MINI HYD EXCAVATOR Caterpillar SIS online


MINI HYD EXCAVATOR
302.4D MINI HYD EXCAVATOR LJN



Select model MINI HYD EXCAVATOR:





Information:

(For parts list, you need select model above)

AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP

Engine Air Filter Primary and/or Secondary Element - Replace 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Engine Air Filter Service Indicator - Inspect 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
EXHAUST GP

Exhaust Manifold - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines


Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only{1000, 1091} Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only{1000, 1091}

319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D} 319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703} 188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
MUFFLER GP

Muffler - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Engine Supplement

TURBOCHARGER GP

Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines{1052, 1053} Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines{1052, 1053}
ASPHALT SPRAY SYSTEM
PUMP GP

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6){5061, 5073} Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6){5061, 5073}
BASIC ENGINE
CAMSHAFT GP

Camshaft and Valve Lifters - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

CRANKSHAFT GP

Main Bearing Journal 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Crankshaft Rear Seal - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

Crankshaft Pulley - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

Crankshaft Front Seal - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

Crankshaft and Main Bearings - Remove 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

Crankshaft and Main Bearings - Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

Bearing Clearance - Check 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines


420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230} 420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
CYLINDER BLOCK GP

Fuel Injection Nozzles 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Connecting Rod 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705} Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CYLINDER HEAD GP

Cylinder Head 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Engine Valve Lash - Inspect/Adjust 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Fuel Injection Nozzle - Test 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Rocker Arm and Shaft - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

Cylinder Head - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

Inlet and Exhaust Valves - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Springs - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Guides - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines


Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767} Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759} Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108} CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
DRIVE GP-FAN

Belt - Inspect 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
ENGINE GP

Oil and Your Engine{1000} Oil and Your Engine{1000}
FLYWHEEL GP

Flywheel 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Flywheel Housing 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Flywheel - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Engine Supplement

Flywheel - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

GEAR GP
Idler Gear - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

HOUSING GP-FLYWHEEL
Flywheel Housing - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

HOUSING GP-FRONT
Housing (Front) - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

Housing (Front) - Remove and Install - Internal 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

MOUNTING GP-ENGINE

Engine Mounting 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
PAN GP-OIL

Engine Oil Pan - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines


Engine Oil Level - Check 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Engine Oil and Filter - Change 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators

Obtaining Oil Sample for Analysis{1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542} Obtaining Oil Sample for Analysis{1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
PISTON & ROD GP

Compression - Test 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Pistons and Connecting Rods - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

Pistons and Connecting Rods - Disassemble 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

Pistons and Connecting Rods - Assemble 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

Connecting Rod Bearings - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines


Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines{1000, 1215} Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines{1000, 1215}
PUMP GP-GEAR

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3){5061, 5073} Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3){5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps{5073} Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps{5073}
SUPPRESSION GP-SOUND

Sound Suppression (Covers, Panels) - Inspect/Replace 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
TOOLS

Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000} Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
4C-9832 Large Engine Roll-Over Stand {0599, 0701} 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701} 9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781} Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738} 146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
VALVE MECHANISM GP

Valve Mechanism Cover - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

Rocker Arm - Disassemble 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

Rocker Arm - Assemble 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines


Engine Valve Lash - Check/Adjust 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
BRAKING SYSTEM
ACCUMULATOR GP

Accumulator Discharging and Charging Procedures{0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474} Accumulator Discharging and Charging Procedures{0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
BRAKE GP

149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551} 149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731} 193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
CYLINDER GP

Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562} Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
TOOLS

Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700} Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000} HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057} 4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700} Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
COOLING SYSTEM
COOLER GP

Oil Filter - Inspect 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
FAN GP

Fan - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Engine Supplement

LINES GP-WATER
Water Temperature Regulator - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Engine Supplement

Water Temperature Regulator - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines


Water Temperature Regulators (Thermostats) Have Been Redesigned {1355, 1380, 1393} 2013/04/17
PUMP GP-WATER

Water Pump - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Engine Supplement

Water Pump - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

RADIATOR GP
Radiator and Hydraulic Oil Cooler - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Engine Supplement


Coolant System - Flush 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Radiator Core - Clean 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Cooling System Coolant Level - Check 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
TOOLS

Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060} Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
DIFFERENTIAL STEERING SYSTEM
MOTOR GP

General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors{5058, 5070} General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors{5058, 5070}
PUMP GP

Repair Process for Hydraulic Gear Pumps{5073} Repair Process for Hydraulic Gear Pumps{5073}
ELECTRICAL AND STARTING SYSTEM
ALARM GP

Travel Alarm - Test 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
ALTERNATOR GP-CHARGING

Alternator - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Engine Supplement

Alternator - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines


Charging System Troubleshooting{1406} Charging System Troubleshooting{1406}
BATTERY GP

Battery Hold-Down - Tighten 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Battery - Recycle 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Battery or Battery Cable - Inspect/Replace 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Battery Electrolyte Level - Check 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Fuses - Replace 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
CONTROL GP-ELECTRONIC

New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat <SUP>&reg;</SUP> Products {7610, 7620} 2014/02/06

Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490} Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
ELECTRONICS GP-ENGINE

Engine Speed Control - Automatic (If Equipped) 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620} 2014/04/08

Procedure to Flash the ADEM 3 Engine Electronic Control Gp{1901, 1920} Procedure to Flash the ADEM 3 Engine Electronic Control Gp{1901, 1920}
ELECTRONICS GP-MACHINE

Auxiliary Hydraulic System 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Installation of the Machine Security System (MSS) Universal Attachment Kit{7631, 7631} Installation of the Machine Security System (MSS) Universal Attachment Kit{7631, 7631}
CONTROL GP-SPEED

Speed Control 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
ELECTRONICS GP

Specifications 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
GLOW PLUG GP

Glow Plugs - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

LIGHTING GP

Light - Test 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
MOTOR GP

254-0204 Phase and Motor Rotation Tester{0374, 0599, 0709, 0734} 254-0204 Phase and Motor Rotation Tester{0374, 0599, 0709, 0734}
SENSOR GP

Coolant Temperature Sensor - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

Engine Oil Pressure Sensor - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines


Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562} 2013/02/28
STARTING AID GP
A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456} 2013/09/24

Engine Starting 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
STARTING MOTOR GP

Starter Motor 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Electric Starting Motor - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Engine Supplement

Electric Starting Motor - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

SWITCH GP

Start Switch (Key) 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Engine Oil Pressure Switch - Test 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Coolant Temperature Switch - Test 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
TOOLS

New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606} 2013/08/15

Using the Communications Adapter 3{1900} Using the Communications Adapter 3{1900}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709} 146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709} Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709} 131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
WIRING GP

Cross-Reference for Electrical Connectors{7553} Cross-Reference for Electrical Connectors{7553}
Repair Procedure for Damaged Harness Wiring{1408} Repair Procedure for Damaged Harness Wiring{1408}
ELECTRONICS GP-MONITOR

New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link 522 Systems {7494, 7606, 7620} 2013/04/12
ELECTRONICS GP-COMMUNICATION
Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606} 2013/11/27
New Software Is Now Available For Product Link 522 Systems On All Cat<SUP>&reg;</SUP> Products {7606, 7620} 2013/04/22
Improved VisionLink<SUP>TM</SUP>Store is Now Available for all Caterpillar Products {7606} 2013/03/29
Device Transfers Are Now Supported In VisionLink<SUP>TM</SUP> Store {7606} 2013/03/29
Improved VisionLink<SUP>TM</SUP> Store for Minimizing Delay in Appearance of VisionLink Store - Modules is Now Available for All Caterpillar Products {7606} 2013/03/29
New Product Link Software for PL121 and PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7610, 7620} 2013/05/02
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link 522 System {7606} 2013/07/22
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620} 2013/07/08
New Software Is Now Available For All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620} 2013/08/19
Procedure for Improving Antenna Communication on All Machines Equipped With Product Link {733B, 7606} 2013/09/16
Improvements for Products and Systems Connected to Product Link {7606} 2013/10/02
New Product Link Software for PL300 Is Now Available for All Cat <SUP>&reg;</SUP>Products {7606, 7620} 2013/10/21
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link PL421 or Product Link PL420 System {7606} 2013/10/02
Improved Product Link Satellite System Special Instruction guide {7606} 2013/12/20
New Software for Product Link PL522 Module Is Now Available {7606} 2014/04/18

Installation Guide for Product Link PL121SR and PL321{7606} Installation Guide for Product Link PL121SR and PL321{7606}
Product Link PL121SR{7606} Product Link PL121SR{7606}
Release Notes for VisionLink and VisionLink Store for All Caterpillar Products{7606} Release Notes for VisionLink and VisionLink Store for All Caterpillar Products{7606}

Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat<SUP>&reg;</SUP> Machines Equipped With VIMS3G{7601, 7620} Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat® Machines Equipped With VIMS3G{7601, 7620}
ENGINE ARRANGEMENT
ENGINE AR

Engine - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Engine Supplement


Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000} 2013/04/17

Instructions to Register the Retrofit{1000, 3000, 7000, 7570} Instructions to Register the Retrofit{1000, 3000, 7000, 7570}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000} 142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562} HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
MISCELLANEOUS INFORMATION

Declaration of Conformity 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
TOOLS

Using Lock-N-Stitch Procedures for Casting Repair{0676, 0685} Using Lock-N-Stitch Procedures for Casting Repair{0676, 0685}
FRAME AND BODY
COUNTERWEIGHT GP

Counterweight 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Counterweight - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

DRIVE GP-SWING
Swing Motor and Swing Drive - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

FRAME GP

Upper Frame 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Upper Frame 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Support (Swing Boom) - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

Upper Frame and Undercarriage Frame - Separate and Connect 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems


Undercarriage - Check 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Undercarriage - Inspect 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Boom, Stick, and Frame - Inspect 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Swing Frame and Cylinder Bearings - Lubricate 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Adjustable Gauge Undercarriage Frame 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
GEAR & BEARING GP

Swing Gear and Bearing - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems


Swing Gear and Bearing - Lubricate 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
GUARD GP

Front Idler 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Guards - Operator Protection 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
SWING GP

Swing Hydraulic System 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Swing Motor and Swing Gear - Check 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
TOOLS

148-0357 Front Strut Handling Group {0374, 0599, 0632, 0700, 0756} 148-0357 Front Strut Handling Group {0374, 0599, 0632, 0700, 0756}
FUEL SYSTEM
FILTER GP-FUEL

Fuel Filter and Water Separator 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Fuel Filter and Water Separator 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Fuel Filter and Water Separator - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Engine Supplement


Fuel System Filter and Water Separator Element - Replace 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators

295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280} 295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
FUEL SYSTEM GP
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713} Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706} 169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
LINES GP-FUEL INJECTION

Fuel Injection Lines - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

NOZZLE AS-FUEL VALVE

Fuel Injection Nozzles - Check/Adjust 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
PUMP GP-FUEL INJECTION

Fuel Injection Pump 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Fuel Injection Timing - Check/Adjust 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Fuel Injection Pump - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

Fuel Injector - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines


Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286} Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
PUMP GP-FUEL TRANSFER

Fuel Transfer Pump - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Engine Supplement

SEPARATOR GP-WATER

Fuel System Water Separator - Drain 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
TANK GP-FUEL

Fuel Tank - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems


Updated Fuel Tank Caps Are Now Available {1273} 2013/03/22
An Improved Fuel Level Sender is Now Used on Certain Mini Hydraulic Excavators {1273} 2014/02/21

Fuel Tank Cap and Strainer - Clean 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Fuel Tank Water and Sediment - Drain 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
TOOLS

9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706} 9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280} Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
HYDRAULIC SYSTEM
ACCUMULATOR GP

Accumulator - Check 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
COUPLING GP

Pump Drive Coupling - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

CYLINDER GP

Blade Cylinder 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Boom Swing Cylinder 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Bucket Cylinder 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Stick Cylinder 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Boom Cylinder 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Cylinders (Boom, Stick and Bucket) 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Blade Hydraulic System 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Cylinder Drift - Check 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Blade Cylinder - Remove and Install - Long 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

Boom Cylinder - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

Stick Cylinder - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

Swing Boom Cylinder - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

Undercarriage Cylinder (Adjustable Gauge) - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

Bucket Cylinder - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems


Installation of Double Lip Wiper Seal{7562} Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process{7562} Hydraulic Cylinder Repair Process{7562}
Hydraulic Cylinder Honing{7562} Hydraulic Cylinder Honing{7562}

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738} Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 250-6597 Cylinder Washer Tank Group {0374, 0599, 0680, 0738} Procedures for Using the 250-6597 Cylinder Washer Tank Group {0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562} 1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562} Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095} 4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738} Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738} Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Hydraulic Cylinder Seal Failure Analysis{7555, 7562} Hydraulic Cylinder Seal Failure Analysis{7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components{7562} Inspection and Salvage of Hydraulic Cylinder Components{7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders{5100, 7562} Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders{5100, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562} Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
FILTER GP

Hydraulic System Oil Filter (Pilot) - Check/Replace 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Hydraulic System Oil Filter (Return) - Replace 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators

Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579} Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095} 188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
LINES GP
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057} Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057} Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057} Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057} 243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
LINES GP-HYDRAULIC

Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057} Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
LINES GP-PILOT

Relief Valve (Pilot) 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
MOTOR GP

Swing Motor 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Travel Motor 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Travel Counterbalance Valve 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Swing Motor 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Final Drive and Travel Motor - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

Final Drive and Travel Motor - Disassemble 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

Final Drive and Travel Motor - Assemble 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems


Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors{3203, 4351, 5058, 5070} Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors{3203, 4351, 5058, 5070}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11){5061, 506G, 5073} Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11){5061, 506G, 5073}

Pump and Motor Test Bench Curriculum{0374, 5058, 5070} Pump and Motor Test Bench Curriculum{0374, 5058, 5070}
PUMP GP

Main Hydraulic Pump Mounting 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Main Hydraulic Pump Mounting 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Main Hydraulic Pump 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Main Hydraulic Pump and Gear Pump (Pilot) - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems


Vane Type Hydraulic Pumps{5055} Vane Type Hydraulic Pumps{5055}
SWIVEL GP

Swivel 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Swivel - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

TANK GP

Hydraulic Tank 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Hydraulic Tank - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems


Hydraulic System Oil Level - Check 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Hydraulic System Oil - Change 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators

PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TANK FILTER SEAL ON CERTAIN 301.7D, 302.2D, AND 302.4D MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TANK FILTER SEAL ON CERTAIN 301.7D, 302.2D, AND 302.4D MINI HYDRAULIC EXCAVATORS
TOOLS

9U-5000 Series Hydraulic Test Bench {0599, 0738} 9U-5000 Series Hydraulic Test Bench {0599, 0738}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738} 4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY} TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057} Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057} Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
VALVE GP-BANK

Relief Valve (Line) 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
VALVE GP-CONTROL

Main Control Valve 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Main Control Valve 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Main Control Valve 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Relief Valve (Main) 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Relief Valve (Main) - Test and Adjust 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Relief Valve (Line) - Test and Adjust 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Ball Valve (Adjustable Undercarriage) - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

Main Control Valve - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

VALVE GP-FLOW CONTROL
Selector Valve (Alternate Pattern Control) - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems


Joystick Controls Alternate Patterns 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
VALVE GP-LOAD CONTROL
Equipment Lowering with Engine Stopped 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
VALVE GP-PILOT

Pilot Valve (Joystick) 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Implements and Swing Controls Alternate Patterns - If Equipped 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
VALVE GP-RELIEF

Main Relief Valve - Check 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
VALVE GP-SOLENOID

Solenoid Valve (Work Tool) 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Solenoid Valve (Work Tool) 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Control Valve (Speed) 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Solenoid Valve (Hydraulic Lockout) - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

IMPLEMENTS
BOOM GP

Boom 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Quick Coupler System - If Equipped 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Boom - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems


Boom, Stick and Bucket Linkage - Lubricate 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Boom/Stick/Bucket Combinations 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
LINKAGE GP

Bucket Linkage 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Bucket Linkage 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Bucket Linkage - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

STICK GP

Stick 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Stick 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Stick 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Stick - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

LUBRICATION SYSTEM
LINES GP-ENGINE OIL
Engine Oil Relief Valve - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

PUMP GP-ENGINE OIL
Engine Oil Pump - Remove and Install 3TNV70 and 3TNV76
Engines for Caterpillar Built Machines

MACHINE ARRANGEMENT
MACHINE AR

Fasteners - Check 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Visual Inspection 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Slope Operation 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators

General Welding Procedures{0679, 7000} General Welding Procedures{0679, 7000}
TOOLS

Torque Multipliers, Models 1U-7293, 6V-7820 and 6V-6080{0599, 0765} Torque Multipliers, Models 1U-7293, 6V-7820 and 6V-6080{0599, 0765}
OPERATOR STATION
BOX GP-STORAGE

Storage and Literature Compartment 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
CAB GP

Cab - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems


Windows - Clean 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Cab Air Filter (Fresh Air) - Clean/Replace 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Rollover Protective Structure (ROPS) - Inspect 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Work Tool Control 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators

Replacing Bonded Windows{7310} Replacing Bonded Windows{7310}
CONSOLE GP

Seat 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
CONTROL GP

Joystick Control 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Joystick Control - Remove and Install - Right Side 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

Joystick Control - Remove and Install - Left Side 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

CONTROL GP-HYDRAULIC

Joystick Controls 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
DOOR GP
Cab Door 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
HEATER GP

Cab Heater - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

HORN GP

Horn - Test 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
MIRROR GP
Mirror - If Equipped 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
MONITOR GP

Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606} 2013/04/04
PANEL GP

Trim - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

ROPS/FOPS GP

Maintaining the Protective Structure (ROPS/FOPS) Certification when Making Modifications To (ROPS/FOPS){7323, 7325, 7715} Maintaining the Protective Structure (ROPS/FOPS) Certification when Making Modifications To (ROPS/FOPS){7323, 7325, 7715}
SEAT GP

Armrest 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Armrest 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Seat - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems


Seat Belt - Inspect 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Seat Belt 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
WASHER GP-WINDOW
Window Wiper - Inspect/Replace 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Window Washer Reservoir - Fill 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
WINDOW GP
Window (Front) 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
POWER TRAIN
AXLE GP

Specifications for Inspection of Driveline Fasteners{3030, 3101, 3159, 3253, 3258, 3278, 4050} Specifications for Inspection of Driveline Fasteners{3030, 3101, 3159, 3253, 3258, 3278, 4050}

Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines{0680, 0768, 3258, 3260, 4050} Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines{0680, 0768, 3258, 3260, 4050}
DIFFERENTIAL & BEVEL GEAR GP

226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561} 226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
DRUM GP
345-1236 Lifting Bracket{0599, 0629, 0632, 6605} 345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
SPROCKET GP

Sprocket - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

TOOLS

127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727} 127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
TORQUE CONVERTER GP

Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents{3030, 3101, 3133} Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents{3030, 3101, 3133}
TRANSMISSION GP
Thermal Spray Procedures for Clutch Piston Inside Diameter{0679, 3160, 3170} Thermal Spray Procedures for Clutch Piston Inside Diameter{0679, 3160, 3170}
DRIVE GP-FINAL

Final Drive Oil - Change 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Final Drive Oil Level - Check 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMS
Film (Product Identification) - Clean 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators

A Travel Alarm Warning Film was Incorrectly Installed on Certain Mini Hydraulic Excavators{7405} A Travel Alarm Warning Film was Incorrectly Installed on Certain Mini Hydraulic Excavators{7405}
GASKET & SEAL KITS

Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555} Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
LITERATURE GP

Caterpillar Service Welding Guide{0599, 0677, 0678, 0679} Caterpillar Service Welding Guide{0599, 0677, 0678, 0679}

Contents for Thermal Spray Reference Manual{0374, 0679} Contents for Thermal Spray Reference Manual{0374, 0679}
LUBRICANTS & FLUIDS

Part Numbers for Coolant are Now Available for Certain Mini Hydraulic Excavators {1000, 1395} 2012/10/30
REBUILD & SALVAGE

1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679} 1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679}

Fundamentals of Arc Spray for Reconditioning Components{0679} Fundamentals of Arc Spray for Reconditioning Components{0679}
TOOLS

415-4055 Ultrasonic Wear Indicator IV Group{0787, 7000} 415-4055 Ultrasonic Wear Indicator IV Group{0787, 7000}
UNDERCARRIAGE
ADJUSTMENT GP-HYDRAULIC TRACK

Front Idler, Recoil Spring and Hydraulic Track Adjuster - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

BOGIE GP

Undercarriage - Frame Group 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
IDLER GP

Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180} Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
ROLLER GP

Track Roller - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

TENSIONER GP-TRACK

Track Tension Cylinder 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
TRACK ADJUSTER & RECOIL GP

Track Information 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Track Adjustment - Adjust 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Track Adjustment - Inspect 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
TRACK GP

Track - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems


Rubber Belt Track Operation 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators

168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787} 168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}

Mobil-Trac Systems/MTS {4198} Mobil-Trac Systems/MTS {4198}
FRAME GP

Undercarriage Frame (Adjustable Gauge) - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems

CYLINDER GP

Undercarriage Cylinder (Adjustable Gauge) 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
WORK TOOLS
BLADE GP

Blade and Mounting 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Blade and Mounting 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Blade - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems


Blade Operation 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Blade Linkage - Lubricate 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
BUCKET GP

Quick Coupler 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Bucket 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Bucket - Tool For Tiltable 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Bucket 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Tilt Link 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator
Quick Coupler 301.7D, 302.2D and 302.4D Mini Hydraulic Excavator

Bucket - Remove and Install 301.7D, 302.2D and 302.4D
Mini Hydraulic Excavators Machine Systems


Quick Coupler - Lubricate - If Equipped 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Quick Coupler Operation - Mechanical Pin Grabber Quick Coupler (If Equipped) 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Bucket - Remove and Install 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Quick Coupler Operation - Manual Pin Grabber Quick Coupler (If Equipped) 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Quick Coupler Operation - If Equipped 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators

Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800} Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
COUPLER GP-QUICK

Quick Coupler - Clean 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
GROUND ENGAGING TOOLS (G.E.T.)
Bucket Tips - Inspect/Replace 301.7D, 302.2D and 302.4D Mini Hydraulic Excavators

Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800} Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}

Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800} Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}





You can buy on Amazon: .