return, 966 hydrostatic drive, 1066, 1466 and 1468 tractors
53. 382788R1 [1]   PIN   IH sensing pick-up arm
54. 382787R2 [1]   ARM   IH draft control sensing pick-up, 766 and 966 gear drive tractors, hydro 100 tractors
54. 392225R2 [1]   ARM   IH draft control sensing pick-up, 966 hydrostatic drive, 1066, 1466 and 1468 tractors
55. 382828R91 [1]   LEVER   IH ECCENTRIC ASSY, draft control, 766 and 966 gear driver tractors, hydro 100 tractors
55. 392223R91 [1]   ASSEMBLY   IH ECCENTRIC ASSY, draft control, 966 hydrostatic drive, 1066, 1466 and 1468 tractors
58. 971043R1 [1]   SNAP RING,#50, Ext   IH Eccentric shaft #50, Ext Superseded by part number: 86514147
59. 355967R1 [1]   O-RING,0.364" ID x 0.003" Width   IH 3/8 x 1/2 x 1/16, eccentric shaft Superseded by part number: 86629543
60. 384399R91 [1]   ECCENTRIC   IH ASSY, position control Superseded by part number: 384399R92
61. 382838R1 [1]   LINK   IH , Serial Range: eccentric-rockshaft
63. 382843R11 [1]   BEAM   IH ASSY, follow-up walking
65. 382845R1 [1]   LINK   IH walking, Serial Range: beam-bellcrank
66. 104977R1 [1]   SNAP RING,#X31, .243" Dia, E-Type   IH RING, RETAINING, , Walking beam to bellcrank #X31, .243" Dia, E-Type Superseded by part number: 86624103
67. 370290R1 [1]   SNAP RING,#50, .392" Dia, E-Type   IH Ring, Retaining, , draft control eccentric #50, .392" Dia, E-Type Superseded by part number: 9635806
68. 384511R92 [1]   SUPPORT   IH ASSY, position control stop pivot Superseded by part number: 384511R93
. . 179840 [1]   BOLT,Hex, 3/8" - 16 x 1 1/8", Gr 5   IH SCREW, 3/8-16 x 1-1/8 hex-hd cap Superseded by part number: 413-618
. . 179842 [1]   SPACER   NNA 3/8-16 x 1-3/8 hex-hd cap Superseded by part number: 413-622
69. 382825R11 [1]   LEVER   IH BELLCRANK ASSY, position control
70. 204502R1 [1]   SNAP RING,#43, Ext   IH Position control bellcrank #43, Ext Superseded by part number: 100-1143
71. 381478R1 [1]   SNAP RING,#X43, .375" Dia, E-Type   IH Ring, Retaining, , draft control stop lever #X43, .375" Dia, E-Type Superseded by part number: 100-3344
72. 384513R11 [1]   LEVER   IH ASSY, draft control stop
73. 382818R1 [2]   RETAINER   IH rockshaft arm, 966 hydrostatic drive, 1066, 1466 and 1468 tractors
73. 388574R1 [2]   WASHER,16.51mm ID x 82.55mm OD x 4.78mm Thk   IH RETAINER, rockshaft arm washer, 766 and 966 gear drive tractors, hydro 100 tractors
. . 271556 [2]   WHEEL CYLINDER,Hex, 5/8" - 11 x 1 1/4", Gr 5   IH SCREW, 5/8-11 x 1-1-/4 hex-hd cap
74. 384518R11 [1]   CAM   IH SHAFT ASSY, rockshaft actuating hub
75. 398314R2 [1]   PIN,6.35mm OD x 76.2mm L   IH piston connecting rod
. . 103384 [1]   COTTER PIN,1/8" x 3/4"   IH Pin, Split (Cotter), 1/8" x 3/4" Superseded by part number: 80755
. . 16558R1 [1]   WASHER   IH 17/64 x 5/8 x .049 Superseded by part number: 95-31027
76. 382812R4 [1]   ROD   IH piston connecting
77. 382810R2 [1]   ROD   IH BELLCRANK, rockshaft Superseded by part number: 382810R3
78. 382811R1 [1]   SET SCREW,Hex, 3/8" - 16, Lok-Thd x 1 1/2", Cone Pt   IH rockshaft bellcrank lok-thread set
79. 388573R2 [1]   ROCKSHAFT   IH hydraulic draft control, 766 and 966 gear drive tractors, hydro 100 tractors
79. 392872R2 [1]   ROCKSHAFT   IH hydraulic draft control, 966 hydrostatic drive, 1066, 1466 and 1468 tractors Superseded by part number: 392872R3
80. 19984R1 [1]   TUBE NUT,7/16"-24   IH NUT, 7/16-24 hi-duty tube fitting for 1/4 tube, optional
. . 222-502 [1]   TUBE NUT,7/16"-24   CAS NUT, 7/16-24 hi-duty tube fitting for 1/4 tube, optional w/ 19984R1
81. 376057R1 [1]   BUCKET TOOTH KEY   IH KEY, rockshaft actuating hub cam
83. 382816R1 [1]   SET SCREW   IH rockshaft actuating hub cam set
84. 385942R91 [1]   TUBE   IH ASSY, cylinder lub
. . 179816 [1]   BOLT,Hex, 5/16" - 18 x 3/4", Gr 5   IH Superseded by part number: 87872
85. 65369C1 [1]   BUSHING,22.25mm ID x 23.8mm OD x 16.64mm L   IH BEARING, sensitivity control shaft, 766, Start Serial: 7612
86. 65368C1 [1]   SUPPORT   IH sensitivity control shaft brg, 766, Start Serial: 7612

Parts catalog (1466) - INTERNATIONAL 66 SERIES DIESEL TRACTOR (1/71-12/77):

(10-48) - HYDRAULICS, DOUBLE ACTING CHECK VALVE
(1466) - INTERNATIONAL 66 SERIES DIESEL TRACTOR (1/71-12/77) part catalog
(10-47) - HYDRAULICS, FEMALE COUPLER
(1466) - INTERNATIONAL 66 SERIES DIESEL TRACTOR (1/71-12/77) part catalog
(10-46) - HYDRAULICS, CYLINDER STORAGE HOOK
(1466) - INTERNATIONAL 66 SERIES DIESEL TRACTOR (1/71-12/77) part catalog
(10-45) - HYDRAULICS, CONTROL VALVE
(1466) - INTERNATIONAL 66 SERIES DIESEL TRACTOR (1/71-12/77) part catalog
(10-52) - HYDRAULICS, DRAFT CONTROL CYLINDER AND VALVE
(1466) - INTERNATIONAL 66 SERIES DIESEL TRACTOR (1/71-12/77) part catalog
(10-55) - HYDRAULICS, DRAFT SENSING, 966 HYDROSTATIC DRIVE, 1066, 1466 AND 1468 TRACTORS
(1466) - INTERNATIONAL 66 SERIES DIESEL TRACTOR (1/71-12/77) part catalog
(10-56) - HYDRAULICS, POWER BEYOND, ALL GEAR DRIVE TRACTORS
(1466) - INTERNATIONAL 66 SERIES DIESEL TRACTOR (1/71-12/77) part catalog
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.