DEUCE Engineer Support Tractor 7RR00001-UP (MACHINE) POWERED BY 3126 Engine ELECTRICAL AND STARTING SYSTEM Caterpillar SIS


OK request send
TRACK-TYPE TRACTOR
DEUCE TRACK-TYPE TRACTOR 7RR
DEUCE Engineer Support Tractor 7RR00001-UP (MACHINE) POWERED BY 3126 Engine KEBP0238

Parts group DEUCE:

For full view, you need register
ELECTRICAL AND STARTING SYSTEM
ALARM GP
123-6449 ALARM GP 123-6449 ALARM GP
S/N 7RR1-UP
12-VOLT TO 36-VOLT
PART OF 152-7542 WIRING GP-LIGHTING

ALTERNATOR GP-CHARGING
9X-7803 ALTERNATOR GP-CHARGING 9X-7803 ALTERNATOR GP-CHARGING
S/N 7RR1-UP
24-VOLT, 100-AMPERE. BRUSHLESS, REQUIRES 2300 RPM MINIMUM IDLE SPEED
PART OF 130-2789 MOUNTING GP-ALTERNATOR
FIELD REPLACEMENT ORDER @@@@@197-8820@@@@@
OPTIONAL FIELD REPLACEMENT ORDER @@@@@316-7251@@@@@, 3T-4688 TERMINAL-RING

197-8820 ALTERNATOR GP-CHARGING 197-8820 ALTERNATOR GP-CHARGING
S/N 7RR1-UP
24-VOLT, 95-AMPERE
PART OF 130-2789 MOUNTING GP-ALTERNATOR
FIELD REPLACEMENT FOR @@@@@ 9X-7803@@@@@

294-2029 ALTERNATOR GP-CHARGING 294-2029 ALTERNATOR GP-CHARGING
S/N 7RR1-UP
PART OF 284-4599 PROTECTION AR
AN ATTACHMENT

306-2174 ALTERNATOR GP-CHARGING 306-2174 ALTERNATOR GP-CHARGING
S/N 7RR1-UP
24-VOLT, 150-AMPERE
PART OF 294-2029 ALTERNATOR GP-CHARGING
AN ATTACHMENT

316-7251 ALTERNATOR GP-CHARGING 316-7251 ALTERNATOR GP-CHARGING
S/N 7RR1-UP
24-VOLT, 105-AMPERE
FIELD REPLACEMENT FOR @@@@@ 9X-7803@@@@@

BATTERY GP
124-5842 BATTERY & WIRING GP 124-5842 BATTERY & WIRING GP
S/N 7RR1-UP
PART OF 144-7169 ELECTRICAL AR

152-0463 BATTERY & WIRING GP 152-0463 BATTERY & WIRING GP
S/N 7RR1-UP
PART OF 167-0604 STARTING AR-COLD WEATHER
AN ATTACHMENT

210-8394 BATTERY & WIRING GP 210-8394 BATTERY & WIRING GP
S/N 7RR1-UP
COLD WEATHER
PART OF 210-4713 STARTING AR-COLD WEATHER
AN ATTACHMENT

CIRCUIT BREAKER GP
296-5123 CIRCUIT BREAKER GP 296-5123 CIRCUIT BREAKER GP
S/N 7RR1-UP
PART OF 284-4599 PROTECTION AR
AN ATTACHMENT

124-5857 PANEL GP-CIRCUIT BREAKER 124-5857 PANEL GP-CIRCUIT BREAKER
S/N 7RR1-UP
PART OF 144-7169 ELECTRICAL AR

147-0720 PANEL GP-CIRCUIT BREAKER 147-0720 PANEL GP-CIRCUIT BREAKER
S/N 7RR1-UP
PART OF 144-7169 ELECTRICAL AR

CONTROL GP-ELECTRONIC
122-8947 CONTROL & MTG GP-ENGINE ELEK 122-8947 CONTROL & MTG GP-ENGINE ELEK
S/N 4CW222-UP
PART OF 128-7367 ENGINE AR

141-6655 CONTROL & MTG GP-POWER TRAIN 141-6655 CONTROL & MTG GP-POWER TRAIN
S/N 7RR1-UP
PART OF 144-7166 OPERATOR AR

ELECTRONICS GP-ENGINE
101-7559 CONTROL GP-ENGINE ELECTRONIC 101-7559 CONTROL GP-ENGINE ELECTRONIC
PART OF 122-8947 CONTROL & MTG GP-ENGINE ELEK, 156-8587 CONTROL GP-ENGINE ELECTRONIC
FIELD REPLACEMENT ORDER @@@@@145-7807@@@@@

145-7807 CONTROL GP-ENGINE ELECTRONIC 145-7807 CONTROL GP-ENGINE ELECTRONIC
PART OF 101-7559 CONTROL GP-ENGINE ELECTRONIC
FIELD REPLACEMENT FOR @@@@@101-7559@@@@@

156-8587 CONTROL GP-ENGINE ELECTRONIC 156-8587 CONTROL GP-ENGINE ELECTRONIC
S/N 7RR1-UP
FIELD INSTALLATION

COVER GP
142-5113 COVER GP-WIRING HARNESS 142-5113 COVER GP-WIRING HARNESS
S/N 7RR1-UP
PART OF 144-8601 ACCESSORY GP-CAB

ELECTRICAL GP
144-7169 ELECTRICAL AR 144-7169 ELECTRICAL AR
S/N 7RR1-UP
PART OF 144-7162 GENERAL AR

LIGHTING GP
9X-1439 LAMP GP-FLOOD 9X-1439 LAMP GP-FLOOD -24-VOLT
S/N 7RR1-UP
PART OF 145-0022 LIGHTING GP-ROADING

9X-7169 LAMP GP-HEAD 9X-7169 LAMP GP-HEAD -LOW BEAM
S/N 7RR1-UP
24-VOLT
PART OF 145-0022 LIGHTING GP-ROADING
OPTIONAL FIELD REPLACEMENT ORDER 165-0699 KIT-MOUNTING BRACKET, 1-155-2270 KIT-CONNECTING PLUG, 2- 8T-8730 SOCKET-CONNECTOR

149-5534 LAMP GP-SIGNAL 149-5534 LAMP GP-SIGNAL -STOP, TAIL, TURN, RH
S/N 7RR1-UP
24-VOLT
PART OF 145-0020 LIGHTING GP-REAR

149-5535 LAMP GP-SIGNAL 149-5535 LAMP GP-SIGNAL -STOP, TAIL, TURN, LH
S/N 7RR1-UP
24-VOLT
PART OF 145-0021 LIGHTING GP-REAR

145-0020 LIGHTING GP-REAR 145-0020 LIGHTING GP-REAR -RH
S/N 7RR1-UP
PART OF 145-0022 LIGHTING GP-ROADING

145-0021 LIGHTING GP-REAR 145-0021 LIGHTING GP-REAR -LH
S/N 7RR1-UP
PART OF 145-0022 LIGHTING GP-ROADING

145-0022 LIGHTING GP-ROADING 145-0022 LIGHTING GP-ROADING
S/N 7RR1-UP
PART OF 144-7169 ELECTRICAL AR

SENDER GP
150-1681 SENDER GP 150-1681 SENDER GP
S/N 7RR1-UP
PART OF 144-7169 ELECTRICAL AR

SENSOR GP
150-9573 SENSOR GP-ENGINE 150-9573 SENSOR GP-ENGINE
S/N 4CW222-UP
PART OF 128-7367 ENGINE AR

126-7896 SENSOR GP-POSITION 126-7896 SENSOR GP-POSITION
S/N 7RR1-UP
PART OF 145-0076 CONTROL GP-TRANSMISSION

198-8762 SENSOR GP-POSITION 198-8762 SENSOR GP-POSITION
S/N 7RR1-UP
PART OF 9U-9491 CONTROL GP-TRANSMISSION HYD

204-7949 SENSOR GP-POSITION 204-7949 SENSOR GP-POSITION
S/N 7RR1-UP
72-DEGREE
PART OF 113-4799 PEDAL GP-GOVERNOR

161-9927 SENSOR GP-PRESSURE 161-9927 SENSOR GP-PRESSURE
S/N 4CW222-UP
PART OF 150-9573 SENSOR GP-ENGINE

167-1709 SENSOR GP-PRESSURE 167-1709 SENSOR GP-PRESSURE
S/N 4CW222-UP
PART OF 150-9573 SENSOR GP-ENGINE

119-4142 SENSOR GP-SPEED 119-4142 SENSOR GP-SPEED
S/N 4CW222-UP
FIELD REPLACEMENT FOR @@@@@169-3300@@@@@

150-1683 SENSOR GP-SPEED 150-1683 SENSOR GP-SPEED
S/N 7RR1-UP
PART OF 144-7169 ELECTRICAL AR

169-3300 SENSOR GP-SPEED 169-3300 SENSOR GP-SPEED -ENGINE TIMING
S/N 4CW222-UP
PART OF 150-9573 SENSOR GP-ENGINE
FIELD REPLACEMENT ORDER @@@@@245-4630@@@@@

245-4630 SENSOR GP-SPEED 245-4630 SENSOR GP-SPEED
S/N 4CW222-UP
FIELD REPLACEMENT FOR @@@@@169-3300@@@@@, @@@@@119-4142@@@@@

106-0735 SENSOR GP-TEMPERATURE 106-0735 SENSOR GP-TEMPERATURE
S/N 4CW222-UP
PROVIDES SENSORS FOR MONITORING MARINE TRANSMISSION OIL TEMP AND PRESSURE, 3 PIN ACTIVE
PART OF 150-9573 SENSOR GP-ENGINE

SOLENOID GP
122-5053 VALVE GP-SOLENOID 122-5053 VALVE GP-SOLENOID
S/N 4CW222-UP
PART OF 107-1228 PUMP GP-UNIT INJECTOR HYD

STARTING AID GP
118-7284 STARTING AID GP 118-7284 STARTING AID GP -AIR INLET HEATER
S/N 4CW222-UP
24-VOLT
PART OF 128-7367 ENGINE AR

126-5835 STARTING AID GP-ETHER 126-5835 STARTING AID GP-ETHER
S/N 7RR1-UP
PART OF 144-7163 INSTALLATION AR-ENGINE

STARTING AR
167-0604 STARTING AR-COLD WEATHER 167-0604 STARTING AR-COLD WEATHER
S/N 7RR1-UP
AN ATTACHMENT

210-4713 STARTING AR-COLD WEATHER 210-4713 STARTING AR-COLD WEATHER
S/N 7RR1-UP
AN ATTACHMENT

STARTING MOTOR GP
145-2413 STARTING MOTOR GP-ELECTRIC 145-2413 STARTING MOTOR GP-ELECTRIC
S/N 7RR1-UP
PART OF 149-1125 STARTING MOTOR GP-ELECTRIC

149-1125 STARTING MOTOR GP-ELECTRIC 149-1125 STARTING MOTOR GP-ELECTRIC
S/N 7RR1-UP
24 VOLT
PART OF 138-8046 ENGINE AR, 144-7163 INSTALLATION AR-ENGINE

SWITCH GP
203-4834 SWITCH & MTG GP-RECOIL 203-4834 SWITCH & MTG GP-RECOIL
S/N 7RR1-UP
PART OF 203-8489 SWITCH GP-LIMIT
AN ATTACHMENT

220-2068 SWITCH & MTG GP-RECOIL 220-2068 SWITCH & MTG GP-RECOIL -RECOIL INDICATOR
S/N 7RR198-UP
PART OF 144-7169 ELECTRICAL AR

203-8489 SWITCH GP-LIMIT 203-8489 SWITCH GP-LIMIT
S/N 7RR1-UP
AN ATTACHMENT

3E-0075 SWITCH GP-MAGNETIC 3E-0075 SWITCH GP-MAGNETIC
S/N 4CW222-UP
24-VOLT
PART OF 152-3385 WIRING GP-ELECTRONIC CONTROL
FIELD REPLACEMENT FOR @@@@@175-2324@@@@@, @@@@@175-2322@@@@@

167-0138 SWITCH GP-MAGNETIC 167-0138 SWITCH GP-MAGNETIC
S/N 7RR1-UP
24-VOLT
PART OF 124-5857, 147-0720 PANEL GP-CIRCUIT BREAKER
FIELD REPLACEMENT ORDER @@@@@241-8368@@@@@, @@@@@254-3783@@@@@

175-2322 SWITCH GP-MAGNETIC 175-2322 SWITCH GP-MAGNETIC
S/N 4CW222-UP
24-VOLT
PART OF 3E-0075 SWITCH GP-MAGNETIC
FIELD REPLACEMENT ORDER @@@@@ 3E-0075@@@@@

175-2324 SWITCH GP-MAGNETIC 175-2324 SWITCH GP-MAGNETIC
S/N 4CW222-UP
24-VOLT
PART OF 3E-0075 SWITCH GP-MAGNETIC
FIELD REPLACEMENT ORDER @@@@@ 3E-0075@@@@@

241-8368 SWITCH GP-MAGNETIC 241-8368 SWITCH GP-MAGNETIC
S/N 7RR1-UP
24-VOLT
FIELD REPLACEMENT FOR @@@@@167-0138@@@@@

254-3783 SWITCH GP-MAGNETIC 254-3783 SWITCH GP-MAGNETIC
S/N 7RR1-UP
24-VOLT. MAIN RELAY
FIELD REPLACEMENT FOR @@@@@167-0138@@@@@

152-5279 SWITCH GP-TOGGLE 152-5279 SWITCH GP-TOGGLE
S/N 7RR1-UP
PART OF 144-7169 ELECTRICAL AR

WARNING GP
203-8495 WARNING GP-RECOIL 203-8495 WARNING GP-RECOIL
S/N 7RR198-UP
PART OF 144-7169 ELECTRICAL AR, 203-8489 SWITCH GP-LIMIT
ALSO AN ATTACHMENT

WIRING GP
9W-0742 BLOCK GP-JUNCTION 9W-0742 BLOCK GP-JUNCTION -BATTERY
S/N 7RR1-UP
PART OF 124-5844 WIRING GP-MACHINE

180-3666 FASTENER GP-WIRING HARNESS 180-3666 FASTENER GP-WIRING HARNESS
S/N 4CW222-UP
PART OF 128-7367 ENGINE AR

231-2927 WIRING GP-AUXILIARY 231-2927 WIRING GP-AUXILIARY -20 AMP
S/N 7RR1-UP
AN ATTACHMENT

249-7011 WIRING GP-CONSOLE 249-7011 WIRING GP-CONSOLE
S/N 7RR1-UP
PART OF 144-7169 ELECTRICAL AR

152-3385 WIRING GP-ELECTRONIC CONTROL 152-3385 WIRING GP-ELECTRONIC CONTROL
S/N 4CW222-UP
PART OF 128-7367 ENGINE AR

124-5856 WIRING GP-INSTR & IGNITION 124-5856 WIRING GP-INSTR & IGNITION
S/N 7RR1-UP
PART OF 144-7169 ELECTRICAL AR

152-7542 WIRING GP-LIGHTING 152-7542 WIRING GP-LIGHTING
S/N 7RR1-UP
PART OF 144-7169 ELECTRICAL AR

124-5844 WIRING GP-MACHINE 124-5844 WIRING GP-MACHINE
S/N 7RR1-UP
PART OF 144-7169 ELECTRICAL AR

HEATER GP
1Q-4311 HEATER GP-JACKET WATER 1Q-4311 HEATER GP-JACKET WATER
S/N 7RR1-UP
PART OF 144-7867 HEATER & MTG GP-CAB
AN ATTACHMENT



Information:

(For parts list, see above)

ELECTRICAL AND STARTING SYSTEM
ALARM GP

Installation of 244-1090 Alarm Gp {7400, 7402, 7407} Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 262-6141 Alarm Gp {7406} Installation of 262-6141 Alarm Gp {7406}
ALTERNATOR GP-CHARGING

Alternator 30SI Series and 34SI Series Alternator

General Information 30SI Series and 34SI Series Alternator
Normal Operation 30SI Series and 34SI Series Alternator
Component Description 30SI Series and 34SI Series Alternator

T1 Alternator Output - Test 30SI Series and 34SI Series Alternator
T2 Electrical System Current - Test 30SI Series and 34SI Series Alternator
T3 Charging System - Test 30SI Series and 34SI Series Alternator
T4 Alternator Drive System - Check 30SI Series and 34SI Series Alternator
T5 Alternator Current - Test 30SI Series and 34SI Series Alternator
T6 Residual Magnetism Restoration 30SI Series and 34SI Series Alternator
T7 Identifying Source of Current Draw - Test 30SI Series and 34SI Series Alternator
T8 Alternator Overcharging - Test 30SI Series and 34SI Series Alternator
General Information 30SI Series and 34SI Series Alternator
Initial Troubleshooting Procedure 30SI Series and 34SI Series Alternator
Component - Test 30SI Series and 34SI Series Alternator

MID 161 - CID 0168 - FMI 00 Product Link - PL522/523
MID 161 - CID 0168 - FMI 01 Product Link - PL522/523
MID 161 - CID 1251 - FMI 03 Product Link - PL522/523
MID 122 - CID 0168 - FMI 00 Product Link 121S/300
MID 122 - CID 0168 - FMI 01 Product Link 121S/300
MID 122 - CID 1251 - FMI 03 Product Link 121S/300

Alternator - Disassemble 30SI Series and 34SI Series Alternator
Alternator - Assemble 30SI Series and 34SI Series Alternator

Charging System Troubleshooting{1406} Charging System Troubleshooting{1406}
BATTERY GP
Battery Test Procedure{1401} Battery Test Procedure{1401}

Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B} Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Process for Communicating an Incident with a Battery{1401} Process for Communicating an Incident with a Battery{1401}
CONTROL GP-ELECTRONIC

Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920} 1999/08/17
New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat <SUP>&reg;</SUP> Products {7610, 7620} 2014/02/06

Instructions for Installing Seat Belt Reminder System on All Caterpillar Products{1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620} Instructions for Installing Seat Belt Reminder System on All Caterpillar Products{1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}

Communication Adapter II{0600, 0709, 7600, 7610} Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490} Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
ELECTRONICS GP-ENGINE

Electronic Control Modules and Computer Viruses {7610} 2000/12/04
New Factory Password System for Caterpillar Engines {1000, 1900} 2005/03/07
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620} 2012/08/10

Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620} 2007/10/01

277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930} 2006/09/04
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620} 2007/10/22

Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620} Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920} Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920} Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control{1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610} Diagnostic Code Information for Caterpillar ® Electronic Control{1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp{1901, 1920} Procedure to Flash the ADEM 3 Engine Electronic Control Gp{1901, 1920}
ELECTRONICS GP-POWER TRAIN

277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783} 2007/10/22

Accessing Flash Software for Machines{7610, 7620} Accessing Flash Software for Machines{7610, 7620}
ELECTRONICS GP-MACHINE

Parts Information for Locating Components of New Electronic Systems in SIS and Parts Manual {7602, 7631} 2001/04/09
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620} 2011/10/20

Installation of the Machine Security System (MSS) Universal Attachment Kit{7631, 7631} Installation of the Machine Security System (MSS) Universal Attachment Kit{7631, 7631}
INSTALLATION GP

Improved End - of - Line - Test Fixture for the Product Link Antenna is Now Used {7606} 2006/11/13

Installation of CAESultra for Track-Type Tractors{7010, 733T, 7490, 7604} Installation of CAESultra for Track-Type Tractors{7010, 733T, 7490, 7604}
LIGHTING GP

A New Halogen Lamp Is Now Available for Certain Cat Products {1434} 2011/06/29

Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429} Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
MOTOR GP

Part Numbers for Electric Motors That Are Used in HVAC Have Changed {5927} 2000/10/30
An Improved Starting Motor is Now Available {1453} 2007/04/30
A New Starter Solenoid is Now Available {1467} 2008/03/17

254-0204 Phase and Motor Rotation Tester{0374, 0599, 0709, 0734} 254-0204 Phase and Motor Rotation Tester{0374, 0599, 0709, 0734}
PANEL GP-CIRCUIT BREAKER

Circuit Breaker Harness Assembly{1420} Circuit Breaker Harness Assembly{1420}
SENSOR GP

MID 122 - CID 0269 - FMI 03 Product Link 121S/300
MID 122 - CID 0269 - FMI 04 Product Link 121S/300

A New Speed Sensor is Available {1907} 2004/03/08
Correction to Service Magazine , "Improved Speed Sensors Are Now Available" {1439, 3141, 3175, 4803} 2007/06/04
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562} 2012/10/04
A New Transmission Harness and a New Position Sensor Group Are Now Used on Certain Cat Products {1408, 1439, 3167} 2009/11/05

Installation Of The Transmission Output Speed Sensor{3175} Installation Of The Transmission Output Speed Sensor{3175}
Procedure to Test the Position Sensor of a Hydraulic Cylinder{1439, 7562} Procedure to Test the Position Sensor of a Hydraulic Cylinder{1439, 7562}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562} Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor{5574, 5736} Reuse Guideline for Hydraulic Cylinder Position Sensor{5574, 5736}
SHUTOFF GP

New Fuel Shutoff Solenoids With Improved Durability Available {1259} 1999/03/22
STARTING AID GP
A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456} 2013/09/19
STARTING MOTOR GP

Starting Motor 37-MT, 41-MT, and 42-MT Series Starting Motors

General Information 37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description 37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation 37-MT, 41-MT, and 42-MT Series Starting Motors

No Load - Test 37-MT, 41-MT, and 42-MT Series Starting Motors
Brush and Brush Holder - Check 37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust 37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test 37-MT, 41-MT, and 42-MT Series Starting Motors

Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear 37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly 37-MT, 41-MT, and 42-MT Series Starting Motors
General Information 37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor - Disassemble - 37-MT and 41-MT 37-MT, 41-MT, and 42-MT Series Starting Motors
General Information 37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT 37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT 37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT 37-MT, 41-MT, and 42-MT Series Starting Motors

Caterpillar Remanufactured Electric Starting Motors Are Improved {1453} 2011/05/16

Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469} Caterpillar PRELUB® Diagnostics{1469}
SUPPRESSOR GP-ELECTRONIC

New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435} 1999/11/29
SWITCH GP
A New Oil Pressure Switch is Now Available {7421} 2005/05/09
Improved Procedure for Verifying the Operation of the Battery Disconnect System. {1411} 2009/04/06
New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809} 2011/06/06
An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000} 2011/12/01

Machine Start Switch Key May Not Fit Properly{1416} Machine Start Switch Key May Not Fit Properly{1416}
TOOLS

Service Tools 37-MT, 41-MT, and 42-MT Series Starting Motors
Service Tools Product Link - PL522/523
Service Tools Product Link 121S/300

Diagnostic Cables and Harnesses Are Available {0785} 2000/12/25
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785} 2005/03/07
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782} 2006/12/04
Updated Instruction For The Bypass Harness {0785, 1408} 2008/03/17
New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606} 2013/08/15

The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785} 2004/04/19
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408} 2006/03/20
Enhanced Voltmeter Leads Are Now Available {0785} 2006/02/13
Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785} 2006/10/16

Procedure to Access the License Information for Caterpillar Electronic Technician (CAT ET){0785} Procedure to Access the License Information for Caterpillar Electronic Technician (CAT ET){0785}
An Aid To Reading Multimeter Scales{0785} An Aid To Reading Multimeter Scales{0785}

348-5430 Multi-Tool Gp 2 {0709, 0769, 0785} 348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
317-7484 Communications Adapter 3{1900, 4800, 7490, 7600} 317-7484 Communications Adapter 3{1900, 4800, 7490, 7600}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553} Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the Communications Adapter 3{1900} Using the Communications Adapter 3{1900}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709} 146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709} Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709} 131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
VALVE GP

New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051} 1999/11/22
WIRING GP

Electrical Connector - Inspect Product Link - PL522/523
Wiring Harness (Open Circuit) - Test Product Link - PL522/523
Wiring Harness (Short Circuit) - Test Product Link - PL522/523
Electrical Connector - Inspect Product Link 121S/300
Wiring Harness (Open Circuit) - Test Product Link 121S/300
Wiring Harness (Short Circuit) - Test Product Link 121S/300

Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566} 2000/04/10
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408} 2000/06/26
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553} 2000/10/09
Service of the Machined Terminals and the Stamped and Formed Terminals {7553} 2006/11/13
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408} 2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408} 2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556} 2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459} 2012/09/21

Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408} 2000/07/01
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408} 2010/05/13

Cross-Reference for Electrical Connectors{7553} Cross-Reference for Electrical Connectors{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553} Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553} Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Guidelines for Routing and Installing Wire Harness Assemblies{1408, 7553} Guidelines for Routing and Installing Wire Harness Assemblies{1408, 7553}
Repair Procedure for Damaged Harness Wiring{1408} Repair Procedure for Damaged Harness Wiring{1408}

Testing The Function Of The 3E6477 Relay Assembly (24 Volt) Testing The Function Of The 3E6477 Relay Assembly (24 Volt)

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408} Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
ELECTRONICS GP-MONITOR

New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link 522 Systems {7494, 7606, 7620} 2012/11/28
ELECTRONICS GP-COMMUNICATION

System Overview Product Link 121S/300
System Overview Product Link - PL522/523
System Components Product Link - PL522/523
Configuration Product Link - PL522/523
Installation Parameters Configure Product Link - PL522/523
Spare Input Configure Product Link - PL522/523
Commands Product Link - PL522/523
System Components Product Link 121S/300
Spare Inputs Product Link 121S/300
Configuration Product Link 121S/300
Installation Parameters Configure Product Link 121S/300
Report Parameters Configure Product Link 121S/300
Wireless Service Configure Product Link 121S/300
Spare Input Configure Product Link 121S/300
Commands Product Link 121S/300

Electronic Control Module (ECM) - Flash Program Product Link - PL522/523
Electronic Control Module (ECM) - Replace Product Link - PL522/523
Specifications Product Link - PL522/523
Electronic Control Module (ECM) - Flash Program Product Link 121S/300
Electronic Control Module (ECM) - Replace Product Link 121S/300
Specifications Product Link 121S/300

General Information Product Link - PL522/523
Diagnostic Capabilities Product Link - PL522/523
Electronic Service Tool Does Not Communicate with ECM Product Link - PL522/523
Reports and Messages Not Available Product Link - PL522/523
Position Reports Not Available Product Link - PL522/523
Reporting Interval Erratic Product Link - PL522/523
Diagnostics and Events Not Available Product Link - PL522/523
Operating Hours Discrepancy Product Link - PL522/523
Diagnostic Code List Product Link - PL522/523
MID 161 - CID 0254 - FMI 04 Product Link - PL522/523
MID 161 - CID 0254 - FMI 12 Product Link - PL522/523
MID 161 - CID 1250 - FMI 09 Product Link - PL522/523
MID 161 - CID 1888 - FMI 14 Product Link - PL522/523
MID 161 - CID 3766- FMI 14 Product Link - PL522/523
General Information Product Link 121S/300
Diagnostic Capabilities Product Link 121S/300
Electronic Service Tool Does Not Communicate with ECM Product Link 121S/300
Position Reports Not Available Product Link 121S/300
Reporting Interval Erratic Product Link 121S/300
Diagnostics and Events Not Available Product Link 121S/300
Operating Hours Discrepancy Product Link 121S/300
Diagnostic Code List Product Link 121S/300
MID 122 - CID 0254 - FMI 04 Product Link 121S/300
MID 122 - CID 0254 - FMI 12 Product Link 121S/300
MID 122 - CID 1250 - FMI 09 Product Link 121S/300
ECM Does Not Communicate with User Interface Product Link 121S/300

New Version of Product Link Available {7602} 2001/08/27
New Flash File Software Is Used for Product Link 151/201 {7606, 7620} 2002/07/15
New Flexible Antenna Whip Available for Product Link {7606} 2002/12/02
New Flash File Software Is Used for Product Link 151/201 {7620} 2003/03/10
New Software Is Used on Product Link 151/201 {7606, 7620} 2003/09/01
Product Link Cellular Is Now Available {7602} 2004/08/02
Correction to Special Instruction, REHS2143, "Product Link PL-102C System Installation" {7602} 2004/08/02
Correction to Special Instruction, &quot;Product Link PL102C System Installation&quot; and Systems Operation, Testing and Adjust, &quot;Product Link PL102C&quot; {7602} 2004/12/13
New PC Service Tool Software Released for Cellular Based Product Link {7620} 2004/12/20
Correction to Special Instruction, "Product Link PL102C System Installation" {7620} 2004/12/13
Procedure to Identify which COM PORT the USB Device Is Occupying and the Procedure to Change the Default COM PORT Setting {7606} 2005/01/10
New Product Link Software Available for PL151 and PL201 {7606} 2005/01/10
New Product Link Systems Are Now Available {7606} 2005/02/07
New Software Available for Product Link PL-151 and PL-201 {7620} 2005/05/02
New Product Link Software Is Now Available {7606, 7620} 2005/12/19
New Software Available for Product Link {7606, 7620} 2006/10/16
New Product Link Software Is Now Available {7606, 7620} 2007/05/14
New Product Link Hardware Is Now Available {7606} 2007/05/07
New Software for Product Link is Now Available {7606, 7620} 2008/03/10
New Software for Product Link is Now Available {7606, 7620} 2008/05/19
New Software is Now Used for the Product Link PL121SR and PL321SR Systems {7606, 7620} 2009/10/15
New Software for Product Link (PL300) Is Now Available {7606, 7620} 2011/10/11
New Software Is Now Available for Product Link (PL 121) {7602, 7610, 7620} 2011/12/15
Improved Process for Activating Product Link PL522 On Assets In China {7606} 2012/11/19
Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606} 2014/03/10
New Software Is Now Available For Product Link 522 Systems On All Cat<SUP>&reg;</SUP> Products {7606, 7620} 2013/05/28
Improved VisionLink<SUP>TM</SUP>Store is Now Available for all Caterpillar Products {7606} 2013/03/29
Device Transfers Are Now Supported In VisionLink<SUP>TM</SUP> Store {7606} 2013/03/29
Improved VisionLink<SUP>TM</SUP> Store for Minimizing Delay in Appearance of VisionLink Store - Modules is Now Available for All Caterpillar Products {7606} 2013/03/29
New Product Link Software for PL121 and PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7610, 7620} 2013/05/02
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link 522 System {7606} 2013/07/22
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620} 2013/07/08
New Software Is Now Available For All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620} 2013/08/19
Procedure for Improving Antenna Communication on All Machines Equipped With Product Link {733B, 7606} 2013/11/08
Improvements for Products and Systems Connected to Product Link {7606} 2013/10/02
New Product Link Software for PL300 Is Now Available for All Cat <SUP>&reg;</SUP>Products {7606, 7620} 2013/10/21
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link PL421 or Product Link PL420 System {7606} 2013/10/02
Improved Product Link Satellite System Special Instruction guide {7606} 2013/12/20
New Software for Product Link PL522 Module Is Now Available {7606} 2014/04/18

General Hazard Information Product Link - 121SR/321SR/420/421/ 522/523
Safety Signs and Labels Product Link - 121SR/321SR/420/421/ 522/523

Installation Instructions For Product Link 101 Inline Timer{7602} Installation Instructions For Product Link 101 Inline Timer{7602}
Product Link MODEM Programming with Cat Electronic Technician (ET){7606, 7620} Product Link MODEM Programming with Cat Electronic Technician (ET){7606, 7620}
Product Link PL-102C System Installation{7606} Product Link PL-102C System Installation{7606}
Product Link PL-102C{7602} Product Link PL-102C{7602}
Installation Guide for Product Link PL121SR and PL321{7606} Installation Guide for Product Link PL121SR and PL321{7606}
Operation of Product Link{7606} Operation of Product Link{7606}
Product Link PL121SR{7606} Product Link PL121SR{7606}
Release Notes for VisionLink and VisionLink Store for All Caterpillar Products{7606} Release Notes for VisionLink and VisionLink Store for All Caterpillar Products{7606}

Product Link Antenna Placement{7606} Product Link Antenna Placement{7606}
Product Link Hours Versus Service Meter Hours Accuracy Issue{7606} Product Link Hours Versus Service Meter Hours Accuracy Issue{7606}
Product Link PL321 May Accumulate 24 Hours Daily{7606} Product Link PL321 May Accumulate 24 Hours Daily{7606}
Registration of Product Link in EquipmentManager{7606} Registration of Product Link in EquipmentManager{7606}
Location Updates Are Not Being Reported From The Product Link PL321{7606} Location Updates Are Not Being Reported From The Product Link PL321{7606}
Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat<SUP>&reg;</SUP> Machines Equipped With VIMS3G{7601, 7620} Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat® Machines Equipped With VIMS3G{7601, 7620}
CAMERA GP

Generic Installation of the WAVS Cleaning System{7348} Generic Installation of the WAVS Cleaning System{7348}


You can buy parts on Amazon: .

$19.92
23-07-2018
9N3366 Element A Fits Caterpillar 773D 775D

9N3366  

23-07-2018
CATERPILLAR RING 1M2910 NEW

1M2910  

23-07-2018
3V2899 Gage A Fits Caterpillar

3V2899