PUMPER Caterpillar SIS online


OK request send
PUMPER
SPT343 PUMPER 5XZ

Select model PUMPER:





Information:

(For parts list, you need select model above)

AIR INLET AND EXHAUST SYSTEM
AFTERCOOLER GP

Aftercooler - Jacket Water Aftercooler 3512B and 3512C Engines For Caterpillar Built Machines

MID 036 - CID 0279 - FMI 03 Aftercooler Temperature open/short to +batt 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0279 - FMI 04 Aftercooler Temperature short to ground 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Aftercooler - Remove and Install 3500B Engines

A New Aftercooler Core is Used {1063, 1064} 2004/09/01
A New Aftercooler Core is Used {1063, 1064} 2006/01/30

Maintenance Requirements for Engines with Crankcase Ventilation Systems{1051, 1054, 1063, 1317} Maintenance Requirements for Engines with Crankcase Ventilation Systems{1051, 1054, 1063, 1317}
AIR CLEANER GP

Air Cleaner - Remove and Install 3500B Engines

Engine Air Cleaner Element (Single Element) - Clean/Replace SPT343 Truck Mounted Pumper
Engine Air Cleaner Differential Pressure - Check SPT343 Truck Mounted Pumper
EXHAUST GP

Air Inlet and Exhaust Lines 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Measuring Exhaust Temperature 3512B and 3512C Engines For Caterpillar Built Machines

Exhaust Elbow - Remove and Install 3500B Engines

A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091} 2004/01/01

A Previous High Temperature Locknut is Used in Engine Exhaust System Groups {7553} 2003/08/01

Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091} Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
MANIFOLD GP-EXHAUST

Exhaust Manifold 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Exhaust Manifold - Remove and Install 3500B Engines

Improved Gasket for the Exhaust Elbow {1059} 2003/11/01
Improved Exhaust Seal for the Exhaust Manifold {1059} 2003/11/01
Improved Turbocharger Water Lines are Used {1052, 1059, 1380} 2004/07/01

BOLT BREAKAGE AT EXHAUST MANIFOLD SLIP JOINTS BOLT BREAKAGE AT EXHAUST MANIFOLD SLIP JOINTS
MANIFOLD GP-INLET

Measuring Inlet Manifold Pressure 3512B and 3512C Engines For Caterpillar Built Machines

Air Inlet Manifold - Remove and Install 3500B Engines
SHUTOFF GP-AIR

MID 036 - CID 0446 - FMI 05 Air Shutoff Relay open 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0446 - FMI 06 Air Shutoff Relay short 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Air Shutoff System 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Air Shutoff - Disassemble 3500B Engines
Air Shutoff - Assemble 3500B Engines
Air Shutoff - Remove and Install 3500B Engines

New Air Shutoff Valves are Now Used {1078} 2006/01/02

Modifying the Air Shutoff Valve{1078, 1078} Modifying the Air Shutoff Valve{1078, 1078}

Product Improvement Program to relocate limit switches and add vibration dampers to the Air Shut Offs(ASOs) on certain 3500 diesel engines. Product Improvement Program to relocate limit switches and add vibration dampers to the Air Shut Offs(ASOs) on certain 3500 diesel engines.
PRODUCT IMPROVEMENT PROGRAM TO RELOCATE LIMIT SWITCHES AND ADD VIBRATION DAMPERS TO THE AUTOMATIC AIR SHUTOFFS(ASOS) ON CERTAIN 3508, 3512, AND 3516 ENGINES PRODUCT IMPROVEMENT PROGRAM TO RELOCATE LIMIT SWITCHES AND ADD VIBRATION DAMPERS TO THE AUTOMATIC AIR SHUTOFFS(ASOS) ON CERTAIN 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING AIR SHUTOFF VALVES ON CERTAIN 3512B OIL WELL SERVICING ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING AIR SHUTOFF VALVES ON CERTAIN 3512B OIL WELL SERVICING ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING AIR SHUTOFF VALVES ON CERTAIN 3512B OIL WELL SERVICING ENGINES PRODUCT IMPROVEMENT PROGRAM FOR UPDATING AIR SHUTOFF VALVES ON CERTAIN 3512B OIL WELL SERVICING ENGINES
TOOLS

Thermocouple Assembly (Exhaust) Measures Engine Exhaust Temperatures {0701, 0776, 0781} 2004/04/01
TURBOCHARGER GP

Turbocharger Inlet Pressure Sensor 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Turbocharger 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Turbocharger 3512B and 3512C Engines For Caterpillar Built Machines

MID 036 - CID 0273 - FMI 00 Turbo Outlet Pressure above normal 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0275 - FMI 03 Right Turbo Inlet Pressure open/short to +batt 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0275 - FMI 04 Right Turbo Inlet Pressure short to ground 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0275 - FMI 13 Right Turbo Inlet Pressure calibration required 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0276 - FMI 03 Left Turbo Inlet Pressure open/short to +batt 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0276 - FMI 04 Left Turbo Inlet Pressure short to ground 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0273 - FMI 03 Turbo Outlet Pressure open/short to +batt 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0273 - FMI 04 Turbo Outlet Pressure short to ground 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0273 - FMI 13 Turbo Outlet Pressure calibration required 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0276 - FMI 13 Left Turbo Inlet Pressure calibration required 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Turbocharger - Remove - Rear Mounted Turbocharger 3500B Engines
Turbocharger - Install - Rear Mounted Turbocharger 3500B Engines
Turbocharger - Remove - Center Mounted Turbocharger 3500B Engines
Turbocharger - Install - Center Mounted Turbocharger 3500B Engines
Turbocharger - Disassemble 3500B Engines
Turbocharger - Assemble 3500B Engines
Turbocharger - Remove - Rear Mounted Turbocharger 3500B Engines
Turbocharger - Install - Rear Mounted Turbocharger 3500B Engines

Two Strainers are Available to Protect the Bearings in Turbochargers {1052} 2003/01/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052} 2003/03/01
New Gasket for the Turbocharger's Water Lines {1052, 1380} 2003/11/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052} 2004/04/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307} 2006/02/06
New Oil Drain Tube for the Turbocharger {1052, 1307} 2006/01/30

Turbocharger - Inspect SPT343 Truck Mounted Pumper

Instructions for the Service Replacement of the Turbochargers{1052} Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers{1052} Installation Instructions for Turbochargers{1052}
BASIC ENGINE
AIR COMPRESSOR GP

Air Starting Motor - Disassemble 3500B Engines

The Connecting Rod On The Air Compressor Is Now Serviceable {1803} 2002/05/01
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803} 2004/11/01
BELT TIGHTENER GP

Belt Tension Chart 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
CAMSHAFT GP
Camshaft 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Camshaft 3512B and 3512C Engines For Caterpillar Built Machines

Excessive Bearing Wear - Inspect 3512B and 3512C Engines For Caterpillar Built Machines
Camshaft Timing 3512B and 3512C Engines For Caterpillar Built Machines

Camshaft - Remove 3500B Engines
Camshaft - Install 3500B Engines
Camshaft Bearings - Remove 3500B Engines
Camshaft Bearings - Install 3500B Engines

New Cover Seals are Available {1107, 1201, 1210} 2003/05/01
Quality of Remanufactured Camshafts {1210} 2003/07/01
Clarification on the Use of Lubricated Camshaft Thrust Washers {1000, 1210} 2005/04/18
Procedure for Installing the Camshaft Drive Gear {1212} 2005/12/12
COUPLING GP

Driven Equipment - Inspect/Replace/Lubricate SPT343 Truck Mounted Pumper
Driven Equipment - Check SPT343 Truck Mounted Pumper
CRANKSHAFT GP

Crankshaft Wear Sleeves and Seals 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Connecting Rod and Main Bearing Journals 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Crankshaft 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Crankshaft 3512B and 3512C Engines For Caterpillar Built Machines

Main Bearings 3512B and 3512C Engines For Caterpillar Built Machines
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting 3512B and 3512C Engines For Caterpillar Built Machines

Bearing Clearance - Check 3500B Engines
Crankshaft Main Bearings - Remove 3500B Engines
Crankshaft Main Bearings - Install 3500B Engines
Crankshaft - Remove 3500B Engines
Crankshaft - Install 3500B Engines
Crankshaft Rear Seal and Wear Sleeve - Remove 3500B Engines
Crankshaft Front Seal and Wear Sleeve - Remove 3500B Engines
Crankshaft Front Seal and Wear Sleeve - Install 3500B Engines
Crankshaft Rear Seal and Wear Sleeve - Install 3500B Engines

40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202} 2006/01/16

Tightness of Bolted Joints with the Torque Turn Procedure {1101, 1202, 1203, 1218} 2005/04/11
Important Notice on Installation of Crankshaft Seals and Wear Sleeves {1160, 1161} 2013/08/21

Crankshaft Vibration Damper - Inspect SPT343 Truck Mounted Pumper

Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202} Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202}
CYLINDER BLOCK GP

Cylinder Liner 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Connecting Rod 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Piston and Rings - Two-Piece Piston 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Cylinder Block 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Piston and Rings - One-Piece Piston 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Cylinder Block, Liners and Heads 3512B and 3512C Engines For Caterpillar Built Machines

Cylinder Block 3512B and 3512C Engines For Caterpillar Built Machines
Cylinder Liner Projection 3512B and 3512C Engines For Caterpillar Built Machines

Connecting Rod Bearings - Remove and Install 3500B Engines
Piston Cooling Jets - Remove and Install 3500B Engines
Cylinder Liner - Remove 3500B Engines
Cylinder Liner - Install 3500B Engines

Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705} 2004/02/16

New Cylinder Liner {1216} 2003/05/01
The Cylinder Block Has Changed {1201} 2003/10/01
New Liner Seals Are Used and Inserts Are Available for All 3500 Engines {1201} 2010/06/25
A New Top Liner Seal Is Used on 3500 Engines {1201, 7555} 2010/12/16
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {1201, 1216} 2011/07/29
A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555} 2011/09/14

Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555} Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines{1100, 1223} New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines{1100, 1223}

Cylinder Block Pitting Cylinder Block Pitting

REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
CAT REMAN ANNOUNCES THE RELEASE OF REMAN 3500 BARE BLOCKS FOR 3508, 3512, 3516 AND 3524 APPLICATIONS CAT REMAN ANNOUNCES THE RELEASE OF REMAN 3500 BARE BLOCKS FOR 3508, 3512, 3516 AND 3524 APPLICATIONS
CYLINDER HEAD GP

Cylinder Head Valves 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Cylinder Head 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Valve Lash and Valve Bridge Adjustment 3512B and 3512C Engines For Caterpillar Built Machines

Valve Rotocoil or Spring Lock Is Free 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Cylinder Head - Install 3500B Engines
Cylinder Head - Remove 3500B Engines
Cylinder Head - Disassemble 3500B Engines
Cylinder Head - Assemble 3500B Engines

Corrections to Specifications "Cylinder Head Valves" {1100} 2005/03/21

Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290} 1999/07/01
New Water Seals Provide Increased Stability At Higher Temperatures {1100, 1124} 2002/12/01
New Maintenance Intervals for Valve Bridge and Valve Lash Adjustment {1102} 2003/01/01
New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123} 2003/12/01
Procedure for Cylinder Head Bolt Tightening {1100} 2003/12/01
Oversized Valve Guides are Available {1104} 2005/01/31
An Improved Outer Valve Spring is Used {1100, 1108} 2006/01/02
A New Cylinder Head Gasket is Used {1124} 2006/07/24
Use the Correct Parts in the Valve Train {1100} 2007/01/22

Failure of Reused Rotocoils in 3500 Engines{1100} Failure of Reused Rotocoils in 3500 Engines{1100}

Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100} Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
DAMPER GP

Vibration Damper 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Vibration Damper 3512B and 3512C Engines For Caterpillar Built Machines

Vibration Damper - Remove and Install 3500B Engines

REMANUFACTURED DAMPERS FOR THE 3500 AND 3600 ENGINES REMANUFACTURED DAMPERS FOR THE 3500 AND 3600 ENGINES
DRIVE GP-ACCESSORY

Accessory Drive (Upper Right Hand) 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Accessory Drive (Lower Left Hand) 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Accessory Drive (Front) - Disassemble 3500B Engines
Accessory Drive (Front) - Assemble 3500B Engines
Accessory Drive (Front) - Remove 3500B Engines
Accessory Drive (Front) - Install 3500B Engines

Improved Alternator Drive Assemblies, Auxiliary Drive Pulley Groups and Accessory Drive Groups {1151, 1207, 1425} 2003/10/01
DRIVE GP-AUXILIARY
New Seal for the Front Housing {1151, 1207} 2004/06/01
DRIVE GP-FAN
Procedure for Tightening the Locknut for the Fan Drive on 3500 Engines {1359} 2003/04/01
Use The Correct Stub Shaft For The Crankshaft {1237, 1359} 2004/05/01

Fan Drive Bearing - Lubricate SPT343 Truck Mounted Pumper
DRIVE GP-PUMP

Engine Oil and Water Pump Drive - Remove 3500B Engines
Engine Oil and Water Pump Drive - Disassemble 3500B Engines
Engine Oil and Water Pump Drive - Assemble 3500B Engines
Engine Oil and Water Pump Drive - Install 3500B Engines
FLYWHEEL GP

Flywheel 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Flywheel - Inspect 3512B and 3512C Engines For Caterpillar Built Machines

Flywheel - Remove and Install 3500B Engines

Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204} Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
GEAR GP

Gear Group (Front) 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Gear Group (Rear) 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Gear Group (Rear) - Remove 3500B Engines
Gear Group (Rear) - Install 3500B Engines

Replace the Gear when the Sleeve Bearing is Replaced {1212, 1234} 2005/04/18
A New Oil Pump Adapter Assembly is Used {1206, 1313} 2005/10/31

Machining of Replacement Sleeve Bearings{1206, 1212, 1234} Machining of Replacement Sleeve Bearings{1206, 1212, 1234}
HOUSING GP-FLYWHEEL

Flywheel Housing Cover 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Flywheel Housing 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Flywheel Housing - Inspect 3512B and 3512C Engines For Caterpillar Built Machines

Flywheel Housing - Remove 3500B Engines
Flywheel Housing - Install 3500B Engines

Sealing and Installing the Flywheel Housing {1157, 7555} 2006/03/27
HOUSING GP-FRONT

Housing (Front) 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Front Drive Housing - Remove and Install 3500B Engines

New Seals for the Front Housing {1151, 1207} 2003/10/01
New Seal for the Front Housing {1151} 2003/11/01
MOUNTING GP-ALTERNATOR

Two New Tools Check Tension on Engine Belts {0701, 0767} 2004/05/03

Improved Alternator Adjusting Rod {1405} 2005/03/07
A New Alternator Drive Pulley with an Improved Wear Sleeve is Used {1154, 1405, 1425} 2007/06/04
MOUNTING GP-ENGINE

Engine Trunnion 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Engine Mounts - Check SPT343 Truck Mounted Pumper
PAN GP-OIL

Engine Oil Pan 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Engine Oil Pan - Remove 3500B Engines
Engine Oil Pan - Disassemble 3500B Engines
Engine Oil Pan - Assemble 3500B Engines
Engine Oil Pan - Install 3500B Engines

New Oil Pans {1302} 2003/10/01

Oil Pan Cracking Oil Pan Cracking
PISTON & ROD GP

Engine Oil Cooler Bypass and Cooling Jet Sequence Valves 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Pistons, Rings and Connecting Rods - Two-Piece Piston 3512B and 3512C Engines For Caterpillar Built Machines

Connecting Rod Bearings 3512B and 3512C Engines For Caterpillar Built Machines

Pistons and Connecting Rods - Remove 3500B Engines
Pistons and Connecting Rods - Install 3500B Engines

A New Top Piston Ring Promotes Reduced Cylinder Liner Wear {1214, 1215} 2002/12/01
Use the Correct Tooling for Installing Piston Rings {1214, 1215} 2003/03/01
New Fabricated Tool for Piston Pin Installation {1225} 2003/08/01
Introduction of New Pistons and Remanufactured Cylinder Packs {1214, 1239} 2006/06/26
Some Pistons and Cylinder Packs are Cancelled and Replaced {1214} 2006/06/26
The Piston Pin Retainer Is Now Marked for Correct Orientation {1214} 2004/02/01
A Parts Kit for the Piston Cooling Jets and Retainers for the Piston Cooling Jets is Now Cancelled {1331} 2004/06/01
The Piston Pin Retainer is Now Marked for Correct Orientation {1214} 2004/03/01
A New Piston Pin Retainer is Used {1214} 2004/06/01
New Piston and Rod Group {1225} 2006/06/26
New Procedure for Measuring the Connecting Rod {1218, 1225} 2006/08/14
New Piston Assemblies Are Used {1225} 2008/07/14

Install the Correct Piston Cooling Jet and the Correct Retainer for the One-Piece Piston{1214, 1331} Install the Correct Piston Cooling Jet and the Correct Retainer for the One-Piece Piston{1214, 1331}

Information that is required to understanding and the determining of the root cause of a piston pin joint failure Information that is required to understanding and the determining of the root cause of a piston pin joint failure
Some 3500 Cylinder Packs May Have Incorrect Pistons{1225} Some 3500 Cylinder Packs May Have Incorrect Pistons{1225}
Do Not Use Unapproved Connecting Rod 7N-2405 Bolts for 3500 and G3500 Engines{1225, 7553} Do Not Use Unapproved Connecting Rod 7N-2405 Bolts for 3500 and G3500 Engines{1225, 7553}
SHAFT GP-STUB

The Torque Has Been Increased For The Bolts That Fasten The Stub Shafts To The Engine Cylinder Block {1237} 2002/05/01
SERPENTINE/V-BELTS
An Improved Alternator Belt is Used {1357} 2003/10/01
A New Special Instruction, REHS2259 , "Fabricated Tool for Alternate Method of Tightening Fan Drive Belts" is Available {1357, 1397} 2004/06/01
A Improved Alternator Guard in Used {7174} 2006/08/21

Belts - Inspect/Adjust/Replace SPT343 Truck Mounted Pumper

Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397} Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397}
VALVE MECHANISM GP

Fuel Injector Mechanism 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Valve Mechanism 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Valve Mechanism 3512B and 3512C Engines For Caterpillar Built Machines
Fuel Injector Mechanism 3512B and 3512C Engines For Caterpillar Built Machines

Finding the Top Center Position for the No. 1 Piston 3512B and 3512C Engines For Caterpillar Built Machines

Rocker Shaft - Disassemble 3500B Engines
Rocker Shaft - Assemble 3500B Engines
Rocker Shaft and Push Rods - Remove 3500B Engines
Rocker Shaft and Push Rods - Install 3500B Engines
Valve Cover - Remove and Install 3500B Engines
Valve Cover Base - Remove and Install 3500B Engines

New Tools Are Available To Help Find The Top Center Position For No. 1 Piston {1105} 2001/11/19

Addition to Specifications "Valve Mechanism" {1123} 2005/02/28
A Pin for the Rocker Shaft Is Now Available for Parts Service {1102} 2003/08/01
New Rocker Arm Improves Lubrication {1123} 2003/09/01
A New Dowel Improves Lubrication to the Rocker Assembly {1123, 1123} 2003/12/01
Engines Are Now Built with Semi-Crowned Lifter Rollers {1209} 2004/07/01
An Improved Rocker Arm Base and an Improved Seal for the Rocker Arm Base are Now Used {1123, 1123} 2004/09/01
Improved Lifters are Now Used {1102, 1121, 1123} 2005/01/31
New Sleeve Bearing in the Rocker Arm {1123} 2005/02/28
An Improved Lifter Is Used for 3500 Engines with Mechanical Unit Injectors {1102, 1121, 1123} 2011/03/09
A New Valve Lifter Assembly Is Used in 3500B and 3500C Engines {1209} 2012/10/30

Engine Valve Lash - Inspect/Adjust SPT343 Truck Mounted Pumper
BRAKING SYSTEM
ACCUMULATOR GP

Accumulator Discharging and Charging Procedures{0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474} Accumulator Discharging and Charging Procedures{0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
BRAKE GP

Procedure to Salvage Tang Slots on Transmission and Brake Pistons{0679, 3160, 4011, 4251} Procedure to Salvage Tang Slots on Transmission and Brake Pistons{0679, 3160, 4011, 4251}
COOLING SYSTEM
COOLER GP

Engine Oil Cooler - Disassemble 3500B Engines
Engine Oil Cooler - Assemble 3500B Engines
Engine Oil Cooler - Remove 3500B Engines
Engine Oil Cooler - Install 3500B Engines
Engine Oil Filter Base - Disassemble - Spin-on Filters 3500B Engines
Engine Oil Filter Base - Assemble - Spin-on Filters 3500B Engines

100% Leak Testing of Oil Coolers {1378} 2007/04/30
FAN GP

Fan - Remove and Install 3500B Engines
LINES GP-TURBOCHARGER WATER

A New Hose Assembly Replaces A Tube Assembly In The Water Lines Groups For The Turbochargers {1380} 2001/09/01
LINES GP-WATER
New Gaskets in the Water Lines Groups {1380} 2003/12/01
An Updated Gasket for the Water Temperature Regulator Housing is Available {1355, 1380, 1393} 2006/11/27

Proper Installation of Braided Steel Hoses{7554} Proper Installation of Braided Steel Hoses{7554}
PUMP GP-WATER

Water Pump 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Auxiliary Water Pump 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Water Pump - Disassemble 3500B Engines
Water Pump - Assemble 3500B Engines
Water Pump - Remove 3500B Engines
Water Pump (Separate Circuit Aftercooler) - Remove 3500B Engines
Water Pump (Separate Circuit Aftercooler) - Install 3500B Engines
Water Pump (Separate Circuit Aftercooler) - Disassemble 3500B Engines
Water Pump (Separate Circuit Aftercooler) - Assemble 3500B Engines
Auxiliary Water Pump - Remove - Auxiliary Sea Water Pump 3500B Engines
Auxiliary Water Pump - Install - Auxiliary Sea Water Pump 3500B Engines
Auxiliary Water Pump - Disassemble - Auxiliary Sea Water Pump 3500B Engines
Auxiliary Water Pump - Assemble - Auxiliary Sea Water Pump 3500B Engines
Water Pump - Install 3500B Engines
Auxiliary Water Pump - Disassemble - Auxiliary Pump (Type 1) 3500B Engines
Auxiliary Water Pump - Remove - Auxiliary Pump 3500B Engines
Auxiliary Water Pump - Install - Auxiliary Pump 3500B Engines
Auxiliary Water Pump - Assemble - Auxiliary Pump (Type 1) 3500B Engines
Auxiliary Water Pump - Disassemble - Auxiliary Pump (Type 2) 3500B Engines
Auxiliary Water Pump - Assemble - Auxiliary Pump (Type 2) 3500B Engines

New Water Pumps for 3500 Engines {1361, 1389} 2003/02/01
Improved Water Pump Seal {1361} 2003/10/01
Improved Auxiliary Water Pumps are Used {1361, 1371} 2007/01/22

Water Pump - Inspect SPT343 Truck Mounted Pumper

Use Proper Handling During Shipment and Installation of the Water Pumps{1361} Use Proper Handling During Shipment and Installation of the Water Pumps{1361}

0R2815, 0R2857, 0R2858, And 0R4574 Remanufactured Water Pumps Need To Be Removed From Dealer Parts Stock 0R2815, 0R2857, 0R2858, And 0R4574 Remanufactured Water Pumps Need To Be Removed From Dealer Parts Stock
The Impeller Retaining Nut Needs To Be Replaced On Certain 0R9670, 0R9671, 0R9672, And 0R9673 Remanufactured Water Pumps In Dealer Parts Stock The Impeller Retaining Nut Needs To Be Replaced On Certain 0R9670, 0R9671, 0R9672, And 0R9673 Remanufactured Water Pumps In Dealer Parts Stock
RADIATOR GP

Expansion Tank - Remove and Install 3500B Engines
Radiator Group - Remove 3500B Engines
Radiator Group - Install 3500B Engines
Radiator Core - Remove 3500B Engines
Radiator Core - Install 3500B Engines

A New Kit for the Cooling System Pressure Cap is Available {1353, 1354, 1382, 1392, 7405} 2006/08/07

Radiator - Clean SPT343 Truck Mounted Pumper
REGULATOR GP-TEMPERATURE

Water Temperature Regulator 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Water Temperature Regulators - Remove 3500B Engines
Water Temperature Regulators - Install 3500B Engines

Cooling System Water Temperature Regulator - Replace SPT343 Truck Mounted Pumper
TANK GP-EXPANSION

New Expansion Tank Assembly {1354} 2003/11/01
VALVE GP-COOLER BYPASS

Engine Oil Pressure is High 3512B and 3512C Engines For Caterpillar Built Machines
ELECTRICAL AND STARTING SYSTEM
ALARM GP

Alarms and Shutoffs SPT343 Truck Mounted Pumper
Monitoring System SPT343 Truck Mounted Pumper
ALTERNATOR GP-CHARGING

Alternator Mounting 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Alternator and Regulator 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Alternator 26SI Series Alternator

General Information 26SI Series Alternator
Component Description 26SI Series Alternator
Normal Operation 26SI Series Alternator
Alternator 3512B and 3512C Engines For Caterpillar Built Machines

T1 Alternator Output - Test 26SI Series Alternator
T2 Electrical System Current - Test 26SI Series Alternator
T3 Charging System - Test 26SI Series Alternator
T4 Alternator Drive System - Check 26SI Series Alternator
T5 Alternator Current - Test 26SI Series Alternator
T6 Residual Magnetism Restoration 26SI Series Alternator
T7 Identifying Source of Current Draw - Test 26SI Series Alternator
T8 Alternator Overcharging - Test 26SI Series Alternator
Initial Troubleshooting Procedure 26SI Series Alternator
General Information 26SI Series Alternator
Component - Test 26SI Series Alternator
Alternator Regulator 3512B and 3512C Engines For Caterpillar Built Machines

Alternator - Remove and Install 3500B Engines
Alternator - Assemble 26SI Series Alternator
Alternator - Disassemble 26SI Series Alternator

Correction to Service Magazine, SEPD0544, "Repair Parts Available for Alternator R-Terminal" {1405} 2000/12/18

Improved Design for the Alternator Guard Assembly {7168} 2005/05/30

Alternator - Inspect SPT343 Truck Mounted Pumper

Charging System Troubleshooting{1406} Charging System Troubleshooting{1406}
BATTERY GP

Battery 3512B and 3512C Engines For Caterpillar Built Machines

MID 036 - CID 0168 - FMI 00 System Voltage High 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Electrical Power Supply 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Batteries - Replace SPT343 Truck Mounted Pumper
CIRCUIT BREAKER GP

Circuit Breaker 3512B and 3512C Engines For Caterpillar Built Machines
CONTROL GP-ELECTRONIC

Electronic Control Module (Engine) - Remove and Install 3500B Engines
ELECTRONICS GP-ENGINE

Cold Cylinder Cutout 3512B and 3512C Engines For Caterpillar Built Machines
Electronic Control System Operation 3512B and 3512C Engines For Caterpillar Built Machines
Cat Data Link 3512B and 3512C Engines For Caterpillar Built Machines
Histogramming 3512B and 3512C Engines For Caterpillar Built Machines
100 Hour Free Configuration on Engine Start-up 3512B and 3512C Engines For Caterpillar Built Machines
Load Feedback Capability 3512B and 3512C Engines For Caterpillar Built Machines
Engine Monitoring System 3512B and 3512C Engines For Caterpillar Built Machines
System Configuration Parameters 3512B and 3512C Engines For Caterpillar Built Machines
Electronic Control Module (ECM) 3512B and 3512C Engines For Caterpillar Built Machines

General Information (Electronic Control System) 3512B and 3512C Engines For Caterpillar Built Machines
Calibration 3512B and 3512C Engines For Caterpillar Built Machines
Monitoring System Parameters 3512B and 3512C Engines For Caterpillar Built Machines

ECM Will Not Communicate with Other Systems or Display Modules 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Excessive White Smoke 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Too Much Vibration 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Too Much Valve Lash 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Oil Contains Coolant 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Low Engine Oil Pressure 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E190 Engine Overspeed Warning 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Self-Diagnostics 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0248 - FMI 09 Cat Data Link not communicating 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0253 - FMI 02 Personality Module mismatch 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0254 - FMI 12 Electronic Control Module Error 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0268 - FMI 02 Check Programmable Parameters 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0094 - FMI 02 Fuel Pressure misinstalled 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Poor Fuel Consumption 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Engine Stalls at Low RPM 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Noise Coming from Cylinder 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Mechanical Noise (Knock) in Engine 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Excessive Engine Oil Consumption 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Programming Parameters 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
System Configuration Parameters 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Engine Monitoring System - Programmable 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Engine Overspeeds on Start-up 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Intermittent Low Power or Power Cutout 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Low Power/Poor or No Response to Throttle 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Engine Cranks but Will Not Start 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Can Not Reach Top Engine RPM 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Engine Has Early Wear 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
ECM/Personality Module 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Factory Passwords Worksheet 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0094 - FMI 03 Fuel Pressure open/short to +batt 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0094 - FMI 04 Fuel Pressure short to ground 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0094 - FMI 13 Fuel Pressure calibration required 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0337 - FMI 02 Incorrect Remote E-Stop Switch inputs 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Factory Passwords 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Customer Parameters Worksheet 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Diagnostic Codes 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0336 - FMI 02 Incorrect ECS Switch inputs 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Excessive Black Smoke 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Fuel Dilution of Engine Oil 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Flash Programming 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Replacing the ECM 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Electronic Service Tool Will Not Communicate with ECM 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Intermittent Engine Shutdown 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Electronic Display Module 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E007 High Aftercooler Temperature Derate 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E008 High Aftercooler Temperature Shutdown 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E009 High Altitude Derate 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E012 High Crankcase Pressure Derate 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E013 High Crankcase Pressure Shutdown 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E015 High Engine Coolant Temperature Derate 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E016 High Engine Coolant Temperature Shutdown 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E017 High Engine Coolant Temperature Warning 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E021 High Exhaust Temperature Derate 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E031 Air Inlet Restriction Derate 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E043 Low System Voltage Warning 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E095 Fuel Filter Restriction Warning 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E099 Engine Oil Filter Restriction Warning 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E173 High Exhaust Temperature Warning 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E272 Inlet Air Restriction Warning 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E279 High Aftercooler Temperature Warning 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E040 Low Engine Oil Pressure Shutdown 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E038 Low Engine Coolant Temperature Warning 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E085 Engine Shutdown Overridden 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E097 Engine Derate Overridden 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Event Codes 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Analog Sensor Supply 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Emergency Kill Switch 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Speed Control 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Starting Motor System 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
CAT Data Link 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
System Overview 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Engine Misfires, Runs Rough or Is Unstable 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Engine Will Not Crank 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E100 Low Engine Oil Pressure Warning 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E004 Engine Overspeed Shutdown 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Electronic Service Tools 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
ECM Will Not Accept Factory Passwords 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Inspecting Electrical Connectors 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
E101 High Crankcase Pressure Warning 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Symptoms 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Wireless Communication Adapter Allows Radio Frequency Communication Between Computer and Electronic Control Module {0785, 0788} 2005/03/01

New Service Information Tool for CAT Dealers is Now Available {1000} 2002/06/01
Finding the Latest Flash Files {7620} 2005/02/28

Engine Protective Devices - Check SPT343 Truck Mounted Pumper
Programmable System Parameters SPT343 Truck Mounted Pumper
Gauges and Indicators SPT343 Truck Mounted Pumper

Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control{1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610} Diagnostic Code Information for Caterpillar ® Electronic Control{1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}

PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN 3512B ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN 3512B ENGINES
IGNITION GP

Timing Light Group Helps Adjust Timing for Spark Ignited Engines {0712, 0785} 2004/04/01
INDICATOR GP

Indicators for Engine Oil Pressure 3512B and 3512C Engines For Caterpillar Built Machines
JUNCTION BOX GP

Junction Box SPT343 Truck Mounted Pumper
MAGNETIC PICKUP GP

Engine Speed Sensor 3512B and 3512C Engines For Caterpillar Built Machines
SENSOR GP

Fuel Pressure Sensor 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Crankcase Pressure Sensor 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Atmospheric Pressure Sensor 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Engine Oil Pressure Sensor 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Engine Speed/Timing Sensor 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Engine Speed Sensor 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

MID 036 - CID 0342 - FMI 08 Secondary Engine Speed signal abnormal 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0342 - FMI 02 Loss of Secondary Engine Speed signal 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0101 - FMI 03 Crankcase Pressure open/short to +batt 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0101 - FMI 04 Crankcase Pressure short to ground 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0262 - FMI 04 5 Volt Sensor DC Power Supply short to ground 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0262 - FMI 03 5 Volt Sensor DC Power Supply short to +batt 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0263 - FMI 03 Digital Sensor Supply short to +batt 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0263 - FMI 04 Digital Sensor Supply short to ground 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0274 - FMI 04 Atmospheric Pressure short to ground 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0274 - FMI 13 Atmospheric Pressure calibration required 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0827 - FMI 08 Left Exhaust Temperature signal abnormal 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0261 - FMI 13 Engine Timing calibration required 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0289 - FMI 03 Unfiltered Fuel Pressure open/short to +batt 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0289 - FMI 13 Unfiltered Fuel Pressure calibration required 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0101 - FMI 13 Crankcase Pressure calibration required 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0110 - FMI 03 Engine Coolant Temperature open/short to +batt 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0110 - FMI 04 Engine Coolant Temperature short to ground 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0168 - FMI 01 System Voltage Low 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0168 - FMI 02 System Voltage intermittent/erratic 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0274 - FMI 03 Atmospheric Pressure open/short to +batt 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0542 - FMI 04 Unfiltered Engine Oil Pressure short to ground 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0542 - FMI 13 Unfiltered Engine Oil Pressure cal required 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0100 - FMI 13 Engine Oil Pressure calibration required 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0100 - FMI 03 Engine Oil Pressure open/short to +batt 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0100 - FMI 04 Engine Oil Pressure short to ground 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0542 - FMI 02 Unfiltered Engine Oil Pressure misinstalled 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0827 - FMI 03 Left Exhaust Temperature open/short to +batt 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0827 - FMI 04 Left Exhaust Temperature short to ground 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0190 - FMI 02 Loss of Engine Speed signal 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0190 - FMI 03 Engine Speed open/short to +batt 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0190 - FMI 08 Engine Speed signal abnormal 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0342 - FMI 03 Secondary Engine Speed open/short to +batt 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0277 - FMI 08 Timing Calibration signal abnormal 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0091 - FMI 08 Throttle Position signal abnormal 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0289 - FMI 04 Unfiltered Fuel Pressure short to ground 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0542 - FMI 03 Unfiltered Engine Oil Pressure open/short to +batt 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0828 - FMI 03 Right Exhaust Temperature open/short to +batt 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0828 - FMI 04 Right Exhaust Temperature short to ground 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Analog Sensor - Calibrate 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Engine Speed/Timing Sensor - Calibrate 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0100 - FMI 02 Engine Oil Pressure out of range 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0289 - FMI 02 Unfiltered Fuel Pressure misinstalled 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0190 - FMI 07 Primary Speed Sensor misinstalled 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0342 - FMI 07 Secondary Speed Sensor misinstalled 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0828 - FMI 08 Right Exhaust Temperature signal abnormal 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Engine Speed/Timing Sensor 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Permanent Timing Calibration Sensor 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Digital Sensor Supply 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Engine Sensor Open/Short Test 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

A New Speed-Timing Sensor Is Available {1912} 2006/07/24
New Exhaust Temperature Sensors Are Now Available {1919} 2006/12/04

Engine Speed/Timing Sensor - Clean/Inspect SPT343 Truck Mounted Pumper
SOLENOID GP

Injector Solenoids 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
STARTING AID GP

Ether Control System 3512B and 3512C Engines For Caterpillar Built Machines

MID 036 - CID 0545 - FMI 06 Ether Start Relay short to ground 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0545 - FMI 05 Ether Start Relay open/short to +batt 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Ether Injection System 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
STARTING MOTOR GP

Hydraulic Starting System 3512B and 3512C Engines For Caterpillar Built Machines

Electric Starting Motor - Remove and Install 3500B Engines
Air Starting Motor - Remove 3500B Engines
Air Starting Motor - Install 3500B Engines
Air Starting Motor - Assemble 3500B Engines

Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469} Caterpillar PRELUB® Diagnostics{1469}
SWITCH GP

Deck Start/Run/Kill Switch 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Improved Procedure for Verifying the Operation of the Battery Disconnect System. {1411} 2009/05/04
TOOLS

2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is now available {0785} 2002/08/01
Different Wire Removal Tool and Different Wire Installation Tool Are Required for 85 Pin Connectors on Engine Wiring Harnesses {0709} 2005/01/31
WIRING GP

Electrical Connectors and Functions 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408} 2000/06/26
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553} 2000/10/09

Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408} 2000/07/01

Cross-Reference for Electrical Connectors{7553} Cross-Reference for Electrical Connectors{7553}
RELAY GP

MID 036 - CID 0444 - FMI 05 Start Relay open circuit 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0444 - FMI 06 Start Relay short to ground 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
ELECTRONICS GP-COMMUNICATION

New Version of Product Link Available {7602} 2001/08/27
New Flash File Software Is Used for Product Link 151/201 {7606, 7620} 2002/07/15

Installation Instructions For Product Link 101 Inline Timer{7602} Installation Instructions For Product Link 101 Inline Timer{7602}
ENGINE ARRANGEMENT
ENGINE AR

Engine Design 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Engine Rotation 3512B and 3512C Engines For Caterpillar Built Machines

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000} 2001/01/08
Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000} 2002/01/21
A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000} 2002/03/25

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000} 2002/02/01
Parts Manuals For The Following Products Are Now Provided On A CD-ROM {7000, 7002} 2002/02/01
WEB Sites Are Available On The Internet For Products That Are Manufactured At The Large Engine Center {1000} 2002/03/01
A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000} 2002/04/01
Responsibilities for Emission Certified Engines {1000} 2005/10/03
Storage Procedures Exist for Caterpillar Products {1000, 7000} 2008/12/08
Proper Storage Procedures for Commercial Engines {0355, 1000} 2009/12/03

Welding on Engines with Electronic Controls SPT343 Truck Mounted Pumper

Procedure for Cleaning an Engine that is Saturated with Water{1000} Procedure for Cleaning an Engine that is Saturated with Water{1000}
MISCELLANEOUS INFORMATION

Insulation on Exhaust Components {1000} 2006/03/06

Emissions Warranty Information SPT343 Truck Mounted Pumper
TOOLS

Using Lock-N-Stitch Procedures for Casting Repair{0676, 0685} Using Lock-N-Stitch Procedures for Casting Repair{0676, 0685}
FUEL SYSTEM
CONTROL GP-FUEL INJECTION

A Stronger Lever Assembly Is Used In The Fuel Injection Control Groups {1298} 2002/06/01
FILTER GP-FUEL

Fuel Filter Base 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Fuel Filter Housing - Remove - Spin-on Filter 3500B Engines
Fuel Filter Housing - Remove 3500B Engines
Fuel Filter Housing - Disassemble - Spin-on Filters 3500B Engines
Fuel Filter Housing - Assemble - Spin-on Filters 3500B Engines
Fuel Filter Housing - Install - Spin-on Filters 3500B Engines
Fuel Filter Housing - Install 3500B Engines
Fuel Filter Housing - Remove 3500B Engines
Fuel Filter Housing - Install 3500B Engines

Fuel System Secondary Filter - Replace SPT343 Truck Mounted Pumper
Fuel System Fuel Filter Differential Pressure - Check SPT343 Truck Mounted Pumper
Fuel System Primary Filter/Water Separator - Drain SPT343 Truck Mounted Pumper
Fuel System Primary Filter (Water Separator) Element - Replace SPT343 Truck Mounted Pumper
Fuel Filter (Engine Coolant Heater) - Replace SPT343 Truck Mounted Pumper
FUEL SYSTEM GP

Fuel Inlet Screens are Removed from Remanufactured Fuel Injectors {1250, 1252} 2003/06/01
LINES GP-FUEL
A New Fuel Shield is Available {1252} 2005/03/28
Use Care During Disassembly of the Fuel Manifolds {1252, 1274} 2007/10/22

Fuel Dilution Of The Oil In 3500B Engines Fuel Dilution Of The Oil In 3500B Engines
LINES GP-FUEL INJECTION

Fuel Pressure Regulator 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Improved Fuel Injectors {1251, 1254, 1290} 2004/09/01
New Injector Seals are Now Used {1290} 2005/01/31

Worksheet for the Diagnosis of Fuel Injectors{1254, 1290} Worksheet for the Diagnosis of Fuel Injectors{1254, 1290}
PUMP GP-FUEL INJECTION

Fuel Injector 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Fuel Injector 3512B and 3512C Engines For Caterpillar Built Machines

Checking Engine Cylinders with an Electronic Service Tool 3512B and 3512C Engines For Caterpillar Built Machines
Fuel Injector Trim Code 3512B and 3512C Engines For Caterpillar Built Machines
Fuel Injector Adjustment 3512B and 3512C Engines For Caterpillar Built Machines
Checking Engine Cylinders 3512B and 3512C Engines For Caterpillar Built Machines

MID 036 - CID 0001 - FMI 05 Injector Cylinder 1 open circuit 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0001 - FMI 06 Injector Cylinder 1 short 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0002 - FMI 05 Injector Cylinder 2 open circuit 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0002 - FMI 06 Injector Cylinder 2 short 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0003 - FMI 05 Injector Cylinder 3 open circuit 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0003 - FMI 06 Injector Cylinder 3 short 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0004 - FMI 05 Injector Cylinder 4 open circuit 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0004 - FMI 06 Injector Cylinder 4 short 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0005 - FMI 05 Injector Cylinder 5 open circuit 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0005 - FMI 06 Injector Cylinder 5 short 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0006 - FMI 05 Injector Cylinder 6 open circuit 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0006 - FMI 06 Injector Cylinder 6 short 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0007 - FMI 05 Injector Cylinder 7 open circuit 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0007 - FMI 06 Injector Cylinder 7 short 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0008 - FMI 05 Injector Cylinder 8 open circuit 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0008 - FMI 06 Injector Cylinder 8 short 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0009 - FMI 06 Injector Cylinder 9 short 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0009 - FMI 05 Injector Cylinder 9 open circuit 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0010 - FMI 05 Injector Cylinder 10 open circuit 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0010 - FMI 06 Injector Cylinder 10 short 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0011 - FMI 05 Injector Cylinder 11 open circuit 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0011 - FMI 06 Injector Cylinder 11 short 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0012 - FMI 05 Injector Cylinder 12 open circuit 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
MID 036 - CID 0012 - FMI 06 Injector Cylinder 12 short 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Electronic Unit Injector - Install 3500B Engines
Electronic Unit Injector - Remove 3500B Engines

Service Life of Unit Injectors {1251, 1290} 2007/01/01

Fuel Injector - Inspect/Adjust SPT343 Truck Mounted Pumper

Some Remanufactured Fuel Injectors May Cause Fuel Dilution of Engine Oil{1251, 1290} Some Remanufactured Fuel Injectors May Cause Fuel Dilution of Engine Oil{1251, 1290}
PUMP GP-FUEL PRIMING

Fuel Priming Pump - Remove and Install 3500B Engines

Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258} 2004/03/29

Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258} Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
PUMP GP-FUEL TRANSFER

Fuel Transfer Pump 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Fuel Transfer Pump - Remove 3500B Engines
Fuel Transfer Pump - Disassemble 3500B Engines
Fuel Transfer Pump - Assemble 3500B Engines
Fuel Transfer Pump - Install 3500B Engines

A New Fuel Transfer Pump Group Is Used {1256} 2002/11/01
A New Fuel Transfer Pump is Used {1256} 2004/10/01
New Fuel Transfer Pump {1256} 2008/03/03
TOOLS

9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706} 9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
COOLER GP

Fuel Cooler - Remove and Install 3500B Engines
HYDRAULIC SYSTEM
CYLINDER GP

Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562} Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
LINES GP

New Protective Caps For Hose Clamps Are Now Available {5057} 2001/11/19
LUBRICATION SYSTEM
BREATHER GP

Crankcase Breather 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Crankcase Breather - Remove and Install 3500B Engines

A New High-Temperature Tee Hose Is Available for Crankcase Breathers on 3500, G3500, 3600, G3600, and C280 Engines {1317} 2012/10/01

Engine Crankcase Breather - Clean SPT343 Truck Mounted Pumper
FILTER GP-ENGINE OIL

Engine Oil Filter Base 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Engine Oil Filter Housing - Disassemble 3500B Engines
Engine Oil Filter Housing - Assemble 3500B Engines
Engine Oil Filter Housing - Remove 3500B Engines
Engine Oil Filter Housing - Install 3500B Engines
Engine Oil Filter Base - Remove - Spin-on Filters 3500B Engines
Engine Oil Filter Base - Install - Spin-on Filters 3500B Engines

A New Oil Filter Housing Assembly Is Used In The Oil Filter Groups {1306} 2002/06/01
Use The 2P-4005 Engine Oil Filter Assembly If The Engine Is Equipped With Spin-on Oil Filters {1308} 2002/06/01
An Improved Spin-On Oil Filter Is Now Available {1306, 1308} 2003/07/01
Install the Spin-On Engine Oil Filter Properly {1308} 2003/09/01
Improved Spin-On Engine Oil Filters are Used {1308} 2005/08/15

Engine Oil and Filter - Change SPT343 Truck Mounted Pumper
Engine Oil Filter Differential Pressure - Check SPT343 Truck Mounted Pumper
PUMP GP-ENGINE OIL

Engine Oil Pump 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Engine Oil Pump - Remove 3500B Engines
Engine Oil Pump - Disassemble 3500B Engines
Engine Oil Pump - Assemble 3500B Engines
Engine Oil Pump - Install 3500B Engines
Engine Oil Scavenge Pump - Remove 3500B Engines
Engine Oil Scavenge Pump - Disassemble 3500B Engines
Engine Oil Scavenge Pump - Assemble 3500B Engines

Oversized Bearings are Available for Reconditioning of Remanufactured Engine Oil Pumps and Scavenge Oil Pumps {1304, 1312} 2003/09/01
New Bearings for the Engine Oil Pump are Available {1304} 2005/01/17
PUMP GP-SCAVENGE

Engine Oil Scavenge Pump 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Engine Oil Scavenge Pump - Install 3500B Engines

Make Sure to Clean the Shaft for the Engine Oil Scavenge Pump's Gear {1312} 2005/09/12
REGULATOR GP-OIL LEVEL
The Routing Has Been Changed For The New Vent Line In The Oil Level Regulator Groups {1334} 2002/08/01
VALVE GP

Engine Oil Sequence Valves - Remove and Install 3500B Engines
VALVE GP-FLUID SAMPLING

Engine Oil Sample - Obtain SPT343 Truck Mounted Pumper
OPERATOR STATION
AIR CONDITIONER GP

New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342} 2002/07/08
CONSOLE GP

Universal Remote Control Console SPT343 Truck Mounted Pumper
MONITOR GP

Installation and Operation of the Caterpillar Messenger Driver Information Display{7490} Installation and Operation of the Caterpillar Messenger Driver Information Display{7490}
PANEL GP

Control Module (Pump Pressure) - Calibrate 3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Control Module (Pump Rate and Engine Rate) - Calibrate 3512B Engine for SPF343, SPS343, and SPT343 Pumpers

Instrument Panel - Inspect SPT343 Truck Mounted Pumper
RADIO GP

New 12 Volt AM/FM Radios Are Available {7338} 2000/03/20
TACHOMETER GP
New Electronic Tachometers Have Different Connection To Wiring Harness {7462} 2001/07/16
POWER TRAIN
AXLE GP

Specifications for Inspection of Driveline Fasteners{3030, 3101, 3159, 3253, 3258, 3278, 4050} Specifications for Inspection of Driveline Fasteners{3030, 3101, 3159, 3253, 3258, 3278, 4050}
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMS

Service Charts and Decals Available {0374, 0375, 7405, 7557} 2000/03/06

Installation of the 225-4256 Film {7405, 7557} Installation of the 225-4256 Film {7405, 7557}
GASKET & SEAL KITS

Improvements to Caterpillar's Gasket Kits for Engines {7555} 2001/01/15
HARDWARE & SEALANTS

Inspection of Steel Braided Hoses with Reusable Connectors {7553, 7554} 2008/01/21
LITERATURE GP

The Current Special Publication, PECP9067, "One Safe Source" Is Now Available Through The Internet {0374} 2002/05/13
Announcing the Combination of Groups Within the Paper Copies of the Caterpillar Parts Manuals {0374} 2002/06/03

The Current Special Publication, PECP9067, "One Safe Source" Is Now Available Through The Internet {0374} 2002/05/01
The Contents Of The Service Manuals For All Commercial Engines Is Available On The Caterpillar Intranet {1000} 2002/12/01

Caterpillar Service Welding Guide{0599, 0677, 0678, 0679} Caterpillar Service Welding Guide{0599, 0677, 0678, 0679}
LUBRICANTS & FLUIDS

A New Edition of the Special Publication, SEBD0640, "Oil and Your Engine" is Available {1348} 2001/11/19

A Dye is Now Added to the Engine Oil at the Factory {1348} 2007/06/04

Do Not Use Loctite Moly Paste 51049 on Critical Fasteners{0645} Do Not Use Loctite Moly Paste 51049 on Critical Fasteners{0645}
MISCELLANEOUS INFORMATION

Service Information System Product Structure Link Change for Service Letters that Address Parts Stock Distribution {1000, 7000, 7750} 2001/08/20
Correction to Service Magazine , "Use the Technical Information Feedback Systems" {0374} 2001/12/03

The Product Structure Link In The Service Information System (SIS) Has Been Changed For Service Letters That Address Parts Stock Distribution {1000, 7750} 2001/08/01

The Product Structure Link In The Service Information System (SIS) Has Been Changed For Service Letters That Address Parts Stock Distribution {1000, 7750} 2001/09/01
PARTS STOCK, ORDERING & RETURN

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK
TOOLS

New Hydraulic Wrenches and Pumps {0602, 0615} 2000/06/05

Hoses and Clamps - Inspect/Replace SPT343 Truck Mounted Pumper

Engine Component Racks Engine Component Racks
Engine Stands Engine Stands
WARRANTY

Provide Proper Documentation of Returned Parts within the Warranty Claim {1000} 2007/09/10
KIT-REBUILD
Top End and Major Engine Overhaul Foundational Kits Are Available for 3512 Petroleum Engines {1000} 2013/10/31

440-1752 Top End Engine Overhaul Foundational Kit for 3512B Engines{1000} 440-1752 Top End Engine Overhaul Foundational Kit for 3512B Engines{1000}
440-1753 Major Engine Overhaul Foundational Kit for 3512B Engines{1000} 440-1753 Major Engine Overhaul Foundational Kit for 3512B Engines{1000}
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
Installation and Removal Of The Mechanically Attached Wear Plate System Installation and Removal Of The Mechanically Attached Wear Plate System





You can buy on Amazon: .

$4.47
20-04-2018
CATERPILLAR CAP SCREW ZINC 7X2543 NEW

  7X2543
$32.71
20-04-2018
CATERPILLAR ARM AS- 1468147 NEW

  1468147
$2,063.16
20-04-2018
CATERPILLAR CYLINDER G 9T2472 NEW

  9T2472


Parts best sale:

New USA Built Alternator 12 Volt 105 Amp Insulated for Cat/IHC replaces: 10459247 1117738 645372 8C6163 4503112R91 965650R91 321-626 321-751
 
CNH 86585473 KIT, SEALS
 
CNH 82028130 SWITCH PRESSURE
 
6G4524 Strip-Wear Fits Caterpillar 120G 12G 130G 140G 14G 160G 24H 24M
 
Caterpillar 7W5040 7W-5040 ENGINE AIR FILTER Advanced High Efficiency Multipack (Pack of 4)
 
CNH 86531349 SEAL, OIL
 
5T8366 CATERPILLAR WEAR STRIP
 
Caterpillar PISTON (1686685)