ARTICULATED TRUCK Caterpillar SIS online


ARTICULATED TRUCK
725 ARTICULATED TRUCK AFX



Select model ARTICULATED TRUCK:



You can buy on Amazon: .



Information:

(For parts list, you need select model above)

AIR INLET AND EXHAUST SYSTEM
AFTERCOOLER GP

Aftercooler - Test 3176C and 3196 Engines for Caterpillar Built Machines

Cooling System Package (Radiator, Aftercooler, Refrigerant Condenser) - Remove 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Cooling System Package (Radiator, Aftercooler, Refrigerant Condenser) - Remove 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement


Improved Clamps and Brackets for the Air to Air After Cooler Tubes Provide Additional Clearance {1063, 1071} 2002/08/26
AIR CLEANER GP

Air Cleaner - Remove and Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement


New Inlet Seal for the Air Cleaner Improves Service Life {1051} 2002/10/07
New Warning Categories for Air Filter Inlet Air Restriction {1901, 7451, 7452, 7490, 7620} 2004/04/26

Engine Air Filter Secondary Element - Replace 725 and 730 Articulated Trucks
Engine Air Filter Primary Element - Clean/Replace 725 and 730 Articulated Trucks

Caterpillar Certified Procedure to Inspect and Clean Air Filters{1051, 1054} Caterpillar Certified Procedure to Inspect and Clean Air Filters{1051, 1054}

Air Filter Restricted Indictor May Illuminate at Low Hours or with Clean Filters Air Filter Restricted Indictor May Illuminate at Low Hours or with Clean Filters
EXHAUST GP

Exhaust Manifold - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines
Exhaust Extension - Remove and Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement


Remove the Restrictor In the Exhaust if You Disable the Arrangement for the Heated Body {1061} 2003/08/25
A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091} 2003/12/15
Special Instruction, REHS1840, "Installation of Exhaust Heated Body Kits" Is Available {1061} 2004/04/12
New Brackets in the Exhaust Body Arrangement Are Now Used {1061} 2007/08/06

Installation Guide for Particulate Trap Exhaust Filters{1091} Installation Guide for Particulate Trap Exhaust Filters{1091}
Installation of Exhaust Heated Body Kits{1061} Installation of Exhaust Heated Body Kits{1061}
Diesel Particulate Filter Monitoring System{1091, 7490} Diesel Particulate Filter Monitoring System{1091, 7490}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only{1000, 1091} Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only{1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only{1000, 1091, 7490} Generation 3 DPFdm Diagnostic Module Installation Manual - California Only{1000, 1091, 7490}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091} Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498} Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

PRODUCT SUPPORT PROGRAM FOR MAKING IMPROVEMENTS TO THE AIR CONDITIONER AND REPLACING THE AIR CONDITIONER/HEATER FUSE ON CERTAIN 725, 730, 730EJ, 735, 740, AND 740EJ ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR MAKING IMPROVEMENTS TO THE AIR CONDITIONER AND REPLACING THE AIR CONDITIONER/HEATER FUSE ON CERTAIN 725, 730, 730EJ, 735, 740, AND 740EJ ARTICULATED TRUCKS

319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D} 319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703} 188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
LINES GP-AIR

PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED ATAAC LINES AND INSTALLING CLAMPS ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED ATAAC LINES AND INSTALLING CLAMPS ON CERTAIN 725 AND 730 ARTICULATED TRUCKS
MANIFOLD GP-EXHAUST

Exhaust Manifold 3176C and 3196 Engines for Caterpillar Built Machines

Exhaust Temperature - Test 3176C and 3196 Engines for Caterpillar Built Machines
MANIFOLD GP-INLET
Inlet Manifold Pressure - Test 3176C and 3196 Engines for Caterpillar Built Machines

Inlet Manifold - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Inlet Manifold - Install 3176C and 3196 Engines For Caterpillar Built Machines
MUFFLER GP
Muffler - Remove and Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement


An Improved Mounting Arrangement for the Muffler Is Used {1062} 2006/11/13

Improvements for the Air Conditioner on Articulated Trucks{1062, 7320} Improvements for the Air Conditioner on Articulated Trucks{1062, 7320}

PRODUCT SUPPORT PROGRAM FOR MAKING IMPROVEMENTS TO THE AIR CONDITIONER ON CERTAIN 725, 730, 730 EJ, 735, 740, AND 740 EJ ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR MAKING IMPROVEMENTS TO THE AIR CONDITIONER ON CERTAIN 725, 730, 730 EJ, 735, 740, AND 740 EJ ARTICULATED TRUCKS
TURBOCHARGER GP

Turbocharger 3176C and 3196 Engines for Caterpillar Built Machines

Turbocharger - Inspect 3176C and 3196 Engines for Caterpillar Built Machines

Turbocharger - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Turbocharger - Install 3176C and 3196 Engines For Caterpillar Built Machines
Turbocharger - Remove and Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement


A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052} 2003/02/24
Policy for Reusing the Turbocharger Turbine Housing {1065} 2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052} 2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307} 2006/02/20
Troubleshooting the Wastegate Canister {1052, 1057} 2008/12/22
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053} 2010/03/22

A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052} 2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053} 2010/03/22

A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052} 2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053} 2010/03/22

Instructions for the Service Replacement of the Turbochargers{1052} Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers{1052} Installation Instructions for Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines{1052, 1053} Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines{1052, 1053}

PRODUCT IMPROVEMENT PROGRAM FOR REROUTING THE TURBO OIL SUPPLY LINE ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REROUTING THE TURBO OIL SUPPLY LINE ON CERTAIN 725 AND 730 ARTICULATED TRUCKS

CATERPILLAR REMAN PRODUCTS GROUP ANNOUNCES EXPANDED TURBOCHARGER COVERAGE FOR CERTAIN ENGINE MODELS CATERPILLAR REMAN PRODUCTS GROUP ANNOUNCES EXPANDED TURBOCHARGER COVERAGE FOR CERTAIN ENGINE MODELS
AFTERTREATMENT GP

Additional Requirements Are Required for Emission Compliance on Replacement Engines {1000, 775E} 2012/09/11
ASPHALT SPRAY SYSTEM
PUMP GP

Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073} Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6){5061, 5073} Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6){5061, 5073}
BASIC ENGINE
AIR COMPRESSOR GP

Air Compressor - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines
Air Compressor Drive Gear - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Air Compressor Drive Gear - Install 3176C and 3196 Engines For Caterpillar Built Machines

Repair Guidelines for Air Compressors {1803} 2003/08/25
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803} 2004/11/15
BELT TIGHTENER GP

Belt Tensioner 3176C and 3196 Engines for Caterpillar Built Machines

Belt Tensioner - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines

An Improved Idler Pulley is Now Available {1358} 2004/09/27
ENGINE BRAKE GP

CID 0791 FMI 05 Compression Brake Low/High Solenoid current low 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0791 FMI 06 Compression Brake Low/High Solenoid current high 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0792 FMI 05 Compression Brake Medium/High Solenoid current low 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0792 FMI 06 Compression Brake Medium/High Solenoid current high 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Compression Brake Solenoid Circuit - Test 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0788 FMI 02 Loss of Engine Retarder Selector Switch Signal 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CAMSHAFT GP

Camshaft 3176C and 3196 Engines for Caterpillar Built Machines

Excessive Bearing Wear - Inspect 3176C and 3196 Engines for Caterpillar Built Machines

Camshaft Gear - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines
Camshaft - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Camshaft - Install 3176C and 3196 Engines For Caterpillar Built Machines
Camshaft Bearings - Install 3176C and 3196 Engines For Caterpillar Built Machines

Visual Inspection of Camshaft Roller Followers{1102, 1123, 1209} Visual Inspection of Camshaft Roller Followers{1102, 1123, 1209}
CARRIER GP-SEAL

Crankshaft Rear Seal Carrier - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines
CRANKSHAFT GP

Crankshaft Seal (Front) 3176C and 3196 Engines for Caterpillar Built Machines
Crankshaft 3176C and 3196 Engines for Caterpillar Built Machines
Main Bearing Journal 3176C and 3196 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal 3176C and 3196 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal 3176C and 3196 Engines for Caterpillar Built Machines
Crankshaft Seal (Rear) 3176C and 3196 Engines for Caterpillar Built Machines

Main Bearings - Inspect 3176C and 3196 Engines for Caterpillar Built Machines

Bearing Clearance - Check 3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Rear Seal - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Rear Seal - Install 3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Front Seal - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Front Seal - Install 3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Main Bearings - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Main Bearings - Install 3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft - Install 3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Gear - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines

Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160} 2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202} 2006/01/16

420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230} 420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}

Thermal Spray Procedures for Crankshaft Main Bearing Saddle Area{0679, 1201, 1203} Thermal Spray Procedures for Crankshaft Main Bearing Saddle Area{0679, 1201, 1203}
Thermal Spray Procedures for Main Bearing Cap{1203} Thermal Spray Procedures for Main Bearing Cap{1203}
CYLINDER BLOCK GP

Cylinder Liner Projection 3176C and 3196 Engines for Caterpillar Built Machines
Cylinder Block 3176C and 3196 Engines for Caterpillar Built Machines
Piston Cooling Jet 3176C and 3196 Engines for Caterpillar Built Machines
Cylinder Liner 3176C and 3196 Engines for Caterpillar Built Machines
Cylinder Liner 3176C and 3196 Engines for Caterpillar Built Machines

Cylinder Block - Inspect 3176C and 3196 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect 3176C and 3196 Engines for Caterpillar Built Machines

Cylinder Liner - Install 3176C and 3196 Engines For Caterpillar Built Machines
Piston Cooling Jets - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines
Cylinder Liner - Remove 3176C and 3196 Engines For Caterpillar Built Machines

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK. PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.

Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317} Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317} Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705} Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}

Procedure to Install Inserts for the Top Deck on 3300, 3176, and D-Series Engines{0672, 0705, 0762, 1201, 1217} Procedure to Install Inserts for the Top Deck on 3300, 3176, and D-Series Engines{0672, 0705, 0762, 1201, 1217}
CYLINDER HEAD GP

Cylinder Head 3176C and 3196 Engines for Caterpillar Built Machines
Cylinder Head Valves 3176C and 3196 Engines for Caterpillar Built Machines

Engine Valve Lash - Inspect/Adjust 3176C and 3196 Engines for Caterpillar Built Machines

Valve Rotator or Spring Lock Is Free 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Electronic Unit Injector Sleeve - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Electronic Unit Injector Sleeve - Install 3176C and 3196 Engines For Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines
Cylinder Head - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Cylinder Head - Install 3176C and 3196 Engines For Caterpillar Built Machines
Inlet and Exhaust Valve Springs - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines

Caterpillar Warranty Claims on Cylinder Head Valves {1105} 2005/10/03

Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767} Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759} Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108} CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}

Engine Valve Failure Modes{1100, 1105} Engine Valve Failure Modes{1100, 1105}
Specifications for Cylinder Head Assemblies on 3176 and 3196 Engines{1100} Specifications for Cylinder Head Assemblies on 3176 and 3196 Engines{1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100} Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse of Cylinder Heads on C9,C-9 and 3176 Engines with Injector Tip Damage{1100, 1254} Reuse of Cylinder Heads on C9,C-9 and 3176 Engines with Injector Tip Damage{1100, 1254}
Thermal Spray Procedures for Cylinder Head{0679, 1100, 1101} Thermal Spray Procedures for Cylinder Head{0679, 1100, 1101}
DAMPER GP

Vibration Damper - Check 3176C and 3196 Engines for Caterpillar Built Machines

Vibration Damper and Pulley - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines

Crankshaft Vibration Damper - Inspect 725 and 730 Articulated Trucks
DRIVE GP-ACCESSORY

Accessory Drive - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Accessory Drive - Install 3176C and 3196 Engines For Caterpillar Built Machines
Accessory Drive - Disassemble 3176C and 3196 Engines For Caterpillar Built Machines
Accessory Drive - Assemble 3176C and 3196 Engines For Caterpillar Built Machines
DRIVE GP-FAN

Check Valve (Fan Drive Standby Pressure) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Check Valve (Fan Drive Standby Pressure) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

Belts - Inspect/Adjust/Replace 725 and 730 Articulated Trucks
ENGINE GP

Oil and Your Engine{1000} Oil and Your Engine{1000}

Performance Issues with 725, 730, 735, and 740 Articulated Trucks{1000, 3030, 3101} Performance Issues with 725, 730, 735, and 740 Articulated Trucks{1000, 3030, 3101}
FLYWHEEL GP

Flywheel Housing 3176C and 3196 Engines for Caterpillar Built Machines
Flywheel 3176C and 3196 Engines for Caterpillar Built Machines

Flywheel - Inspect 3176C and 3196 Engines for Caterpillar Built Machines

Flywheel - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Flywheel - Install 3176C and 3196 Engines For Caterpillar Built Machines

Specifications to Machine Reaction Faces of Flywheel Assemblies on 3176/C10 and 3196/C12 Engines{1156} Specifications to Machine Reaction Faces of Flywheel Assemblies on 3176/C10 and 3196/C12 Engines{1156}
GEAR GP

Gear Group (Front) 3176C and 3196 Engines for Caterpillar Built Machines

Gear Group (Front) - Time 3176C and 3196 Engines for Caterpillar Built Machines

Gear Group (Front) - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Gear Group (Front) - Install 3176C and 3196 Engines For Caterpillar Built Machines

An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206} 2012/12/13

An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206} 2012/12/14

Visual Inspection of Gear Shafts{1151, 1162, 1206} Visual Inspection of Gear Shafts{1151, 1162, 1206}
GUARD GP-BELT

Use the Correct Torque for the Bolts that Secure the Belt Guard {1357, 7174} 2002/07/22
HOUSING GP-FLYWHEEL

Flywheel Housing - Inspect 3176C and 3196 Engines for Caterpillar Built Machines

Flywheel Housing - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines

Change to Specifications Manual {1157} 2002/03/25
Change to Disassembly and Assembly Manual {1157} 2002/03/25
HOUSING GP-FRONT

Housing (Front) 3176C and 3196 Engines for Caterpillar Built Machines

Housing (Front) - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Front Cover - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Front Cover - Install 3176C and 3196 Engines For Caterpillar Built Machines
Housing (Front) - Install 3176C and 3196 Engines For Caterpillar Built Machines

C-12/3176C/3196 Front Housing Bolts {1151} 2007/08/20
Use the Correct Front Housing Bolts {1151} 2004/08/16

C-10, C-12, 3176C, and 3196 Bolts for the Front Housing{1151} C-10, C-12, 3176C, and 3196 Bolts for the Front Housing{1151}

Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162} Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
MOUNTING GP-ENGINE

Engine Front Mount - Remove 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Engine Front Mount - Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

PAN GP-OIL

Engine Oil Pan 3176C and 3196 Engines for Caterpillar Built Machines

Engine Oil Pan - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines
Crankcase Guard - Remove and Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Oil Pan - Remove and Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement


Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613} 2006/03/20

Engine Oil Level - Check 725 and 730 Articulated Trucks
Engine Oil and Filter - Change 725 and 730 Articulated Trucks
Engine Oil Sample - Obtain 725 and 730 Articulated Trucks

Obtaining Oil Sample for Analysis{1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542} Obtaining Oil Sample for Analysis{1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
PISTON & ROD GP

Connecting Rod 3176C and 3196 Engines for Caterpillar Built Machines
Piston and Rings 3176C and 3196 Engines for Caterpillar Built Machines

Engine Crankcase Pressure (Blowby) - Test 3176C and 3196 Engines for Caterpillar Built Machines
Compression - Test 3176C and 3196 Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect 3176C and 3196 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Inspect 3176C and 3196 Engines for Caterpillar Built Machines

Pistons and Connecting Rods - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Pistons and Connecting Rods - Install 3176C and 3196 Engines For Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble 3176C and 3196 Engines For Caterpillar Built Machines
Connecting Rod Bearings - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Connecting Rod Bearings - Install 3176C and 3196 Engines For Caterpillar Built Machines
Pistons and Connecting Rods - Assemble 3176C and 3196 Engines For Caterpillar Built Machines

Connecting Rods with Dual Bearing Tab Slots are OK to Use {1218} 2002/11/04
New Guidelines for Inspecting Pistons {1214} 2006/01/02
Multiple Configurations of Bearing Tab Slots Are Used on Connecting Rods for Certain C10 and C12 Machine Engines {1218, 1225, 1239} 2012/09/20

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines{1000, 1215} Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines{1000, 1215}

Connecting Rod Bearings Connecting Rod Bearings

Specifications for Connecting Rods on 3176 Engines{1218} Specifications for Connecting Rods on 3176 Engines{1218}
PULLEY GP

An Improved Idler Pulley Has Been Released {1358} 2005/07/04
PUMP GP-GEAR

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3){5061, 5073} Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3){5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps{5073} Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps{5073}

Bench Test Procedure for Gear Pumps{5073} Bench Test Procedure for Gear Pumps{5073}
TOOLS

Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000} Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000} Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
4C-9832 Large Engine Roll-Over Stand {0599, 0701} 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701} 9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781} Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738} 146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
SERPENTINE/V-BELTS

Belt Tension Chart 3176C and 3196 Engines for Caterpillar Built Machines
VALVE MECHANISM GP

Electronic Unit Injector Rocker Arm 3176C and 3196 Engines for Caterpillar Built Machines
Valve Mechanism Cover 3176C and 3196 Engines for Caterpillar Built Machines
Rocker Shaft 3176C and 3196 Engines for Caterpillar Built Machines
Valve Mechanism 3176C and 3196 Engines for Caterpillar Built Machines
Valve Rocker Arms and Lifters 3176C and 3196 Engines for Caterpillar Built Machines

Finding Top Center Position for No. 1 Piston 3176C and 3196 Engines for Caterpillar Built Machines

Excessive Valve Lash 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Valve Mechanism Cover - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines
Valve Mechanism Cover Base - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines
Rocker Shaft and Pushrod - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Rocker Shaft and Pushrod - Install 3176C and 3196 Engines For Caterpillar Built Machines
Lifter Group - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines

New Tightening Procedure for the Base of the Valve Mechanism Cover {1107} 2002/10/14
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209} 2012/10/08

Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209} 2012/10/08

Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209} 2012/10/08

Engine Valve Rotators - Inspect 725 and 730 Articulated Trucks
Engine Valve Lash - Check 725 and 730 Articulated Trucks

Valve Train Assembly for 3176, 3196, C-10, and C-12 Engines{1102, 1121, 1123} Valve Train Assembly for 3176, 3196, C-10, and C-12 Engines{1102, 1121, 1123}
BRAKING SYSTEM
ACCUMULATOR GP

Brake Accumulator (Service) 725 and 730 Articulated Trucks Braking System
Brake Accumulator (Parking) 725 and 730 Articulated Trucks Braking System
Brake Accumulator (Parking) 725 and 730 Articulated Trucks Braking System

Brake Accumulator (Service) - Test and Charge 725 and 730 Articulated Trucks Braking System
Brake Accumulator (Parking) - Test and Charge 725 and 730 Articulated Trucks Braking System
Brake Accumulator (Parking) - Test and Charge 725 and 730 Articulated Trucks Braking System

Brake Accumulator (Service) - Remove and Install 725 and 730 Articulated Trucks Machine Systems
Brake Accumulator (Parking) - Remove and Install 725 and 730 Articulated Trucks Machine Systems
Brake Accumulator (Parking) - Remove and Install 725 and 730 Articulated Trucks Machine Systems

New Service Interval for the Brake Accumulators {4263} 2004/11/29
New Accumulator Service Interval Now Used for Certain Articulated Trucks {4263} 2013/10/31

Changes to Accumulator Charging Equipment{4263} Changes to Accumulator Charging Equipment{4263}
Accumulator Discharging and Charging Procedures{0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474} Accumulator Discharging and Charging Procedures{0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}

PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW STEERING CYLINDER RELIEF VALVES AND REWORKING PARKING BRAKES ON CERTAIN 725, 730 EJECTOR, 730, 735, 740 EJECTOR, AND 740 ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW STEERING CYLINDER RELIEF VALVES AND REWORKING PARKING BRAKES ON CERTAIN 725, 730 EJECTOR, 730, 735, 740 EJECTOR, AND 740 ARTICULATED TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SERVICE BRAKE ACCUMULATOR DECALS ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SERVICE BRAKE ACCUMULATOR DECALS ON CERTAIN 725 AND 730 ARTICULATED TRUCKS
BRAKE GP

Parking Brake 725 and 730 Articulated Trucks Braking System

Parking Brake System 725 and 730 Articulated Trucks Braking System
Service Brake 725 and 730 Articulated Trucks Braking System
Parking Brake 725 and 730 Articulated Trucks Braking System
Parking Brake System 725 and 730 Articulated Trucks Braking System
Parking Brake System 725 and 730 Articulated Trucks Braking System
Braking System (Schematic) 725 and 730 Articulated Trucks Hydraulic Sub-System Schematics
Braking System (Schematic) 725 and 730 Articulated Trucks Hydraulic Sub-System Schematics

Service Brake Air - Purge 725 and 730 Articulated Trucks Braking System
Parking Brake Air - Purge 725 and 730 Articulated Trucks Braking System
Release Pressure for Parking Brake - Test 725 and 730 Articulated Trucks Braking System
Release Pressure for Parking Brake - Test 725 and 730 Articulated Trucks Braking System
Parking Brake Air - Purge 725 and 730 Articulated Trucks Braking System
Brake System Charging Pressure - Check 725 and 730 Articulated Trucks Braking System

Service Brake - Disassemble 725 and 730 Articulated Trucks Machine Systems
Service Brake - Assemble 725 and 730 Articulated Trucks Machine Systems
Parking Brake - Remove 725 and 730 Articulated Trucks Machine Systems
Parking Brake - Install 725 and 730 Articulated Trucks Machine Systems
Service Brake - Remove 725 and 730 Articulated Trucks Machine Systems
Service Brake - Install 725 and 730 Articulated Trucks Machine Systems
Parking Brake - Remove 725 and 730 Articulated Trucks Machine Systems
Parking Brake - Install 725 and 730 Articulated Trucks Machine Systems

Correction to Operation and Maintenance Manual , "Braking System - Test" {4251} 2001/08/20
Correction to Specifications , "Parking Brake" {4267} 2002/08/12
Brake Linings Are Available for High Temperature Applications on Articulated Trucks {4251} 2003/05/12
Procedures for Remanufacture of the Brake Discs {4008, 4051} 2007/08/27
Special Instruction, REHS2144, "Installation of Heavy Duty Brakes" Is Available {3278, 4251} 2004/04/19
New Bolts Are Used for the Pins on the Brake Group {4251} 2004/08/30
Dimensions to Produce Brake Lining Pad Thickness Gauge {4254, 4254} 2005/03/14
Guards for Reducing Wear of the Service Brakes Are Available {4251, 7150} 2005/05/09
Service Kits Are Available for the Parking Brake {4267} 2007/08/27
A Boot for the Parking Brake Actuator Is Used {4267} 2006/10/23
A New Bolt is Available to Retain the Caliper to the Spindle on Articulated Trucks {4251} 2007/10/29
An Orifice in the Brake Line Improves the Performance of the Low Brake Oil Pressure Switch {1408, 4257, 4267} 2007/11/26
An Orifice in the Brake Line Improves the Performance of the Parking Brake Switch {1408, 4257, 4267} 2007/12/10
Improvement to the Service Brakes {4251, 4251} 2009/10/23
A New Yoke For The Parking Brake Is Being Used {4267} 2010/03/04
Tooling To Improve The Torque Procedure For The Brake Actuators On Certain Articulated Trucks and Wheel Loaders Is Now Available {4267} 2010/05/13

Brake Pads - Check 725 and 730 Articulated Trucks
Brakes, Indicators and Gauges - Test 725 and 730 Articulated Trucks
Service Brakes - Clean 725 and 730 Articulated Trucks

Installation of Heavy Duty Brakes{3278, 4251} Installation of Heavy Duty Brakes{3278, 4251}
Procedure for Identifying and Correcting Brake Failure in Certain Articulated Trucks{4251} Procedure for Identifying and Correcting Brake Failure in Certain Articulated Trucks{4251}

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN PARK BRAKE ADJUSTER SLEEVE KITS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN PARK BRAKE ADJUSTER SLEEVE KITS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PARK BRAKE SWITCH ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE PARK BRAKE SWITCH ON CERTAIN 725 AND 730 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWITCH FOR THE PARKING BRAKE INDICATOR ON CERTAIN 725, 730, 735, 740 EJECTOR, AND 740 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWITCH FOR THE PARKING BRAKE INDICATOR ON CERTAIN 725, 730, 735, 740 EJECTOR, AND 740 ARTICULATED TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE HYDRAULIC TEST LINES, INSTALLING NEW INFORMATION WARNING PLATES, ADDING A FUEL LINE STRAP, AND/OR REPLACING THE PARKING BRAKE YOKE ON CERTAIN 725, 730, 735, 740 EJECTOR, AND 740 ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE HYDRAULIC TEST LINES, INSTALLING NEW INFORMATION WARNING PLATES, ADDING A FUEL LINE STRAP, AND/OR REPLACING THE PARKING BRAKE YOKE ON CERTAIN 725, 730, 735, 740 EJECTOR, AND 740 ARTICULATED TRUCKS

3V-0197 BOLTS MAY NOT HAVE THE PROPER HEAT TREATMENT 3V-0197 BOLTS MAY NOT HAVE THE PROPER HEAT TREATMENT
700 Family Articulated Truck - Ensure that the Locknut Is Discarded During the Replacement of the Yoke for the Parking Brake{4267} 700 Family Articulated Truck - Ensure that the Locknut Is Discarded During the Replacement of the Yoke for the Parking Brake{4267}
700 Family Articulated Trucks - Replacement Parts for the Adjuster on the Parking Brake Can Be Incorrectly Threaded{4267, 7750} 700 Family Articulated Trucks - Replacement Parts for the Adjuster on the Parking Brake Can Be Incorrectly Threaded{4267, 7750}

149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551} 149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731} 193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}

Procedure to Salvage Tang Slots on Transmission and Brake Pistons{0679, 3160, 4011, 4251} Procedure to Salvage Tang Slots on Transmission and Brake Pistons{0679, 3160, 4011, 4251}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents{4000, 4050, 4100, 4250, 4300} Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents{4000, 4050, 4100, 4250, 4300}
CONTROL GP

Brake Control Valve (Parking Brake) 725 and 730 Articulated Trucks Braking System
Brake Control Valve (Service Brake) 725 and 730 Articulated Trucks Braking System

Brake Control Valve (Service) 725 and 730 Articulated Trucks Braking System
Brake Control Valve (Parking) 725 and 730 Articulated Trucks Braking System

Retarder - Calibrate - Using the Caterpillar Electronic Technician 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Retarder - Calibrate - Using the Caterpillar Monitoring System 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System

MID 027 - CID 0681 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0681 - FMI 05 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0681 - FMI 06 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0681 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0681 - FMI 05 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0681 - FMI 06 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT

Brake Control Valve (Service) - Remove and Install 725 and 730 Articulated Trucks Machine Systems
Brake Control Valve (Service) - Remove and Install 725 and 730 Articulated Trucks Machine Systems

Service Brake Control 725 and 730 Articulated Trucks
Parking Brake Control 725 and 730 Articulated Trucks

Contamination of Fitting May Cause Unnecessary Replacement of Parking Brake Control Valve{4284} Contamination of Fitting May Cause Unnecessary Replacement of Parking Brake Control Valve{4284}
CYLINDER GP

Double Lip Wiper Seals Must Be Installed Properly {7562} 2002/12/09

Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562} Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
LINES GP

Hose for the Parking Brake Is Rerouted {4257} 2005/06/20
A Check Valve Maintains Charging Priority of the Brake System in High Ambient Conditions {5057, 5067} 2008/10/20

Installation of the 323-4207 Valve and Lines for 725,730 and 730 Ejector Articulated Trucks{5057, 5067} Installation of the 323-4207 Valve and Lines for 725,730 and 730 Ejector Articulated Trucks{5057, 5067}
REGULATOR GP

Piston Pump (Brake, Ejector and Fan) - Disassemble 725 and 730 Articulated Trucks Machine Systems
TANK GP

Hydraulic Tank 725 and 730 Articulated Trucks Braking System
Hydraulic Tank 725 and 730 Articulated Trucks Braking System
TOOLS

243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738} 2004/07/01
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784} 2004/12/27

Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700} Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000} HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057} 4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700} Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
VALVE GP

Check and Pressure Reducing Valve 725 and 730 Articulated Trucks Braking System

Check and Pressure Reducing Valve 725 and 730 Articulated Trucks Braking System

Solenoid Valve (Parking Brake) - Test 725 and 730 Articulated Trucks Braking System
Solenoid Valve (Parking Brake) - Test 725 and 730 Articulated Trucks Braking System
Pressure Reducing Valve (Hoist Pilot Pressure) - Test and Adjust 725 and 730 Articulated Trucks Braking System

Pump Control Valve (Brake) - Remove and Install 725 and 730 Articulated Trucks Machine Systems
Check and Pressure Reducing Valve (Brake Accumulator) - Remove 725 and 730 Articulated Trucks Machine Systems
Check and Pressure Reducing Valve (Brake Accumulator) - Install 725 and 730 Articulated Trucks Machine Systems

A New Shuttle Valve Is Available for the Brake Control {4289, 5051} 2004/11/29
A New Coil Assembly is Now Used {5479} 2011/05/04

700 Series Articulated Trucks, Brake Pressure Relief Valve Seal Failure, Fault Diagnosis 700 Series Articulated Trucks, Brake Pressure Relief Valve Seal Failure, Fault Diagnosis
PUMP GP

Piston Pump (Brake) 725 and 730 Articulated Trucks Braking System

Piston Pump (Brake) 725 and 730 Articulated Trucks Braking System

Pressure for Piston Pump (Brake) - Test 725 and 730 Articulated Trucks Braking System

Piston Pump (Brake) - Disassemble 725 and 730 Articulated Trucks Machine Systems
Piston Pump (Brake) - Assemble 725 and 730 Articulated Trucks Machine Systems
Piston Pump (Brake) - Remove 725 and 730 Articulated Trucks Machine Systems
Piston Pump (Brake) - Install 725 and 730 Articulated Trucks Machine Systems

A New Integral Seal Is Now Used on the Brake Pump {4268, 5070} 2008/01/21
COOLING SYSTEM
COOLANT CONDITIONER GP

Cooling System Coolant Sample (Level 1) - Obtain 725 and 730 Articulated Trucks
Cooling System Coolant Sample (Level 2) - Obtain 725 and 730 Articulated Trucks
COOLER GP

Engine Oil Cooler 3176C and 3196 Engines for Caterpillar Built Machines

Engine Oil Cooler - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Engine Oil Cooler - Install 3176C and 3196 Engines For Caterpillar Built Machines
Engine Oil Cooler - Remove 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Engine Oil Cooler - Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement


Special Instruction for Testing Oil Coolers {1378} 2003/11/24
100% Leak Testing of Oil Coolers {1378} 2007/04/23
Improvements for the Engine Oil Cooler Are Now Used {1378, 1380} 2007/10/01

100% Leak Testing of Oil Coolers {1378} 2007/04/30

PRODUCT LINE ADDITION: REMANUFACTURED OIL COOLERS FOR CERTAIN 3176, 3196, C9, C11 AND C13 ENGINE APPLICATIONS PRODUCT LINE ADDITION: REMANUFACTURED OIL COOLERS FOR CERTAIN 3176, 3196, C9, C11 AND C13 ENGINE APPLICATIONS
FAN GP

Suction Fan and Gear Motor (Hydraulic Fan) - Remove 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Suction Fan and Gear Motor (Hydraulic Fan) - Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Suction Fan and Gear Motor (Hydraulic Fan) - Remove 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Suction Fan and Gear Motor (Hydraulic Fan) - Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Gear Motor (Hydraulic Fan) - Disassemble 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Gear Motor (Hydraulic Fan) - Assemble 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement


An Improved Fan Motor is Available For Certain Articulated Trucks {1386} 2011/03/29
Historical Changes to the Gear Motor (Hydraulic Fan) for the Radiator on 700 Family Articulated Trucks {1386} 2014/01/23

Changes to the Test Lines for Articulated Trucks{1359, 4250, 4300, 4324, 5050, 5070, 5117} Changes to the Test Lines for Articulated Trucks{1359, 4250, 4300, 4324, 5050, 5070, 5117}

PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW RELIEF VALVE IN THE FAN MOTOR CIRCUIT OF CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW RELIEF VALVE IN THE FAN MOTOR CIRCUIT OF CERTAIN 725 AND 730 ARTICULATED TRUCKS
LINES GP-WATER

Water Temperature Regulator 3176C and 3196 Engines for Caterpillar Built Machines

Water Temperature Regulator - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines
Water Outlet Manifold - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Water Outlet Manifold - Install 3176C and 3196 Engines For Caterpillar Built Machines
Oil Cooler (Power Train) - Remove 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Oil Cooler (Power Train) - Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train

Improved Hose Clamps for the Coolant Lines Are Available {1380} 2006/05/22
Hump Hose Has Been Improved for Articulated Trucks {1380} 2009/11/05
Water Temperature Regulators (Thermostats) Have Been Redesigned {1355, 1380, 1393} 2013/04/17
A New Hump Hose is Available for Articulated Trucks {1380} 2010/02/11

Water Temperature Regulators (Thermostats) Have Been Redesigned {1355, 1380, 1393} 2012/12/19

Cooling System Water Temperature Regulator - Replace 725 and 730 Articulated Trucks
PUMP GP-WATER

Water Pump - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Water Pump - Install 3176C and 3196 Engines For Caterpillar Built Machines
Water Pump - Disassemble 3176C and 3196 Engines For Caterpillar Built Machines
Water Pump - Assemble 3176C and 3196 Engines For Caterpillar Built Machines
Water Pump - Remove 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Water Pump - Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement


A New Improved Seal Is Now Used in the Reman Water Pumps in the Engines of Certain Machines {1000, 1361, 7555} 2012/05/10
RADIATOR GP

Radiator Guard - Remove 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Radiator Guard - Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Radiator - Remove 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Radiator - Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Hydraulic Oil Cooler - Remove and Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Coolant Tank - Remove and Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement


An Improved Cover Is Now Used for the Left-Hand Radiator Guard on Certain Articulated Trucks {7155} 2011/09/29

Radiator Core - Clean 725 and 730 Articulated Trucks
Cooling System Pressure Cap - Clean/Replace 725 and 730 Articulated Trucks

PRODUCT SUPPORT PROGRAM FOR REPAIRING OR REPLACING THE RADIATOR CORE ON CERTAIN 725, 730, 735, 740EJ, AND 740 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPAIRING OR REPLACING THE RADIATOR CORE ON CERTAIN 725, 730, 735, 740EJ, AND 740 ARTICULATED TRUCKS
TANK GP-COOLANT

Improved Sealing for the Coolant Level Sight Gauge {1354, 1377} 2001/12/10
An Improved Sight Glass for the Coolant Tank Is Available {1377} 2006/07/17

PRODUCT SUPPORT PROGRAM FOR INSTALLING AN IMPROVED COOLANT SIGHT GAUGE ON CERTAIN 725, 730, 735, 740 EJECTOR, AND 740 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR INSTALLING AN IMPROVED COOLANT SIGHT GAUGE ON CERTAIN 725, 730, 735, 740 EJECTOR, AND 740 ARTICULATED TRUCKS

Sealing for the Coolant Level Sight Gauge Sealing for the Coolant Level Sight Gauge
TOOLS

Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542} 2004/12/01

Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060} Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
DIFFERENTIAL STEERING SYSTEM
MOTOR GP

General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors{5058, 5070} General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors{5058, 5070}
PUMP GP

Repair Process for Hydraulic Gear Pumps{5073} Repair Process for Hydraulic Gear Pumps{5073}
ELECTRICAL AND STARTING SYSTEM
ALARM GP

Backup Alarm 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Backup Alarm 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT

MID 030 - CID 0271 - FMI 03 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
MID 030 - CID 0271 - FMI 05 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
MID 030 - CID 0271 - FMI 06 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Backup Alarm Always Off 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Backup Alarm Always On 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Backup Alarm Always On 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Backup Alarm Always Off 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0271 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0271 - FMI 04 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0271 - FMI 05 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT

Backup Alarm 725 and 730 Articulated Trucks
Backup Alarm - Test 725 and 730 Articulated Trucks

Installation of 244-1090 Alarm Gp {7400, 7402, 7407} Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 262-6141 Alarm Gp {7406} Installation of 262-6141 Alarm Gp {7406}
ALTERNATOR GP-CHARGING

Alternator and Regulator 3176C and 3196 Engines for Caterpillar Built Machines

Alternator - Noisy Operation 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Charging System 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
MID 027 - CID 0168 - FMI 01 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0168 - FMI 01 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1251 - FMI 00 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1251 - FMI 01 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1251 - FMI 08 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Alternator - Charging Problem 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Alternator - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines
Alternator - Remove and Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement


Charging System Troubleshooting{1406} Charging System Troubleshooting{1406}
BATTERY GP

Battery - Test 3176C and 3196 Engines for Caterpillar Built Machines

CID 0168 FMI 02 System Voltage intermittent/erratic 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0168 FMI 01 System Voltage Low 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0168 FMI 00 System Voltage High 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Electrical Power Supply Circuit - Test 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Battery - Remove and Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement


Battery - Recycle 725 and 730 Articulated Trucks
Battery Disconnect Switch 725 and 730 Articulated Trucks
Engine Starting with Auxiliary Start Receptacle 725 and 730 Articulated Trucks
Circuit Breakers - Reset 725 and 730 Articulated Trucks
Engine Starting with Jump Start Cables 725 and 730 Articulated Trucks
Battery or Battery Cable - Inspect/Replace 725 and 730 Articulated Trucks

Battery Test Procedure{1401} Battery Test Procedure{1401}

Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B} Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Process for Communicating an Incident with a Battery{1401} Process for Communicating an Incident with a Battery{1401}
CIRCUIT BREAKER GP

Circuit Protection for the Engine ECM Is Now on the Engine Start Switch Circuit Breaker {1420, 1901} 2003/11/17
CONTROL GP-AIR STARTING

MID 027 - CID 0444 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0444 - FMI 05 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0444 - FMI 06 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
CONTROL GP-ELECTRONIC

Modulating Valve (Electronic Clutch Pressure Control) 725 and 730 Articulated Trucks Power Train
Modulating Valve (Electronic Clutch Pressure Control) 725 and 730 Articulated Trucks Power Train

Modulating Valve (Electronic Clutch Pressure Control) - Test 725 and 730 Articulated Trucks Power Train

An Improved Control Group is Used for the Caterpillar Monitoring System {7490} 2002/01/07
New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat <SUP>&reg;</SUP> Products {7610, 7620} 2014/02/06

The Installation and Operation of the Messenger Display{1408, 7451, 7490, 7610, 7620} The Installation and Operation of the Messenger Display{1408, 7451, 7490, 7610, 7620}
Instructions for Installing Seat Belt Reminder System on All Caterpillar Products{1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620} Instructions for Installing Seat Belt Reminder System on All Caterpillar Products{1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}

PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ENGINE SOFTWARE ON CERTAIN 725, 730, 735, 740, AND 740EJ ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ENGINE SOFTWARE ON CERTAIN 725, 730, 735, 740, AND 740EJ ARTICULATED TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CHASSIS ECM ON CERTAIN 725, 730, 735, 740, AND 740EJ ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CHASSIS ECM ON CERTAIN 725, 730, 735, 740, AND 740EJ ARTICULATED TRUCKS

FAULT CODE MAY APPEAR WHILE PERFORMING PI10199 FAULT CODE MAY APPEAR WHILE PERFORMING PI10199

Communication Adapter II{0600, 0709, 7600, 7610} Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490} Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
ELECTRONICS GP-ENGINE

ECM Will Not Communicate with Other Systems or Display Modules 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0268 FMI 02 Check Programmable Parameters 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Event Codes 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Self-Diagnostics 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Flash Programming 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0254 FMI 12 Electronic Control Module Error 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Electronic Service Tool Will Not Communicate with ECM 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Diagnostic Codes 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Replacing the ECM 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Cat Data Link Circuit - Test 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
System Configuration Parameters 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0248 FMI 09 Cat Data Link not communicating 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
System Overview 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
MID 027 - CID 0590 - FMI 02 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0590 - FMI 09 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0590 - FMI 12 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Programming Parameters 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
MID 027 - CID 0590 - FMI 02 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0590 - FMI 09 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0590 - FMI 12 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
CID 0253 FMI 02 Personality Module mismatch 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
ECM Will Not Accept Factory Passwords 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Electronic Control Module - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines

Correction to Information Regarding the Need for Timing Calibration after Replacing the Engine ECM {1901, 1912, 1912} 2002/03/11
New Service Information Tool for CAT Dealers is Now Available {1900} 2002/06/17
A Feature for Elevated Idle Speed Is Available {1276, 1408, 1435, 1901} 2014/03/05
New Engine Software Corrects Warnings of Air Filter Inlet Air Restriction {7620} 2004/11/08
New Engine Software Improves Reliability of the Air Filter Restriction System on Articulated Trucks {7620} 2005/04/04
New Factory Password System for Caterpillar Engines {1000, 1900} 2005/03/07
New Engine Software is Available {1901} 2008/01/21
Update on the Factory Password System {1901, 7620} 2008/02/11
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620} 2014/04/08
Procedure to Program Injector Trim Files When Injector Trim Files Are Missing in the ECM of Certain Machine Engines {1290, 1920} 2012/10/09
New Software Is Used on Certain Tier 3 Machine Engines {1901, 1920, 7620} 2014/04/23
New Engine Software Is Now Used for Certain 725 and 730 Articulated Trucks {1901, 1902, 1920} 2014/01/15

Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620} 2007/10/01

277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930} 2006/09/04
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620} 2007/10/22

Welding on Machines and Engines with Electronic Controls 725 and 730 Articulated Trucks

Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620} Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920} Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920} Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control{1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610} Diagnostic Code Information for Caterpillar ® Electronic Control{1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp{1901, 1920} Procedure to Flash the ADEM 3 Engine Electronic Control Gp{1901, 1920}

PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING THE ENGINE AND TRANSMISSION ECM ON CERTAIN 725 AND 730 ARTICULATED DUMP TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING THE ENGINE AND TRANSMISSION ECM ON CERTAIN 725 AND 730 ARTICULATED DUMP TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING ENGINE AND CHASSIS SOFTWARE, INSPECTING THE FRONT A-FRAME LOWER HITCH PIN, AND REWORKING THE TRANSMISSION GEAR SWITCH HARNESS RETAINER ON CERTAIN 725, 730, 735, 740, AND 740EJ ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING ENGINE AND CHASSIS SOFTWARE, INSPECTING THE FRONT A-FRAME LOWER HITCH PIN, AND REWORKING THE TRANSMISSION GEAR SWITCH HARNESS RETAINER ON CERTAIN 725, 730, 735, 740, AND 740EJ ARTICULATED TRUCKS

Checking the Electronic Control Module on Certain Machines{1901, 1902, 7610} Checking the Electronic Control Module on Certain Machines{1901, 1902, 7610}
ELECTRONICS GP-POWER TRAIN

General Information 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Lockup Clutch Function 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Hoist System Function 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Neutral Start Function 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Controlled Throttle Shifting Function 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Directional Shift Management Function 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Top Gear Function 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Engine Overspeed Function 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Torque Limiting Function 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Neutral Coast Function 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Rapid Downshift Function 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Elevated Downshift Function 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Tattletale Function 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Electronic Control Module (ECM) 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Differential Lock Function 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Parking Brake Function 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Secondary Steering Function 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Retarder Function 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Transmission Latching Function 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Gear Limit Function 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Transmission Shifting Function 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Cold Mode Function 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Transmission Hold Function 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Backup Alarm Function 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Ejector System Function 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Reverse Shift Inhibit Function 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Electronic Control Module (ECM) 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Hoist System Function 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Data Link 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Tattletale Function 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Retarder Function 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Differential Lock Function 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Lockup Clutch Function 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Neutral Start Function 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Transmission Hold Function 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Top Gear Function 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Cat Data Link 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System

Glossary of Electrical Terms 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Electronic Control Module (ECM) - Flash Program 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Electronic Control Module (ECM) - Replace 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Hoist System Enable - Check 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Glossary of Electrical Terms 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Hoist Lower Valve - Adjust 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Hoist Lower Valve - Adjust 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System

CID 0296 FMI 09 Unable to communicate with Transmission ECM 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
MID 027 - CID 0248 - FMI 09 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0967 - FMI 02 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0967 - FMI 09 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Diagnostic Code List 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Using Caterpillar Monitoring System to Determine Diagnostic Codes 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
General Information 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Diagnostic Capabilities 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Diagnostic Capabilities 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Diagnostic Code List 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Using the Operator Monitor to Determine Diagnostic Codes 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
General Information 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0967 - FMI 02 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0246 - FMI 09 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT

Special Instruction, REHS2149, "Explanation of Common Event Codes and Transmission Shift Matrix" is now Available {4800, 4808} 2004/06/21
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783} 2007/10/22
Managing Transmission Events {7610} 2011/06/08
Improved Power Train Software Group Is Now Used on Certain Articulated Trucks {7620} 2010/12/21
An Improved Procedure for Using an ECM for a Machine Test Is Now Available {7610} 2011/02/02

Explanation of Common Event Codes, Transmission Shift Matrix and Engine ECM Current Totals{4800} Explanation of Common Event Codes, Transmission Shift Matrix and Engine ECM Current Totals{4800}
ECM Replacement Procedure on 700 Series Articulated Trucks{7610} ECM Replacement Procedure on 700 Series Articulated Trucks{7610}
Procedure to Use a Machine Electronic Control Module (ECM) for Machine Testing{7610} Procedure to Use a Machine Electronic Control Module (ECM) for Machine Testing{7610}

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TORQUE CONVERTER SLEEVE BEARINGS AND RELATED PARTS ON CERTAIN 725, AND 730 ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TORQUE CONVERTER SLEEVE BEARINGS AND RELATED PARTS ON CERTAIN 725, AND 730 ARTICULATED TRUCKS

725/730 Transmission Software Calibration Problem 725/730 Transmission Software Calibration Problem
Procedure to Prevent Abnormal Rate of Data Diagnostic with the CAN Data Link {0785, 7610} Procedure to Prevent Abnormal Rate of Data Diagnostic with the CAN Data Link {0785, 7610}
ELECTRONICS GP-IMPLEMENT

New Test ECM Available for Hydraulics {7610} 2004/07/05
ELECTRONICS GP-MACHINE
Latest Software for the Power Train and the Messenger System Enables Access to the Messenger System {7490, 7620, 7620} 2006/03/20
A New Version of Caterpillar Electronic Technician (ET) is Now Available {0785, 7600, 7610} 2008/05/19
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620} 2011/10/20

Installation of the Machine Security System (MSS) Universal Attachment Kit{7631, 7631} Installation of the Machine Security System (MSS) Universal Attachment Kit{7631, 7631}
CONTROL GP-UNPROGRAMMED

Prerequisites for Flashing Software into Machine Electronic Control Modules {7620} 2001/11/19
INSTALLATION GP
Improved End - of - Line - Test Fixture for the Product Link Antenna is Now Used {7606} 2006/11/13
LIGHTING GP
Improved Signal Lamp for the Stop, Tail and Turn Signal Lights Is Used {1430, 1432} 2006/12/04
An Improved Halogen Lamp is Available for Lamp Group {1434} 2012/02/13

Installation of the Stop, Tail and Turn Signal Lights{1430, 1432} Installation of the Stop, Tail and Turn Signal Lights{1430, 1432}

The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
The Halogen Lamps in the Flood Lamp Group Fails on Certain Articulated Trucks{1429, 1434} The Halogen Lamps in the Flood Lamp Group Fails on Certain Articulated Trucks{1429, 1434}
MOTOR GP

Part Numbers for Electric Motors That Are Used in HVAC Have Changed {5927} 2000/10/30
The Length of the Wires Leading to the Wiper Motor Have Been Lengthened to Improve Reliability {5927, 7305} 2005/12/19
An Improved Starting Motor is Now Available {1453} 2009/10/15
An Improved Motor For The Air Conditioning Condenser Is Now Available {1805, 1815, 5927, 7320} 2009/05/11
A New Starter Solenoid is Now Available {1467} 2008/03/17
A New Wiper Motor is Now Used {5927, 7305} 2008/09/08

254-0204 Phase and Motor Rotation Tester{0374, 0599, 0709, 0734} 254-0204 Phase and Motor Rotation Tester{0374, 0599, 0709, 0734}
PANEL GP-CIRCUIT BREAKER

Circuit Breaker Harness Assembly{1420} Circuit Breaker Harness Assembly{1420}
PANEL GP-FUSE

Fuse Panel - Remove 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab
Fuse Panel - Install 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab
Fuse Panel - Remove 725 and 730 Articulated Trucks Machine Systems
Fuse Panel - Install 725 and 730 Articulated Trucks Machine Systems
SENDER GP

Senders 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System

MID 030 - CID 0096 - FMI 03 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
MID 030 - CID 0096 - FMI 08 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Fuel Level Sender 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
MID 030 - CID 0177 - FMI 04 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
MID 030 - CID 0177 - FMI 08 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
SENSOR GP

Engine Oil Pressure 3176C and 3196 Engines for Caterpillar Built Machines
Engine Oil Pressure Sensor 3176C and 3196 Engines for Caterpillar Built Machines
Turbocharger Outlet Pressure Sensor 3176C and 3196 Engines for Caterpillar Built Machines
Throttle Position Sensor 3176C and 3196 Engines for Caterpillar Built Machines
Fuel Temperature Sensor 3176C and 3196 Engines for Caterpillar Built Machines
Speed/Timing Sensor 3176C and 3196 Engines for Caterpillar Built Machines
Atmospheric Pressure Sensor 3176C and 3196 Engines for Caterpillar Built Machines
Coolant Temperature Sensor 3176C and 3196 Engines for Caterpillar Built Machines

Sensors 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Sensors 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Sensors 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT

Speed Sensor - Replace 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Speed Sensor - Adjust 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Transmission Control (Shift Lever) - Calibrate 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Retarder - Calibrate 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT

CID 0261 FMI 13 Engine Timing Calibration required 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Sensors and Electrical Connectors 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0100 FMI 04 Engine Oil Pressure short to ground 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0172 FMI 04 Intake Manifold Air Temp short to ground 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0174 FMI 03 Fuel Temperature open/short to +batt 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0174 FMI 04 Fuel Temperature short to ground 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0273 FMI 04 Turbo Outlet Pressure short to ground 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0274 FMI 04 Atmospheric Pressure short to ground 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Engine Pressure Sensor Open or Short Circuit - Test 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0041 FMI 04 8 Volt DC Supply short to ground 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Throttle Position Sensor Circuit - Test 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Digital Sensor Supply Circuit - Test 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
5 Volt Engine Pressure Sensor Supply Circuit - Test 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0091 FMI 08 Throttle Position signal abnormal 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
MID 030 - CID 0263 - FMI 03 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
MID 030 - CID 0263 - FMI 04 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Sensor Dynamic Operation 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Pulse Width Modulated Sensor 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
CID 0094 FMI 03 Fuel Pressure open/short to +batt 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0094 FMI 04 Fuel Pressure short to ground 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0110 FMI 04 Engine Coolant Temperature short to ground 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Sensor Signal Voltage 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
MID 027 - CID 0041 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0041 - FMI 04 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0177 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0177 - FMI 04 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0190 - FMI 02 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0585 - FMI 02 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0672 - FMI 08 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0673 - FMI 02 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0702 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0702 - FMI 04 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0702 - FMI 08 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Engine Speed/Timing Sensor Circuit - Test 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0041 FMI 03 8 Volt DC Supply short to +batt 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
MID 027 - CID 0773 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0773 - FMI 04 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0773 - FMI 08 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0826 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0826 - FMI 04 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1227 - FMI 02 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1233 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1233 - FMI 04 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
CID 0190 FMI 11 Engine Speed Sensor mechanical failure 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
MID 030 - CID 0100 - FMI 08 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
MID 030 - CID 0110 - FMI 08 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Engine Temperature Sensor Open or Short Circuit - Test 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Engine Speed/Timing Sensor - Calibrate 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0190 FMI 02 Loss of Engine Speed Signal 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0342 FMI 02 Loss of Secondary Engine Speed signal 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
MID 027 - CID 0672 - FMI 02 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0673 - FMI 02 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0702 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0702 - FMI 04 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0702 - FMI 08 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0700 - FMI 02 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0773 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0773 - FMI 04 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0773 - FMI 08 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0826 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0826 - FMI 04 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0041 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0041 - FMI 04 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0177 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0177 - FMI 04 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0190 - FMI 02 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1227 - FMI 02 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0190 - FMI 08 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0585 - FMI 08 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0672 - FMI 08 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0673 - FMI 08 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0585 - FMI 02 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
MID 027 - CID 2707 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 2707 - FMI 04 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0672 - FMI 02 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT

Engine Oil Pressure Sensor - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines
Coolant Temperature Sensor - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines
Camshaft Position Sensor - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Position Sensor - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines
Pressure Sensor (Transmission Clutch Latching) - Remove and Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Temperature Sensor (Transmission Oil) - Remove and Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Speed Sensor (Transmission) - Remove and Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train

Correction to Troubleshooting Manual, &quot;Sensor Signal Voltage&quot; {5574} 2004/09/20
Troubleshooting Column-Type Fuel Level Senders {5574, 7481} 2005/08/22
A New Temperature Sensor Is Now Used {1906, 1921, 1922} 2006/11/06
A New Throttle Pedal is Used in Articulated Trucks {1265, 1276, 1913} 2008/05/12
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562} 2013/02/28
An Improved Pressure Switch is Available on Articulated Trucks {1408} 2008/09/29
Improved Rotary Position Sensors for Transmission Shift Control Group On Certain Off-Highway Trucks and Articulated Trucks {3065, 5063, 5737} 2011/01/24

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553} Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Procedure for Replacement of the Transmission Shift Lever or Hoist Lever Sensor on Certain Off-Highway Trucks and Articulated Trucks{3065, 5063, 5737} Procedure for Replacement of the Transmission Shift Lever or Hoist Lever Sensor on Certain Off-Highway Trucks and Articulated Trucks{3065, 5063, 5737}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439} Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Procedure to Test the Position Sensor of a Hydraulic Cylinder{1439, 7562} Procedure to Test the Position Sensor of a Hydraulic Cylinder{1439, 7562}

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE JOYSTICK/SHIFTER SENSOR ON CERTAIN ARTICULATED TRUCKS AND WHEEL TRACTOR SCRAPERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE JOYSTICK/SHIFTER SENSOR ON CERTAIN ARTICULATED TRUCKS AND WHEEL TRACTOR SCRAPERS

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562} Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
SOLENOID GP

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Engine Cooling Fan Bypass Solenoid Circuit - Test 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1076 FMI 05 Engine Cooling Fan Bypass Solenoid open circuit 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1076 FMI 06 Engine Cooling Fan Bypass Solenoid short to ground 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
MID 027 - CID 0724 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0724 - FMI 05 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0724 - FMI 06 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0725 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0725 - FMI 05 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0725 - FMI 06 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Engine Fan Control Solenoid Circuit - Test 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
STARTING AID GP
CID 0545 FMI 05 Ether Start Relay open/short to +batt 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0545 FMI 06 Ether Start Relay short to ground 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Ether Injection System - Test 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456} 2013/09/24

Ether Starting Aid Cylinder - Replace 725 and 730 Articulated Trucks

Procedure for the Application of Grease to Certain Ether Cylinder Assemblies{1456} Procedure for the Application of Grease to Certain Ether Cylinder Assemblies{1456}
STARTING MOTOR GP

Introduction DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Delco Remy DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES

Starting Motor 37-MT, 41-MT, and 42-MT Series Starting Motors
Electric Starting Motor 3176C and 3196 Engines for Caterpillar Built Machines

General Information 37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description 37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation 37-MT, 41-MT, and 42-MT Series Starting Motors

Electric Starting System - Test 3176C and 3196 Engines for Caterpillar Built Machines
No Load - Test 37-MT, 41-MT, and 42-MT Series Starting Motors
Brush and Brush Holder - Check 37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust 37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test 37-MT, 41-MT, and 42-MT Series Starting Motors

Starting System 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear 37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly 37-MT, 41-MT, and 42-MT Series Starting Motors
General Information 37-MT, 41-MT, and 42-MT Series Starting Motors
Starting System 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT

Electric Starting Motor - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines
Starting Motor - Disassemble - 37-MT and 41-MT 37-MT, 41-MT, and 42-MT Series Starting Motors
General Information 37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT 37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT 37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT 37-MT, 41-MT, and 42-MT Series Starting Motors
Electric Starting Motor - Remove and Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement


Examine Failed Starting Motors to Understand the Reason for Failure {1453} 2002/10/28
An Improved Starting Motor Is Now Available {1453} 2007/10/22
Improvements Have Been Made to the Starter Cable for Articulated Trucks {1402, 1408} 2008/05/26

Caterpillar Remanufactured Electric Starting Motors Are Improved {1453} 2011/05/16

Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469} Caterpillar PRELUB® Diagnostics{1469}
SWITCH GP

Pressure Switch (Steering) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Pressure Switch (Stop Light, Transmission Signal) 725 and 730 Articulated Trucks Braking System
Pressure Switch (Parking Brake) 725 and 730 Articulated Trucks Braking System
Pressure Switch (Low Brake Pressure) 725 and 730 Articulated Trucks Braking System
Pressure Switch (Low Brake Pressure) 725 and 730 Articulated Trucks Braking System

Switches 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Relays 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Switches 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Relays 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Switches 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Pressure Switch (Refrigerant) All Products Air Conditioning and Heating R134a for All Caterpillar Machines

Engine Shutdown Switch Circuit - Test 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Switch Circuits 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
MID 027 - CID 0627 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0627 - FMI 04 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0704 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0704 - FMI 04 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0444 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0444 - FMI 05 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0444 - FMI 06 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0704 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0704 - FMI 04 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT

New Parking Brake Switch Improves Service Life {7332} 2005/05/16
New Cab Temperature Control Potentiometer Is Now Available {5721} 2007/09/17
Improved Procedure for Verifying the Operation of the Battery Disconnect System. {1411} 2009/05/04
New Advanced Efficiency Filters Are Now Available for the Transmission Assembly and the Torque Converter Assembly {1408, 1435, 3004, 3067, 5068} 2010/10/01
New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809} 2011/07/18
An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000} 2011/12/01

Procedure to Install the Horn Button{7332, 7402} Procedure to Install the Horn Button{7332, 7402}

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 2183262 PARKING BRAKE SWITCH ON CERTAIN 725, 730, 735, 740 AND 740 EJ ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 2183262 PARKING BRAKE SWITCH ON CERTAIN 725, 730, 735, 740 AND 740 EJ ARTICULATED TRUCKS

Machine Start Switch Key May Not Fit Properly{1416} Machine Start Switch Key May Not Fit Properly{1416}
TOOLS

Service Tools 37-MT, 41-MT, and 42-MT Series Starting Motors
Service Tools 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Service Tools 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Using Caterpillar Electronic Technician to Determine Diagnostic Codes 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Service Tools 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Electronic Service Tools 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Factory Passwords 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Operational Requirements Needed to Use the Dyno Mode Tool in Caterpillar Electronic Technician {0785} 2006/03/20
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785} 2002/02/11
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is Now Available {0785} 2002/08/19
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785} 2005/03/07
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782} 2006/11/27
Updated Instruction For The Bypass Harness {0785, 1408} 2008/03/17
New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606} 2013/08/15

The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785} 2004/04/19
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408} 2006/03/20
Enhanced Voltmeter Leads Are Now Available {0785} 2006/02/13
Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785} 2006/10/01

Procedure to Access the License Information for Caterpillar Electronic Technician (CAT ET){0785} Procedure to Access the License Information for Caterpillar Electronic Technician (CAT ET){0785}
An Aid To Reading Multimeter Scales{0785} An Aid To Reading Multimeter Scales{0785}

348-5430 Multi-Tool Gp 2 {0709, 0769, 0785} 348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
317-7484 Communications Adapter 3{1900, 4800, 7490, 7600} 317-7484 Communications Adapter 3{1900, 4800, 7490, 7600}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553} Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the Communications Adapter 3{1900} Using the Communications Adapter 3{1900}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709} 146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709} Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709} 131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
VALVE GP

Solenoid Valves 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Solenoid Valves 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT

MID 027 - CID 0709 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0709 - FMI 05 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0709 - FMI 06 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0971 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0971 - FMI 05 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0971 - FMI 06 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1100 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1100 - FMI 05 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1100 - FMI 06 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1235 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1235 - FMI 06 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1248 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1248 - FMI 05 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1248 - FMI 06 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1674 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1675 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1235 - FMI 05 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System

A New Solenoid Valve Group and A Coil Are Now Used {5479} 2009/02/09
WARNING GP
An Improved Horn Contact Kit is Now Available {7402} 2009/05/25
An Improved Backup Alarm is Now Available {7406} 2009/01/26
An Improved Backup/Travel Alarm is Now Available on Certain Machines {7406} 2010/03/15
WIRING GP

Electronic Unit Injector Wiring 3176C and 3196 Engines for Caterpillar Built Machines

Action Lamp 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Action Alarm 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Indicators 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System

Electrical Connector - Inspect 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Electrical Connector - Inspect 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Wiring Harness (Open Circuit) - Test 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Wiring Harness (Short Circuit) - Test 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT

Electrical Connectors - Inspect 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0283 FMI 05 Filter Restrict Lamp open/short to +batt 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Air Filter Restriction Lamp - Test 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0283 FMI 06 Filter Restrict Lamp short to ground 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
MID 030 - CID 0324 - FMI 03 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
MID 030 - CID 0324 - FMI 05 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
MID 030 - CID 0324 - FMI 06 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Alert Indicator Never Flashes 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Harness Code 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Electrical Component and Connector Locations 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Alert Indicator Is Always Flashing 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
MID 027 - CID 0144 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0144 - FMI 06 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0420 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0420 - FMI 05 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0420 - FMI 06 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0739 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0739 - FMI 06 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0968 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0968 - FMI 06 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1326 - FMI 02 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1586 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1586 - FMI 06 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Indicator Lamp for Differential Lock Does Not Illuminate During the Power Up Self Test 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Indicator Lamp for Differential Lock Is On Continuously 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Indicator Lamp for Retarder Does Not Illuminate During the Power Up Self Test 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Indicator Lamp for Retarder Is On Continuously 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Indicator Lamp for Transmission Hold Does Not Illuminate During the Power Up Self Test 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Indicator Lamp for Transmission Hold Is On Continuously 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0144 - FMI 05 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Electrical Component and Connector Locations 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Compression Brake Lamp Circuit - Test 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1586 FMI 05 Retarder Indicator Lamp open circuit 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1586 FMI 06 Retarder Indicator Lamp short to ground 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Power Supply Circuit of Electronic Control Module 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0420 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0420 - FMI 05 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0420 - FMI 06 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Power Supply Circuit of Electronic Control Module 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0144 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0144 - FMI 05 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0144 - FMI 06 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0650 - FMI 02 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1292 - FMI 04 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Electrical Component and Connector Locations 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0650 - FMI 05 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1837 - FMI 04 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1838 - FMI 04 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Engine Wiring Information 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553} 2012/05/04
New Multifunction Switches Improve High Beam Actuator Service Life {7332} 2002/04/29
New Parking Brake Switch Group Improves Service Life {7332} 2002/06/17
New Bracket Eliminates Cab Harness Interference {1408} 2005/08/01
Improved Pressure Switch Now Used {1435} 2004/04/19
Two New Multifunction Switches Are Now Used {7332} 2005/05/02
A New Lens for the Rear Signal Lamp Is Available {1430} 2006/06/26
A New Flasher Assembly is Now Used {4493} 2006/08/07
Service of the Machined Terminals and the Stamped and Formed Terminals {7553} 2006/11/13
The Product Link and the Automatic Lubrication System Can Now Be Connected {1408, 7540, 7606} 2007/02/12
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408} 2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408} 2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556} 2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459} 2012/09/21
An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324} 2013/11/12

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408} 2010/05/13

Hood Control 725 and 730 Articulated Trucks
Fuses - Replace 725 and 730 Articulated Trucks

Cross-Reference for Electrical Connectors{7553} Cross-Reference for Electrical Connectors{7553}
Installation Procedure for 257-4183 Injector Wiring Harness Kit {1408} Installation Procedure for 257-4183 Injector Wiring Harness Kit {1408}
Ampseal 16 Connector Peripheral Seal Servicing{7553} Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553} Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Guidelines for Routing and Installing Wire Harness Assemblies{1408, 7553} Guidelines for Routing and Installing Wire Harness Assemblies{1408, 7553}
Repair Procedure for Damaged Harness Wiring{1408} Repair Procedure for Damaged Harness Wiring{1408}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324} Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 2446861 PARKING BRAKE SWITCH ON CERTAIN 725, 730, 730 EJ, 735, 740, AND 740 EJ ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 2446861 PARKING BRAKE SWITCH ON CERTAIN 725, 730, 730 EJ, 735, 740, AND 740 EJ ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 2136947 AND 2666477 PRESSURE SWITCHES ON CERTAIN 725, 730, AND 730EJ ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 2136947 AND 2666477 PRESSURE SWITCHES ON CERTAIN 725, 730, AND 730EJ ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-6947 OR THE 266-6477 PRESSURE SWITCHES ON CERTAIN 725, 730, AND 730EJ ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-6947 OR THE 266-6477 PRESSURE SWITCHES ON CERTAIN 725, 730, AND 730EJ ARTICULATED TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR CLAMPING HARNESSES ON CERTAIN 725, 730, AND 740 ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR CLAMPING HARNESSES ON CERTAIN 725, 730, AND 740 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR INSTALLING AN IMPROVED MULTI FUNCTION COLUMN SWITCH ON CERTAIN D250E II, D300E II, D350E II, D400E II EJECTOR, D400E II, 725, 730, 735, 740 EJECTOR, AND 740 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR INSTALLING AN IMPROVED MULTI FUNCTION COLUMN SWITCH ON CERTAIN D250E II, D300E II, D350E II, D400E II EJECTOR, D400E II, 725, 730, 735, 740 EJECTOR, AND 740 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR ENGINE SHUTDOWNS ON CERTAIN 725, 730, 735, 740, 740EJ ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR ENGINE SHUTDOWNS ON CERTAIN 725, 730, 735, 740, 740EJ ARTICULATED TRUCKS

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408} Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
ELECTRONICS GP-MONITOR

Tattletale Mode 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
General Information 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Related Components 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Service Meter Mode 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Scrolling Mode 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Main Display Module 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Units Mode 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Service Mode 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Warning Operation 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Modes of Operation 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Normal Mode 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Harness Code Mode 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Alert Indicator Description 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Component Description 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Tachometer Mode 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Odometer Mode 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Numeric Readout Mode 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Calibration Mode 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System

Glossary of Terms 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
System Self Test 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Module - Replace 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Main Display Module Initialization - Adjust 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Main Display Module - Flash Program 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Connector Contact Description of Main Display Module 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System

MID 030 - CID 0248 - FMI 02 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
MID 030 - CID 0821 - FMI 03 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
MID 030 - CID 0821 - FMI 04 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
MID 030 - CID 0819 - FMI 02 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
General Information 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Accessing Diagnostic Information 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Using Caterpillar Electronic Technician to Determine Diagnostic Codes 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Diagnostic Code List 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Initial Troubleshooting Procedure 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System

The Messenger Display System Is Available {7490, 7610, 7620} 2005/04/18
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link 522 Systems {7494, 7606, 7620} 2012/12/10
HEATER GP

Installation Instructions for Jacket Water Heaters with Seal Kits{1383} Installation Instructions for Jacket Water Heaters with Seal Kits{1383}
ELECTRONICS GP-COMMUNICATION

New Flash File Software Is Used for Product Link 151/201 {7606, 7620} 2002/07/15
New Flexible Antenna Whip Available for Product Link {7606} 2002/12/02
Product Link Cellular Is Now Available {7602} 2004/08/02
Correction to Special Instruction, REHS2143, "Product Link PL-102C System Installation" {7602} 2004/08/02
Correction to Special Instruction, &quot;Product Link PL102C System Installation&quot; and Systems Operation, Testing and Adjust, &quot;Product Link PL102C&quot; {7602} 2004/12/13
New PC Service Tool Software Released for Cellular Based Product Link {7620} 2004/12/20
Correction to Special Instruction, "Product Link PL102C System Installation" {7620} 2004/12/13
Procedure to Identify which COM PORT the USB Device Is Occupying and the Procedure to Change the Default COM PORT Setting {7606} 2005/01/10
New Product Link Software Available for PL151 and PL201 {7606} 2005/01/10
New Product Link Systems Are Now Available {7606} 2005/02/07
New Software Available for Product Link PL-151 and PL-201 {7620} 2005/05/02
New Product Link Software Is Now Available {7606, 7620} 2005/12/19
New Software Available for Product Link {7606, 7620} 2006/10/16
New Product Link Software Is Now Available {7606, 7620} 2007/05/14
New Product Link Hardware Is Now Available {7606} 2007/05/07
New Software for Product Link is Now Available {7606, 7620} 2008/03/10
New Software for Product Link is Now Available {7606, 7620} 2008/05/19
New Software is Now Used for the Product Link PL121SR and PL321SR Systems {7606, 7620} 2009/10/15
New Software for Product Link (PL300) Is Now Available {7606, 7620} 2011/10/11
New Software Is Now Available for Product Link (PL 121) {7602, 7610, 7620} 2011/12/15
Improved Process for Activating Product Link PL522 On Assets In China {7606} 2012/11/19
Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606} 2012/12/20
New Software Is Now Available For Product Link 522 Systems On All Cat<SUP>&reg;</SUP> Products {7606, 7620} 2013/04/22
Improved VisionLink<SUP>TM</SUP>Store is Now Available for all Caterpillar Products {7606} 2013/03/29
Device Transfers Are Now Supported In VisionLink<SUP>TM</SUP> Store {7606} 2013/03/29
Improved VisionLink<SUP>TM</SUP> Store for Minimizing Delay in Appearance of VisionLink Store - Modules is Now Available for All Caterpillar Products {7606} 2013/03/29
New Product Link Software for PL121 and PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7610, 7620} 2013/05/02
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link 522 System {7606} 2013/09/27
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620} 2013/07/08
New Software Is Now Available For All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620} 2013/08/19
Procedure for Improving Antenna Communication on All Machines Equipped With Product Link {733B, 7606} 2013/09/16
Improvements for Products and Systems Connected to Product Link {7606} 2013/10/02
New Product Link Software for PL300 Is Now Available for All Cat <SUP>&reg;</SUP>Products {7606, 7620} 2013/10/21
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link PL421 or Product Link PL420 System {7606} 2013/10/02
Improved Product Link Satellite System Special Instruction guide {7606} 2013/12/20
New Software for Product Link PL522 Module Is Now Available {7606} 2014/03/04

Product Link PL-102C System Installation{7606} Product Link PL-102C System Installation{7606}
Installation Guide for Product Link PL121SR and PL321{7606} Installation Guide for Product Link PL121SR and PL321{7606}
Operation of Product Link{7606} Operation of Product Link{7606}
Product Link PL121SR{7606} Product Link PL121SR{7606}
Release Notes for VisionLink and VisionLink Store for All Caterpillar Products{7606} Release Notes for VisionLink and VisionLink Store for All Caterpillar Products{7606}

Product support program for updating software on all machines equipped with PL121s and PL321s Product Link Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321). PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR
PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING SOFTWARE ON THE PRODUCT LINK 300 MODULE FOR CERTAIN CATERPILLAR PRODUCTS PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING SOFTWARE ON THE PRODUCT LINK 300 MODULE FOR CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE PRODUCT LINK SOFTWARE ON CERTAIN 725, 730, 735, 735B, 740, 740B, 740EJ, D250E, D25C, D350E, AND D400E ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR UPDATING THE PRODUCT LINK SOFTWARE ON CERTAIN 725, 730, 735, 735B, 740, 740B, 740EJ, D250E, D25C, D350E, AND D400E ARTICULATED TRUCKS

Product Link Antenna Placement{7606} Product Link Antenna Placement{7606}
Product Link Hours Versus Service Meter Hours Accuracy Issue{7606} Product Link Hours Versus Service Meter Hours Accuracy Issue{7606}
Maintenance Mode Clock Issue for PL300{7606} Maintenance Mode Clock Issue for PL300{7606}
Product Link PL321 May Accumulate 24 Hours Daily{7606} Product Link PL321 May Accumulate 24 Hours Daily{7606}
Registration of Product Link in EquipmentManager{7606} Registration of Product Link in EquipmentManager{7606}
Location Updates Are Not Being Reported From The Product Link PL321{7606} Location Updates Are Not Being Reported From The Product Link PL321{7606}
Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat<SUP>&reg;</SUP> Machines Equipped With VIMS3G{7601, 7620} Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat® Machines Equipped With VIMS3G{7601, 7620}
CAMERA GP

Generic Installation of the WAVS Cleaning System{7348} Generic Installation of the WAVS Cleaning System{7348}
RADIO GP

PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRODUCT LINK PL321 ON CERTAIN CATERPILLAR PRODUCTS PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRODUCT LINK PL321 ON CERTAIN CATERPILLAR PRODUCTS
ENGINE ARRANGEMENT
ENGINE AR

Engine Design 3176C and 3196 Engines for Caterpillar Built Machines

Low Engine Oil Pressure 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Engine Stalls at Low RPM 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Engine Overspeeds on Start-up 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
E190 Engine Overspeed Warning 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Engine Vibration 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Engine, Torque Converter and Transmission - Remove 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Engine from Torque Converter and Transmission - Separate 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Engine, Torque Converter and Transmission - Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Engine to Torque Converter and Transmission - Connect 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Engine, Torque Converter and Transmission - Remove 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Engine, Torque Converter and Transmission - Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement


A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000} 2001/01/08
Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000} 2012/08/28
A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000} 2002/03/25
Responsibilities for Emission Certified Engines {1000} 2005/10/03
Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000} 2009/04/27
Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000} 2013/04/17
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570} 2011/02/17

Improved Registration Process for Retrofit Products {1000, 7000} 2011/04/15

Storage Procedure For Caterpillar Products{0355, 1000, 7000} Storage Procedure For Caterpillar Products{0355, 1000, 7000}
Instructions to Register the Retrofit{1000, 3000, 7000, 7570} Instructions to Register the Retrofit{1000, 3000, 7000, 7570}

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752} A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

211-1635 Engine Transmission Support Group{1000, 3000} 211-1635 Engine Transmission Support Group{1000, 3000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000} 142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562} HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
TOOLS

New Kits Are Available to Repair Cracks and Threads in Ductile Iron {0676, 0685} 2006/02/06

Using Lock-N-Stitch Procedures for Casting Repair{0676, 0685} Using Lock-N-Stitch Procedures for Casting Repair{0676, 0685}
FRAME AND BODY
BODY GP-TRUCK

Truck Body - Remove 725 and 730 Articulated Trucks Machine Systems
Truck Body - Install 725 and 730 Articulated Trucks Machine Systems

New Recommendation for Lubrication of Bearings {4303, 5107, 7200, 7201, 7258, 7271, 7424} 2003/09/22
Alternative Drainage for Dump Body {7250, 7258} 2004/04/19

Body Pivot Bearings - Lubricate 725 and 730 Articulated Trucks
Frame and Body - Inspect 725 and 730 Articulated Trucks

Installation and Adjustment of Truck Body{7258, 7258} Installation and Adjustment of Truck Body{7258, 7258}
Field Installation of Body Liners{7250, 7258} Field Installation of Body Liners{7250, 7258}

Check the ECM Output if You Have a Body Hoist or Eject Problem Check the ECM Output if You Have a Body Hoist or Eject Problem

725, 730, 735, &amp; 740 Truck Body Supports{0599, 0629, 0635, 0700, 5102, 7258} 725, 730, 735, & 740 Truck Body Supports{0599, 0629, 0635, 0700, 5102, 7258}
FENDER GP

Fender - Remove and Install 725 and 730 Articulated Trucks Machine Systems
Fender - Remove and Install 725 and 730 Articulated Trucks Machine Systems

Special Instruction, REHS0034-04 for Repairing the Nonmetallic Fenders, Machine Hoods and Tank Covers is Now Updated {1273, 7251, 7252} 2000/11/13
Correct Installation of the Mud Deflectors {4220, 7252} 2001/03/19
Door Stop Has Been Relocated {7252, 7253} 2001/06/18
The Fenders Have Been Improved in Order to Increase Service Life {7252} 2003/10/06
A New Storage Position for the Mud Guards Is Available when the Machine Is Transported {4220} 2006/05/22
Improved Support Assemblies for Articulated Trucks {7252} 2007/10/08
Articulated Trucks Now Have Pre-Greased Hinges {7252} 2008/09/29

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CAST ALUMINUM STEPS ON CERTAIN 725, 730, 735, 740, AND 740EJ ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CAST ALUMINUM STEPS ON CERTAIN 725, 730, 735, 740, AND 740EJ ARTICULATED TRUCKS
FRAME GP

Front Frame and Rear Frame - Separate 725 and 730 Articulated Trucks Machine Systems
Front Frame and Rear Frame - Connect 725 and 730 Articulated Trucks Machine Systems

Procedure for Removal and Installation of the Bushing for the Oscillating Hitch {7051, 7113} 2013/10/31

Replacement of the Steering Brackets for the Steering Cylinders{4303, 7051} Replacement of the Steering Brackets for the Steering Cylinders{4303, 7051}
GUARD GP

A Modification to the Crankcase Guard Improves Access to the Torque Converter and Transmission Oil Filter {3067, 3101, 7151} 2005/11/28
The Crankcase Guards Can Be Reinforced {7151} 2007/02/26
New Handrail Assembly for Articulated Trucks {7256} 2008/05/19
An Improved Crankcase Guard Gp Is Now Used {7151} 2011/05/20

Rework of the Handrail Guards for Articulated Trucks{7150, 7253, 7256} Rework of the Handrail Guards for Articulated Trucks{7150, 7253, 7256}

PRODUCT SUPPORT PROGRAM FOR REPLACING A CRACKED LEFT HAND FRONT HANDRAIL ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING A CRACKED LEFT HAND FRONT HANDRAIL ON CERTAIN 725 AND 730 ARTICULATED TRUCKS
HITCH GP

Oscillating Hitch - Remove 725 and 730 Articulated Trucks Machine Systems
Oscillating Hitch - Install 725 and 730 Articulated Trucks Machine Systems

Special Instruction, REHS1010, "Salvage of the Hitch" is now Available {7113} 2002/04/22
Improved Support for the Hitch Hydraulic Hoses Improves Service Life {5057} 2002/07/29
Cleanliness of Hitch Pins is Important During Assembly {7113} 2004/11/29
An Improved Hitch Pin for the Oscillating Hitch Is Used {7113} 2007/03/12

Oscillating Hitch 725 and 730 Articulated Trucks
Oscillating Hitch - Lubricate 725 and 730 Articulated Trucks
Oscillating Hitch - Adjust 725 and 730 Articulated Trucks

Salvage of the Hitch{7100, 7113} Salvage of the Hitch{7100, 7113}

Thermal Spray Procedures for ADT Hitch{0679, 7113} Thermal Spray Procedures for ADT Hitch{0679, 7113}
HOOD GP

Hood - Remove 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Hood - Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement


The Nameplate Is Now Bolted to the Grill {7251, 7557} 2003/08/04
Raising the Hood with an Inoperative Hood Tilt Actuator {7275} 2004/05/10
A New Hood Tilt Actuator Is Available {1427, 7251} 2006/03/13
An Adjustable Bracket for the Hood Tilt Actuator Is Available {7251} 2006/03/27

Adjustment Procedure for the Hoods on the 725, 730, 735, 740, and the 740 Ejector Articulated Trucks{7251} Adjustment Procedure for the Hoods on the 725, 730, 735, 740, and the 740 Ejector Articulated Trucks{7251}

PRODUCT SUPPORT PROGRAM FOR REPLACING THE HOOD TILT ACTUATOR ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HOOD TILT ACTUATOR ON CERTAIN 725 AND 730 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR BETTER SECURING THE HOOD INSULATION PANELS ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR BETTER SECURING THE HOOD INSULATION PANELS ON CERTAIN 725 AND 730 ARTICULATED TRUCKS
LINER GP

Body Liners are Available to Protect the Truck Body on Certain Articulated Trucks {7269} 2014/01/31
LINES GP
Connector for Charging the Automatic Lubrication System {7510, 7540} 2012/04/26
LINK GP-STEERING FRAME LOCK

Steering Frame Lock 725 and 730 Articulated Trucks
LUBRICATION GP

Autolube Tool Kit Is Available {7540} 2004/11/29
Special Instruction, REHS2054, "Automatic Lubrication System" Is Available {7540} 2004/12/20
A Bracket for the Automatic Lubrication System Is Available {7510, 7540} 2005/09/12
Redesigned Lubrication Pumps Improve Service Life {7516, 7540} 2005/12/19

Automatic Lubrication System{7540} Automatic Lubrication System{7540}

700 Series Articulated Trucks, Automatic Lubrication Tool Kit 700 Series Articulated Trucks, Automatic Lubrication Tool Kit
725 &amp; 730 Articulated Trucks, Automatic Lubrication System to Product Link Connection 725 & 730 Articulated Trucks, Automatic Lubrication System to Product Link Connection
SEAL GP

Assembly and Installation of Inverted Duo-Cone Seals{7561} Assembly and Installation of Inverted Duo-Cone Seals{7561}
TAILGATE GP

Special Instruction, REHS1155, "Field Installation of Scissor Tailgate Arrangements" is now Available {7271} 2002/01/14
Special Instruction, REHS1155, "Field Installation of Scissor Tailgate Arrangements" is now Available {7271} 2002/03/11
Revised Special Instruction, REHS1155, "Field Installation Of Scissor Tailgate Arrangements" Is Available {7271} 2004/04/12
New Hardware Is Available for the Chains for the Tailgate Scissors {7271} 2004/12/20
New Hardware Is Available for the Lubrication of the Pivots on the Tailgate {7271} 2005/10/24
Improved Tailgate Arrangements Are Used for Articulated Trucks {7271} 2008/06/23
New Hardware is Used to Secure the Tailgate for Articulated Trucks {7271} 2008/02/11

Tailgate 725 and 730 Articulated Trucks
Tailgate and Tailgate Cylinder Bearings - Lubricate 725 and 730 Articulated Trucks

Field Installation Of Scissor Tailgate Arrangements{7271} Field Installation Of Scissor Tailgate Arrangements{7271}
Field Installation of Underslung Tailgates{7271} Field Installation of Underslung Tailgates{7271}
TOOLS

148-0357 Front Strut Handling Group {0374, 0599, 0632, 0700, 0756} 148-0357 Front Strut Handling Group {0374, 0599, 0632, 0700, 0756}
SUSPENSION GP

Suspension Cylinder (Front) - Purge and Charge 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

New Valves for the Suspension Cylinder Are Available {7201, 7214} 2005/05/16
Wear Limits for Improved Mounts for the Rear Suspension {7200} 2007/08/27
FUEL SYSTEM
FILTER GP-FUEL

Fuel Filter Base - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Fuel Filter Base - Install 3176C and 3196 Engines For Caterpillar Built Machines
Fuel Filter (Primary) and Fuel Filter Base - Remove and Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Fuel Filter (Secondary) and Fuel Filter Base - Remove 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Fuel Filter (Secondary) and Fuel Filter Base - Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement


A New Check Valve is Available for the Fuel Filter Base {1262} 2003/09/29
New Fuel Filter Base Has Been Released {1262} 2003/12/01
An Alternative Bowl Is Available for the Water Separator and Fuel Filter {1261, 1263} 2005/07/04
Improved Seal on Fuel Filter {1261} 2005/09/12
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263} 2007/07/30
New Primary Fuel Filters are Available {1260, 1261} 2008/07/14

Fuel System Primary Filter - Clean/Inspect/Replace 725 and 730 Articulated Trucks
Fuel System Secondary Filter - Replace 725 and 730 Articulated Trucks

Installation of Fuel/Water Separator{1260, 1263} Installation of Fuel/Water Separator{1260, 1263}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348} Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}

295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280} 295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
FUEL SYSTEM GP
370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280} 284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280} 284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713} Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706} 169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
GOVERNOR GP

Specifications and Salvage for Cylinder Blocks on 3176 Engines Specifications and Salvage for Cylinder Blocks on 3176 Engines
LINES GP-FUEL

Fuel Lines 3176C and 3196 Engines for Caterpillar Built Machines

Fuel Manifold - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Fuel Manifold - Install 3176C and 3196 Engines For Caterpillar Built Machines

A Two Piece Clip and Grommet Are Used On the Fuel Lines On Certain C7 Through C18 Machine Engines {1250, 1250, 7553} 2013/09/02
LINES GP-FUEL INJECTION
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254} 2008/12/01
MISCELLANEOUS INFORMATION
The Procedure For Tightening The Clamping Bolt For The Unit Injector Has Changed {1250, 1290} 2002/10/21
NOZZLE GP-UNIT INJECTOR
The Procedure for the Installation of the Electronic Unit Injector has changed. {1290} 2004/05/10
Replace the Fuel Injector Hold-Down Bolt When You Service the Electronic Unit Injectors on Engines, Including Remanufactured Engines with Serial Number Prefix 3LZ, AKB, ALS or R1D {1251, 1254} 2006/03/27
PUMP GP-FUEL INJECTION

Electronic Unit Injector Mechanism 3176C and 3196 Engines for Caterpillar Built Machines
Electronic Unit Injector 3176C and 3196 Engines for Caterpillar Built Machines

Electronic Unit Injector - Adjust 3176C and 3196 Engines for Caterpillar Built Machines
Electronic Unit Injector - Test 3176C and 3196 Engines for Caterpillar Built Machines

Injector Solenoid Circuit - Test 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0001 FMI 11 Cylinder #1 Injector fault 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0002 FMI 11 Cylinder #2 Injector fault 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0003 FMI 11 Cylinder #3 Injector fault 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0004 FMI 11 Cylinder #4 Injector fault 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0005 FMI 11 Cylinder #5 Injector fault 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0006 FMI 11 Cylinder #6 Injector fault 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Electronic Unit Injector - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Electronic Unit Injector - Install 3176C and 3196 Engines For Caterpillar Built Machines

Improved O-Ring Seals for Fuel Injectors for Longer Seal Life {1254} 2003/10/20
The Procedure for the Removal of the Electronic Unit Injector has Changed. {1290} 2004/05/10

THE INJECTOR PUSHROD NEEDS TO BE CHECKED AND REPLACED IN CERTAIN C-10, C-12, 3176C AND 3196 ENGINES THE INJECTOR PUSHROD NEEDS TO BE CHECKED AND REPLACED IN CERTAIN C-10, C-12, 3176C AND 3196 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK

Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286} Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
PUMP GP-FUEL PRIMING

Fuel Priming Pump 3176C and 3196 Engines for Caterpillar Built Machines

Fuel System - Prime 3176C and 3196 Engines for Caterpillar Built Machines

Fuel Priming Pump - Remove and Install 3176C and 3196 Engines For Caterpillar Built Machines

Replacement of the Priming Pump {1258, 1263} 2007/12/24
An Improved Fuel Priming Pump Gasket Is Now Used on Certain Machine Engines {1258, 7555} 2011/09/15
An Improved Hand Operated Fuel Priming Pump Is Available {1258} 2012/10/04

An Improved Hand Operated Fuel Priming Pump Is Available {1258} 2012/11/26

An Improved Hand Operated Fuel Priming Pump Is Available {1258} 2012/10/08

Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258} Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}

PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES

Inspect the Check Valve in the Fuel Filter Base if You Have Starting Problems or if the Engine Runs Rough Inspect the Check Valve in the Fuel Filter Base if You Have Starting Problems or if the Engine Runs Rough
Faulty Fuel Priming Pumps on Various Engines Faulty Fuel Priming Pumps on Various Engines
PUMP GP-FUEL TRANSFER

Fuel Transfer Pump 3176C and 3196 Engines for Caterpillar Built Machines

Fuel Transfer Pump - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Fuel Transfer Pump - Install 3176C and 3196 Engines For Caterpillar Built Machines

A New Mounting Gasket for the Fuel Transfer Pump is Available {1256} 2011/07/08
A new Fuel Transfer Pump Has Been Released {1256} 2005/05/23
SEPARATOR GP-WATER

Fuel System Water Separator - Drain 725 and 730 Articulated Trucks
TANK GP-FUEL

MID 027 - CID 0096 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT

Fuel Tank - Remove 725 and 730 Articulated Trucks Machine Systems
Fuel Tank - Install 725 and 730 Articulated Trucks Machine Systems

A Special Instruction, REHS1294, "Procedure for the Installation of the Fast Fuel Fill Arrangement" Is Available {1273} 2002/08/05
Updated Fuel Tank Caps Are Now Available {1273} 2004/03/15
Updated Fuel Tank Caps Are Now Available {1273} 2013/03/22
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000} 2005/12/19
A New Mounting Bracket for the Fuel Tank Is Now Used {1273} 2007/08/13

Fuel Tank Cap and Strainer - Clean 725 and 730 Articulated Trucks
Fuel Tank Water and Sediment - Drain 725 and 730 Articulated Trucks

Procedure for the Installation of the Fast Fuel Fill Arrangement{1273} Procedure for the Installation of the Fast Fuel Fill Arrangement{1273}

PRODUCT SUPPORT PROGRAM FOR REWORKING FUEL TANKS ON CERTAIN 725, 730, AND 730 EJECTOR ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REWORKING FUEL TANKS ON CERTAIN 725, 730, AND 730 EJECTOR ARTICULATED TRUCKS
TOOLS

9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706} 9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280} Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
VALVE GP-CHECK

PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL CHECK VALVE ON CERTAIN 966G-II AND 972G-II WHEEL LOADERS, AND 725 AND 730 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL CHECK VALVE ON CERTAIN 966G-II AND 972G-II WHEEL LOADERS, AND 725 AND 730 ARTICULATED TRUCKS
HYDRAULIC SYSTEM
ACCUMULATOR GP

Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474} Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
ACTUATOR GP

Proportional Solenoid (Hoist) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Pilot Control Actuator (Hoist Lower) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Pilot Control Actuator (Hoist Raise) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Proportional Solenoid (Hoist) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

MID 027 - CID 0724 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0724 - FMI 05 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0724 - FMI 06 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0725 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0725 - FMI 05 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0725 - FMI 06 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT

New Retaining Ring Kit for the Pilot Control Actuator Group on the Hoist Control Valve Group is Now Available {5078, 5136} 2001/06/18
COOLER GP

Check Valve may be Incorrectly Installed in the Cooling Fan Oil Return to Tank Line Check Valve may be Incorrectly Installed in the Cooling Fan Oil Return to Tank Line
COUPLING GP

Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057} 2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057} 2004/06/28
CYLINDER GP

Hoist Cylinder 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Tailgate Cylinder 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

Hoist Cylinder - Remove 725 and 730 Articulated Trucks Machine Systems
Hoist Cylinder - Install 725 and 730 Articulated Trucks Machine Systems
Tailgate Cylinder - Remove 725 and 730 Articulated Trucks Machine Systems
Tailgate Cylinder - Install 725 and 730 Articulated Trucks Machine Systems
Tailgate Cylinder - Remove and Install 725 and 730 Articulated Trucks Machine Systems
Tailgate Cylinder - Remove and Install 725 and 730 Articulated Trucks Machine Systems

Improved Hoist Cylinders Are Used {5102} 2006/10/30
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562} 2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562} 2010/04/30
Hoist Cylinders that are Painted Black are Used {5102} 2011/05/20
A New Hoist Cylinder Bearing is Available From Parts Service for Certain Articulated Trucks {5102} 2012/05/04

Hoist Cylinder Bearings - Lubricate 725 and 730 Articulated Trucks

Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562} Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562} Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562} Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process{7562} Hydraulic Cylinder Repair Process{7562}
Hydraulic Cylinder Honing{7562} Hydraulic Cylinder Honing{7562}

PRODUCT SUPPORT PROGRAM FOR REPAIRING THE HOIST CYLINDER EYES ON CERTAIN 725, 730, 735 AND 740 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPAIRING THE HOIST CYLINDER EYES ON CERTAIN 725, 730, 735 AND 740 ARTICULATED TRUCKS

Surface Finishes of Cylinder Bores{7562} Surface Finishes of Cylinder Bores{7562}
Applying Grease to the Hoist Cylinder Bearings{5102} Applying Grease to the Hoist Cylinder Bearings{5102}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562} Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738} Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 250-6597 Cylinder Washer Tank Group {0374, 0599, 0680, 0738} Procedures for Using the 250-6597 Cylinder Washer Tank Group {0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562} 1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562} Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095} 4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738} Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738} Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Hydraulic Cylinder Seal Failure Analysis{7555, 7562} Hydraulic Cylinder Seal Failure Analysis{7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components{7562} Inspection and Salvage of Hydraulic Cylinder Components{7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders{5100, 7562} Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders{5100, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562} Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
DRIVE GP

An Improved Lip Type Seal Is Available for the Pump Drive {3108, 7555} 2006/02/06
FILTER GP
A Replacement Filter Is Incorrectly Identified {5050, 5068} 2002/12/23
Optional High Efficiency Filters Are Now Available {3004, 5068} 2003/07/07
Improved Differential Pressure Switch Now Available {3004, 3067, 5068} 2003/08/11

Oil Filter - Inspect 725 and 730 Articulated Trucks

Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579} Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095} 188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
LINES GP

Diagnosing Problems with the Cooling Fan Speed {1359, 1386, 1387, 5057} 2003/12/01
The 6V-8633 Connector Has Changed {5057, 7553} 2005/11/28
Replacements for the Check Valve and the Solenoid Valve Are Available for the Fan System (Coolant) {1359, 1386, 1387, 5057} 2006/06/26

358-4530, 358-4532, and 358-4533 Hose Machine Group Set-Up and Operation{0599, 0684} 358-4530, 358-4532, and 358-4533 Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057} Crimputer III Setup and Operation{0684, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057} Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057} Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057} Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057} 243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
LINES GP-HOIST

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 173-8522 TUBE ASSEMBLIES ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 173-8522 TUBE ASSEMBLIES ON CERTAIN 725 AND 730 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPAIRING OIL LEAKS AT THE HOIST VALVE PILOT OIL TUBE ON CERTAIN 725, 730, 735, AND 740 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPAIRING OIL LEAKS AT THE HOIST VALVE PILOT OIL TUBE ON CERTAIN 725, 730, 735, AND 740 ARTICULATED TRUCKS
LINES GP-HYDRAULIC

Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057} 2006/02/13

Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057} Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}

242-3567 Variable Crimp Die Bowl{0684} 242-3567 Variable Crimp Die Bowl{0684}
LINES GP-HYDRAULIC FAN

Bypass Valve 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
MOTOR GP
Gear Motor (Hydraulic Fan) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Gear Motor (Hydraulic Fan) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

A New Gear Motor for the Hydraulic Fan Is Available {5061} 2006/04/17

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors{3203, 4351, 5058, 5070} Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors{3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070} Test Specifications for Vane Cartridges{0784, 5058, 5070}

PRODUCT SUPPORT PROGRAM FOR INSTALLING A CHECK VALVE AND A NEW DIVERTER VALVE IN THE HYDRAULIC CONTROL SYSTEM FOR THE COOLING FAN ON CERTAIN 725, 730, AND 730 EJECTOR ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR INSTALLING A CHECK VALVE AND A NEW DIVERTER VALVE IN THE HYDRAULIC CONTROL SYSTEM FOR THE COOLING FAN ON CERTAIN 725, 730, AND 730 EJECTOR ARTICULATED TRUCKS

700 Family Articulated Truck - Gear Motor for the Fan System Has Been Shipped with Incorrect Part Number.{5061} 700 Family Articulated Truck - Gear Motor for the Fan System Has Been Shipped with Incorrect Part Number.{5061}

Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551} Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11){5061, 506G, 5073} Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11){5061, 506G, 5073}

Pump and Motor Test Bench Course Description{0314, 0374, 5058, 5070} Pump and Motor Test Bench Course Description{0314, 0374, 5058, 5070}
Lesson Plan for Pump and Motor Test Bench Curriculum{0314, 0374, 5058, 5070} Lesson Plan for Pump and Motor Test Bench Curriculum{0314, 0374, 5058, 5070}
Pump and Motor Test Bench Curriculum{0374, 5058, 5070} Pump and Motor Test Bench Curriculum{0374, 5058, 5070}
PUMP GP

Gear Pump (Hoist) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Piston Pump (Steering) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Gear Pump (Hydraulic Fan) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Piston Pumps (Brake, Hoist, Steering, Fan) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Piston Pump (Steering) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

Piston Pump (Steering, Hoist) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Piston Pump (Brake, Hoist, Fan) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

Pump Flow - Test 725 and 730 Articulated Trucks Braking System
Gear Pump (Hoist) - Test 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Piston Pump (Steering, Hoist) - Test and Adjust 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Piston Pump (Brake, Hoist, Fan) - Test and Adjust 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Piston Pump (Brake, Hoist, Fan) - Test and Adjust 725 and 730 Articulated Trucks Braking System

Gear Pump (Hoist) - Remove 725 and 730 Articulated Trucks Machine Systems
Gear Pump (Hoist) - Install 725 and 730 Articulated Trucks Machine Systems
Pump Control Valve (Steering) - Remove and Install 725 and 730 Articulated Trucks Machine Systems
Piston Pump (Brake, Ejector and Fan) - Remove 725 and 730 Articulated Trucks Machine Systems
Piston Pump (Brake, Ejector and Fan) - Install 725 and 730 Articulated Trucks Machine Systems
Piston Pump (Ejector and Steering) - Remove 725 and 730 Articulated Trucks Machine Systems
Piston Pump (Ejector and Steering) - Install 725 and 730 Articulated Trucks Machine Systems
Piston Pump (Ejector and Steering) - Disassembly 725 and 730 Articulated Trucks Machine Systems
Piston Pump (Ejector and Steering) - Assemble 725 and 730 Articulated Trucks Machine Systems
Piston Pump (Brake, Ejector and Fan) - Assemble 725 and 730 Articulated Trucks Machine Systems

New Hoist Pumps Have Improved Bearings That Increase Service Life {5073} 2003/04/21
Correction to Disassembly and Assembly , "Piston Pump (Brake) - Assemble" {4268, 5070} 2004/08/02
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084} 2005/04/25

Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
Nexus Gear Pump Porting{5073} Nexus Gear Pump Porting{5073}
Vane Type Hydraulic Pump Identification Guidelines{5055} Vane Type Hydraulic Pump Identification Guidelines{5055}

PRODUCT SUPPORT PROGRAM FOR REPLACING THE HOIST PUMP GROUP THAT FAIL ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HOIST PUMP GROUP THAT FAIL ON CERTAIN 725 AND 730 ARTICULATED TRUCKS

Vane Type Hydraulic Pumps{5055} Vane Type Hydraulic Pumps{5055}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084} Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073} Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}

Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{0738, 0784, 5070} Bench Test Procedure for Hydraulic Piston Pumps{0738, 0784, 5070}
Bench Test Procedure for Vane Pumps{5055} Bench Test Procedure for Vane Pumps{5055}
PUMP GP-METERING

The Serviceability of Metering Pumps Has Been Limited {4312} 2005/12/19
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312} 2010/01/27
SHAFT GP

Universal Joints and Drive Shafts{3108, 3251, 3253} Universal Joints and Drive Shafts{3108, 3251, 3253}
TANK GP

Hydraulic Tank 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Hydraulic Tank 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

Hydraulic Tank (Steering, Fan) - Remove 725 and 730 Articulated Trucks Machine Systems
Hydraulic Tank (Steering, Fan) - Install 725 and 730 Articulated Trucks Machine Systems
Hydraulic Tank (Steering, Fan) - Remove 725 and 730 Articulated Trucks Machine Systems
Hydraulic Tank (Steering, Fan) - Install 725 and 730 Articulated Trucks Machine Systems

Replacement Instructions for the Oil Level Gauge on the Brake, Steering and Hoist Tank {5056, 7450} 2006/08/21
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738} 2004/03/29
A New Sight Gauge Improves Reliability on the Hydraulic Tank for Articulated Trucks {4332, 5056} 2009/06/08

PRODUCT SUPPORT PROGRAM FOR IMPROVING THE MOUNTING FOR THE HYDRAULIC TANK COVER ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR IMPROVING THE MOUNTING FOR THE HYDRAULIC TANK COVER ON CERTAIN 725 AND 730 ARTICULATED TRUCKS

The Retaining Bolt that Secures the Hydraulic Filter May Strip Threads{5056} The Retaining Bolt that Secures the Hydraulic Filter May Strip Threads{5056}

204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068} 204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
TOOLS

New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738} 2004/05/03
Remove Certain 6D-7726 Hose Assemblies from Inventory {0738} 2005/12/12

Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050} 2010/10/01

Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050} 2010/09/10

Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center{0784} Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center{0784}

9U-5000 Series Hydraulic Test Bench {0599, 0738} 9U-5000 Series Hydraulic Test Bench {0599, 0738}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738} 4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY} TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057} Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057} Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
VALVE GP

Check Valve (Load Sensing) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
VALVE GP-BYPASS
Bypass Valve (Transmission Oil Filter) 725 and 730 Articulated Trucks Power Train
VALVE GP-CHECK

A New Installation Torque for the Check Valves on the Main Control Valve Is Now Used {5051, 5067} 2007/04/09

725, 730 and 730 EJECTOR Articulated Trucks - Oil Might Leak from the Check Valves on the Main Control Valve Due to Low Torque{5051, 5067} 725, 730 and 730 EJECTOR Articulated Trucks - Oil Might Leak from the Check Valves on the Main Control Valve Due to Low Torque{5051, 5067}
VALVE GP-CONTROL

Hoist Control Valve 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Lowering Control Valve 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Hoist Control Valve 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Main Control Valve 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Lowering Control Valve 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

Hoist Control Valve 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Hoist Control Valve 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Main Control Valve 725 and 730 Articulated Trucks Braking System

Pilot Pressure for Hoist Control Valve - Test 725 and 730 Articulated Trucks Braking System
Hoist Control Valve - Test 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Hoist Control Valve - Test 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

Hoist Control Valve - Disassemble 725 and 730 Articulated Trucks Machine Systems
Hoist Control Valve - Assemble 725 and 730 Articulated Trucks Machine Systems
Hoist Control Valve - Remove 725 and 730 Articulated Trucks Machine Systems
Hoist Control Valve - Install 725 and 730 Articulated Trucks Machine Systems
Main Control Valve - Remove 725 and 730 Articulated Trucks Machine Systems
Main Control Valve - Install 725 and 730 Articulated Trucks Machine Systems
Main Control Valve - Disassemble 725 and 730 Articulated Trucks Machine Systems
Main Control Valve - Assemble 725 and 730 Articulated Trucks Machine Systems

Procedure for Lowering the Body with Engine Stopped {5136} 2005/03/21
An Improved Hoist Control Valve Is Available {5051, 5136} 2005/07/04
Changes Have Been Made to the Main Control Valve for Articulated Trucks in Order to Prevent Oil Leaks {5051} 2008/02/11
Place the Correct Number of Seals on the Diverter Valve {5051} 2008/03/10

725, 730 &amp; 730 EJECTOR Articulated Trucks, Loss of Positioning of Valve Spool and Overheating of Hydraulic Oil Eliminated by New Plug in Hoist Control Valve 725, 730 & 730 EJECTOR Articulated Trucks, Loss of Positioning of Valve Spool and Overheating of Hydraulic Oil Eliminated by New Plug in Hoist Control Valve
VALVE GP-COUNTERBALANCE

Counterbalance Valve (Tailgate) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

Counterbalance Valve (Tailgate) - Remove 725 and 730 Articulated Trucks Machine Systems
Counterbalance Valve (Tailgate) - Install 725 and 730 Articulated Trucks Machine Systems
VALVE GP-DIVERTER

A New Diverter Valve Is Used {5066} 2008/09/29
VALVE GP-PRESSURE REDUCING

Pressure Reducing Valve (Hoist Pilot Pressure) - Test and Adjust 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Pressure Reducing Valve (Hoist Pilot Pressure) - Test and Adjust 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
VALVE GP-RELIEF

Relief Valve (Hoist) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Relief Valve (Hoist) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Relief Valve (Hoist Lower) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

Relief Valve (Hoist Raise, Hoist Lower) - Test and Adjust 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Relief Valve (Hoist Lower) - Test and Adjust 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STEERING CYLINDER RELIEF VALVES ON CERTAIN 725, 730 EJECTOR, AND 730 ARTICULATED TRUCKS TO PREVENT FRONT FRAME CRACKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STEERING CYLINDER RELIEF VALVES ON CERTAIN 725, 730 EJECTOR, AND 730 ARTICULATED TRUCKS TO PREVENT FRONT FRAME CRACKS

Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117} Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
VALVE GP-SOLENOID

Solenoid Valve (Fan Drive) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
VALVE GP-HYDRAULIC FAN
Hydraulic Fan Valve 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
LUBRICATION SYSTEM
BREATHER GP

Engine Crankcase Breather - Clean 725 and 730 Articulated Trucks
FILTER GP-ENGINE OIL

Engine Oil Filter Base 3176C and 3196 Engines for Caterpillar Built Machines
Engine Oil Filter Base 3176C and 3196 Engines for Caterpillar Built Machines

Engine Oil Filter Base - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Engine Oil Filter Base - Install 3176C and 3196 Engines For Caterpillar Built Machines
Engine Oil Filter Base - Disassemble 3176C and 3196 Engines For Caterpillar Built Machines
Engine Oil Filter Base - Assemble 3176C and 3196 Engines For Caterpillar Built Machines
Engine Oil Filter and Oil Filter Base - Remove and Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement


New High Efficiency Oil Filters are Now Available {1308} 2004/03/22
New High Efficiency Oil Filters are Now Available {1308} 2006/08/21
GAUGE GP-OIL LEVEL (DIPSTICK)
Improved Engine Oil Plugs Are Used on Certain C11 and C13 Engines {1326} 2013/09/16
OIL CHANGE GP-HIGH SPEED
New Cat QuickEvac<SUP>TM</SUP> High Speed Oil Change Arrangements Are Available {1302, 1372} 2003/03/10
New QuickEvac High Speed Oil Change Arrangements Are Available {1325} 2006/09/25

Installation and Operation of the Cat QuickEvac<SUP>TM</SUP> System{0707, 1325} Installation and Operation of the Cat QuickEvacTM System{0707, 1325}
Supplement to the Operation and Maintenance Manual{0707} Supplement to the Operation and Maintenance Manual{0707}
PUMP GP-ENGINE OIL

Engine Oil Pump 3176C and 3196 Engines for Caterpillar Built Machines

Engine Oil Pump - Remove 3176C and 3196 Engines For Caterpillar Built Machines
Engine Oil Pump - Install 3176C and 3196 Engines For Caterpillar Built Machines
Engine Oil Pump - Disassemble 3176C and 3196 Engines For Caterpillar Built Machines
Engine Oil Pump - Assemble 3176C and 3196 Engines For Caterpillar Built Machines
MACHINE ARRANGEMENT
MACHINE AR

Service Intervals All Products Air Conditioning and Heating R134a for All Caterpillar Machines

General Welding Procedures{0679, 7000} General Welding Procedures{0679, 7000}

Technical Communicators Newsletter For Articulated Trucks Is Available Technical Communicators Newsletter For Articulated Trucks Is Available
MISCELLANEOUS INFORMATION

Heating and Air Conditioning Service Publications All Products Air Conditioning and Heating R134a for All Caterpillar Machines
TOOLS

A New Backing Pad Is Available for the 127 mm (5 inch) Rotary Grinding Disc {0674, 0677, 0685} 2009/10/19

142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122} 142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122} 362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
Torque Multipliers, Models 1U-7293, 6V-7820 and 6V-6080{0599, 0765} Torque Multipliers, Models 1U-7293, 6V-7820 and 6V-6080{0599, 0765}
OPERATOR STATION
AIR CONDITIONER GP

Refrigerant Compressor All Products Air Conditioning and Heating R134a for All Caterpillar Machines
System Capacities for Refrigerant (Articulated Trucks) All Products Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Compressor All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Glossary of Terms All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Expansion Valve System All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Orifice Tube System All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Condenser All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Evaporator Coil All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Compressor Protection System All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Identifying the Air Conditioning System All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Expansion Valve All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Accumulator All Products Air Conditioning and Heating R134a for All Caterpillar Machines
In-line Refrigerant Dryer All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Receiver-Dryer All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Identifying the Heating System All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Temperature Control All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Identifying the Refrigerant All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Condensate Drainage System All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Cab Pressurization and Filtration System All Products Air Conditioning and Heating R134a for All Caterpillar Machines
General Information All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Orifice Tube Assembly All Products Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Recovery All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Manifold Gauge Set (Refrigerant) - Install All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant System - Charge All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant System - Evacuate All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Leakage - Test All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Manifold Gauge Set (Refrigerant) - Remove All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Electronic Heat Control - Test All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Compressor - Test All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning Performance - Test All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Oil - Test All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant System - Flush All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Machine Preparation for Testing and Adjusting All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Compressor Protection System - Test All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Heater Performance - Test All Products Air Conditioning and Heating R134a for All Caterpillar Machines

Required Tools All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Machine Preparation for Troubleshooting All Products Air Conditioning and Heating R134a for All Caterpillar Machines
General Troubleshooting Information All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Visual Inspection (Troubleshooting) All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Heating System Troubleshooting All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Troubleshooting Condensate Drainage System All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning System Troubleshooting All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Troubleshooting Heating and Air Conditioning Control System All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Automatic Temperature Control Panel Troubleshooting - 584 and 584HD Forwarders All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Automatic Temperature Control System (ECM Controlled) Troubleshooting All Products Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Expansion Valve - Remove and Install All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Compressor - Remove and Install All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Accumulator - Remove and Install All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Compressor - Remove and Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

In-Line Refrigerant Dryer - Remove and Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Refrigerant Accumulator - Remove and Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Refrigerant Condenser - Remove and Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Air Conditioner Lines - Remove and Install All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Machine Preparation for Disassembly and Assembly All Products Air Conditioning and Heating R134a for All Caterpillar Machines
In-Line Refrigerant Dryer - Remove and Install All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Receiver-Dryer - Remove and Install All Products Air Conditioning and Heating R134a for All Caterpillar Machines
General Information All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Orifice Tube Assembly - Remove and Install All Products Air Conditioning and Heating R134a for All Caterpillar Machines

The In-line Refrigerant Dryer Is Improved And A New Dryer For Service Replacement Is Available {7320, 7322} 2000/02/07
New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342} 2003/05/05
Preparation of Air Conditioner Units for Seasonal Use {7320} 2002/05/27
Special Instruction, REHS1715, "Procedure to Replace the Control Assembly and Water Valve Assembly in the Air Conditioner Group" Is Available {7320} 2004/04/12
Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320} 2004/05/17
Refrigerant Identification Instrument is Available {1809} 2006/08/14
An Enhanced Diagnostic Procedure is Now Available for the Air Conditioner Dryer {7322} 2008/04/21
Correction to Troubleshooting , "Required Tools" {1808} 2010/10/06
An Air Conditioner Kit for Use When Servicing the Air Conditioning System Is Now Available {7320, 7320} 2012/08/24

Refrigerant Dryer - Replace 725 and 730 Articulated Trucks

Procedure to Replace the Control Assembly and Water Valve Assembly in the Air Conditioner Group{7320} Procedure to Replace the Control Assembly and Water Valve Assembly in the Air Conditioner Group{7320}
Refrigerant Compressor Functional Test for All Caterpillar Machines{1802} Refrigerant Compressor Functional Test for All Caterpillar Machines{1802}
Functional Test for the Refrigerant Dryer{7322} Functional Test for the Refrigerant Dryer{7322}
Procedure for Checking the Electrical Circuit that is for the Actuator and the Water Valve{1812, 7304, 7320} Procedure for Checking the Electrical Circuit that is for the Actuator and the Water Valve{1812, 7304, 7320}

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 151-5261 ACCUMULATOR TO IMPROVE AIR CONDITIONER PERFORMANCE ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 151-5261 ACCUMULATOR TO IMPROVE AIR CONDITIONER PERFORMANCE ON CERTAIN 725 AND 730 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR INSPECTING THE AIR CONDITIONER TEMPERATURE PROBE ON CERTAIN 725, 730, 735, 740 EJECTOR, AND 740 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR INSPECTING THE AIR CONDITIONER TEMPERATURE PROBE ON CERTAIN 725, 730, 735, 740 EJECTOR, AND 740 ARTICULATED TRUCKS

THE BLOWER RESISTER MAY BE WIRED INCORRECTLY THE BLOWER RESISTER MAY BE WIRED INCORRECTLY
CAB GP

Cab Door - Remove and Install 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab
Cab - Remove 725 and 730 Articulated Trucks Machine Systems
Cab - Install 725 and 730 Articulated Trucks Machine Systems

Material for Sound Suppression in the Cab is Available {7301, 7325, 7329, 7330} 2001/01/22
Use the Correct Torque for the Screws When You Replace a Front Cab Window {7301, 7310} 2002/06/03
A New Cab Is Now Installed {7301} 2004/02/02
Cab Certification {7323, 7325} 2005/03/28
Ordering a Replacement Operator Protective Structure (OPS) Certification Film {7323, 7325, 7405, 7557} 2007/02/12
Direct Shipping Process and New Packaging for Replacement Glass {7301, 7308, 7310, 7325} 2007/03/26
Use of Dry Lubricant is Recommended {0645, 7301} 2007/07/09
Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557} 2009/07/27
A Procedure for Replacing Bonded Windows on All Caterpillar Products Is Now Available {7310} 2009/11/02
Changes to Cab Lifting {7301} 2011/05/20

Operator Controls 725 and 730 Articulated Trucks
Operator Controls 725 and 730 Articulated Trucks

Replacing Bonded Windows{7310} Replacing Bonded Windows{7310}
Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500} Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500}

Air Filter Fouling on Panel Air Filter Fouling on Panel
CIRCULATION GP-AIR

Cab Air Filter - Clean/Replace 725 and 730 Articulated Trucks
CONTROL GP

New Spring Kit for Articulated Truck Hoist Lever Now Available {5063} 2006/10/02

Procedure for Installation of New Spring Kit{3065, 5063} Procedure for Installation of New Spring Kit{3065, 5063}

PRODUCT SUPPORT PROGRAM FOR REPLACING HOIST OR EJECTOR AND SHIFT LEVER DETENT SPRINGS ON CERTAIN 725, 730, 735, AND 740 ARTICULATED TRUCKS AND 773F, 775F, AND 777F OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING HOIST OR EJECTOR AND SHIFT LEVER DETENT SPRINGS ON CERTAIN 725, 730, 735, AND 740 ARTICULATED TRUCKS AND 773F, 775F, AND 777F OFF-HIGHWAY TRUCKS
CONTROL GP-STEERING

Steering Column - Remove 725 and 730 Articulated Trucks Machine Systems
Steering Column - Disassemble 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab
Steering Column - Assemble 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab
Steering Column - Install 725 and 730 Articulated Trucks Machine Systems

New Control for the Steering Is Now Used {4338, 4343} 2009/01/26
An Improved Gas Strut Kit Is Now Used for the Cylinder of the Steering Column on Certain Articulated Truck Machines {4338} 2010/05/10

700 Family Articulated Trucks - Installation of Shim Improves Ease of Action of Steering{4343} 700 Family Articulated Trucks - Installation of Shim Improves Ease of Action of Steering{4343}
CONTROL GP-WASHER & WIPER

Window Wiper and Washer Control - Remove 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab
Window Wiper and Washer Control - Install 725 and 730 Articulated Trucks Machine Systems
DOOR GP
Cab Door - Remove and Install 725 and 730 Articulated Trucks Machine Systems
Door Handle and Latch - Remove and Install 725 and 730 Articulated Trucks Machine Systems

New Window Latch for Off-Highway Trucks and Articulated Trucks {7308, 7310} 2009/06/01

Alternate Exit 725 and 730 Articulated Trucks
GUARD GP

Window Guard - Remove and Install 725 and 730 Articulated Trucks Machine Systems

Exhaust Guard Assembly can be Added in order to Improve Operator Comfort {7315} 2001/10/22
HEATER GP

Heater Assembly - Remove 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab
Heater Assembly - Install 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab
Heater Assembly - Disassemble 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab
Heater Assembly - Assemble 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab
Heater Assembly - Remove 725 and 730 Articulated Trucks Machine Systems
Heater Assembly - Install 725 and 730 Articulated Trucks Machine Systems
Heater Assembly - Disassemble 725 and 730 Articulated Trucks Machine Systems
Heater Assembly - Assemble 725 and 730 Articulated Trucks Machine Systems

A New Hose Clamp for the Heater Lines Is Available {1812, 7304} 2005/06/20
Improved Heater Hose with New Routing and a Heat Shield Improves the Service Life of the Heater Hose {1812, 7304} 2006/03/27
INDICATOR GP
New Gauges Available {7450} 2010/07/08
MIRROR GP
Correct Installation of Mirrors {7319} 2002/03/11
Improved Mounting Arrangement for Mirrors Reduces Loosening Due to Vibration {7319} 2001/09/24
New Mirror Has Improved Durability and a New Support that Reduces Vibration {7319} 2002/11/25
Improved Rear View Mirrors Are Used {7319} 2006/10/23
New Mirrors Are Used on Articulated Trucks {7319} 2008/03/31
New Mirrors Are Now Being Used on Articulated Trucks {7319} 2010/07/14
MODULE GP
Certain Warning Indicators Will Illuminate When You Turn the Engine Start Switch Off {7431, 7490} 2004/09/20
MONITOR GP

Caterpillar Monitoring System 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Monitoring System 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Introduction 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System
Features 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System
Location of Electrical Components 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System
Data Link 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System
Warning Operation 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System
Diagnostic Operation 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System
Component Description 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System

Connector Contact Description 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System
Self Test 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System
Module - Replace 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System
Ground Speed Units - Set 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks and 725, 730, 735 and 740 OEM Articulated Trucks Machine Monitor System

Electronic Display Module - If Equipped 3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
MID 027 - CID 0562 - FMI 02 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0562 - FMI 09 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 0562 - FMI 12 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System

Latest Messenger Display Software Supports Different Languages {7490, 7610, 7620} 2010/09/30
Improved VisionLink<SUP>TM</SUP> Software Is Now Available for Certain Caterpillar Machines {7601} 2012/09/11
Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606} 2013/04/04

Monitoring System 725 and 730 Articulated Trucks
Monitoring System 725 and 730 Articulated Trucks

WAVS Installation Guide for Generic Applications{7347, 7348} WAVS Installation Guide for Generic Applications{7347, 7348}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications){108F, 1091, 7490} Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications){108F, 1091, 7490}
WAVS Light Duty Installation Guide for Certain Cat<SUP>&reg;</SUP> Products{7347, 7348} WAVS Light Duty Installation Guide for Certain Cat® Products{7347, 7348}

PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW DISPLAY SOFTWARE ON CERTAIN 725, 725 T3, 730, 730 T3, 730 EJ, 735, 735 T3, 740 T3, AND 740 EJ ARTICULATED TRUCKS EQUIPPED WITH A 262-5851 CYCLE COUNTER/OPERATOR MONITOR PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW DISPLAY SOFTWARE ON CERTAIN 725, 725 T3, 730, 730 T3, 730 EJ, 735, 735 T3, 740 T3, AND 740 EJ ARTICULATED TRUCKS EQUIPPED WITH A 262-5851 CYCLE COUNTER/OPERATOR MONITOR
PANEL GP

Speedometer/Tachometer Module 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Display Components 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System
Quad Gauge Module 725, 730, 735, 740 and 740 Ejector Articulated Trucks Caterpillar Monitoring System

Switch (Parking Brake) - Remove 725 and 730 Articulated Trucks Machine Systems
Switch (Parking Brake) - Install 725 and 730 Articulated Trucks Machine Systems
Instrument Panel - Remove 725 and 730 Articulated Trucks Machine Systems
Instrument Panel - Install 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab
Instrument Panel - Remove 725 and 730 Articulated Trucks Machine Systems
Instrument Panel - Install 725 and 730 Articulated Trucks Machine Systems

700 Series Articulated Trucks, Configuration of Dash Information Not Supported by Electronic Technician 700 Series Articulated Trucks, Configuration of Dash Information Not Supported by Electronic Technician
PEDAL GP

Accelerator - Remove and Install 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab
Accelerator - Remove and Install 725 and 730 Articulated Trucks Machine Systems
RADIO GP

New Processes Improve Registration of Product Link {7338, 7606} 2008/04/14
A New Antenna For The Product Link Is Available {7010, 733T} 2008/06/09

Change the Frequency Band of Entertainment Radios{7338} Change the Frequency Band of Entertainment Radios{7338}

Miswiring Issues with Installation of the Product Link 121 and Product Link 321{7606} Miswiring Issues with Installation of the Product Link 121 and Product Link 321{7606}
Product Link Registration Problems{733T, 7606} Product Link Registration Problems{733T, 7606}

317-7492 Wireless Radio{7338} 317-7492 Wireless Radio{7338}
ROPS/FOPS GP

An Improved Method for Retaining the Mounting Pins for the Cab Is Introduced {7266} 2006/06/26

Rollover Protective Structure (ROPS) - Inspect 725 and 730 Articulated Trucks

Inspection, Maintenance, and Repair of Operator Protective Structures (OPS) and Attachment Installation Guidelines for All Earthmoving Machinery, If Equipped{7323, 7325} Inspection, Maintenance, and Repair of Operator Protective Structures (OPS) and Attachment Installation Guidelines for All Earthmoving Machinery, If Equipped{7323, 7325}

700 Family Articulated Trucks - Correct Installation of Keeper Pins for Securing the Mounting Pins for the Cab{7266} 700 Family Articulated Trucks - Correct Installation of Keeper Pins for Securing the Mounting Pins for the Cab{7266}
Maintaining the Protective Structure (ROPS/FOPS) Certification when Making Modifications To (ROPS/FOPS){7323, 7325, 7715} Maintaining the Protective Structure (ROPS/FOPS) Certification when Making Modifications To (ROPS/FOPS){7323, 7325, 7715}
SEAT GP

Contour Seat Air Suspension with Air Compressor Contour Series Seat
Contour Seat Air Suspension with Air System Contour Series Seat
Contour Seat Controls Contour Series Seat
Mechanical Suspension Contour Series Seat
Comfort Seat Air Suspension with Air Compressor Comfort Series Seat For Caterpillar Machines
Comfort Seat with Lumbar, Side Controls, and Slide Swivel Comfort Series Seat For Caterpillar Machines
Serial Number Effectivity Comfort Series Seat For Caterpillar Machines
Comfort Seat Air Suspension with System Air Comfort Series Seat For Caterpillar Machines
Comfort Seat Controls Comfort Series Seat For Caterpillar Machines
Optimized Seat Air Suspension with Air Compressor Comfort Series Seat For Caterpillar Machines
Optimized Seat Controls Comfort Series Seat For Caterpillar Machines
Optimized Seat with Lumbar, Side Controls, and Slide Swivel Comfort Series Seat For Caterpillar Machines
General Information Comfort Series Seat For Caterpillar Machines
Component Descriptions Comfort Series Seat For Caterpillar Machines
Troubleshooting Comfort Series Seat For Caterpillar Machines

Troubleshooting Chart Contour Series Seat

Contour Seat With Front Controls - Disassemble Contour Series Seat
Contour Seat With Front Controls - Assemble Contour Series Seat
Contour Seat With Lumbar Option and Side Controls - Disassemble Contour Series Seat
Contour Seat With Lumbar Option and Side Controls - Assemble Contour Series Seat
Swivel Seat - Disassemble Contour Series Seat
Swivel Seat - Assemble Contour Series Seat
Air Suspension With Toggle Switch Height Adjustment - Disassemble Contour Series Seat
Air Suspension With Toggle Switch Height Adjustment - Assemble Contour Series Seat
Air Suspension With System Air - Disassemble Contour Series Seat
Air Suspension With System Air - Assemble Contour Series Seat
Mechanical Suspension With Fixed Damper - Disassemble Contour Series Seat
Mechanical Suspension With Fixed Damper - Assemble Contour Series Seat
Mechanical Suspension With Variable Damper - Disassemble Contour Series Seat
Mechanical Suspension With Variable Damper - Assemble Contour Series Seat
Comfort Seat with Lumbar Option and Side Controls - Disassemble Comfort Series Seat For Caterpillar Machines
Comfort Seat with Lumbar Option and Side Controls - Assemble Comfort Series Seat For Caterpillar Machines
Seat - Remove and Install 725 and 730 Articulated Trucks Machine Systems
Air Suspension with Air Valve Knob Height Adjustment - Disassemble Contour Series Seat
Air Suspension With Air Valve Knob Height Adjustment - Assemble Contour Series Seat
Comfort Seat Air Suspension with Air Compressor - Assemble Comfort Series Seat For Caterpillar Machines
Comfort Seat Air Suspension with Air Compressor - Disassemble Comfort Series Seat For Caterpillar Machines
Comfort Seat with Front Controls - Disassemble Comfort Series Seat For Caterpillar Machines
Comfort Seat with Front Controls - Assemble Comfort Series Seat For Caterpillar Machines
Seat - Remove and Install 725 and 730 Articulated Trucks Machine Systems
Optimized Seat with Front Controls - Disassemble and Assemble Comfort Series Seat For Caterpillar Machines

The Seat Can Be Adjusted In Order to Eliminate Side Movement {7312, 7321} 2002/06/03
New Clip Improves Seat Performance {7312} 2002/09/30
Longer Seat Belts Can Be Installed If Necessary {7327} 2005/09/19
An Improved Suspension Seat and a Companion Seat Is Available {7324} 2006/03/13
An Improved Damper for the Suspension Seat Is Used {7312, 7324} 2006/10/02
An Improved Spring Assembly Is Available For the Seat Base Assembly {7312, 7321} 2007/10/01
An Improved Damper for the Suspension Seat Is Used {7312, 7324} 2011/04/27

Seat Belt - Replace 725 and 730 Articulated Trucks
Seat Belt - Inspect 725 and 730 Articulated Trucks
Seat Belt 725 and 730 Articulated Trucks
Seat 725 and 730 Articulated Trucks
Seat 725 and 730 Articulated Trucks

Installation Instruction for 212-7779 Shock Absorber Kit , 192-7848 Shock Absorber Kit , and 213-5170 Indicator Kit on Toggle Link Vertical (TLV) Seat Suspensions {7324} Installation Instruction for 212-7779 Shock Absorber Kit , 192-7848 Shock Absorber Kit , and 213-5170 Indicator Kit on Toggle Link Vertical (TLV) Seat Suspensions {7324}

THE SEAT ARMRESTS NEED TO BE REPLACED ON CERTAIN D250E II, D300E II, D350E II, D400E II, 730, AND 725 ARTICULATED TRUCKS THE SEAT ARMRESTS NEED TO BE REPLACED ON CERTAIN D250E II, D300E II, D350E II, D400E II, 730, AND 725 ARTICULATED TRUCKS
STEP GP

An Increased Capacity Shock is Now Available for Cat Comfort Seats That Are Equipped With Toggle Link Vertical Suspensions {7324} 2009/09/21
VISOR GP-CAB
A New Sun Visor Is Now Available {7301} 2004/04/05
WASHER GP-WINDOW
Washer Pump Assemblies Must Be Primed Properly {7306} 2002/12/23
New Window Washer Tank is Available. {7306} 2004/11/29

Window Washer Reservoir - Fill 725 and 730 Articulated Trucks
WINDOW GP

Window Seals are Now Serviced {7310} 2003/05/12
Service Part Is Now Available for the Window Group {7310} 2004/05/10
Procedure to Replace the Right Hand Cab Window {7310} 2007/01/29

Windows 725 and 730 Articulated Trucks
Windows - Clean 725 and 730 Articulated Trucks
WIPER GP-WINDOW

Window Wiper and Wiper Motor (Front) - Remove and Install 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab
Window Wiper and Wiper Motor (Rear) - Remove and Install 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab
Window Wiper and Wiper Motor (Front) - Remove and Install 725 and 730 Articulated Trucks Machine Systems
Window Wiper and Wiper Motor (Rear) - Remove and Install 725 and 730 Articulated Trucks Machine Systems

An Improved Wiper Motor Is Used On Articulated Trucks {7305} 2008/01/14
An Improved Wiper Motor is Now Available {7305} 2008/11/10

Window Wiper - Inspect/Replace 725 and 730 Articulated Trucks
CONTROL GP-HOIST

Transmission and Hoist Control - Remove 725 and 730 Articulated Trucks Machine Systems
Transmission and Hoist Control - Install 725 and 730 Articulated Trucks Machine Systems

A New Plug in the Hoist Control Valve Eliminates Overheating of the Hydraulic Oil {5136} 2006/01/23
A New Spring Kit is Now Available {3065, 5063} 2007/07/09

Hoist Control 725 and 730 Articulated Trucks
CONTROL GP-TRANSMISSION

Transmission Control (Shift Lever) - Calibrate 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System

Transmission Control 725 and 730 Articulated Trucks
POWER TRAIN
AXLE GP

Center Axle 725 and 730 Articulated Trucks Power Train
Front Axle 725 and 730 Articulated Trucks Power Train
Rear Axle 725 and 730 Articulated Trucks Power Train
Rear Axle 725 and 730 Articulated Trucks Power Train

Brake Line Pressure for Front Axle - Test 725 and 730 Articulated Trucks Braking System
Brake Line Pressure for Center and Rear Axle - Test 725 and 730 Articulated Trucks Braking System
Brake Line Pressure for Front Axle - Test 725 and 730 Articulated Trucks Braking System

Axle Shaft - Remove 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Axle Shaft - Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Rear Axle - Remove 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Rear Axle - Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Center Axle - Remove 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Center Axle - Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Front Axle - Remove 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Front Axle - Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train

A New Locking Arrangement Improves the Retention of the Bearing for the Output Yoke on the Center Axle {3278} 2001/10/15
Disassembly and Assembly of Rear Output Yoke on the Center Axle {3278} 2003/12/01
Clarification of the Markings on the Pinion Gear {3256, 3258} 2004/07/26
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050} 2008/12/29
New Differentials Are Used {3256, 3278} 2006/09/04
A New Bolt Torque Is Now Used on the Final Drives {3278} 2007/03/19
A New Lip Seal Is Now Used {3256, 3258, 3278, 7555} 2007/09/10
Improved Differential Pinion Yoke Assemblies for the Articulated Trucks {3278} 2007/12/03
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561} 2010/02/25
A New Center Axle Is Used {3278} 2011/05/04

Axle Breathers - Clean/Replace 725 and 730 Articulated Trucks

Inspection of the Duo-cone Seal Gp{4050, 4051, 7561} Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}

High Iron in Axle SOS Samples High Iron in Axle SOS Samples

Specifications for Inspection of Driveline Fasteners{3030, 3101, 3159, 3253, 3258, 3278, 4050} Specifications for Inspection of Driveline Fasteners{3030, 3101, 3159, 3253, 3258, 3278, 4050}
Thermal Spray Procedures for ADT Spindle and Wheel Bearing Bores{0679, 4205, 4215} Thermal Spray Procedures for ADT Spindle and Wheel Bearing Bores{0679, 4205, 4215}

Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines{0680, 0768, 3258, 3260, 4050} Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines{0680, 0768, 3258, 3260, 4050}
BRAKE GP

Service Kits Are Available for the Parking Brake {4267} 2006/02/20
BREATHER GP

Transmission and Transfer Gear Breather - Clean/Replace 725 and 730 Articulated Trucks
CLUTCH GP

Identification of Non-Metallic Discs that are Used in Power Shift Transmissions{3030, 3155} Identification of Non-Metallic Discs that are Used in Power Shift Transmissions{3030, 3155}
Repair of Reaction Dowel Holes in Transmission Clutch Housings{3030, 3155, 3169} Repair of Reaction Dowel Holes in Transmission Clutch Housings{3030, 3155, 3169}
CONTROL GP-DIFFERENTIAL LOCK

Differential Lock Switch - Remove and Install 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab

Differential Lock Control {3264} 2002/11/25

Differential Lock Control 725 and 730 Articulated Trucks
CONTROL GP-RETARDER

Retarder Hydraulic Control Valve 725 and 730 Articulated Trucks Power Train

Retarder Control - Remove 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab
Retarder Control - Install 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Cab

Retarder Control 725 and 730 Articulated Trucks
CONTROL GP-XMSN OIL SYSTEM

Procedure for Cleaning the Power Train {3065, 3139} 2008/12/08
CONTROL GP-TRANSMISSION HYD

Relief Valve (Transmission Hydraulic Control) 725 and 730 Articulated Trucks Power Train
Transmission Hydraulic Control 725 and 730 Articulated Trucks Power Train
Transmission Hydraulic Control 725 and 730 Articulated Trucks Power Train

Transmission Hydraulic Control 725 and 730 Articulated Trucks Power Train
Relief Valve (Transmission Hydraulic Control) 725 and 730 Articulated Trucks Power Train

MID 027 - CID 0707 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0707 - FMI 05 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0707 - FMI 06 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0708 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0708 - FMI 05 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0708 - FMI 06 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT

Relief Valve (Transmission Hydraulic Control) - Remove and Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train

New Modulating Valve for the Transmission {3139, 3167} 2003/06/09
An Improved Modulating Valve Is Now Used on Certain Cat Products {3139} 2011/08/18
An Improved O-Ring Seal is Now Used in the Transmission Clutch Solenoid Modulating Valves {3073, 3167} 2009/03/09

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TORQUE CONVERTER SLEEVE BEARINGS AND RELATED PARTS ON CERTAIN 725, AND 730 ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TORQUE CONVERTER SLEEVE BEARINGS AND RELATED PARTS ON CERTAIN 725, AND 730 ARTICULATED TRUCKS

Bench Test Procedure For A 725, 725C, and 730 Articulated Truck Transmission{3030, 3073, 3139} Bench Test Procedure For A 725, 725C, and 730 Articulated Truck Transmission{3030, 3073, 3139}
COUPLING GP

Addition to Specifications , "143-4702 Drive Coupling Gp " {3252} 2001/11/19
New Assembly of the Drive Plate to the Torque Converter Improves Reliability {3279} 2006/06/26
DIFFERENTIAL & BEVEL GEAR GP

Differential and Bevel Gear (Center) 725 and 730 Articulated Trucks Power Train
Differential and Bevel Gear (Front and Rear) 725 and 730 Articulated Trucks Power Train

Interaxle Differential 725 and 730 Articulated Trucks Power Train
Differential (Front and Rear Axle) 725 and 730 Articulated Trucks Power Train
Differential (Center Axle) 725 and 730 Articulated Trucks Power Train

Differential Troubleshooting 725 and 730 Articulated Trucks Power Train
Interaxle Differential Troubleshooting 725 and 730 Articulated Trucks Power Train
Interaxle Differential - Test 725 and 730 Articulated Trucks Power Train
Differential - Test 725 and 730 Articulated Trucks Power Train

Differential and Bevel Gear (Front and Rear) - Disassemble 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Differential and Bevel Gear (Front and Rear) - Assemble 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Differential and Bevel Gear (Front and Rear) - Remove 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Differential and Bevel Gear (Front and Rear) - Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Differential and Bevel Gear (Center) - Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Differential and Bevel Gear (Center) - Disassemble 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Differential and Bevel Gear (Center) - Assemble 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Differential and Bevel Gear (Center) - Remove 725, 730 and 730 EJECTOR Articulated Trucks Power Train

Correction to Disassembly and Assembly , "Differential and Bevel Gear (Center) - Assemble" {3256, 3258} 2002/04/29
Correction to Disassembly and Assembly , "Differential and Bevel Gear (Front and Rear) - Assemble" {3256, 3258} 2002/09/30
Correction to Disassembly and Assembly , "Differential and Bevel Gear (Center) - Assemble" {3256, 3258} 2002/09/30
New Sleeve Bearings and New Spiders for Differentials Are Now Available {3258} 2004/05/10
A New Lip Seal for the Differential Pinion Is Available {3258} 2004/10/18
Correct Installation of the New 250-7858 Locknut and 250-7859 Locknut {3256, 3258} 2004/11/29
Correction to Disassembly and Assembly , "Differential and Bevel Gear (Front and Rear) - Assemble" {3256, 3258} 2006/02/06
Correction to Disassembly and Assembly , "Differential and Bevel Gear (Center) - Assemble" {3256, 3258} 2006/01/30
Change to Stackup of the Discs in the Differential and Bevel Gear {3256, 3258} 2006/02/13
Dowels for Servicing the Hub in the Differential Lock Are Available {3256, 3258} 2006/03/20
New Bevel Gear Bolts and Washers Can Improve Reliability in Articulated Trucks {3256, 3258} 2006/08/21
Rebuilt Differential and Bevel Gears Require A Break-In Period {3256, 3258} 2006/09/11
New Locknuts Are Now Used in the Differential {3256, 3258} 2007/02/26
New Hub Assemblies Are Now Used in the Differentials {3258, 3284} 2007/02/26
Improved Bearing Assembly for the Center Axle on Articulated Trucks {3256, 3258} 2008/01/28
Improved Differential Carrier for the Center Axle of 725 and 730 Articulated Trucks {3258, 3284} 2008/11/24
An Improved Procedure to Grease the Bearing Assembly for the Center Axle on Articulated Trucks {3256, 3258} 2009/06/08

Differential and Final Drive Oil - Change 725 and 730 Articulated Trucks
Differential and Final Drive Oil Sample - Obtain 725 and 730 Articulated Trucks
Differential and Final Drive Oil Level - Check 725 and 730 Articulated Trucks

Pinning the Dowels on the Hub for Locking the Differential{3256, 3258} Pinning the Dowels on the Hub for Locking the Differential{3256, 3258}

PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PINION LOCKNUT ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PINION LOCKNUT ON CERTAIN 725 AND 730 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE DIFFERENTIAL GEAR GROUP ON CERTAIN 725 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REWORKING THE DIFFERENTIAL GEAR GROUP ON CERTAIN 725 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REWORKING FAILED CENTER AXLE DIFFERENTIALS ON CERTAIN 725, 730, AND 730 EJECTOR ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REWORKING FAILED CENTER AXLE DIFFERENTIALS ON CERTAIN 725, 730, AND 730 EJECTOR ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DIFFERENTIAL LOCK HUB ON CERTAIN 725, 730, 735, 740 EJECTOR, AND 740 ARTICULATED TRUCKS WHEN HIGH CONTENT IRON SHOWS UP IN THE AXLE SCHEDULED OIL SAMPLES PRODUCT SUPPORT PROGRAM FOR REPLACING THE DIFFERENTIAL LOCK HUB ON CERTAIN 725, 730, 735, 740 EJECTOR, AND 740 ARTICULATED TRUCKS WHEN HIGH CONTENT IRON SHOWS UP IN THE AXLE SCHEDULED OIL SAMPLES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DIFFERENTIAL LOCK HUB AND PINNING THE DOWELS ON CERTAIN 725, 730, 735, 740 EJECTOR, AND 740 ARTICULATED TRUCKS WHEN HIGH CONTENT IRON SHOWS UP IN THE AXLE SCHEDULED OIL SAMPLES PRODUCT SUPPORT PROGRAM FOR REPLACING THE DIFFERENTIAL LOCK HUB AND PINNING THE DOWELS ON CERTAIN 725, 730, 735, 740 EJECTOR, AND 740 ARTICULATED TRUCKS WHEN HIGH CONTENT IRON SHOWS UP IN THE AXLE SCHEDULED OIL SAMPLES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE DIFFERENTIAL GEAR GROUP ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REWORKING THE DIFFERENTIAL GEAR GROUP ON CERTAIN 725 AND 730 ARTICULATED TRUCKS

700 Series Articulated Trucks, Differential and Bevel Gear, Service Part Inventory May Have Dowels Installed Incorrectly 700 Series Articulated Trucks, Differential and Bevel Gear, Service Part Inventory May Have Dowels Installed Incorrectly
700 Series Articulated Trucks, Disc Stack-Up Change in the Differential and Bevel Gear Gps, SIS Information has Changed 700 Series Articulated Trucks, Disc Stack-Up Change in the Differential and Bevel Gear Gps, SIS Information has Changed
725, 730, 730 EJECTOR &amp; 735 Articulated Trucks, Pinion Locknut for Field Service 725, 730, 730 EJECTOR & 735 Articulated Trucks, Pinion Locknut for Field Service

226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561} 226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}

Salvage of Articulated Truck Center Differential Carrier by Installation of Service Repair Cage{3258, 3284} Salvage of Articulated Truck Center Differential Carrier by Installation of Service Repair Cage{3258, 3284}
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers{3258, 3284} Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers{3258, 3284}
Reusability of Drive Train Gears{3002, 3159, 3256, 4055} Reusability of Drive Train Gears{3002, 3159, 3256, 4055}
Procedure to Machine Damaged Transmission and Differential Yokes{3030, 3253, 3258} Procedure to Machine Damaged Transmission and Differential Yokes{3030, 3253, 3258}
Thermal Spray Procedures for Wheel Loader, Wheel Dozer, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper - Differential Carrier Assembly{0679, 3284} Thermal Spray Procedures for Wheel Loader, Wheel Dozer, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper - Differential Carrier Assembly{0679, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal{0679, 3258, 3284} Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal{0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End{0679, 3258, 3284} Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End{0679, 3258, 3284}
DIFFERENTIAL GP

Differential (Drive Axle) 725 and 730 Articulated Trucks Power Train

Correction to Systems Operation, Testing and Adjusting , "Power Train Pressures" {3159, 3258} 2001/06/18
Correction to Specifications , "Differential (Drive Axle)" {3258} 2004/01/19

PRODUCT SUPPORT PROGRAM FOR INSTALLING LOOSE FIT DIFFERENTIAL SLEEVE BEARINGS IN CERTAIN 725, 730, AND 735 ARTICULATED TRUCKS WHEN UPWARD TRENDING COPPER CONTENT SHOWS UP IN DIFFERENTIAL SCHEDULED OIL SAMPLES PRODUCT SUPPORT PROGRAM FOR INSTALLING LOOSE FIT DIFFERENTIAL SLEEVE BEARINGS IN CERTAIN 725, 730, AND 735 ARTICULATED TRUCKS WHEN UPWARD TRENDING COPPER CONTENT SHOWS UP IN DIFFERENTIAL SCHEDULED OIL SAMPLES

226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561} 226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}

Thermal Spray Procedures for Differential Case - Housing Face &amp; Pinion Thrust Face{3283} Thermal Spray Procedures for Differential Case - Housing Face & Pinion Thrust Face{3283}
DRIVE GP

Pump Drive 725 and 730 Articulated Trucks Power Train

Pump Drive - Assemble 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Pump Drive - Disassemble 725, 730 and 730 EJECTOR Articulated Trucks Power Train

Correction to Disassembly and Assembly , "Pump Drive - Assemble" {3108} 2003/06/02
A New Oil Filter Cover and Seal is Available for Articulated Trucks {3067, 3108} 2008/12/01

PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE TRANSMISSION FILTER BY-PASS VALVE ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE TRANSMISSION FILTER BY-PASS VALVE ON CERTAIN 725 AND 730 ARTICULATED TRUCKS

725, 730, 735, Transmission Drive Group Pump Seal, Leaks Oil/Lube{3108} 725, 730, 735, Transmission Drive Group Pump Seal, Leaks Oil/Lube{3108}
DRUM GP

345-1236 Lifting Bracket{0599, 0629, 0632, 6605} 345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
FILTER GP

Oil Filter (Output Transfer Gears) 725 and 730 Articulated Trucks Power Train

Oil Filter (Transmission) 725 and 730 Articulated Trucks Power Train

The Maintenance Interval for Cleaning the Magnetic Screen for the Transfer Gear has Changed {3067} 2001/11/26
An Improved Oil Filter Element for the Output Transfer Gear Is Available {3004, 3067} 2004/11/15
A High Capacity Oil Filter Is Available for the Transmission {3067} 2006/01/16
Improved Filter Cover for the Transmission Filter {3067} 2006/01/30
A High Capacity Oil Filter for the Output Transfer Gear Is Used {3004, 3067, 3154} 2006/11/27
Understanding Transmission Filter Plugging Events {3004, 3067} 2007/04/02

Return Plugged OTG Filters from 725, 730, 735, 740, and 740 Ejector Machines Return Plugged OTG Filters from 725, 730, 735, 740, and 740 Ejector Machines
CHECK FOR THE CORRECT OIL SAMPLING AND PRESSURE TEST POINT NIPPLE FOR THE OTG CHECK FOR THE CORRECT OIL SAMPLING AND PRESSURE TEST POINT NIPPLE FOR THE OTG
GEAR GP

Output Transfer Gear Group 725 and 730 Articulated Trucks Power Train

Transfer Gears 725 and 730 Articulated Trucks Power Train

Output Transfer Gears - Disassemble 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Output Transfer Gears - Assemble 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Output Transfer Gears - Remove 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Output Transfer Gears - Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train

Correction to Specifications, RENR3483, "725 and 730 Articulated Trucks Power Train" {3159} 2001/11/12
New Seal for the Front Output Yoke {3159} 2003/10/06
Steel Ecology Drains Are Now Used {3030, 3064, 3075, 3101, 3105} 2005/12/26
New Output Transfer Gears V-Ring and Retainer Are Now Being used on the 725/730 Articulated Truck {1164, 3159} 2013/06/11

Transfer Gear Oil - Change 725 and 730 Articulated Trucks
Transfer Gear Oil Level - Check 725 and 730 Articulated Trucks
Transfer Gear Oil Filter - Replace 725 and 730 Articulated Trucks
Transfer Gear Magnetic Screen - Clean 725 and 730 Articulated Trucks
Transfer Gear Oil Sample - Obtain 725 and 730 Articulated Trucks

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OUTPUT TRANSFER GEAR MOUNTING BOLTS ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OUTPUT TRANSFER GEAR MOUNTING BOLTS ON CERTAIN 725 AND 730 ARTICULATED TRUCKS

the Indicator fo rthe Power Train Oil Filters is Incorrectly Described in the OMM the Indicator fo rthe Power Train Oil Filters is Incorrectly Described in the OMM
LINES GP-DIFFERENTIAL LOCK

Additional Cable Strap Reduces Possibility of Wearing of Hose. {3016, 3264} 2004/08/02
LINES GP-POWER TRAIN OIL
New Suction Hose for the Output Transfer Gear Offers Improved Reliability {3154} 2003/07/28

Installing the New 233-9579 Suction Hose May Cause Cracking of the Output Transfer Gear Case Installing the New 233-9579 Suction Hose May Cause Cracking of the Output Transfer Gear Case

Procedure for Kidney Looping Articulated Truck Transmission Oil{0680, 0768, 3016, 3030} Procedure for Kidney Looping Articulated Truck Transmission Oil{0680, 0768, 3016, 3030}
LINES GP-TRANSMISSION OIL

Procedure to Test the Pressure of the Transmission Lubrication {3123, 3154} 2002/02/11
PUMP GP

Gear Pump (Differential Lock) 725 and 730 Articulated Trucks Power Train

Transmission Oil Pump 725 and 730 Articulated Trucks Power Train

Gear Pump (Output Transfer Gear) - Disassemble 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Gear Pump (Output Transfer Gear) - Assemble 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Gear Pump (Output Transfer Gear) - Remove 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Gear Pump (Output Transfer Gear) - Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train

A New Bearing for the Transmission Oil Pump Is Now Available {3066, 5073} 2004/09/20

Hydraulic Gear Pumps Used in Transmissions{3066, 5073} Hydraulic Gear Pumps Used in Transmissions{3066, 5073}
RETARDER GP

Retarder 725 and 730 Articulated Trucks Power Train

Retarder Troubleshooting 725 and 730 Articulated Trucks Power Train
Retarder - Test 725 and 730 Articulated Trucks Power Train

Retarder - Assemble - The No. 1 Rotating Clutch is included. 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Retarder - Disassemble - The No. 1 Rotating Clutch is included. 725, 730 and 730 EJECTOR Articulated Trucks Power Train
SCREEN GP

Torque Converter Scavenge Screen - Clean 725 and 730 Articulated Trucks
SEAL GP-DUO-CONE

Final Drive Duo-Cone Seal Assembly Information Update {7561} 2010/04/15
SHAFT GP

Front Drive Shaft 725 and 730 Articulated Trucks Power Train
Main Drive Shaft 725 and 730 Articulated Trucks Power Train
Rear Drive Shaft 725 and 730 Articulated Trucks Power Train
Hitch Drive Shaft 725 and 730 Articulated Trucks Power Train

Main Drive Shaft - Remove 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Front Drive Shaft - Remove and Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Hitch Drive Shaft - Remove and Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Hitch Drive Shaft Bearings - Remove 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Hitch Drive Shaft Bearings - Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Main Drive Shaft - Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Center Drive Shaft - Remove and Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Rear Drive Shaft - Remove and Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train

Lubrication and Maintenance of Drive Shaft Spiders on Articulated Trucks {3251, 3253} 2001/06/18
Changes to the Serviceability of Certain Universal Joint Groups {3251, 3253} 2013/08/12
Correction to Specifications , "Rear Drive Shaft" {3253} 2004/10/11
Correction to Operation and Maintenance Manual , "Maintenance Interval Schedule" {3251, 3253} 2007/08/20
Improvements Have Been Made to Carrier Assembly on Certain Articulated Trucks {3253} 2013/06/28

PRODUCT SUPPORT PROGRAM FOR INSPECTING THE HITCH DRIVESHAFT SPLINES ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR INSPECTING THE HITCH DRIVESHAFT SPLINES ON CERTAIN 725 AND 730 ARTICULATED TRUCKS
TANK GP

Oil Tank (Power Train) - Remove 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Oil Tank (Power Train) - Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train

An Improved Output Transfer Gear Oil Tank Breather Is Now Used {3177} 2003/01/27
An Improved Output Transfer Gear Oil Tank Breather Is Now Used {3177} 2003/05/05
TOOLS

Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings{3030, 3050, 3169, 3170, 3190} Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings{3030, 3050, 3169, 3170, 3190}

127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727} 127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
TORQUE CONVERTER GP

Torque Converter 725 and 730 Articulated Trucks Power Train

Torque Converter 725 and 730 Articulated Trucks Power Train

Torque Converter Troubleshooting 725 and 730 Articulated Trucks Power Train

Torque Converter - Assemble 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Torque Converter - Disassemble 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Transmission and Torque Converter Oil Filter - Remove and Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Torque Converter Housing - Remove 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Torque Converter Housing - Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train

Correction to Systems Operation, Troubleshooting, Testing and Adjusting , "Lockup Clutch Function" {4800} 2001/06/18
Correction to Disassembly and Assembly , "Torque Converter - Assemble" {3101} 2002/05/13
Assembly Tips for Torque Converter Bearings {3101} 2003/06/30
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129} 2013/03/21

Torque Converter and Transmission Oil - Change 725 and 730 Articulated Trucks
Torque Converter and Transmission Oil Sample - Obtain 725 and 730 Articulated Trucks
Torque Converter and Transmission Oil Level - Check 725 and 730 Articulated Trucks
Torque Converter and Transmission Oil Filter - Replace 725 and 730 Articulated Trucks

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE TRANSMISSIONS ON CERTAIN 725 AND 730 ARTICULATED TRUCKS TO INSURE THE TORQUE OF THE M-10 BOLTS IN THE CONVERTER AND CONVERTER HOUSING ARE CORRECT PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE TRANSMISSIONS ON CERTAIN 725 AND 730 ARTICULATED TRUCKS TO INSURE THE TORQUE OF THE M-10 BOLTS IN THE CONVERTER AND CONVERTER HOUSING ARE CORRECT
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TORQUE CONVERTER SLEEVE BEARINGS AND RELATED PARTS ON CERTAIN 725, AND 730 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TORQUE CONVERTER SLEEVE BEARINGS AND RELATED PARTS ON CERTAIN 725, AND 730 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TORQUE CONVERTER THRUST BEARINGS AND RELATED PARTS IN THE TRANSMISSIONS OF CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TORQUE CONVERTER THRUST BEARINGS AND RELATED PARTS IN THE TRANSMISSIONS OF CERTAIN 725 AND 730 ARTICULATED TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TORQUE CONVERTER SLEEVE BEARINGS AND RELATED PARTS ON CERTAIN 725, AND 730 ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TORQUE CONVERTER SLEEVE BEARINGS AND RELATED PARTS ON CERTAIN 725, AND 730 ARTICULATED TRUCKS

227-8380 TORQUE CONVERTER THRUST BEARING RACES 227-8380 TORQUE CONVERTER THRUST BEARING RACES

Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents{3030, 3101, 3133} Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents{3030, 3101, 3133}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions{3101, 3131} Turbine Wheel for Torque Converters Used with Power Shift Transmissions{3101, 3131}
Repair of Transmission, Torque Converter, and Torque Divider Shafts{3000, 3063, 3100} Repair of Transmission, Torque Converter, and Torque Divider Shafts{3000, 3063, 3100}
Thermal Spray Procedures for Torque Converter Turbine Wheel{0679, 3101, 3131} Thermal Spray Procedures for Torque Converter Turbine Wheel{0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller{0679, 3101, 3134} Thermal Spray Procedures for Torque Converter Impeller{0679, 3101, 3134}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts{0679, 0719, 3030, 3101, 3125, 3130} Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts{0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore{0679, 3101, 3135} Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore{0679, 3101, 3135}
Thermal Spray Procedures for Transmission and Torque Converter Yokes{0599, 0679, 3001, 3030, 3101, 3160} Thermal Spray Procedures for Transmission and Torque Converter Yokes{0599, 0679, 3001, 3030, 3101, 3160}
TRANSMISSION GP

Transmission Mounting 725 and 730 Articulated Trucks Power Train
Transmission Planetary 725 and 730 Articulated Trucks Power Train

Transmission Planetary 725 and 730 Articulated Trucks Power Train

Transmission Planetary Troubleshooting 725 and 730 Articulated Trucks Power Train
Transmission - Calibrate 725 and 730 Articulated Trucks Power Train
Transmission Oil Supply 725 and 730 Articulated Trucks Power Train
Transmission Fill - Calibrate - Using the Caterpillar Electronic Technician 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Transmission Fill - Calibrate - Using the Caterpillar Monitoring System 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
Transmission Fill - Calibrate 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT

MID 027 - CID 0718 - FMI 13 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT

Transmission Planetary - Assemble 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Transmission Planetary - Disassemble 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Transmission - Remove 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Transmission - Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train

Correction to Disassembly and Assembly , "Output Transfer Gears - Assemble" {3159} 2001/11/12
New Transmission Arrangements {3030} 2003/04/21
A Spool in ECPC Valves is No Longer Serviced {3030, 3155} 2003/08/04
Special Instruction, REHS1634, "Reworking of Latching Transmission to Nonlatching Transmission" is Available {3030} 2003/11/10
Revised Special Instruction, REHS1634, "Reworking of Latching Transmission to Nonlatching Transmission" is Available {3030} 2004/06/28
A New Modulating Valve Is Available {3030, 3139} 2004/08/16
An Improved Clutch Plate Is Used {3054, 3160} 2006/10/23
Improved Clutch Housing Assemblies Are Now Used {3030, 3155} 2007/02/26
A New Special Instruction REHS5750 Is Available For An Improved Design Of The Current Transmission Guard Mounting Points On Certain Articulated Trucks {3030} 2011/02/15

Reworking of Latching Transmission to Nonlatching Transmission{3030} Reworking of Latching Transmission to Nonlatching Transmission{3030}
Procedure To Strengthen The Transmission Guard Mounting Points On Certain Articulated Trucks{3030} Procedure To Strengthen The Transmission Guard Mounting Points On Certain Articulated Trucks{3030}

PRODUCT SUPPORT PROGRAM FOR REBUILDING A FAILED TRANSMISSION ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REBUILDING A FAILED TRANSMISSION ON CERTAIN 725 AND 730 ARTICULATED TRUCKS

Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material{3030, 3155, 3190} Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material{3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material{3030, 3155, 3190} Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material{3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with F37 and F37X Friction Material{3030, 3155, 3190} Transmission Clutch Plates and Disc Assemblies with F37 and F37X Friction Material{3030, 3155, 3190}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions{3054, 3155, 3160, 3190} Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions{3054, 3155, 3160, 3190}
Transmission Reuse and Salvage Manual Contents{0374, 3030} Transmission Reuse and Salvage Manual Contents{0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions{3030, 3155} Clutch Ring Gears For All Power Shift Transmissions{3030, 3155}
Reuse and Salvage of Transmission Components{3030} Reuse and Salvage of Transmission Components{3030}
Thermal Spray Procedures for Clutch Piston Inside Diameter{0679, 3160, 3170} Thermal Spray Procedures for Clutch Piston Inside Diameter{0679, 3160, 3170}
VALVE GP-BYPASS

Bypass Valve - Remove and Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train
VALVE GP-CONTROL

Control Valve (Transmission Clutch Latching) 725 and 730 Articulated Trucks Power Train

Control Valve (Transmission Clutch Latching) - Remove and Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train
VALVE GP-MODULATING

Modulating Valve 725 and 730 Articulated Trucks Power Train

Modulating Valve (Torque Converter Lockup Clutch) 725 and 730 Articulated Trucks Power Train

Modulating Valve (Torque Converter Lockup Clutch) - Test 725 and 730 Articulated Trucks Power Train

MID 027 - CID 1401 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1401 - FMI 05 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1401 - FMI 06 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1402 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1402 - FMI 05 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1402 - FMI 06 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1403 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1403 - FMI 05 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1403 - FMI 06 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1404 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1404 - FMI 05 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1404 - FMI 06 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1405 - FMI 03 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1405 - FMI 05 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1405 - FMI 06 725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System
MID 027 - CID 1401 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1401 - FMI 05 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1401 - FMI 06 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1402 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1402 - FMI 05 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1402 - FMI 06 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1403 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1403 - FMI 05 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1403 - FMI 06 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1404 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1404 - FMI 05 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1404 - FMI 06 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1405 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1405 - FMI 05 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1405 - FMI 06 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1406 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1406 - FMI 05 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1406 - FMI 06 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT

Modulating Valve (Torque Converter Lockup Clutch) - Remove and Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train

Modulating Valve Connectors May Not Be Fully Seated Modulating Valve Connectors May Not Be Fully Seated
VALVE GP-REDUCING

MID 027 - CID 1248 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1248 - FMI 05 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1248 - FMI 06 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
VALVE GP-RELIEF

Solenoid and Relief Valve (Output Transfer Gears) 725 and 730 Articulated Trucks Power Train
Solenoid and Relief Valve (Output Transfer Gears) 725 and 730 Articulated Trucks Power Train

Relief Valve (Torque Converter Outlet) - Remove and Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Relief Valve (Torque Converter Inlet) - Remove and Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train

A New Solenoid and Relief Valve Group for the Interaxle Differential Lock and the Cross Axle Differential Lock Improves Reliability {5571} 2003/03/10
Correction to Parts Manual for the 148-9368 Valve Gp - Solenoid and Relief {5571} 2005/07/11
VALVE GP-RETARDER CONTROL

Retarder Hydraulic Control Valve 725 and 730 Articulated Trucks Power Train

Retarder Hydraulic Control Valve - Remove and Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train
VALVE GP-SOLENOID

Solenoid Valve (Transmission Clutch Latching) 725 and 730 Articulated Trucks Power Train

MID 027 - CID 0709 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0709 - FMI 05 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0709 - FMI 06 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0971 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0971 - FMI 05 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0971 - FMI 06 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1100 - FMI 05 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1100 - FMI 06 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 1100 - FMI 03 725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT

Solenoid Valve (Transmission Clutch Latching) - Remove and Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train
WHEEL & FINAL DRIVE GP

Use Lubricant During Assembly of Duo-Cone Seal Groups in Certain Final Drive and Wheel Groups {4050, 4051} 2003/01/06

Thermal Spray Procedures for ADT Hub{0679, 4051} Thermal Spray Procedures for ADT Hub{0679, 4051}
WHEEL GP

Final Drive and Wheel 725 and 730 Articulated Trucks Power Train

Wheel Bearings and Duo-Cone Seals - Remove 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Wheel Bearings and Duo-Cone Seals - Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Tire and Rim - Remove 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Tire and Rim - Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train

Recommendations for Differences in Tire Sizes {4203} 2007/04/02
An Improved Torque Procedure For The Tire Inflation Valve Helps Eliminate Leaks On The Stem Assembly {4202} 2007/12/17

Tire Inflation Pressure Adjustment 725 and 730 Articulated Trucks
Tire Inflation - Check 725 and 730 Articulated Trucks
Tire Inflation with Nitrogen 725 and 730 Articulated Trucks
Tire Shipping Pressure 725 and 730 Articulated Trucks
Wheel Nut Torque - Check 725 and 730 Articulated Trucks

PRODUCT SUPPORT PROGRAM FOR REPLACING THE DUO CONE TORIC SEAL IN THE WHEEL GROUPS OF CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE DUO CONE TORIC SEAL IN THE WHEEL GROUPS OF CERTAIN 725 AND 730 ARTICULATED TRUCKS

Tires Have Been Improved On Articulated Trucks{4202} Tires Have Been Improved On Articulated Trucks{4202}
COOLER GP

Transmission Oil Cooler 725 and 730 Articulated Trucks Power Train

Transmission Oil Cooler - Remove 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

Transmission Oil Cooler - Install 725, 730 and 730 Ejector
Articulated Trucks
Engine Supplement

DRIVE GP-FINAL

Final Drive 725 and 730 Articulated Trucks Power Train

Final Drive - Remove 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Final Drive - Install 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Final Drive - Disassemble 725, 730 and 730 EJECTOR Articulated Trucks Power Train
Final Drive - Assemble 725, 730 and 730 EJECTOR Articulated Trucks Power Train

A New Steel Retainer for the Duo-Cone Seal Gp is Available for Articulated Trucks {4051} 2008/10/06
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMS
Procedure for Bonding the Caterpillar Nameplate to the Grille {7557} 2002/06/03
Ordering a Replacement Machine Identification Plate {7405, 7557} 2004/03/01
New ROPS Films, FOPS Films and TOPS Films Have Been Designed {7557} 2005/05/23

Updating the Certification Label for China{7557} Updating the Certification Label for China{7557}
GASKET & SEAL KITS

The Color of Certain O-Ring Seals Will Change {7555} 2002/12/09
The 1U-8846 Gasket Sealant Is Canceled {7555} 2011/02/02

The Color of Certain O-Ring Seals Is Changing {7555} 2002/12/01
The 1U-8846 Gasket Sealant Is Cancelled {7555} 2010/03/31

The Color of Certain O-Ring Seals Is Changing {7555} 2003/01/01
The 1U-8846 Gasket Sealant Is Cancelled {7555} 2010/03/22

Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555} Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
HARDWARE & SEALANTS

Chart for Heli-Coil Repair{0676} Chart for Heli-Coil Repair{0676}
LITERATURE GP

The Current Special Publication, PECP9067, "One Safe Source" Is Now Available Through The Internet {0374} 2002/05/13
Announcing the Combination of Groups Within the Paper Copies of the Caterpillar Parts Manuals {0374} 2002/06/03
The Contents Of The Service Manuals For All Caterpillar Machines Is Available On The Caterpillar Intranet {1000} 2002/12/02
"Tool and Shop Products Guide" by the Cat Service Technology Group (CSTG) Has Been Replaced by Two New Catalogs {0374} 2006/04/17

Caterpillar Service Welding Guide{0599, 0677, 0678, 0679} Caterpillar Service Welding Guide{0599, 0677, 0678, 0679}

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OPERATION AND MAINTENANCE MANUAL IN CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OPERATION AND MAINTENANCE MANUAL IN CERTAIN 725 AND 730 ARTICULATED TRUCKS

Contents for Thermal Spray Reference Manual{0374, 0679} Contents for Thermal Spray Reference Manual{0374, 0679}
LUBRICANTS & FLUIDS

Managing Engine Oil Service Levels {1348} 2007/06/18

Steering Cylinder Bearings - Lubricate 725 and 730 Articulated Trucks
Suspension and Suspension Cylinder Bearings - Lubricate 725 and 730 Articulated Trucks
MISCELLANEOUS INFORMATION

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING 3E5239 RELAYS WITH A DATE CODE OF 0247 ON VARIOUS MODELS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING 3E5239 RELAYS WITH A DATE CODE OF 0247 ON VARIOUS MODELS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 1169846 PRESSURE SWITCHES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 1169846 PRESSURE SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING PARTS FROM DEALER STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING PARTS FROM DEALER STOCK
PARTS STOCK, ORDERING & RETURN
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING 0R0997, 0R1000, 0R1001, 0R1002, 0R1003, 0R1004, 0R1005, AND 0R1006 REMAN WATER PUMPS IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING 0R0997, 0R1000, 0R1001, 0R1002, 0R1003, 0R1004, 0R1005, AND 0R1006 REMAN WATER PUMPS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4331 AND 10R4333 REMAN ELECTRONIC CONTROL MODULES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4331 AND 10R4333 REMAN ELECTRONIC CONTROL MODULES FROM DEALER PARTS STOCK
REBUILD & SALVAGE

1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679} 1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679}

Fundamentals of Arc Spray for Reconditioning Components{0679} Fundamentals of Arc Spray for Reconditioning Components{0679}
TOOLS

Cat Service Tools Releases New Hose Cutting Machine {0678, 0684} 2004/03/29
New Pry Bars Have Striking Caps on Handles {0607} 2004/04/01
Twist Impact Sockets Grip Fasteners as Torque is Applied {0601} 2004/03/29
249-2813 Water Filter Gp is Available for Shop Applications that Require Water Filtration {0699} 2004/07/05
210-6990 Pressure Gauge (LCD Display, 0 to 500-PSI) Is Available for Use by Technicians {0770} 2004/06/28
Lockout Valves Shut Off Air Supply in the Service Shop {0699} 2005/04/25
Disposable Dessicant Filter is Now Available {0618, 0646} 2006/02/13
Slide Sledge Heavy Equipment Repair Tools Are Now Available {0599, 0644} 2006/04/17
Use Only Cleaning Agents that are Water Based with the 212-1503 Parts Washer Kit {0680} 2006/10/02
Increased Support for Repair Parts is Available for Products that are sold by Dealer Service Tools from Advanced Technology Services {0599} 2008/04/14
Component Cleaners That Contain Trichloroethylene (TCE) Must Not Be Used On Electrical Connectors {0709} 2010/02/22

138-7573, 138-7574, 138-7575, 138-7576, 241-3790, and 241-3792 Link Bracket Assemblies{0632, 7063, 7063} 138-7573, 138-7574, 138-7575, 138-7576, 241-3790, and 241-3792 Link Bracket Assemblies{0632, 7063, 7063}
Compact DPF Cleaner{0599, 0701, 0702, 108F} Compact DPF Cleaner{0599, 0701, 0702, 108F}
Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200} Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200}
415-4055 Ultrasonic Wear Indicator IV Group{0787, 7000} 415-4055 Ultrasonic Wear Indicator IV Group{0787, 7000}

Procedure for Adding Filtration Capability to Solvent Stands{0680} Procedure for Adding Filtration Capability to Solvent Stands{0680}
WARRANTY

Provide Proper Documentation of Returned Parts within the Warranty Claim {1000} 2004/03/22
PROTECTION GP
An Improved Corporate Padlock Is Available {7430} 2004/03/22
New Packaging for Caterpillar Electronic Control Modules (ECM) {1901} 2007/08/13
KIT-REBUILD
Precious Metals Engine Rebuild Kits Are Available for 3176 Machine Engines {1000} 2012/12/10

1U-8846 Gasket Sealant Has Been Removed From 3N-5904 Gear Seal Kit {1000, 7000} 1U-8846 Gasket Sealant Has Been Removed From 3N-5904 Gear Seal Kit {1000, 7000}
STEERING SYSTEM
LINES GP

New Hoses For the Steering Cylinders Are Available {4304} 2004/05/03

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STEERING TUBES ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STEERING TUBES ON CERTAIN 725 AND 730 ARTICULATED TRUCKS
PUMP GP-METERING

A New Steering Metering Pump Is Now Available {4312} 2004/04/12
Improvements to the Steering System Have Been Made {4312, 4338} 2007/09/10
STEERING COLUMN GP
The Steering Column Is Improved {4338} 2007/02/12
Improved Pivot Kits Are Now Available For Steering Columns {4310, 4338} 2009/05/25
New Pivot Kits Are Available For Steering Columns {4310, 4338} 2009/01/19

Installation of Pivot Kit For Steering Columns{4310, 4338} Installation of Pivot Kit For Steering Columns{4310, 4338}
Procedure to Apply Dielectric Grease to the Horn (Cruise Control) Contact Ring{4310} Procedure to Apply Dielectric Grease to the Horn (Cruise Control) Contact Ring{4310}
VALVE GP

Steering Check and Combiner Valve 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Signal and Pressure Reducing Valve (Steering) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Check Valve (Steering System Return) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Check Valve (Steering System Return) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

Signal and Pressure Reducing Valve (Steering) - Check 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

Steering Check and Combiner Valve - Remove and Install 725 and 730 Articulated Trucks Machine Systems
Signal and Pressure Reducing Valve (Steering) - Remove and Install 725 and 730 Articulated Trucks Machine Systems

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SNUBBER RELIEF VALVES ON CERTAIN 725 AND 730 ARTICULATED TRUCK STEERING CYLINDERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SNUBBER RELIEF VALVES ON CERTAIN 725 AND 730 ARTICULATED TRUCK STEERING CYLINDERS
PRODUCT IMPROVEMENT PROGRAM REPLACING THE STEERING CYLINDER RELIEF VALVES ON CERTAIN 725, 730 AND 740 ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM REPLACING THE STEERING CYLINDER RELIEF VALVES ON CERTAIN 725, 730 AND 740 ARTICULATED TRUCKS
CYLINDER GP

Steering Cylinder 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Steering Cylinder 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

Steering Cylinder - Remove and Install 725 and 730 Articulated Trucks Machine Systems

Improved Tightening Procedure for the Bolt on the Piston in the Steering Cylinder {4303} 2006/02/27
Correction to Disassembly and Assembly , "Steering Cylinder - Remove and Install" {4303} 2006/02/27
Improved Cylinder Relief Valve {4303} 2008/09/22

PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER TRANSFER TUBE ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER TRANSFER TUBE ON CERTAIN 725 AND 730 ARTICULATED TRUCKS
PUMP GP

Metering Pump (Steering) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Secondary Steering Pump and Electric Motor 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Metering Pump (Steering) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

Piston Pump (Steering) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Metering Pump (Steering) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Metering Pump (Steering) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Metering Pump (Steering) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

Piston Pump (Steering) - Test and Adjust 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Load Sensing Pressure (Steering) - Test 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Metering Pump (Steering) - Test 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Electric Drive Pump (Secondary Steering) - Check 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Electric Drive Pump (Secondary Steering) - Check 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

Piston Pump (Steering) - Assemble 725 and 730 Articulated Trucks Machine Systems
Piston Pump (Steering) - Disassemble 725 and 730 Articulated Trucks Machine Systems
Secondary Steering Pump and Electric Motor - Disassemble 725 and 730 Articulated Trucks Machine Systems
Secondary Steering Pump and Electric Motor - Assemble 725 and 730 Articulated Trucks Machine Systems
Secondary Steering Pump and Electric Motor - Remove 725 and 730 Articulated Trucks Machine Systems
Secondary Steering Pump and Electric Motor - Install 725 and 730 Articulated Trucks Machine Systems
Piston Pump (Steering) - Remove 725 and 730 Articulated Trucks Machine Systems
Piston Pump (Steering) - Install 725 and 730 Articulated Trucks Machine Systems
Secondary Steering Pump and Electric Motor - Remove 725 and 730 Articulated Trucks Machine Systems
Secondary Steering Pump and Electric Motor - Install 725 and 730 Articulated Trucks Machine Systems
Metering Pump (Steering) - Remove and Install 725 and 730 Articulated Trucks Machine Systems

Correction to Systems Operation, Testing and Adjusting , "Piston Pump (Steering) - Test and Adjust" {4324} 2001/06/18
SUSPENSION SYSTEM
ACCUMULATOR GP

Hydraulic Accumulator (Suspension) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Hydraulic Accumulator (Suspension) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

Hydraulic Accumulator (Suspension) - Test and Charge 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

Suspension Accumulator - Remove and Install 725 and 730 Articulated Trucks Machine Systems

Correction to Specifications , "Hydraulic Accumulator (Suspension)" {5077} 2004/02/02

Suspension Accumulator Precharge - Check 725 and 730 Articulated Trucks
FRAME GP-SUSPENSION

Front Suspension Frame - Remove 725 and 730 Articulated Trucks Machine Systems
Front Suspension Frame - Install 725 and 730 Articulated Trucks Machine Systems
Center Axle Stabilizer Rod - Remove and Install 725 and 730 Articulated Trucks Machine Systems
Rear Axle Stabilizer Rod - Remove and Install 725 and 730 Articulated Trucks Machine Systems
Front Axle Stabilizer Rod - Remove and Install 725 and 730 Articulated Trucks Machine Systems
Center Suspension Frame - Remove 725 and 730 Articulated Trucks Machine Systems
Center Suspension Frame - Install 725 and 730 Articulated Trucks Machine Systems
Rear Suspension Frame - Remove 725 and 730 Articulated Trucks Machine Systems
Rear Suspension Frame - Install 725 and 730 Articulated Trucks Machine Systems

Correction to Disassembly and Assembly , "Rear Suspension Frame - Install" {7203} 2002/07/08
Correction to Disassembly and Assembly , "Center Suspension Frame - Install" {7203} 2002/07/08

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE MOUNTING BOLTS ON CERTAIN 725, 730, 740 EJECTOR, AND 740 ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE MOUNTING BOLTS ON CERTAIN 725, 730, 740 EJECTOR, AND 740 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SUSPENSION MOUNTS ON CERTAIN 725, 730, 735, 740 EJ, AND 740 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SUSPENSION MOUNTS ON CERTAIN 725, 730, 735, 740 EJ, AND 740 ARTICULATED TRUCKS
LINES GP-SUSPENSION

Replacement Flow Control Valve is Available {7218} 2013/02/14
MISCELLANEOUS INFORMATION
Wear Limits for the Mounts for the Rear Suspension {7203, 7207} 2005/04/11
SUSPENSION GP

Suspension Height (Front) - Check and Adjust 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

Equalizer Arm - Remove and Install 725 and 730 Articulated Trucks Machine Systems

Installation Procedure for the Conical Bushing in The Equalizer Arms for the Suspension on the Rear Frame {7203, 7207} 2002/03/25
Wear Limits for the Mounts for the Rear Suspension {7203, 7207} 2001/07/23
Wear Limits for the Mounts for the Rear Suspension {7203, 7207} 2006/02/20
Correction to Operation and Maintenance Manual , "Suspension System Height - Check/Adjust" {7200, 7200} 2002/07/29
New Mounts for the Rear Suspension Are Available {7203, 7207} 2004/11/08
New Torque Procedure for the Equalizer Arm {7207} 2007/12/10

Suspension System - Purge 725 and 730 Articulated Trucks
Suspension System - Check 725 and 730 Articulated Trucks
Suspension System - Check/Adjust 725 and 730 Articulated Trucks

Wear Limits For The Mounts For The Rear Suspension Wear Limits For The Mounts For The Rear Suspension
CYLINDER GP

Suspension Cylinder (Front) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Suspension Cylinder (Front) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

Suspension Cylinder (Front) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems
Suspension Cylinder (Front) 725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems

Front Suspension Cylinder - Remove 725 and 730 Articulated Trucks Machine Systems
Front Suspension Cylinder - Install 725 and 730 Articulated Trucks Machine Systems
Front Suspension Cylinder - Remove 725 and 730 Articulated Trucks Machine Systems
Front Suspension Cylinder - Install 725 and 730 Articulated Trucks Machine Systems

New Suspension Cylinders Are Now Installed {7201} 2003/12/08
Service Parts for the Suspension Cylinder Are Available Worldwide {7201} 2006/11/06
Improved Seals in the Suspension Cylinders Are Now Used {7201} 2007/09/03
A New Seal Kit Is Available for the Struts on Articulated Trucks {7201} 2009/09/14
New Front Struts Are Being Used in Production {7201} 2012/04/11

PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT SUSPENSION CYLINDER ROD SEALS ON CERTAIN 725, 730, 730EJ, 735, 740 AND 740EJ ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT SUSPENSION CYLINDER ROD SEALS ON CERTAIN 725, 730, 730EJ, 735, 740 AND 740EJ ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT SUSPENSION CYLINDER ROD SEALS ON CERTAIN 725, 730, 735, 740, 730EJ AND 740EJ ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT SUSPENSION CYLINDER ROD SEALS ON CERTAIN 725, 730, 735, 740, 730EJ AND 740EJ ARTICULATED TRUCKS
UNDERCARRIAGE
IDLER GP

Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159} 2004/08/16

Installation of Conventional Duo-Cone Seals{7561} Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561} Installation of Inverted Duo-Cone Seals{7561}

Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180} Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
TRACK GP
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787} 168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
WORK TOOLS
BUCKET GP
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800} Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
GROUND ENGAGING TOOLS (G.E.T.)

398-6784 Recommended J Series Two Strap Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805} 398-6784 Recommended J Series Two Strap Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805} 398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805} 256-2928 Recommended K Series Two Strap Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805} 256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}

Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800} Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}





You can buy on Amazon: .

$143.07
06-09-2017