MINI HYD EXCAVATOR Caterpillar SIS online


MINI HYD EXCAVATOR
303.5 MINI HYD EXCAVATOR DCH



Select model MINI HYD EXCAVATOR:





Information:

(For parts list, you need select model above)

AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP

Air Cleaner - Remove and Install 303.5 Mini Hydraulic Excavator

Improved Air Cleaner Bracket for the 302.5 and 303.5 Mini Hydraulic Excavator {1051} 2003/09/22

Engine Air Filter Element - Clean/Replace 303.5 Mini Hydraulic Excavator

Caterpillar Certified Procedure to Inspect and Clean Air Filters{1051, 1054} Caterpillar Certified Procedure to Inspect and Clean Air Filters{1051, 1054}
EXHAUST GP

Exhaust Manifold - Remove and Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Diesel Particulate Filter Monitoring System{1091, 7490} Diesel Particulate Filter Monitoring System{1091, 7490}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only{1000, 1091} Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only{1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only{1000, 1091, 7490} Generation 3 DPFdm Diagnostic Module Installation Manual - California Only{1000, 1091, 7490}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091} Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498} Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D} 319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703} 188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
MANIFOLD GP-INLET

Inlet Manifold 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
MUFFLER GP

Muffler - Remove and Install 303.5 Mini Hydraulic Excavator
TURBOCHARGER GP

A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052} 2002/12/09
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052} 2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307} 2006/02/06
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053} 2010/03/22

A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052} 2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053} 2010/03/22

A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052} 2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053} 2010/03/22

Instructions for the Service Replacement of the Turbochargers{1052} Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers{1052} Installation Instructions for Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines{1052, 1053} Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines{1052, 1053}
AFTERTREATMENT GP

Additional Requirements Are Required for Emission Compliance on Replacement Engines {1000, 775E} 2012/09/11
ASPHALT SPRAY SYSTEM
PUMP GP

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6){5061, 5073} Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6){5061, 5073}
BASIC ENGINE
AIR COMPRESSOR GP

A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803} 2004/11/15
BELT TIGHTENER GP

Belt Tension Chart 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Belt - Inspect/Adjust/Replace 303.5 Mini Hydraulic Excavator
CAMSHAFT GP

Camshaft 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Excessive Bearing Wear - Inspect 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Camshaft - Remove 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Camshaft - Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
CRANKSHAFT GP

Crankshaft 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Main Bearings - Inspect 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Bearing Clearance - Check 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Crankshaft Pulley - Remove and Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Crankshaft - Remove 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Crankshaft - Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160} 2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202} 2006/01/16

420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230} 420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
CYLINDER BLOCK GP

Cylinder Block 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Cylinder Block - Inspect 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317} Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317} Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705} Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CYLINDER HEAD GP

Cylinder Head Valves 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Fuel Injection Nozzles 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Cylinder Head 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Engine Valve Lash - Inspect/Adjust 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Cylinder Head - Inspect 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Fuel Injection Nozzle - Test 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Cylinder Head - Remove 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Cylinder Head - Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Springs - Remove and Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Caterpillar Warranty Claims on Cylinder Head Valves {1105} 2005/10/03

Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767} Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759} Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108} CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}

Engine Valve Failure Modes{1100, 1105} Engine Valve Failure Modes{1100, 1105}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100} Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
DRIVE GP-FAN

Fan Drive 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
ENGINE GP

Oil and Your Engine{1000} Oil and Your Engine{1000}
FLYWHEEL GP

Flywheel 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Flywheel Housing 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Flywheel - Inspect 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Flywheel - Remove 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Flywheel - Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
GEAR GP

Gear Group (Front) 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Gear Group (Front) - Time 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206} 2012/12/13

An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206} 2012/12/14
HOUSING GP-FLYWHEEL

Flywheel Housing - Inspect 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Flywheel Housing - Remove and Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
HOUSING GP-FRONT

Housing (Front) 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Housing (Front) - Remove 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Housing (Front) - Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
LIFTING GP-ENGINE

Engine Lifting Bracket 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
PAN GP-OIL
Engine Oil Pan 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Engine Oil Pan - Remove and Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613} 2006/03/20

Engine Oil Level - Check 303.5 Mini Hydraulic Excavator
Engine Oil and Filter - Change 303.5 Mini Hydraulic Excavator

Obtaining Oil Sample for Analysis{1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542} Obtaining Oil Sample for Analysis{1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
PISTON & ROD GP

Connecting Rod 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Piston and Rings 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Compression - Test 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Connecting Rod - Inspect 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Inspect 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Pistons and Connecting Rods - Disassemble 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

New Guidelines for Inspecting Pistons {1214} 2006/01/02

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines{1000, 1215} Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines{1000, 1215}
PULLEY GP

Crankshaft Pulley 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
PUMP GP-GEAR

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3){5061, 5073} Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3){5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps{5073} Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps{5073}

Bench Test Procedure for Gear Pumps{5073} Bench Test Procedure for Gear Pumps{5073}
TOOLS

Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000} Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000} Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
4C-9832 Large Engine Roll-Over Stand {0599, 0701} 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701} 9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781} Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738} 146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
SERPENTINE/V-BELTS

Belt Tension Chart 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

V-Belts - Remove and Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

PRODUCT SUPPORT PROGRAM FOR IMPROVED ENGINE COOLING ON CERTAIN 303.5 AND 304.5 MINI EXCAVATORS PRODUCT SUPPORT PROGRAM FOR IMPROVED ENGINE COOLING ON CERTAIN 303.5 AND 304.5 MINI EXCAVATORS
VALVE MECHANISM GP

Valve Mechanism Cover 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Rocker Shaft 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Finding Top Center Position for No. 1 Piston 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Valve Mechanism Cover - Remove and Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Lifter Group - Remove and Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209} 2012/10/08

Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209} 2012/10/08

Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209} 2012/10/08

Engine Valve Lash - Check 303.5 Mini Hydraulic Excavator
BRAKING SYSTEM
ACCUMULATOR GP

Accumulator Discharging and Charging Procedures{0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474} Accumulator Discharging and Charging Procedures{0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
BRAKE GP

149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551} 149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731} 193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
CYLINDER GP

Double Lip Wiper Seals Must Be Installed Properly {7562} 2002/12/09

Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562} Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
TOOLS

243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738} 2004/07/05
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784} 2004/12/27

Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700} Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000} HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057} 4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700} Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
COOLING SYSTEM
COOLANT CONDITIONER GP

Cooling System Coolant Extender (ELC) - Add 303.5 Mini Hydraulic Excavator
COOLER GP

100% Leak Testing of Oil Coolers {1378} 2007/04/23

100% Leak Testing of Oil Coolers {1378} 2007/04/30

Oil Filter - Inspect 303.5 Mini Hydraulic Excavator
FAN GP

Fan - Remove and Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
LINES GP-WATER

Water Temperature Regulator 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Water Temperature Regulator - Remove and Install 303.5 Mini Hydraulic Excavator

Water Temperature Regulators (Thermostats) Have Been Redesigned {1355, 1380, 1393} 2013/04/17

Water Temperature Regulators (Thermostats) Have Been Redesigned {1355, 1380, 1393} 2012/12/19

Cooling System Hoses - Inspect 303.5 Mini Hydraulic Excavator
Cooling System Water Temperature Regulator - Replace 303.5 Mini Hydraulic Excavator
PUMP GP-WATER

Water Pump 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Water Pump - Remove and Install 303.5 Mini Hydraulic Excavator

Guidelines for Water Pump Visual Inspection {1361} 2002/08/05
Water Pumps {1361} 2008/12/01
RADIATOR GP

Radiator and Fan - Remove 303.5 Mini Hydraulic Excavator
Radiator and Fan - Install 303.5 Mini Hydraulic Excavator

Cooling System Coolant (ELC) - Change 303.5 Mini Hydraulic Excavator
Radiator Core - Clean 303.5 Mini Hydraulic Excavator
Cooling System Level - Check 303.5 Mini Hydraulic Excavator
Cooling System Pressure Cap - Clean/Replace 303.5 Mini Hydraulic Excavator
TOOLS

Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542} 2004/11/29

Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060} Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
DIFFERENTIAL STEERING SYSTEM
MOTOR GP

General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors{5058, 5070} General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors{5058, 5070}
PUMP GP

Repair Process for Hydraulic Gear Pumps{5073} Repair Process for Hydraulic Gear Pumps{5073}
ELECTRICAL AND STARTING SYSTEM
ALARM GP

Travel Alarm - If Equipped 303.5 Mini Hydraulic Excavator
Alert Indicators 303.5 Mini Hydraulic Excavator
Travel Alarm - Test - If Equipped 303.5 Mini Hydraulic Excavator

Installation of 244-1090 Alarm Gp {7400, 7402, 7407} Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 262-6141 Alarm Gp {7406} Installation of 262-6141 Alarm Gp {7406}
ALTERNATOR GP-CHARGING

Alternator and Regulator 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Alternator - Test 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

MID 124 - CID 0168 - FMI 00 Machine Security System
MID 124 - CID 0168 - FMI 01 Machine Security System
MID 161 - CID 0168 - FMI 00 Product Link - PL522/523
MID 161 - CID 0168 - FMI 01 Product Link - PL522/523
MID 161 - CID 1251 - FMI 03 Product Link - PL522/523
MID 122 - CID 0168 - FMI 00 Product Link 121S/300
MID 122 - CID 0168 - FMI 01 Product Link 121S/300
MID 122 - CID 1251 - FMI 03 Product Link 121S/300

Alternator - Remove and Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Alternator - Remove and Install 303.5 Mini Hydraulic Excavator

Charging System Troubleshooting{1406} Charging System Troubleshooting{1406}
BATTERY GP

Battery - Test 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Battery or Battery Cable - Inspect/Replace 303.5 Mini Hydraulic Excavator
Battery - Clean 303.5 Mini Hydraulic Excavator
Battery - Recycle 303.5 Mini Hydraulic Excavator
Fuses - Replace 303.5 Mini Hydraulic Excavator

Battery Test Procedure{1401} Battery Test Procedure{1401}

Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B} Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Process for Communicating an Incident with a Battery{1401} Process for Communicating an Incident with a Battery{1401}
CONTROL GP-ELECTRONIC

New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat <SUP>&reg;</SUP> Products {7610, 7620} 2014/02/06

Communication Adapter II{0600, 0709, 7600, 7610} Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490} Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
ELECTRONICS GP-ENGINE

New Service Information Tool for CAT Dealers is Now Available {1900} 2002/06/17
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620} 2014/04/08

Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620} 2007/10/01

277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930} 2006/09/04
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620} 2007/10/22

Using the 217-0114 Adapter Cable As {0709, 1901, 1920} Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920} Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control{1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610} Diagnostic Code Information for Caterpillar ® Electronic Control{1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp{1901, 1920} Procedure to Flash the ADEM 3 Engine Electronic Control Gp{1901, 1920}
ELECTRONICS GP-POWER TRAIN

277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783} 2007/10/22
ELECTRONICS GP-MACHINE

Operation of Status Indicator Machine Security System
Protected Functions Machine Security System
Diagnostic Operation Machine Security System
Events Machine Security System
Service Operation Using Machine Security System Machine Security System
Key Information Machine Security System
Service Operation Using Service Tool Machine Security System
Electronic Control Module (ECM) Machine Security System
System Overview Machine Security System
Scheduled Access - "Security System Bypass Times" Machine Security System
General Information Machine Security System
Normal Operation Machine Security System
System Components Machine Security System
Cat Data Link Machine Security System

Glossary of Terms Machine Security System
Key - Program Machine Security System
System Disarm - Program - Security System Bypass Machine Security System
General Information Machine Security System
Electronic Control Module (ECM) - Replace Machine Security System
Software - Uninstall - "Immobilizer" Feature Machine Security System
Time - Set Machine Security System
Product Identification Number - Program Machine Security System
Electronic Control Module (ECM) - Flash Program Machine Security System
Factory Password - Obtain Machine Security System

Using Caterpillar Electronic Technician to Determine Diagnostic Codes Machine Security System
Lost Key Machine Security System
Diagnostic Code List Machine Security System
General Information Machine Security System
Engine Does Not Crank and Status Indicator Is Green Machine Security System
Engine Does Not Start and Status Indicator Is Continuously Red Machine Security System
MID 124 - CID 0248 - FMI 12 Machine Security System
MID 124 - CID 0817 - FMI 04 Machine Security System
MID 124 - CID 1391 - FMI 03 Machine Security System
MID 124 - CID 1391 - FMI 04 Machine Security System
MID 124 - CID 1392 - FMI 03 Machine Security System
MID 124 - CID 1392 - FMI 04 Machine Security System

New Firmware Is Now Available for Communications Adapter 3 {7610, 7620} 2011/10/20

Installation of the Machine Security System (MSS) Universal Attachment Kit{7631, 7631} Installation of the Machine Security System (MSS) Universal Attachment Kit{7631, 7631}
GLOW PLUG GP

Glow Plugs 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Glow Plugs - Test 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Glow Plugs - Remove and Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Do Not Use Ether with Machines that are Equipped with a Starting Aid {1412} 2002/11/04
INSTALLATION GP
Improved End - of - Line - Test Fixture for the Product Link Antenna is Now Used {7606} 2006/11/13
MOTOR GP

254-0204 Phase and Motor Rotation Tester{0374, 0599, 0709, 0734} 254-0204 Phase and Motor Rotation Tester{0374, 0599, 0709, 0734}
PANEL GP-CIRCUIT BREAKER

Circuit Breakers - Reset 303.5 Mini Hydraulic Excavator

Circuit Breaker Harness Assembly{1420} Circuit Breaker Harness Assembly{1420}
SENSOR GP

Engine Oil Pressure 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

MID 122 - CID 0269 - FMI 03 Product Link 121S/300
MID 122 - CID 0269 - FMI 04 Product Link 121S/300

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562} 2013/02/28

Procedure to Test the Position Sensor of a Hydraulic Cylinder{1439, 7562} Procedure to Test the Position Sensor of a Hydraulic Cylinder{1439, 7562}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562} Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
SHUTOFF GP

Fuel Shutoff Solenoid 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Fuel Shutoff Solenoid - Test 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
SOLENOID GP

Pilot and Travel Speed Manifold - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems
SOLENOID GP-SHUTOFF
Fuel Shutoff Solenoid - Remove and Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
STARTING AID GP

A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456} 2013/09/19
STARTING MOTOR GP

Electric Starting Motor 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Electric Starting System - Test 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Electric Starting Motor - Remove and Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Electric Starting Motor - Remove and Install 303.5 Mini Hydraulic Excavator

Examine Failed Starting Motors to Understand the Reason for Failure {1453} 2002/10/28

Caterpillar Remanufactured Electric Starting Motors Are Improved {1453} 2011/05/16

Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469} Caterpillar PRELUB® Diagnostics{1469}
SWITCH GP

Coolant Temperature Switch 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Engine Oil Pressure Switch 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Engine Oil Pressure Switch - Test 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Coolant Temperature Switch - Test 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Engine Oil Pressure Switch - Remove and Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Coolant Temperature Switch - Remove and Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Improved Procedure for Verifying the Operation of the Battery Disconnect System. {1411} 2009/04/06
An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000} 2011/12/01

Engine Start Switch 303.5 Mini Hydraulic Excavator
Light Switches - If Equipped 303.5 Mini Hydraulic Excavator
TOOLS

Service Tools Machine Security System
Service Tools Product Link - PL522/523
Service Tools Product Link 121S/300

Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785} 2002/02/11
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is Now Available {0785} 2002/08/19
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785} 2005/03/07
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782} 2006/11/27
Updated Instruction For The Bypass Harness {0785, 1408} 2008/03/17
New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606} 2013/08/15

The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785} 2004/04/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408} 2006/03/20
Enhanced Voltmeter Leads Are Now Available {0785} 2006/02/13
Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785} 2006/10/01

Procedure to Access the License Information for Caterpillar Electronic Technician (CAT ET){0785} Procedure to Access the License Information for Caterpillar Electronic Technician (CAT ET){0785}
An Aid To Reading Multimeter Scales{0785} An Aid To Reading Multimeter Scales{0785}

348-5430 Multi-Tool Gp 2 {0709, 0769, 0785} 348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
317-7484 Communications Adapter 3{1900, 4800, 7490, 7600} 317-7484 Communications Adapter 3{1900, 4800, 7490, 7600}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553} Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the Communications Adapter 3{1900} Using the Communications Adapter 3{1900}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709} 146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709} Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709} 131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
VALVE GP

Boom Lowering Control Valve - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems
WIRING GP

System Schematic Machine Security System
Electrical Connector - Inspect Machine Security System
Electrical Connector - Inspect Product Link - PL522/523
Wiring Harness (Open Circuit) - Test Product Link - PL522/523
Wiring Harness (Short Circuit) - Test Product Link - PL522/523
Electrical Connector - Inspect Product Link 121S/300
Wiring Harness (Open Circuit) - Test Product Link 121S/300
Wiring Harness (Short Circuit) - Test Product Link 121S/300

Electrical Component and Connector Locations Machine Security System

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553} 2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553} 2006/11/13
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408} 2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408} 2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556} 2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459} 2012/09/21

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408} 2010/05/13

Service Hour Meter 303.5 Mini Hydraulic Excavator
Window Wiper and Washer Control - If Equipped 303.5 Mini Hydraulic Excavator
Power Receptacle 303.5 Mini Hydraulic Excavator

Cross-Reference for Electrical Connectors{7553} Cross-Reference for Electrical Connectors{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553} Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Guidelines for Routing and Installing Wire Harness Assemblies{1408, 7553} Guidelines for Routing and Installing Wire Harness Assemblies{1408, 7553}
Repair Procedure for Damaged Harness Wiring{1408} Repair Procedure for Damaged Harness Wiring{1408}

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408} Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
ELECTRONICS GP-MONITOR

New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link 522 Systems {7494, 7606, 7620} 2012/10/03
ELECTRONICS GP-COMMUNICATION

System Overview Product Link 121S/300
System Overview Product Link - PL522/523
System Components Product Link - PL522/523
Configuration Product Link - PL522/523
Installation Parameters Configure Product Link - PL522/523
Spare Input Configure Product Link - PL522/523
Commands Product Link - PL522/523
System Components Product Link 121S/300
Spare Inputs Product Link 121S/300
Configuration Product Link 121S/300
Installation Parameters Configure Product Link 121S/300
Report Parameters Configure Product Link 121S/300
Wireless Service Configure Product Link 121S/300
Spare Input Configure Product Link 121S/300
Commands Product Link 121S/300

Electronic Control Module (ECM) - Flash Program Product Link - PL522/523
Electronic Control Module (ECM) - Replace Product Link - PL522/523
Specifications Product Link - PL522/523
Electronic Control Module (ECM) - Flash Program Product Link 121S/300
Electronic Control Module (ECM) - Replace Product Link 121S/300
Specifications Product Link 121S/300

General Information Product Link - PL522/523
Diagnostic Capabilities Product Link - PL522/523
Electronic Service Tool Does Not Communicate with ECM Product Link - PL522/523
Reports and Messages Not Available Product Link - PL522/523
Position Reports Not Available Product Link - PL522/523
Reporting Interval Erratic Product Link - PL522/523
Diagnostics and Events Not Available Product Link - PL522/523
Operating Hours Discrepancy Product Link - PL522/523
Diagnostic Code List Product Link - PL522/523
MID 161 - CID 0254 - FMI 04 Product Link - PL522/523
MID 161 - CID 0254 - FMI 12 Product Link - PL522/523
MID 161 - CID 1250 - FMI 09 Product Link - PL522/523
MID 161 - CID 1888 - FMI 14 Product Link - PL522/523
MID 161 - CID 3766- FMI 14 Product Link - PL522/523
General Information Product Link 121S/300
Diagnostic Capabilities Product Link 121S/300
Electronic Service Tool Does Not Communicate with ECM Product Link 121S/300
Position Reports Not Available Product Link 121S/300
Reporting Interval Erratic Product Link 121S/300
Diagnostics and Events Not Available Product Link 121S/300
Operating Hours Discrepancy Product Link 121S/300
Diagnostic Code List Product Link 121S/300
MID 122 - CID 0254 - FMI 04 Product Link 121S/300
MID 122 - CID 0254 - FMI 12 Product Link 121S/300
MID 122 - CID 1250 - FMI 09 Product Link 121S/300
ECM Does Not Communicate with User Interface Product Link 121S/300

New Flash File Software Is Used for Product Link 151/201 {7606, 7620} 2002/07/15
New Flexible Antenna Whip Available for Product Link {7606} 2002/12/02
New Software Available for Product Link {7606, 7620} 2006/10/16
New Product Link Hardware Is Now Available {7606} 2008/03/17
New Software for Product Link is Now Available {7606, 7620} 2008/03/10
New Software for Product Link is Now Available {7606, 7620} 2008/05/19
New Software is Now Used for the Product Link PL121SR and PL321SR Systems {7606, 7620} 2009/10/15
New Software for Product Link (PL300) Is Now Available {7606, 7620} 2011/10/11
New Software Is Now Available for Product Link (PL 121) {7602, 7610, 7620} 2011/12/15
Improved Process for Activating Product Link PL522 On Assets In China {7606} 2012/11/19
Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606} 2013/11/27
New Software Is Now Available For Product Link 522 Systems On All Cat<SUP>&reg;</SUP> Products {7606, 7620} 2013/04/22
Improved VisionLink<SUP>TM</SUP>Store is Now Available for all Caterpillar Products {7606} 2013/03/29
Device Transfers Are Now Supported In VisionLink<SUP>TM</SUP> Store {7606} 2013/03/29
Improved VisionLink<SUP>TM</SUP> Store for Minimizing Delay in Appearance of VisionLink Store - Modules is Now Available for All Caterpillar Products {7606} 2013/03/29
New Product Link Software for PL121 and PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7610, 7620} 2013/05/02
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link 522 System {7606} 2013/07/22
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620} 2013/07/08
New Software Is Now Available For All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620} 2013/08/19
Procedure for Improving Antenna Communication on All Machines Equipped With Product Link {733B, 7606} 2013/11/08
Improvements for Products and Systems Connected to Product Link {7606} 2013/10/02
New Product Link Software for PL300 Is Now Available for All Cat <SUP>&reg;</SUP>Products {7606, 7620} 2013/10/21
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link PL421 or Product Link PL420 System {7606} 2013/10/02
Improved Product Link Satellite System Special Instruction guide {7606} 2013/12/20
New Software for Product Link PL522 Module Is Now Available {7606} 2014/04/18

General Hazard Information Product Link - 121SR/321SR/420/421/ 522/523
Safety Signs and Labels Product Link - 121SR/321SR/420/421/ 522/523

Installation Guide for Product Link PL121SR and PL321{7606} Installation Guide for Product Link PL121SR and PL321{7606}
Operation of Product Link{7606} Operation of Product Link{7606}
Product Link PL121SR{7606} Product Link PL121SR{7606}
Release Notes for VisionLink and VisionLink Store for All Caterpillar Products{7606} Release Notes for VisionLink and VisionLink Store for All Caterpillar Products{7606}

Product support program for updating software on all machines equipped with PL121s and PL321s Product Link Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321). PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR
PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING SOFTWARE ON THE PRODUCT LINK 300 MODULE FOR CERTAIN CATERPILLAR PRODUCTS PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING SOFTWARE ON THE PRODUCT LINK 300 MODULE FOR CERTAIN CATERPILLAR PRODUCTS

Product Link PL321 May Accumulate 24 Hours Daily{7606} Product Link PL321 May Accumulate 24 Hours Daily{7606}
Registration of Product Link in EquipmentManager{7606} Registration of Product Link in EquipmentManager{7606}
Location Updates Are Not Being Reported From The Product Link PL321{7606} Location Updates Are Not Being Reported From The Product Link PL321{7606}
Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat<SUP>&reg;</SUP> Machines Equipped With VIMS3G{7601, 7620} Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat® Machines Equipped With VIMS3G{7601, 7620}
CAMERA GP

Generic Installation of the WAVS Cleaning System{7348} Generic Installation of the WAVS Cleaning System{7348}
ENGINE ARRANGEMENT
ENGINE AR

Engine Design 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Troubleshooting 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Engine - Remove 303.5 Mini Hydraulic Excavator
Engine - Install 303.5 Mini Hydraulic Excavator

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000} 2001/01/08
Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000} 2012/08/28
A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000} 2002/03/25
Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000} 2009/04/27
Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000} 2013/04/17
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570} 2011/02/17

Improved Registration Process for Retrofit Products {1000, 7000} 2011/04/15

Storage Procedure For Caterpillar Products{0355, 1000, 7000} Storage Procedure For Caterpillar Products{0355, 1000, 7000}
Instructions to Register the Retrofit{1000, 3000, 7000, 7570} Instructions to Register the Retrofit{1000, 3000, 7000, 7570}

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752} A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000} 142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562} HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
TOOLS

New Kits Are Available to Repair Cracks and Threads in Ductile Iron {0676, 0685} 2006/02/06

Using Lock-N-Stitch Procedures for Casting Repair{0676, 0685} Using Lock-N-Stitch Procedures for Casting Repair{0676, 0685}
FRAME AND BODY
COUNTERWEIGHT GP

Counterweight - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems
FRAME GP

The Skirt Plate on the Swing Frame of the Mini Hydraulic Excavators are now Serviceable {6506} 2003/02/10
New Linkage Pins with a Larger Diameter will give Reduced Radial Clearance {6000, 6501, 6502, 6544, 7051} 2004/07/26
Expander Pins Are Available {6501, 6506, 6507, 7051} 2003/01/27

Swing Frame and Cylinder Bearings - Lubricate 303.5 Mini Hydraulic Excavator
Undercarriage - Check 303.5 Mini Hydraulic Excavator

PRODUCT SUPPORT PROGRAM FOR ADDING EXPANDER PIN KITS IN WORN STATIC BORES ON CERTAIN 301.5, 301.6, 301.8, 302.5, 303.5 AND 304.5 MINI-EXCAVATORS PRODUCT SUPPORT PROGRAM FOR ADDING EXPANDER PIN KITS IN WORN STATIC BORES ON CERTAIN 301.5, 301.6, 301.8, 302.5, 303.5 AND 304.5 MINI-EXCAVATORS
GEAR & BEARING GP

Swing Gear and Bearing 303.5 Mini Hydraulic Excavator

Swing Gear and Bearing - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems

Swing Gear - Lubricate 303.5 Mini Hydraulic Excavator
Swing Bearing - Lubricate 303.5 Mini Hydraulic Excavator
GUARD GP

Bottom Guard - Remove and Install 303.5 Mini Hydraulic Excavator

Guards - Operator Protection 303.5 Mini Hydraulic Excavator
HOOD GP

Hood - Remove and Install 303.5 Mini Hydraulic Excavator
SEAL GP

Assembly and Installation of Inverted Duo-Cone Seals{7561} Assembly and Installation of Inverted Duo-Cone Seals{7561}
TOOLS

148-0357 Front Strut Handling Group {0374, 0599, 0632, 0700, 0756} 148-0357 Front Strut Handling Group {0374, 0599, 0632, 0700, 0756}
FUEL SYSTEM
FILTER GP-FUEL

Fuel Filter and Water Separator - Remove and Install 303.5 Mini Hydraulic Excavator
Fuel Filter Base - Remove 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Fuel Filter Base - Disassemble 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Fuel Filter Base - Assemble 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Fuel Filter Base - Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263} 2007/07/30
New Primary Fuel Filters are Available {1260, 1261} 2008/07/14

Fuel System Priming Pump - Operate 303.5 Mini Hydraulic Excavator

Installation of Fuel/Water Separator{1260, 1263} Installation of Fuel/Water Separator{1260, 1263}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348} Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}

295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280} 295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
FUEL SYSTEM GP
370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280} 284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280} 284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713} Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706} 169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
LINES GP-FUEL INJECTION

Fuel Injection Lines 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Fuel Injection Lines - Remove and Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254} 2008/12/01
PUMP GP-FUEL INJECTION

Fuel Injection Pump 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Fuel Injection Timing - Check 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Fuel Injection Pump - Remove 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Fuel Injection Pump - Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Support for Fuel Injection Pumps {1251} 2008/07/14

Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286} Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
PUMP GP-FUEL PRIMING

An Improved Hand Operated Fuel Priming Pump Is Available {1258} 2012/10/04

An Improved Hand Operated Fuel Priming Pump Is Available {1258} 2012/11/26

An Improved Hand Operated Fuel Priming Pump Is Available {1258} 2012/10/08
PUMP GP-FUEL TRANSFER

Fuel Transfer Pump - Remove 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Fuel Transfer Pump - Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
SEPARATOR GP-WATER

Fuel System Water Separator Element - Replace 303.5 Mini Hydraulic Excavator
Fuel System Water Separator - Drain 303.5 Mini Hydraulic Excavator
TANK GP-FUEL

Fuel Tank - Remove 303.5 Mini Hydraulic Excavator Machine Systems
Fuel Tank - Install 303.5 Mini Hydraulic Excavator Machine Systems

Updated Fuel Tank Caps Are Now Available {1273} 2004/03/15
Updated Fuel Tank Caps Are Now Available {1273} 2013/03/22
An Improved Fuel Cap is Available {1273} 2005/06/27
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000} 2005/12/19

Fuel Tank Cap and Strainer - Clean 303.5 Mini Hydraulic Excavator
Fuel Tank Water and Sediment - Drain 303.5 Mini Hydraulic Excavator
TOOLS

9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706} 9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280} Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
HYDRAULIC SYSTEM
ACCUMULATOR GP

Pilot and Travel Speed Manifold 303.5 Mini Hydraulic Excavator

Accumulator (Hydraulic Pilot) - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems

Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474} Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
COOLER GP

Hydraulic Oil Cooler - Remove 303.5 Mini Hydraulic Excavator
Hydraulic Oil Cooler - Install 303.5 Mini Hydraulic Excavator
COUPLING GP

Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057} 2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057} 2004/06/28
CYLINDER GP

Load Control Valve (Boom) 303.5 Mini Hydraulic Excavator
Blade Cylinder 303.5 Mini Hydraulic Excavator
Boom Cylinder 303.5 Mini Hydraulic Excavator
Boom Swing Cylinder 303.5 Mini Hydraulic Excavator
Bucket Cylinder 303.5 Mini Hydraulic Excavator
Stick Cylinder 303.5 Mini Hydraulic Excavator

Load Control Valve (Boom) - Test and Adjust 303.5 Mini Hydraulic Excavator

Blade Cylinder - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems
Bucket Cylinder - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems
Stick Cylinder - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems
Boom Cylinder - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems
Boom Swing Cylinder - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems

Serviceable Parts for Cylinders on Mini Hydraulic Excavators {5102, 5456, 5457, 5458, 6544} 2006/04/17
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562} 2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562} 2010/04/30

Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562} Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562} Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562} Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process{7562} Hydraulic Cylinder Repair Process{7562}
Hydraulic Cylinder Honing{7562} Hydraulic Cylinder Honing{7562}

Surface Finishes of Cylinder Bores{7562} Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562} Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738} Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 250-6597 Cylinder Washer Tank Group {0374, 0599, 0680, 0738} Procedures for Using the 250-6597 Cylinder Washer Tank Group {0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562} 1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562} Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095} 4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738} Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738} Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Hydraulic Cylinder Seal Failure Analysis{7555, 7562} Hydraulic Cylinder Seal Failure Analysis{7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components{7562} Inspection and Salvage of Hydraulic Cylinder Components{7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders{5100, 7562} Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders{5100, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562} Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
FILTER GP

Hydraulic Tank 303.5 Mini Hydraulic Excavator

A Replacement Filter Is Incorrectly Identified {5050, 5068} 2002/12/23
Optional High Efficiency Filters Are Now Available {3004, 5068} 2003/07/07
New Filter Group Available for Kidney Loop Filtering the Hydraulic System {0738} 2004/02/16

Hydraulic System Oil Filter (Return) - Replace 303.5 Mini Hydraulic Excavator

Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579} Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095} 188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
FITTING GP

Warranty Information Changes for the Quick Disconnect Connectors {0618, 5057, 6129} 2009/01/26

Modes of Failure for Quick Disconnect Connectors {0618, 5057, 6129} Modes of Failure for Quick Disconnect Connectors {0618, 5057, 6129}
LINES GP

The 6V-8633 Connector Has Changed {5057, 7553} 2005/11/28

358-4530, 358-4532, and 358-4533 Hose Machine Group Set-Up and Operation{0599, 0684} 358-4530, 358-4532, and 358-4533 Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057} Crimputer III Setup and Operation{0684, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057} Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057} Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057} Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057} 243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
LINES GP-HYDRAULIC

Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057} 2006/02/13

Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057} Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}

242-3567 Variable Crimp Die Bowl{0684} 242-3567 Variable Crimp Die Bowl{0684}
MANIFOLD GP

Pilot and Travel Speed Manifold 303.5 Mini Hydraulic Excavator
MOTOR GP
Gerotor Motor (Swing) 303.5 Mini Hydraulic Excavator

Gerotor Motor (Swing) 303.5 Mini Hydraulic Excavator

Gerotor Motor (Swing) - Test 303.5 Mini Hydraulic Excavator

Gerotor Motor (Swing) - Remove 303.5 Mini Hydraulic Excavator Machine Systems
Gerotor Motor (Swing) - Install 303.5 Mini Hydraulic Excavator Machine Systems
Gerotor Motor (Swing) - Disassemble 303.5 Mini Hydraulic Excavator Machine Systems
Gerotor Motor (Swing) - Assemble 303.5 Mini Hydraulic Excavator Machine Systems

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors{3203, 4351, 5058, 5070} Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors{3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070} Test Specifications for Vane Cartridges{0784, 5058, 5070}

Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551} Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11){5061, 506G, 5073} Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11){5061, 506G, 5073}

Pump and Motor Test Bench Course Description{0314, 0374, 5058, 5070} Pump and Motor Test Bench Course Description{0314, 0374, 5058, 5070}
Lesson Plan for Pump and Motor Test Bench Curriculum{0314, 0374, 5058, 5070} Lesson Plan for Pump and Motor Test Bench Curriculum{0314, 0374, 5058, 5070}
Pump and Motor Test Bench Curriculum{0374, 5058, 5070} Pump and Motor Test Bench Curriculum{0374, 5058, 5070}
PUMP GP

Piston and Gear Pump 303.5 Mini Hydraulic Excavator

Piston and Gear Pump 303.5 Mini Hydraulic Excavator

Piston and Gear Pump - Test and Adjust 303.5 Mini Hydraulic Excavator

Piston and Gear Pump - Remove 303.5 Mini Hydraulic Excavator Machine Systems
Pump Mounting Housing and Flange - Remove and Install 303.5 Mini Hydraulic Excavator
Piston and Gear Pump - Install 303.5 Mini Hydraulic Excavator Machine Systems
Gear Pump - Remove 303.5 Mini Hydraulic Excavator Machine Systems
Gear Pump - Install 303.5 Mini Hydraulic Excavator Machine Systems
Piston Pump - Remove 303.5 Mini Hydraulic Excavator Machine Systems
Piston Pump - Install 303.5 Mini Hydraulic Excavator Machine Systems
Piston Pump - Disassemble 303.5 Mini Hydraulic Excavator Machine Systems
Piston Pump - Assemble 303.5 Mini Hydraulic Excavator Machine Systems

Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084} 2005/04/25

Vane Type Hydraulic Pumps{5055} Vane Type Hydraulic Pumps{5055}

Bench Test Procedure for Vane Pumps{5055} Bench Test Procedure for Vane Pumps{5055}
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
PUMP GP-METERING

New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312} 2010/08/19
SWIVEL GP

Swivel 303.5 Mini Hydraulic Excavator

Swivel - Remove 303.5 Mini Hydraulic Excavator Machine Systems
Swivel - Disassemble 303.5 Mini Hydraulic Excavator Machine Systems
Swivel - Assemble 303.5 Mini Hydraulic Excavator Machine Systems
Swivel - Install 303.5 Mini Hydraulic Excavator Machine Systems
TANK GP
Hydraulic Tank - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems

Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738} 2004/03/29

Hydraulic System Oil - Change 303.5 Mini Hydraulic Excavator
Hydraulic System Oil Level - Check 303.5 Mini Hydraulic Excavator

204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068} 204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
TOOLS

New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738} 2004/05/03
Remove Certain 6D-7726 Hose Assemblies from Inventory {0738} 2005/12/12

Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050} 2010/10/01

Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050} 2010/09/10

Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center{0784} Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center{0784}

9U-5000 Series Hydraulic Test Bench {0599, 0738} 9U-5000 Series Hydraulic Test Bench {0599, 0738}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738} 4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY} TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057} Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057} Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
VALVE GP-BANK

Bank Valve and Mounting 303.5 Mini Hydraulic Excavator

Bank Valve 303.5 Mini Hydraulic Excavator

Bank Valve - Remove 303.5 Mini Hydraulic Excavator Machine Systems
Bank Valve - Install 303.5 Mini Hydraulic Excavator Machine Systems
Bank Valve - Disassemble 303.5 Mini Hydraulic Excavator Machine Systems
Bank Valve - Assemble 303.5 Mini Hydraulic Excavator Machine Systems
VALVE GP-CONTROL

Pilot Valve (Joystick) 303.5 Mini Hydraulic Excavator

Relief Valve (Main) - Test and Adjust 303.5 Mini Hydraulic Excavator
Relief Valve (Line) - Test and Adjust 303.5 Mini Hydraulic Excavator
VALVE GP-FLOW CONTROL

Work Tool Flow Control 303.5 Mini Hydraulic Excavator
VALVE GP-LOAD CONTROL

Solenoid Valve (Work Tool Lowering) 303.5 Mini Hydraulic Excavator

Solenoid Valve (Work Tool Lowering) 303.5 Mini Hydraulic Excavator

Correct Operation of Load Control Valves on Mini Hydraulic Excavators {5811} 2006/08/07
VALVE GP-PILOT

Pilot Valve (Joystick) 303.5 Mini Hydraulic Excavator

Pilot Valve (Joystick) - Remove 303.5 Mini Hydraulic Excavator Machine Systems
Pilot Valve (Joystick) - Disassemble 303.5 Mini Hydraulic Excavator Machine Systems
Pilot Valve (Joystick) - Assemble 303.5 Mini Hydraulic Excavator Machine Systems
Pilot Valve (Joystick) - Install 303.5 Mini Hydraulic Excavator Machine Systems
VALVE GP-RELIEF

Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117} Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
IMPLEMENTS
BOOM GP

Boom - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems

Boom and Stick Linkage - Lubricate 303.5 Mini Hydraulic Excavator
Boom/Stick/Bucket Combinations 303.5 Mini Hydraulic Excavator
LINKAGE GP

Bucket Linkage - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems

Bucket Linkage - Lubricate 303.5 Mini Hydraulic Excavator
STICK GP

Stick - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems

A New Solid Stick Pin is Available {6502, 6533} 2006/10/30
LUBRICATION SYSTEM
FILTER GP-ENGINE OIL

Engine Oil Filter 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
LINES GP-ENGINE OIL
Engine Oil Lines 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Engine Oil Relief Valve - Remove and Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
PUMP GP-ENGINE OIL

Engine Oil Pump 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Engine Oil Pump - Inspect 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines

Engine Oil Pump - Remove 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
Engine Oil Pump - Install 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
VALVE GP-RELIEF

Engine Oil Relief Valve 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines
MACHINE ARRANGEMENT
MACHINE AR

Slope Operation 303.5 Mini Hydraulic Excavator

General Welding Procedures{0679, 7000} General Welding Procedures{0679, 7000}
TOOLS

A New Backing Pad Is Available for the 127 mm (5 inch) Rotary Grinding Disc {0674, 0677, 0685} 2009/10/19

142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122} 142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122} 362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
Torque Multipliers, Models 1U-7293, 6V-7820 and 6V-6080{0599, 0765} Torque Multipliers, Models 1U-7293, 6V-7820 and 6V-6080{0599, 0765}
OPERATOR STATION
AIR CONDITIONER GP

Accumulator (Pilot) - Test and Charge 303.5 Mini Hydraulic Excavator

New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342} 2004/08/02
Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320} 2004/05/17
An Air Conditioner Kit for Use When Servicing the Air Conditioning System Is Now Available {7320, 7320} 2012/08/24

Receiver Dryer (Refrigerant) - Replace 303.5 Mini Hydraulic Excavator
BOX GP-STORAGE
Storage and Literature Compartment 303.5 Mini Hydraulic Excavator
CAB GP

Cab - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems

Thermal Insulation Panels Provide Increased Operator Comfort {7301} 2002/06/24
Update to the Operation and Maintenance Manual , "Tip-Over Protective Structure (TOPS) - Inspect" {7325} 2005/03/21
Ordering a Replacement Operator Protective Structure (OPS) Certification Film {7323, 7325, 7405, 7557} 2009/04/20
Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557} 2009/07/27
A Procedure for Replacing Bonded Windows on All Caterpillar Products Is Now Available {7310} 2009/11/02

Windows - Clean 303.5 Mini Hydraulic Excavator
Cab Air Filter (Fresh Air) - Clean/Replace 303.5 Mini Hydraulic Excavator
Tip-Over Protective Structure (TOPS) - Inspect 303.5 Mini Hydraulic Excavator

Replacing Bonded Windows{7310} Replacing Bonded Windows{7310}
CONSOLE GP

Engine Speed Control 303.5 Mini Hydraulic Excavator
Gauges 303.5 Mini Hydraulic Excavator
CONTROL GP-AIR & TEMPERATURE
Heating Control - If Equipped 303.5 Mini Hydraulic Excavator
CONTROL GP-HYDRAULIC
Blade Control 303.5 Mini Hydraulic Excavator
Joystick Controls 303.5 Mini Hydraulic Excavator
Hydraulic Activation Control 303.5 Mini Hydraulic Excavator
DOOR GP
Cab Door - If Equipped 303.5 Mini Hydraulic Excavator
HEATER GP

Cab Heater - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems
INDICATOR GP

New Gauges Available {7450} 2010/07/08
MIRROR GP

Mirror - If Equipped 303.5 Mini Hydraulic Excavator
MONITOR GP

Improved VisionLink<SUP>TM</SUP> Software Is Now Available for Certain Caterpillar Machines {7601} 2012/06/07
Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606} 2013/04/04

Indicators and Gauges - Test 303.5 Mini Hydraulic Excavator
Travel Speed Control 303.5 Mini Hydraulic Excavator

Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications){108F, 1091, 7490} Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications){108F, 1091, 7490}
RADIO GP

New Processes Improve Registration of Product Link {7338, 7606} 2008/04/14
A New Antenna For The Product Link Is Available {7010, 733T} 2008/06/09

Product Link Registration Problems{733T, 7606} Product Link Registration Problems{733T, 7606}

317-7492 Wireless Radio{7338} 317-7492 Wireless Radio{7338}
ROPS/FOPS GP

Inspection, Maintenance, and Repair of Operator Protective Structures (OPS) and Attachment Installation Guidelines for All Earthmoving Machinery, If Equipped{7323, 7325} Inspection, Maintenance, and Repair of Operator Protective Structures (OPS) and Attachment Installation Guidelines for All Earthmoving Machinery, If Equipped{7323, 7325}

Maintaining the Protective Structure (ROPS/FOPS) Certification when Making Modifications To (ROPS/FOPS){7323, 7325, 7715} Maintaining the Protective Structure (ROPS/FOPS) Certification when Making Modifications To (ROPS/FOPS){7323, 7325, 7715}
SEAT GP

Seat - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems

Seat Belt - Inspect 303.5 Mini Hydraulic Excavator
Seat Adjustment and Seat Belt Inspection 303.5 Mini Hydraulic Excavator
Seat Adjustment 303.5 Mini Hydraulic Excavator
Seat Belt - Replace 303.5 Mini Hydraulic Excavator
Seat Belt 303.5 Mini Hydraulic Excavator
WASHER GP-WINDOW

Washer Pump Assemblies Must Be Primed Properly {7306} 2007/08/06

Window Washer Reservoir - Fill 303.5 Mini Hydraulic Excavator
Window Wiper - Inspect/Replace 303.5 Mini Hydraulic Excavator
WINDOW GP

Improved Handle Assemblies for the Front Window Are Now Used {7310} 2004/12/13

Window (Front) - If Equipped 303.5 Mini Hydraulic Excavator
CONTROL GP-DIRECTION & SPEED

Speed and Direction Control 303.5 Mini Hydraulic Excavator

Travel Control 303.5 Mini Hydraulic Excavator
POWER TRAIN
AXLE GP

Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050} 2008/12/29

Specifications for Inspection of Driveline Fasteners{3030, 3101, 3159, 3253, 3258, 3278, 4050} Specifications for Inspection of Driveline Fasteners{3030, 3101, 3159, 3253, 3258, 3278, 4050}

Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines{0680, 0768, 3258, 3260, 4050} Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines{0680, 0768, 3258, 3260, 4050}
DIFFERENTIAL & BEVEL GEAR GP

226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561} 226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
DIFFERENTIAL GP
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561} 226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
DRUM GP
345-1236 Lifting Bracket{0599, 0629, 0632, 6605} 345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
FILTER GP

Understanding Transmission Filter Plugging Events {3004, 3067} 2007/04/02
MOTOR GP

Piston Motor (Travel) 303.5 Mini Hydraulic Excavator

Piston Motor (Travel) 303.5 Mini Hydraulic Excavator

Duo-Cone Conventional Seals - Install 303.5 Mini Hydraulic Excavator Machine Systems
Piston Motor (Travel) - Remove 303.5 Mini Hydraulic Excavator Machine Systems
Piston Motor (Travel) - Install 303.5 Mini Hydraulic Excavator Machine Systems
Piston Motor (Travel) - Assemble 303.5 Mini Hydraulic Excavator Machine Systems
Piston Motor (Travel) - Disassemble 303.5 Mini Hydraulic Excavator Machine Systems
SEAL GP-DUO-CONE

Final Drive Duo-Cone Seal Assembly Information Update {7561} 2010/04/15
SPROCKET GP

Sprocket 303.5 Mini Hydraulic Excavator

Final Drive Sprocket - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems
TOOLS

127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727} 127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
TORQUE CONVERTER GP

Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents{3030, 3101, 3133} Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents{3030, 3101, 3133}
TRANSMISSION GP
Thermal Spray Procedures for Clutch Piston Inside Diameter{0679, 3160, 3170} Thermal Spray Procedures for Clutch Piston Inside Diameter{0679, 3160, 3170}
DRIVE GP-FINAL

Final Drive Oil - Change 303.5 Mini Hydraulic Excavator
Final Drive Oil Level - Check 303.5 Mini Hydraulic Excavator
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMS

Ordering a Replacement Machine Identification Plate {7405, 7557} 2004/03/01
New ROPS Films, FOPS Films and TOPS Films Have Been Designed {7557} 2005/05/23

Updating the Certification Label for China{7557} Updating the Certification Label for China{7557}
GASKET & SEAL KITS

The Color of Certain O-Ring Seals Will Change {7555} 2002/12/09
The 1U-8846 Gasket Sealant Is Canceled {7555} 2011/02/02

The Color of Certain O-Ring Seals Is Changing {7555} 2002/12/01
The 1U-8846 Gasket Sealant Is Cancelled {7555} 2010/03/31

The Color of Certain O-Ring Seals Is Changing {7555} 2003/01/01
The 1U-8846 Gasket Sealant Is Cancelled {7555} 2010/03/22

Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555} Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
HARDWARE & SEALANTS

Chart for Heli-Coil Repair{0676} Chart for Heli-Coil Repair{0676}
LITERATURE GP

The Current Special Publication, PECP9067, "One Safe Source" Is Now Available Through The Internet {0374} 2002/05/13
Announcing the Combination of Groups Within the Paper Copies of the Caterpillar Parts Manuals {0374} 2002/06/03
The Contents Of The Service Manuals For All Caterpillar Machines Is Available On The Caterpillar Intranet {1000} 2002/12/02
"Tool and Shop Products Guide" by the Cat Service Technology Group (CSTG) Has Been Replaced by Two New Catalogs {0374} 2006/04/17

Caterpillar Service Welding Guide{0599, 0677, 0678, 0679} Caterpillar Service Welding Guide{0599, 0677, 0678, 0679}

Contents for Thermal Spray Reference Manual{0374, 0679} Contents for Thermal Spray Reference Manual{0374, 0679}
LUBRICANTS & FLUIDS

Managing Engine Oil Service Levels {1348} 2007/06/18
REBUILD & SALVAGE

1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679} 1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679}

Fundamentals of Arc Spray for Reconditioning Components{0679} Fundamentals of Arc Spray for Reconditioning Components{0679}
TOOLS

Cat Service Tools Releases New Hose Cutting Machine {0678, 0684} 2004/03/29
New Pry Bars Have Striking Caps on Handles {0607} 2004/03/29
Twist Impact Sockets Grip Fasteners as Torque is Applied {0601} 2004/04/01
249-2813 Water Filter Gp is Available for Shop Applications that Require Water Filtration {0699} 2004/07/05
210-6990 Pressure Gauge (LCD Display, 0 to 500-PSI) Is Available for Use by Technicians {0770} 2004/07/01
Lockout Valves Shut Off Air Supply in the Service Shop {0699} 2005/04/25
Disposable Dessicant Filter is Now Available {0618, 0646} 2006/02/13
Slide Sledge Heavy Equipment Repair Tools Are Now Available {0599, 0644} 2006/04/17
Use Only Cleaning Agents that are Water Based with the 212-1503 Parts Washer Kit {0680} 2006/10/02
Increased Support for Repair Parts is Available for Products that are sold by Dealer Service Tools from Advanced Technology Services {0599} 2008/04/14
Component Cleaners That Contain Trichloroethylene (TCE) Must Not Be Used On Electrical Connectors {0709} 2010/02/22

138-7573, 138-7574, 138-7575, 138-7576, 241-3790, and 241-3792 Link Bracket Assemblies{0632, 7063, 7063} 138-7573, 138-7574, 138-7575, 138-7576, 241-3790, and 241-3792 Link Bracket Assemblies{0632, 7063, 7063}
Compact DPF Cleaner{0599, 0701, 0702, 108F} Compact DPF Cleaner{0599, 0701, 0702, 108F}
Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200} Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200}
415-4055 Ultrasonic Wear Indicator IV Group{0787, 7000} 415-4055 Ultrasonic Wear Indicator IV Group{0787, 7000}

Procedure for Adding Filtration Capability to Solvent Stands{0680} Procedure for Adding Filtration Capability to Solvent Stands{0680}
WARRANTY

Provide Proper Documentation of Returned Parts within the Warranty Claim {1000} 2004/03/22
PROTECTION GP
An Improved Corporate Padlock Is Available {7430} 2004/03/22
KIT-REBUILD

1U-8846 Gasket Sealant Has Been Removed From 3N-5904 Gear Seal Kit {1000, 7000} 1U-8846 Gasket Sealant Has Been Removed From 3N-5904 Gear Seal Kit {1000, 7000}
STEERING SYSTEM
STEERING COLUMN GP
Procedure to Apply Dielectric Grease to the Horn (Cruise Control) Contact Ring{4310} Procedure to Apply Dielectric Grease to the Horn (Cruise Control) Contact Ring{4310}
UNDERCARRIAGE
IDLER GP

Recoil Spring 303.5 Mini Hydraulic Excavator

Front Idler and Track Adjuster - Remove 303.5 Mini Hydraulic Excavator Machine Systems
Front Idler and Track Adjuster - Install 303.5 Mini Hydraulic Excavator Machine Systems
Front Idler - Disassemble 303.5 Mini Hydraulic Excavator Machine Systems
Front Idler - Assemble 303.5 Mini Hydraulic Excavator Machine Systems

Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159} 2004/08/16

Installation of Conventional Duo-Cone Seals{7561} Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561} Installation of Inverted Duo-Cone Seals{7561}

Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180} Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
ROLLER GP

Track Roller 303.5 Mini Hydraulic Excavator

Track Roller - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems
Track Carrier Roller - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems
SPRING GP
Recoil Spring - Remove 303.5 Mini Hydraulic Excavator Machine Systems
Recoil Spring - Install 303.5 Mini Hydraulic Excavator Machine Systems
TRACK ADJUSTER & RECOIL GP
Track Adjuster - Disassemble 303.5 Mini Hydraulic Excavator Machine Systems
Track Adjuster - Assemble 303.5 Mini Hydraulic Excavator Machine Systems
Recoil Spring - Assemble 303.5 Mini Hydraulic Excavator Machine Systems
Recoil Spring - Disassemble 303.5 Mini Hydraulic Excavator Machine Systems

Track Adjustment - Adjust 303.5 Mini Hydraulic Excavator
Track Information 303.5 Mini Hydraulic Excavator
Track Adjustment - Inspect 303.5 Mini Hydraulic Excavator
TRACK GP

Track 303.5 Mini Hydraulic Excavator

Track - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems

Rubber Belt Track Operation - If Equipped 303.5 Mini Hydraulic Excavator
Track (Rubber) - Inspect/Replace - If Equipped 303.5 Mini Hydraulic Excavator

Evaluating the Condition of Rubber Tracks{4198} Evaluating the Condition of Rubber Tracks{4198}
Track Failure Mode Information{4170, 4198} Track Failure Mode Information{4170, 4198}

168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787} 168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}

Mobil-Trac Systems/MTS {4198} Mobil-Trac Systems/MTS {4198}
FRAME GP-TRACK ROLLER

Undercarriage Frame - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems
WORK TOOLS
BLADE GP
Blade - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems

Blade Operation 303.5 Mini Hydraulic Excavator
Blade Linkage - Lubricate 303.5 Mini Hydraulic Excavator
BUCKET GP

Bucket - Remove and Install 303.5 Mini Hydraulic Excavator Machine Systems

Quick Coupler - Lubricate - If Equipped 303.5 Mini Hydraulic Excavator
Coupler Operation 303.5 Mini Hydraulic Excavator

Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800} Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
COUPLER GP-QUICK

A New Coupler Uses Single Pin To Increase Reliability {6129} 2004/01/19
An Improved Pin Lock Group for Quick Couplers is Now Available {6129, 6700} 2005/04/04

Quick Coupler - Clean - Early Type with Two Locking Pins 303.5 Mini Hydraulic Excavator

Inspection and Maintenance of the Manual Pin Grabber Quick Coupler for Mini Hydraulic Excavators and Skid Steer Loader Backhoes{6129, 6504, 7000} Inspection and Maintenance of the Manual Pin Grabber Quick Coupler for Mini Hydraulic Excavators and Skid Steer Loader Backhoes{6129, 6504, 7000}

Quick Coupler to Bucket Interference Quick Coupler to Bucket Interference
GROUND ENGAGING TOOLS (G.E.T.)

A 30 Inch Auger Bit Is Now Available {6819, 6830, 7000} 2002/06/24

Bucket Tips - Inspect/Replace 303.5 Mini Hydraulic Excavator
Bucket Tips - Inspect/Replace - J200 Tips 303.5 Mini Hydraulic Excavator

398-6784 Recommended J Series Two Strap Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805} 398-6784 Recommended J Series Two Strap Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805} 398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805} 256-2928 Recommended K Series Two Strap Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805} 256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}

Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800} Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}

Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800} Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}