FEEDER BREAKER Caterpillar SIS online


FEEDER BREAKER
FB75 P FEEDER BREAKER FBC

Select model FEEDER BREAKER:





Information:

(For parts list, you need select model above)

AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP

The Durability of the Air Filter Change Indicator Assembly Is Increased {1051, 1054} 2005/01/24

Caterpillar Certified Procedure to Inspect and Clean Air Filters{1051, 1054} Caterpillar Certified Procedure to Inspect and Clean Air Filters{1051, 1054}
EXHAUST GP
Diesel Particulate Filter Monitoring System{1091, 7490} Diesel Particulate Filter Monitoring System{1091, 7490}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091} Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
TURBOCHARGER GP

A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052} 2003/02/24
Policy for Reusing the Turbocharger Turbine Housing {1065} 2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052} 2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307} 2006/02/06
A New Cover Protects the Shaft for the Turbocharger from Contamination {1052, 1053} 2006/10/09

A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052} 2002/12/01
BASIC ENGINE
AIR COMPRESSOR GP

A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803} 2004/11/15
CRANKSHAFT GP
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202} 2006/01/16
CYLINDER BLOCK GP
The Oil Pressure Switch for the Engine Is Improved {1201, 1435} 2005/05/23

The Oil Pressure Warning Indicators May Remain Activated In Cold Weather Conditions On Certain Excavators The Oil Pressure Warning Indicators May Remain Activated In Cold Weather Conditions On Certain Excavators
CYLINDER HEAD GP

Caterpillar Warranty Claims on Cylinder Head Valves {1105} 2005/10/03

Engine Valve Failure Modes{1100, 1105} Engine Valve Failure Modes{1100, 1105}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100} Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
DRIVE GP-FAN

The Durability of the Fan Pulley Is Increased in a New Fan Drive Gp {1359} 2005/12/26
GEAR GP
An Improved Front Gear Group is Now Used {1206} 2004/03/29
An Improved Front Gear Group is Now Used {1206} 2004/06/21
PAN GP-OIL
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613} 2006/03/20
The Seal for the Oil Level Switch Is Now Available {1302, 7422} 2006/11/27
Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422} 2006/11/13
PISTON & ROD GP
New Guidelines for Inspecting Pistons {1214} 2006/01/02
VALVE MECHANISM GP
A New Gasket for the Engine Valve Cover Prevents Oil Leaks {1107} 2005/01/24
BRAKING SYSTEM
TOOLS
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738} 2004/07/05
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784} 2004/12/27
COOLING SYSTEM
COOLER GP
New Gaskets Are Now Available for the Oil Filter Base and the Oil Cooler on Certain 3116, 3126, and C7 Machines Engines {1306, 1378} 2004/02/09
100% Leak Testing of Oil Coolers {1378} 2007/04/23

100% Leak Testing of Oil Coolers {1378} 2007/04/30
FAN GP

The Durability of the Fan Pulley Is Increased in a New Fan Drive Gp {1359} 2004/11/01
TOOLS
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542} 2004/12/01
ELECTRICAL AND STARTING SYSTEM
ALARM GP

Installation of 244-1090 Alarm Gp {7400, 7402, 7407} Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 262-6141 Alarm Gp {7406} Installation of 262-6141 Alarm Gp {7406}
BATTERY GP

Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B} Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
ELECTRONICS GP-ENGINE

Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620} 2007/10/01

277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930} 2006/09/01
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620} 2007/10/22

A False Diagnostic Code is Generated When Flashing Software in Some Excavators{1901, 1902, 7600, 7610, 7620} A False Diagnostic Code is Generated When Flashing Software in Some Excavators{1901, 1902, 7600, 7610, 7620}
ELECTRONICS GP-POWER TRAIN

277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783} 2007/10/22
INSTALLATION GP
Improved End - of - Line - Test Fixture for the Product Link Antenna is Now Used {7606} 2006/11/13
MOTOR GP
An Improved Starting Motor is Now Available {1453} 2007/04/30
A New Starter Solenoid is Now Available {1467} 2008/03/17
SENSOR GP
Preventing Oil Leaks from the Pressure Sensors on the Main Hydraulic Pump {5057, 5070} 2007/04/02
SWITCH GP
Troubleshooting Procedures for the Control Panel {1408, 1802, 5057, 5258, 5479, 7490} 2006/02/06
A New Backup Switch for the Engine Speed Control Is Available {1408, 1435} 2006/11/27
Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332} 2007/07/23
Troubleshooting Procedure for the Engine Oil Pressure Switch {1403, 1408} 2007/08/06

Machine Start Switch Key May Not Fit Properly{1416} Machine Start Switch Key May Not Fit Properly{1416}
TOOLS

260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785} 2005/03/07
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782} 2006/11/27
Updated Instruction For The Bypass Harness {0785, 1408} 2008/03/17

The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785} 2004/04/19
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408} 2006/03/20
Enhanced Voltmeter Leads Are Now Available {0785} 2006/02/01
Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785} 2006/10/01
WIRING GP

The Pressure Sensors for the Main Hydraulic Pump and the Coil for the Refrigerant Compressor are Improved {1408, 1802, 5057, 5059, 5456} 2004/06/21
Service of the Machined Terminals and the Stamped and Formed Terminals {7553} 2006/11/13

Ampseal 16 Connector Peripheral Seal Servicing{7553} Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553} Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
ELECTRONICS GP-COMMUNICATION

New Product Link Software Is Now Available {7606, 7620} 2005/12/19
New Software Available for Product Link {7606, 7620} 2006/10/16
New Product Link Software Is Now Available {7606, 7620} 2007/05/14
New Product Link Hardware Is Now Available {7606} 2007/05/07
New Software for Product Link is Now Available {7606, 7620} 2008/03/10

Product Link Antenna Placement{7606} Product Link Antenna Placement{7606}
Product Link Hours Versus Service Meter Hours Accuracy Issue{7606} Product Link Hours Versus Service Meter Hours Accuracy Issue{7606}
CAMERA GP

Generic Installation of the WAVS Cleaning System{7348} Generic Installation of the WAVS Cleaning System{7348}
ENGINE ARRANGEMENT
ENGINE AR

New Replacement Options for Serviced Engines {1000} 2007/08/20

New Replacement Options for Serviced Engines{1000} New Replacement Options for Serviced Engines{1000}

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752} A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
TOOLS

New Kits Are Available to Repair Cracks and Threads in Ductile Iron {0676, 0685} 2006/02/06
FRAME AND BODY
DOOR GP
A New Lock Assembly for the Hood and Access Doors Is Available {5822, 7273} 2007/02/05
GEAR & BEARING GP
Installation of the Correct Dust Seal in the Swing Gear and Bearing {7063} 2005/04/04
Procedure for the Measurement of the Movement of the Swing Bearing {5459, 7063} 2007/11/05
Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA} 2006/03/27
SEAL GP

Assembly and Installation of Inverted Duo-Cone Seals{7561} Assembly and Installation of Inverted Duo-Cone Seals{7561}
FUEL SYSTEM
CONTROL GP-GOVERNOR

Governor Motor Governor Motor
FILTER GP-FUEL

The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263} 2007/07/30

Installation of Fuel/Water Separator{1260, 1263} Installation of Fuel/Water Separator{1260, 1263}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348} Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
GOVERNOR GP

248-4754 Engine Harness As () (Governor Breakout) Available for Voltage Checks at Governor {0706, 0785, 1251, 1264} 2006/03/20
PUMP GP-FUEL INJECTION
Improved O-Ring Seals for Fuel Injectors for Longer Seal Life {1254} 2003/10/20
An Improved Governor Housing is Now Available {1251} 2004/06/14
Design Changes in Order to Improve Performance of Tier II Engines {1000, 1290} 2006/07/24
PUMP GP-FUEL PRIMING

Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258} Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
TANK GP-FUEL

Updated Fuel Tank Caps Are Now Available {1273} 2004/03/15
Updated Fuel Tank Caps Are Now Available {1273} 2003/12/22
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000} 2005/12/19

Improvements Can Prevent Water Accumulation In The Fuel Tank For Certain Excavators Improvements Can Prevent Water Accumulation In The Fuel Tank For Certain Excavators
HYDRAULIC SYSTEM
ACCUMULATOR GP

Procedure for Testing and Charging the Pilot System Accumulators {5077} 2003/05/05
ACTUATOR GP
A new Retainer and a new Adjuster Improve the Head Group on the Main Hydraulic Pump {5070, 5078} 2007/06/04
COOLER GP
The Core Assembly in the Hydraulic Oil Cooler Is Improved {1374} 2007/03/12
The Oil Cooler Core Assembly Is Improved {1374} 2005/12/05
COUPLING GP
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057} 2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057} 2004/06/28
CYLINDER GP

Installation of Double Lip Wiper Seal{7562} Installation of Double Lip Wiper Seal{7562}

The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562} The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562} Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
DRIVE GP

Improved Breather Assemblies for the Swing Drives Are Available {5459} 2006/09/11
FILTER GP
A Replacement Filter Is Incorrectly Identified {5050, 5068} 2002/12/23
Optional High Efficiency Filters Are Now Available {3004, 5068} 2007/12/17
An Improved Oil Filter Group for the Case Drain Filter Is Available {5056, 5068, 5091} 2007/04/02
LINES GP
The 6V-8633 Connector Has Changed {5057, 7553} 2005/11/28
LINES GP-COUPLER
New Hose Assemblies Improve the Coupler Lines Group {5057, 5133, 6129} 2005/05/23
LINES GP-FRONT
An Improved Solenoid and Relief Valve is Available for Auxiliary Lines {5051, 5057} 2004/04/12
LINES GP-HYDRAULIC
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057} 2006/02/13
MOTOR GP

Test Specifications for Vane Cartridges{0784, 5058, 5070} Test Specifications for Vane Cartridges{0784, 5058, 5070}
PUMP GP

Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084} 2005/04/25
Orifices Are Available for a Worn Bore in the Pump Actuator {5070, 5078} 2006/07/31
TANK GP
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738} 2004/03/29
TOOLS
New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738} 2004/05/03
Remove Certain 6D-7726 Hose Assemblies from Inventory {0738} 2005/12/12
VALVE GP-CONTROL
A New Main Control Valve Has Improved O-Ring Seal Plugs {5051} 2004/05/24
A New Relief Valve Improves Controllability of the Boom and the Stick {5069, 5117} 2005/05/23
VALVE GP-LOAD CONTROL
New Pilot Valves With New Plugs Prevent Hydraulic Fluid Leaks {5067, 5117, 5147, 5811} 2004/10/11
The Load Control Valve (Drift Reduction Valve) for the Boom Is Improved {5067, 5117, 5147, 5811} 2006/02/27
VALVE GP-PILOT

The Pilot Valve May Generate Noise And Not Operate Smoothly On Certain Excavators The Pilot Valve May Generate Noise And Not Operate Smoothly On Certain Excavators
VALVE GP-RELIEF
A New Line Relief Valve Improves Controllability Of The Stick On Certain Excavators A New Line Relief Valve Improves Controllability Of The Stick On Certain Excavators
VALVE GP-SHUTTLE

A New Shuttle Valve Is Available {5079, 5705} 2006/06/05
VALVE GP-SOLENOID
Improved Solenoid Valve Groups Are Available {5479} 2008/02/25
LUBRICATION SYSTEM
BREATHER GP
A New Oil Filler Cap for the Engine Is Available {1317} 2007/04/16
OIL CHANGE GP-HIGH SPEED
New Cat QuickEvac<SUP>TM</SUP> High Speed Oil Change Arrangements Are Available {1302, 1372} 2003/03/10
New QuickEvac High Speed Oil Change Arrangements Are Available {1325} 2003/05/05

Installation and Operation of the Cat QuickEvac<SUP>TM</SUP> System{0707, 1325} Installation and Operation of the Cat QuickEvacTM System{0707, 1325}
Supplement to the Operation and Maintenance Manual{0707} Supplement to the Operation and Maintenance Manual{0707}
OPERATOR STATION
AIR CONDITIONER GP

Support Literature Is Now Available For Maintaining Excavator Heating and Air Conditioning Systems {7309, 7320} 2007/07/30
New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342} 2003/05/05
Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320} 2004/05/17
The Durability of the Idler Pulley Assembly in the Refrigerant Compressor Gp Is Improved {1358, 1802} 2005/06/27

The Clutch In The Compressor May Fail If The Refrigerant Charge Exceeds Specifications The Clutch In The Compressor May Fail If The Refrigerant Charge Exceeds Specifications
Replacement Of The V-Belt In The Refrigerant Compressor Group On Certain Excavators Replacement Of The V-Belt In The Refrigerant Compressor Group On Certain Excavators
CAB GP

Ordering a Replacement Operator Protective Structure (OPS) Certification Film {7323, 7325, 7405, 7557} 2007/02/12
CONSOLE GP
Improved Cases for the Operator Console Are Available {5258} 2007/05/28
MONITOR GP
The Operator Monitor Gp is Improved {7490} 2004/05/03
The Operator Monitor Gp Is Improved {7490} 2005/03/07
RADIO GP
New Processes Improve Registration of Product Link {7338, 7606} 2008/04/14

Miswiring Issues with Installation of the Product Link 121 and Product Link 321{7606} Miswiring Issues with Installation of the Product Link 121 and Product Link 321{7606}
Product Link Registration Problems{733T, 7606} Product Link Registration Problems{733T, 7606}
SEAT GP

The Cab Seat Is Improved {7312} 2006/08/14
A Seat Suspension Group With Improved Welds in the Frame Is Available {7324} 2006/01/02
WASHER GP-WINDOW
Washer Pump Assemblies Must Be Primed Properly {7306} 2007/08/06
WINDOW GP
Incorrect Adjustment of the Switch for the Windshield Prevents the Windshield Wiper from Operating {7305, 7340} 2006/03/27
POWER TRAIN
AXLE GP
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050} 2004/04/12
FILTER GP
Understanding Transmission Filter Plugging Events {3004, 3067} 2007/04/02
DRIVE GP-FINAL
Managing the Life Cycles of Excavator Final Drives {4050} 2007/07/16
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMS
Ordering a Replacement Machine Identification Plate {7405, 7557} 2004/03/01
New ROPS Films, FOPS Films and TOPS Films Have Been Designed {7557} 2005/05/23
Reminder: Operators must be Aware of Possible Work Tool Interference with the Cab {7405} 2006/03/13
GASKET & SEAL KITS

The Color of Certain O-Ring Seals Is Changing {7555} 2002/12/01

The Color of Certain O-Ring Seals Is Changing {7555} 2003/01/01
LITERATURE GP

"Tool and Shop Products Guide" by the Cat Service Technology Group (CSTG) Has Been Replaced by Two New Catalogs {0374} 2006/04/17
LUBRICANTS & FLUIDS
Managing Engine Oil Service Levels {1348} 2007/06/18
TOOLS
Cat Service Tools Releases New Hose Cutting Machine {0678, 0684} 2004/03/29
New Pry Bars Have Striking Caps on Handles {0607} 2004/04/01
Twist Impact Sockets Grip Fasteners as Torque is Applied {0601} 2004/04/01
249-2813 Water Filter Gp is Available for Shop Applications that Require Water Filtration {0699} 2004/07/05
210-6990 Pressure Gauge (LCD Display, 0 to 500-PSI) Is Available for Use by Technicians {0770} 2004/07/01
Lockout Valves Shut Off Air Supply in the Service Shop {0699} 2005/04/25
Disposable Dessicant Filter is Now Available {0618, 0646} 2006/02/13
Slide Sledge Heavy Equipment Repair Tools Are Now Available {0599, 0644} 2006/04/17
Use Only Cleaning Agents that are Water Based with the 212-1503 Parts Washer Kit {0680} 2006/10/02
Increased Support for Repair Parts is Available for Products that are sold by Dealer Service Tools from Advanced Technology Services {0599} 2008/04/14
WARRANTY
Provide Proper Documentation of Returned Parts within the Warranty Claim {1000} 2004/05/10
PROTECTION GP
An Improved Corporate Padlock Is Available {7430} 2004/03/22
UNDERCARRIAGE
IDLER GP
Increased Strength of the Idler Shaft Improves the Durability of the Front Idler Gp {4159} 2004/12/13
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159} 2004/08/16
The Strength of the Idler Wheel in a New Front Idler Group Is Increased {4159} 2005/07/04

Installation of Conventional Duo-Cone Seals{7561} Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561} Installation of Inverted Duo-Cone Seals{7561}
TRACK ADJUSTER & RECOIL GP

The Nut For The Spring In The Track Adjuster And Recoil Group May Become Loose On Certain Excavators The Nut For The Spring In The Track Adjuster And Recoil Group May Become Loose On Certain Excavators
TRACK GP

Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768} 2006/02/27
UNDERCARRIAGE GP

The Welds That Join The Carbody Frame And The Track Roller Frame May Crack On Certain Excavators The Welds That Join The Carbody Frame And The Track Roller Frame May Crack On Certain Excavators
WORK TOOLS
BUCKET GP

Installation Procedure For The K Series Drive Through Tooth System {6805, 6822} 2007/11/26
The Special Instruction, REHS2834 , "Converting Straight Edge Buckets from the J-Series Base Edge Assemblies to the K-Series" Is Now Available. {6523, 6800, 6803, 6823} 2005/12/05

Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805} Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}

Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822} Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
GROUND ENGAGING TOOLS (G.E.T.)

Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805} 2006/02/06





Truck sale:

You can buy on Amazon: .