135H MOTOR GRADER Caterpillar parts catalog SIS online


OK request send
MOTOR GRADER
135H MOTOR GRADER CBC

MOTOR GRADER Caterpillar

Machinery model 135H:





Information:

(For parts list, you need select model above)

AIR INLET AND EXHAUST SYSTEM
AFTERCOOLER GP

Aftercooler - Test 3126B Engines for CaterpillarBuilt Machines

Radiator Guard and Support, Aftercooler, and Radiator - Remove 120H and 135H Motor Graders 3126B Engine Supplement
Aftercooler - Remove and Install 120H and 135H Motor Graders 3126B Engine Supplement
AIR CLEANER GP
Air Cleaner - Remove and Install 120H and 135H Motor Graders 3126B Engine Supplement

Engine Air Filter Service Indicator Screen - Check/Replace 120H and 135H Motor Graders
Engine Air Filter Primary Element - Clean/Replace 120H and 135H Motor Graders
Engine Air Precleaner - Clean 120H and 135H Motor Graders
Engine Air Filter Secondary Element - Replace 120H and 135H Motor Graders
Engine Air Filter Service Indicator - Inspect/Replace 120H and 135H Motor Graders
Engine Air Filter Service Indicator - Inspect 120H and 135H Motor Graders
Engine Power Loss 120H and 135H Motor Graders

Caterpillar Certified Procedure to Inspect and Clean Air Filters{1051, 1054} Caterpillar Certified Procedure to Inspect and Clean Air Filters{1051, 1054}
EXHAUST GP

Exhaust Manifold - Remove and Install 3126B Engines for Caterpillar Built Machines

A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091} 2003/12/15

Installation Guide for Particulate Trap Exhaust Filters{1091} Installation Guide for Particulate Trap Exhaust Filters{1091}
Diesel Particulate Filter Monitoring System{1091, 7490} Diesel Particulate Filter Monitoring System{1091, 7490}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only{1000, 1091} Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only{1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only{1000, 1091, 7490} Generation 3 DPFdm Diagnostic Module Installation Manual - California Only{1000, 1091, 7490}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091} Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498} Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D} 319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703} 188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
INLET GP-AIR

Air Inlet Elbow - Remove and Install 3126B Engines for Caterpillar Built Machines
LINES GP-AIR

Air Inlet Elbow 3126B Engine for Caterpillar Built Machines
MANIFOLD GP-EXHAUST
Exhaust Manifold 3126B Engine for Caterpillar Built Machines

Exhaust Temperature - Test 3126B Engines for CaterpillarBuilt Machines
MANIFOLD GP-INLET

Inlet Manifold - Internal Mounted Air Inlet Heater 3126B Engine for Caterpillar Built Machines

Inlet Manifold Pressure - Test 3126B Engines for CaterpillarBuilt Machines

Air Inlet Cover - Remove and Install 3126B Engines for Caterpillar Built Machines
MUFFLER GP

Muffler 120H and 135H Motor Graders Power Train

Muffler - Remove and Install 120H and 135H Motor Graders 3126B Engine Supplement
TURBOCHARGER GP

Turbocharger 3126B Engine for Caterpillar Built Machines
Turbocharger Inlet Pressure Sensor 3126B Engine for Caterpillar Built Machines

Turbocharger - Inspect 3126B Engines for CaterpillarBuilt Machines

Turbocharger - Remove 3126B Engines for Caterpillar Built Machines
Turbocharger - Disassemble 3126B Engines for Caterpillar Built Machines
Turbocharger - Assemble 3126B Engines for Caterpillar Built Machines
Turbocharger - Install 3126B Engines for Caterpillar Built Machines
Turbocharger - Remove and Install 120H and 135H Motor Graders 3126B Engine Supplement

A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052} 2003/02/24
Policy for Reusing the Turbocharger Turbine Housing {1065} 2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052} 2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307} 2006/02/06
Troubleshooting the Wastegate Canister {1052, 1057} 2009/01/26
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053} 2010/03/22

A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052} 2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053} 2010/03/22

A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052} 2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053} 2010/03/22

Instructions for the Service Replacement of the Turbochargers{1052} Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers{1052} Installation Instructions for Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines{1052, 1053} Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines{1052, 1053}

CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN 3116, 3126, C-7, C7, C-9, C9, 3306, 3406, C-15, AND 3412 ENGINE MODELS CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN 3116, 3126, C-7, C7, C-9, C9, 3306, 3406, C-15, AND 3412 ENGINE MODELS
AFTERTREATMENT GP

Additional Requirements Are Required for Emission Compliance on Replacement Engines {1000, 775E} 2012/09/11
ASPHALT SPRAY SYSTEM
PUMP GP

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6){5061, 5073} Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6){5061, 5073}
BASIC ENGINE
AIR COMPRESSOR GP

Alternator and Air Compressor Mounting Group 3126B Engine for Caterpillar Built Machines
Governor (Air Compressor) 120H and 135H Motor Graders Air System and Brakes

Air Compressor 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes

Air Compressor Governor - Test and Adjust 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes

Air Compressor - Remove and Install 120H and 135H Motor Graders 3126B Engine Supplement

Repair Guidelines for Air Compressors {1803} 2003/08/25
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803} 2004/11/15
A New Air Dryer is Available {1803, 4285} 2010/08/25
An Air Dryer is Available for the Air Compressor and the Governor Assembly {1803, 4285} 2008/09/08

An Air Dryer is Available for the Air Compressor and the Governor Assembly{1803, 4285} An Air Dryer is Available for the Air Compressor and the Governor Assembly{1803, 4285}
BELT TIGHTENER GP

Belt Tension Chart 3126B Engine for Caterpillar Built Machines
Belt Tensioner - If Equipped 3126B Engine for Caterpillar Built Machines

Belt Tensioner - Remove and Install 3126B Engines for Caterpillar Built Machines
Idler Pulley - Remove and Install 3126B Engines for Caterpillar Built Machines

Belt - Inspect 120H and 135H Motor Graders
Belt - Replace 120H and 135H Motor Graders
CAMSHAFT GP

Camshaft 3126B Engine for Caterpillar Built Machines

Excessive Bearing Wear - Inspect 3126B Engines for CaterpillarBuilt Machines

Camshaft Bearings - Remove and Install 3126B Engines for Caterpillar Built Machines
Camshaft Gear - Remove and Install 3126B Engines for Caterpillar Built Machines
Camshaft - Install 3126B Engines for Caterpillar Built Machines
Camshaft - Remove 3126B Engines for Caterpillar Built Machines

Spacer Installation is Now Recommended for Improved Oil Control on 3100 Camshaft Housing Covers {1210} 2003/01/06

Visual Inspection of Camshaft Roller Followers{1102, 1123, 1209} Visual Inspection of Camshaft Roller Followers{1102, 1123, 1209}

CAT REMAN ANNOUNCES ADDITIONAL Long Block/Short Block Options for 3126B and C7 Engines CAT REMAN ANNOUNCES ADDITIONAL Long Block/Short Block Options for 3126B and C7 Engines
CARRIER GP-SEAL

Crankshaft Rear Seal Carrier - Remove and Install 3126B Engines for Caterpillar Built Machines
CRANKSHAFT GP

Crankshaft Seals 3126B Engine for Caterpillar Built Machines
Crankshaft 3126B Engine for Caterpillar Built Machines
Connecting Rod Bearing Journal 3126B Engine for Caterpillar Built Machines
Main Bearing Journal 3126B Engine for Caterpillar Built Machines

Main Bearings - Inspect 3126B Engines for CaterpillarBuilt Machines

Bearing Clearance - Check 3126B Engines for Caterpillar Built Machines
Crankshaft - Remove 3126B Engines for Caterpillar Built Machines
Crankshaft - Install 3126B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove 3126B Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove 3126B Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install 3126B Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove 3126B Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install 3126B Engines for Caterpillar Built Machines
Crankshaft Wear Sleeve (Rear) - Install 3126B Engines for Caterpillar Built Machines
Crankshaft Wear Sleeve (Rear) - Remove - If Equipped 3126B Engines for Caterpillar Built Machines
Crankshaft Gear - Remove and Install 3126B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install 3126B Engines for Caterpillar Built Machines

Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160} 2011/09/20
There Is a New Maximum Temperature for 2W-8147 Gear {1204} 2003/08/04
Improved Gasket for the Rear Crankshaft Seal Carrier {1161} 2004/02/16
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202} 2006/01/16

420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230} 420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
CYLINDER BLOCK GP

Cylinder Block 3126B Engine for Caterpillar Built Machines
Piston Cooling Jet 3126B Engine for Caterpillar Built Machines
Cylinder Block Cover Group 3126B Engine for Caterpillar Built Machines
Piston Cooling Jet 3126B Engine for Caterpillar Built Machines

Cylinder Block - Inspect 3126B Engines for CaterpillarBuilt Machines

Piston Cooling Jets - Remove and Install 3126B Engines for Caterpillar Built Machines

Usage of Cylinder Head Gaskets{1124} Usage of Cylinder Head Gaskets{1124}

Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317} Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317} Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705} Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}

Specifications and Salvage for Cylinder Blocks on 3114, 3116, 3126 and 3126B Engines{1201} Specifications and Salvage for Cylinder Blocks on 3114, 3116, 3126 and 3126B Engines{1201}
CYLINDER HEAD GP

Cylinder Head Valves 3126B Engine for Caterpillar Built Machines
Cylinder Head 3126B Engine for Caterpillar Built Machines

Engine Valve Lash - Inspect/Adjust 3126B Engines for CaterpillarBuilt Machines

Unit Injector Sleeve - Remove 3126B Engines for Caterpillar Built Machines
Unit Injector Sleeve - Install 3126B Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install 3126B Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install 3126B Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install 3126B Engines for Caterpillar Built Machines
Cylinder Head - Install 3126B Engines for Caterpillar Built Machines
Cylinder Head - Remove 3126B Engines for Caterpillar Built Machines

Caterpillar Warranty Claims on Cylinder Head Valves {1105} 2005/10/03
Correct Procedures for Installing, Reaming and Coining Copper Sleeves {1100, 1101, 1713} 2008/04/07
A New Cylinder Head Gasket is Now Used {1100, 1124} 2008/12/29

Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767} Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759} Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459} 185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108} CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}

Engine Valve Failure Modes{1100, 1105} Engine Valve Failure Modes{1100, 1105}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100} Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Cylinder Head Assembly Specifications for 3114, 3116, and 3126 Engines{1100} Cylinder Head Assembly Specifications for 3114, 3116, and 3126 Engines{1100}
Thermal Spray Procedures for Cylinder Head{0679, 1100, 1101} Thermal Spray Procedures for Cylinder Head{0679, 1100, 1101}
DAMPER GP

Vibration Damper and Pulley 3126B Engine for Caterpillar Built Machines

Vibration Damper - Check 3126B Engines for CaterpillarBuilt Machines

Vibration Damper and Pulley - Remove and Install 3126B Engines for Caterpillar Built Machines

Crankshaft Vibration Damper - Inspect 120H and 135H Motor Graders
DRIVE GP-FAN

Fan Drive 3126B Engine for Caterpillar Built Machines
ENGINE GP

Troubleshooting Engine Vibration In Vehicular Equipment{1000} Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Oil and Your Engine{1000} Oil and Your Engine{1000}
FLYWHEEL GP

Flywheel 3126B Engine for Caterpillar Built Machines
Flywheel Housing 3126B Engine for Caterpillar Built Machines

Flywheel - Inspect 3126B Engines for CaterpillarBuilt Machines

Flywheel - Remove and Install 3126B Engines for Caterpillar Built Machines
GEAR GP

Gear Group (Front) 3126B Engine for Caterpillar Built Machines
Gear Group (Front) 3126B Engine for Caterpillar Built Machines

Gear Group (Front) - Time 3126B Engines for CaterpillarBuilt Machines

Camshaft Idler Gear - Remove and Install 3126B Engines for Caterpillar Built Machines

An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206} 2012/12/13

An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206} 2012/12/14
HOUSING GP-FLYWHEEL

Flywheel Housing - Inspect 3126B Engines for CaterpillarBuilt Machines

Flywheel Housing - Remove and Install 3126B Engines for Caterpillar Built Machines
HOUSING GP-FRONT

Front Housing and Covers 3126B Engine for Caterpillar Built Machines

Housing (Front) - Remove 3126B Engines for Caterpillar Built Machines
Housing (Front) - Install 3126B Engines for Caterpillar Built Machines
Front Cover - Remove 3126B Engines for Caterpillar Built Machines
Front Cover - Install 3126B Engines for Caterpillar Built Machines
MISCELLANEOUS INFORMATION

Intermittent Low Power or Power Cutout 3126B Engine for Caterpillar Built Machines
MOUNTING GP-ENGINE

Engine Support (Front) - Remove and Install 120H and 135H Motor Graders 3126B Engine Supplement
PAN GP-OIL

Engine Oil Pan 3126B Engine for Caterpillar Built Machines

Engine Oil Pan - Remove and Install 3126B Engines for Caterpillar Built Machines

The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555} 2003/07/21
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613} 2006/03/20

Engine Oil Level - Check 120H and 135H Motor Graders
Engine Oil Sample - Obtain 120H and 135H Motor Graders
Engine Oil and Filter - Change 120H and 135H Motor Graders

Obtaining Oil Sample for Analysis{1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542} Obtaining Oil Sample for Analysis{1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
PISTON & ROD GP

Piston and Rings 3126B Engine for Caterpillar Built Machines
Piston and Rings 3126B Engine for Caterpillar Built Machines
Connecting Rod 3126B Engine for Caterpillar Built Machines

Engine Crankcase Pressure (Blowby) - Test 3126B Engines for CaterpillarBuilt Machines
Connecting Rod Bearings - Inspect 3126B Engines for CaterpillarBuilt Machines
Piston Ring Groove - Inspect 3126B Engines for CaterpillarBuilt Machines
Compression - Test 3126B Engines for CaterpillarBuilt Machines

Pistons and Connecting Rods - Disassemble 3126B Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble 3126B Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install 3126B Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove 3126B Engines for Caterpillar Built Machines

Connecting Rods with Dual Bearing Tab Slots are OK to Use {1218} 2002/11/04
New Fractured Connecting Rod Has Been Released {1218} 2007/11/19
New Guidelines for Inspecting Pistons {1214} 2006/01/02

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines{1000, 1215} Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines{1000, 1215}

NEW FRACTURED SPLIT ROD IS CURRENTLY PRODUCTION RELEASED FOR THE C9, 3114, 3116 AND 3126 ENGINES NEW FRACTURED SPLIT ROD IS CURRENTLY PRODUCTION RELEASED FOR THE C9, 3114, 3116 AND 3126 ENGINES
PUMP GP-GEAR

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3){5061, 5073} Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3){5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps{5073} Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps{5073}

Bench Test Procedure for Gear Pumps{5073} Bench Test Procedure for Gear Pumps{5073}
TOOLS

Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000} Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000} Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
4C-9832 Large Engine Roll-Over Stand {0599, 0701} 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701} 9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781} Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738} 146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
VALVE MECHANISM GP

Valve Rocker Arms, Lifters, and Bridges 3126B Engine for Caterpillar Built Machines
Valve Mechanism Cover 3126B Engine for Caterpillar Built Machines

Finding Top Center Position for No. 1 Piston 3126B Engines for CaterpillarBuilt Machines

Rocker Shaft and Pushrod - Remove 3126B Engines for Caterpillar Built Machines
Rocker Shaft and Pushrod - Install 3126B Engines for Caterpillar Built Machines
Rocker Shaft - Disassemble 3126B Engines for Caterpillar Built Machines
Rocker Shaft - Assemble 3126B Engines for Caterpillar Built Machines
Valve Mechanism Cover Base - Remove and Install 3126B Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install 3126B Engines for Caterpillar Built Machines
Lifter Group - Remove and Install 3126B Engines for Caterpillar Built Machines

Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209} 2012/10/08

Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209} 2012/10/08

Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209} 2012/10/08

Engine Valve Rotators - Inspect 120H and 135H Motor Graders
Engine Valve Lash - Check 120H and 135H Motor Graders
BRAKING SYSTEM
ACCUMULATOR GP

Accumulator Discharging and Charging Procedures{0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474} Accumulator Discharging and Charging Procedures{0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
AIR DRYER GP

Air Dryer 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes

Air Dryer - Remove and Install 120H and 135H Motor Graders Machine Systems

Updated Air Dryers Have Improved Air Retention {4285} 2004/04/19

Air Dryer - Check 120H and 135H Motor Graders
Air Dryer Desiccant - Replace 120H and 135H Motor Graders
BRAKE GP

Parking Brake 120H and 135H Motor Graders Air System and Brakes
Air Control Valve (Parking Brake) 120H and 135H Motor Graders Air System and Brakes
Service Brakes 120H and 135H Motor Graders Air System and Brakes

Air Control Valve (Parking Brake) 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Service Brakes 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Parking Brake 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes

Parking Brake - Test 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Service Brakes - Test 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Brake Disc Wear - Check 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Bearing Preload for Service Brake - Adjust 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes

Service Brake (Wheel Spindle) - Remove 120H and 135H Motor Graders Power Train
Service Brake (Wheel Spindle) - Install 120H and 135H Motor Graders Power Train
Service Brake (Wheel Spindle) - Disassemble 120H and 135H Motor Graders Power Train
Parking Brake - Remove 120H and 135H Motor Graders Power Train
Parking Brake - Install 120H and 135H Motor Graders Power Train
Parking Brake - Disassemble 120H and 135H Motor Graders Power Train
Parking Brake - Assemble 120H and 135H Motor Graders Power Train
Service Brake (Wheel Spindle) - Assemble 120H and 135H Motor Graders Power Train

A New Piston is Now Used in Certain Motor Graders {3077, 4267} 2008/12/29

149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551} 149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731} 193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}

Procedure to Salvage Tang Slots on Transmission and Brake Pistons{0679, 3160, 4011, 4251} Procedure to Salvage Tang Slots on Transmission and Brake Pistons{0679, 3160, 4011, 4251}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents{4000, 4050, 4100, 4250, 4300} Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents{4000, 4050, 4100, 4250, 4300}
CONTROL GP

Check Valve (Parking Brake Release) 120H and 135H Motor Graders Air System and Brakes
Pressure Switch (Brake Air) (Stop Lamp) 120H and 135H Motor Graders Air System and Brakes
Pressure Switch (Brake Air) (Parking Brake) 120H and 135H Motor Graders Air System and Brakes
Service Brake Control 120H and 135H Motor Graders Air System and Brakes
Solenoid Valve (Parking Brake) 120H and 135H Motor Graders Air System and Brakes
Pressure Switch (Low Brake Air) 120H and 135H Motor Graders Air System and Brakes

Air Control Valve (Service Brakes) 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes

Parking Brake Control - Adjust 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Air Pressure Gauge - Test 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Service Brake Control Valve - Check 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Pressure Switch (Low Brake Air) - Test 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Pressure Switch (Brake Air) (Stop Lamp) - Test 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Service Brake Control (Pedal) - Adjust 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes

A New Hose Has Improved Service Life {4265, 4269} 2004/07/05
The Parking Brake Control Group Has Been Updated with a New Air Valve Assembly Which Improves Reliability {4282, 4284} 2005/07/04
An Updated Parking Brake Control Group, A New Transmission Control Group, and New Specifications Improve Reliability {3065, 4282, 4284} 2005/07/04
CYLINDER GP
Double Lip Wiper Seals Must Be Installed Properly {7562} 2002/12/09

Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562} Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
TANK GP

Relief Valve (Air Tank) 120H and 135H Motor Graders Air System and Brakes
Check Valve (Air Tank) 120H and 135H Motor Graders Air System and Brakes

Relief Valve (Air Tank) 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes

Air Tank - Remove and Install 120H and 135H Motor Graders Machine Systems

A New Fitting Improves Testing Procedures {4272} 2005/03/28
Orientation of the Air Relief Valve May Improve The Functionality {4272} 2005/10/10

Air Tank Moisture and Sediment - Drain 120H and 135H Motor Graders
TOOLS

243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738} 2004/07/05
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784} 2004/12/27

Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700} Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000} HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057} 4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700} Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
VALVE GP

Air Control Valve (Service Brake) - Disassemble 120H and 135H Motor Graders Machine Systems
Air Control Valve (Service Brake) - Assemble 120H and 135H Motor Graders Machine Systems
Air Control Valve (Parking Brake) - Remove 120H and 135H Motor Graders Machine Systems
Air Control Valve (Parking Brake) - Install 120H and 135H Motor Graders Machine Systems
Air Control Valve (Service Brake) - Remove 120H and 135H Motor Graders Machine Systems
Air Control Valve (Service Brake) - Install 120H and 135H Motor Graders Machine Systems

Follow the Recommended Service Intervals That Are Listed in the Operation and Maintenance Manual for the Air System {4280, 4282} 2005/07/18
The Reliability of the Shuttle Valve Has Been Improved {4289, 5079} 2005/06/13
A New Coil Assembly is Now Used {5479} 2011/05/04
COOLING SYSTEM
COOLANT CONDITIONER GP

Cooling System Coolant Sample (Level 1) - Obtain 120H and 135H Motor Graders
Cooling System Coolant Extender (ELC) - Add 120H and 135H Motor Graders
Cooling System Coolant Sample (Level 2) - Obtain 120H and 135H Motor Graders
COOLER GP

Engine Oil Cooler - Remove 3126B Engines for Caterpillar Built Machines
Engine Oil Cooler - Install 3126B Engines for Caterpillar Built Machines
Engine Oil Cooler - Remove and Install 120H and 135H Motor Graders 3126B Engine Supplement

A New Spring for the Oil Filter Bypass Valve and for the Oil Cooler Bypass Valve is Now in Production {1306, 1314, 1318, 1378} 2004/01/26
New Gaskets Are Now Available for the Oil Filter Base and the Oil Cooler on Certain 3116, 3126, and C7 Machines Engines {1306, 1378} 2013/02/13
Replacing Gaskets for the Engine Oil Cooler {1378} 2004/10/11
Improved Engine Oil Coolers are Now Used {1378} 2005/07/25
100% Leak Testing of Oil Coolers {1378} 2007/04/23

100% Leak Testing of Oil Coolers {1378} 2007/04/30
FAN GP

CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt 3126B Engine for Caterpillar Built Machines
CID 0290 FMI 04 Engine Fan Pump Pressure short to ground 3126B Engine for Caterpillar Built Machines

Fan and Gear Motor (Hydraulic Fan) - Remove 120H and 135H Motor Graders Machine Systems
Fan and Gear Motor (Hydraulic Fan) - Install 120H and 135H Motor Graders Machine Systems
Gear Motor (Hydraulic Fan) - Disassemble 120H and 135H Motor Graders Machine Systems
Gear Motor (Hydraulic Fan) - Assemble 120H and 135H Motor Graders Machine Systems
LINES GP-WATER

Water Temperature Regulator 3126B Engine for Caterpillar Built Machines

Water Temperature Regulator - Remove and Install 3126B Engines for Caterpillar Built Machines
Water Temperature Regulator Housing - Remove and Install 3126B Engines for Caterpillar Built Machines

Water Temperature Regulators (Thermostats) Have Been Redesigned {1355, 1380, 1393} 2013/04/17

Water Temperature Regulators (Thermostats) Have Been Redesigned {1355, 1380, 1393} 2012/12/19

Cooling System Water Temperature Regulator - Replace 120H and 135H Motor Graders
PUMP GP-WATER

Water Pump 3126B Engine for Caterpillar Built Machines
Water Pump 3126B Engine for Caterpillar Built Machines

Water Pump - Disassemble 3126B Engines for Caterpillar Built Machines
Water Pump - Assemble 3126B Engines for Caterpillar Built Machines
Water Pump - Remove 3126B Engines for Caterpillar Built Machines
Water Pump - Install 3126B Engines for Caterpillar Built Machines
Water Pump - Remove 120H and 135H Motor Graders 3126B Engine Supplement
Water Pump - Install 120H and 135H Motor Graders 3126B Engine Supplement
RADIATOR GP
Radiator - Remove and Install 120H and 135H Motor Graders 3126B Engine Supplement
Radiator Guard and Support, Aftercooler, and Radiator - Install 120H and 135H Motor Graders 3126B Engine Supplement

A Radiator Cap with a Higher Relief Pressure Is Available. {1353} 2006/01/23

Radiator Core - Clean 120H and 135H Motor Graders
Radiator - Clean 120H and 135H Motor Graders
Cooling System Coolant (ELC) - Change 120H and 135H Motor Graders
Cooling System Coolant Level - Check 120H and 135H Motor Graders
Cooling System Pressure Cap - Clean/Replace 120H and 135H Motor Graders
TOOLS

Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542} 2004/12/01

Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060} Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
DIFFERENTIAL STEERING SYSTEM
MOTOR GP

General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors{5058, 5070} General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors{5058, 5070}
PUMP GP

Repair Process for Hydraulic Gear Pumps{5073} Repair Process for Hydraulic Gear Pumps{5073}

Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
ELECTRICAL AND STARTING SYSTEM
ALARM GP

Monitoring System 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes

MID 030 - CID 0271 - FMI 03 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
MID 030 - CID 0271 - FMI 05 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
MID 030 - CID 0271 - FMI 06 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
MID 081 - CID 0637 - FMI 06 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

Backup Alarm 120H and 135H Motor Graders
Backup Alarm - Test 120H and 135H Motor Graders
Monitoring System 120H and 135H Motor Graders

Installation of 244-1090 Alarm Gp {7400, 7402, 7407} Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 262-6141 Alarm Gp {7406} Installation of 262-6141 Alarm Gp {7406}
ALTERNATOR GP-CHARGING

Alternator and Regulator 3126B Engine for Caterpillar Built Machines

Alternator - Noisy Operation 3126B Engine for Caterpillar Built Machines
Charging System 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
MID 081 - CID 0168 - FMI 01 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Alternator - Charging Problem 3126B Engine for Caterpillar Built Machines
MID 114 - CID 0168 - FMI 03 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 0168 - FMI 04 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 0168 - FMI 03 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 0168 - FMI 04 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 161 - CID 0168 - FMI 00 Product Link - PL522/523
MID 161 - CID 0168 - FMI 01 Product Link - PL522/523
MID 161 - CID 1251 - FMI 03 Product Link - PL522/523
MID 122 - CID 0168 - FMI 00 Product Link 121S/300
MID 122 - CID 0168 - FMI 01 Product Link 121S/300
MID 122 - CID 1251 - FMI 03 Product Link 121S/300

Alternator - Remove and Install 3126B Engines for Caterpillar Built Machines
Alternator - Remove and Install 120H and 135H Motor Graders 3126B Engine Supplement

Charging System Troubleshooting{1406} Charging System Troubleshooting{1406}

REMANUFACTURED HEAVY DUTY BRUSHLESS ALTERNATORS REMANUFACTURED HEAVY DUTY BRUSHLESS ALTERNATORS
BATTERY GP

Battery 120H and 135H Motor Graders Power Train

Battery - Test 3126B Engines for CaterpillarBuilt Machines

Battery - Remove and Install 120H and 135H Motor Graders 3126B Engine Supplement

Battery or Battery Cable - Inspect/Replace 120H and 135H Motor Graders
Battery - Recycle 120H and 135H Motor Graders

Battery Test Procedure{1401} Battery Test Procedure{1401}
Procedure to Improve the Starting Capability for Motor Graders{1401, 1408, 1456, 1902, 7620} Procedure to Improve the Starting Capability for Motor Graders{1401, 1408, 1456, 1902, 7620}

PRODUCT SUPPORT PROGRAM FOR IMPROVING THE COLD STARTING/HIGH ALTITUDE CAPABILITY OF THE 120H AND 135H MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR IMPROVING THE COLD STARTING/HIGH ALTITUDE CAPABILITY OF THE 120H AND 135H MOTOR GRADERS

Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B} Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Process for Communicating an Incident with a Battery{1401} Process for Communicating an Incident with a Battery{1401}
CONTROL GP-ELECTRONIC

Electrical Power Supply Circuit - Test 3126B Engine for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt 3126B Engine for Caterpillar Built Machines

Enhancements to the Cold Starting Capability for Specific Motor Graders {1456, 1902, 7620} 2007/12/24
New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat <SUP>&reg;</SUP> Products {7610, 7620} 2014/02/06

Communication Adapter II{0600, 0709, 7600, 7610} Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490} Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
ELECTRONICS GP-ENGINE

Electronic Display Module - If Equipped 3126B Engine for Caterpillar Built Machines
Factory Passwords Worksheet 3126B Engine for Caterpillar Built Machines
ECM Will Not Communicate with Other Systems or Display Modules 3126B Engine for Caterpillar Built Machines
CID 0268 FMI 02 Check Programmable Parameters 3126B Engine for Caterpillar Built Machines
CID 0562 FMI 09 Unable to Communicate with Cat Monitoring System 3126B Engine for Caterpillar Built Machines
Event Codes 3126B Engine for Caterpillar Built Machines
Self-Diagnostics 3126B Engine for Caterpillar Built Machines
Flash Programming 3126B Engine for Caterpillar Built Machines
CID 0254 FMI 12 Electronic Control Module Error 3126B Engine for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground 3126B Engine for Caterpillar Built Machines
Electronic Service Tool Will Not Communicate with ECM 3126B Engine for Caterpillar Built Machines
CID 0041 FMI 04 8 Volt DC Supply short to ground 3126B Engine for Caterpillar Built Machines
CID 0248 FMI 09 Cat Data Link not communicating 3126B Engine for Caterpillar Built Machines
CID 0091 FMI 08 Throttle Position signal abnormal 3126B Engine for Caterpillar Built Machines
CID 0296 FMI 09 Unable to communicate with Transmission ECM 3126B Engine for Caterpillar Built Machines
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs 3126B Engine for Caterpillar Built Machines
Diagnostic Codes 3126B Engine for Caterpillar Built Machines
CID 0041 FMI 03 8 Volt DC Supply short to +batt 3126B Engine for Caterpillar Built Machines
E015 High Engine Coolant Temperature Derate 3126B Engine for Caterpillar Built Machines
E017 High Engine Coolant Temperature Warning 3126B Engine for Caterpillar Built Machines
E025 High Inlet Air Temperature Derate 3126B Engine for Caterpillar Built Machines
E027 High Inlet Air Temperature Warning 3126B Engine for Caterpillar Built Machines
E039 Low Engine Oil Pressure Derate 3126B Engine for Caterpillar Built Machines
E100 Low Engine Oil Pressure Warning 3126B Engine for Caterpillar Built Machines
E096 High Fuel Pressure 3126B Engine for Caterpillar Built Machines
E190 Engine Overspeed Warning 3126B Engine for Caterpillar Built Machines
System Overview 3126B Engine for Caterpillar Built Machines
CID 0549 FMI 02 Incorrect Throttle Lock Switch inputs 3126B Engine for Caterpillar Built Machines
Programming Parameters 3126B Engine for Caterpillar Built Machines
E095 Fuel Filter Restriction Warning 3126B Engine for Caterpillar Built Machines
Cat Data Link Circuit - Test 3126B Engine for Caterpillar Built Machines
Replacing the ECM 3126B Engine for Caterpillar Built Machines
System Configuration Parameters 3126B Engine for Caterpillar Built Machines
CID 0253 FMI 02 Personality Module mismatch 3126B Engine for Caterpillar Built Machines
Factory Passwords 3126B Engine for Caterpillar Built Machines
ECM Will Not Accept Factory Passwords 3126B Engine for Caterpillar Built Machines

Electronic Control Module - Remove and Install 3126B Engines for Caterpillar Built Machines

New Service Information Tool for CAT Dealers is Now Available {1900} 2002/06/17
An Upgrade to the Electronic Control Module (ECM) for the Engine Is Available {1901} 2003/07/28
New Test ECM Available for Machines {0785, 7610} 2004/05/10
New Test ECM Is Now Available for Certain Cat Machines {0785, 1901, 1920, 7610} 2011/11/23
Update on the Factory Password System {1901, 7620} 2008/02/11
Improved Electronic Control Modules and Engine Electronic Control Groups are Now Used {7610} 2008/04/28
New Engine Software Is Available for 135H Motor Graders in Underground Mining Applications {1901, 1920, 1923} 2009/04/20
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620} 2014/04/08

Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620} 2007/10/01

277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930} 2006/09/04
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620} 2007/10/22

Welding on Machines and Engines with Electronic Controls 120H and 135H Motor Graders

Using the 217-0114 Adapter Cable As {0709, 1901, 1920} Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920} Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control{1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610} Diagnostic Code Information for Caterpillar ® Electronic Control{1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp{1901, 1920} Procedure to Flash the ADEM 3 Engine Electronic Control Gp{1901, 1920}
ELECTRONICS GP-POWER TRAIN

Electronic Control Module (Power Train) 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Data Link 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

Glossary of Electrical Terms 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Accessing Calibration Submodes 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Electronic Control Module (ECM) - Replace 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Electronic Control Module (ECM) - Flash Program 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Electronic Control Module (ECM) - Configure 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

Diagnostic Code List 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Diagnostic Capabilities 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 0248 - FMI 02 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 0268 - FMI 02 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 0520 - FMI 02 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

Correction to Troubleshooting , "Diagnostic Capabilities" {4800} 2003/05/05
New Test ECM Available for MAC 14 Drive Train {7610} 2004/10/11
New Transmission ECM Software Is Now Used on Tier II Emissions {7620} 2005/03/21
New Transmission Software is now Available {4800, 7610, 7620} 2007/02/05
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783} 2007/10/22

PRODUCT SUPPORT PROGRAM FOR UPDATING TRANSMISSION SOFTWARE ON CERTAIN 12H, 120H, 135H, 140H, 143H, 160H, AND 163H MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR UPDATING TRANSMISSION SOFTWARE ON CERTAIN 12H, 120H, 135H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
CONTROL GP-FAN

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit 3126B Engine for Caterpillar Built Machines
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground 3126B Engine for Caterpillar Built Machines
CONTROL GP-GRADE

Map Recording AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
General Information AccuGrade® Laser (CB420)
Modes of Operation AccuGrade® Laser (CB420)
Menus AccuGrade® Laser (CB420)
System Setup AccuGrade® Laser (CB420)
Brightness (Display and Light Bar) AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Light Bar Scale AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
General Information AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
System Components AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Data Card AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Design Folder AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Radio Utility AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Receiver Firmware Upgrade AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Display Firmware Upgrade AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Setup Menu AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Avoidance Zone AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Beeper AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Guidance Terms AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Modes of Operation AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Display Units AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Plan View Rotation AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Receiver Configuration AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Software Support Option AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Text Items AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Blade Wear AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Display Settings AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Vertical Guidance Method AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Operator Access AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Flashing Messages AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Sensor Firmware Upgrade AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Increment Switch AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Mast Tilt - Adjust Bolt Hole AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Wireless Communication AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Customer Supplied Radio AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
GPS Accuracy Mode AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Avoidance Zone AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Beeper AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Blade Wear AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Brightness (Display and Light Bar) AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Customer Supplied Radio AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Data Card AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Design Folder AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Display Firmware Upgrade AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Display Settings AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Display Units AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Flashing Messages AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
GPS Accuracy Mode AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
General Information AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Guidance Terms AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Increment Switch AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Light Bar Scale AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Map Recording AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Mast Tilt - Adjust Bolt Hole AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Modes of Operation AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Operator Access AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Plan View Rotation AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Radio Utility AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Receiver Configuration AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Sensor Firmware Upgrade AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Setup Menu AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Text Items AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Vertical Guidance Method AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
System Components AccuGrade® GPS v11 for CD700
Wireless Communication AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Display Registration and Activation AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Display Icons AccuGrade® Laser (CB420)
Data Link AccuGrade® Laser (CB420)
Display Language AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Software Support Option AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
On-Grade Tolerance AccuGrade® GPS v11 for CD700
General Information AccuGrade® GPS v11 for CD700
Flashing Messages AccuGrade® GPS v11 for CD700
Wireless Communication AccuGrade® GPS v11 for CD700
Display Language AccuGrade® GPS v11 for CD700
Operator Access AccuGrade® GPS v11 for CD700
Setup Menu AccuGrade® GPS v11 for CD700
Modes of Operation AccuGrade® GPS v11 for CD700

Module - Replace AccuGrade® Laser (CB420)
Linked Elevation (Dual Mast System) - Adjust AccuGrade® Laser (CB420)
Blade Reaction Time - Adjust - Valve Speed AccuGrade® Laser (CB420)
Blade Reaction Time - Adjust - Valve Speed AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Full Sensor - Calibrate AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Module - Replace AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Module - Flash Program AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Light Bar - Configure AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Machine Dimensions - Configure AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Machine Type - Configure - Machine Settings AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Sensor - Adjust - Rotation Sensor AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Sensor - Adjust - Mainfall Sensor AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Sensor - Adjust - Blade Slope Sensor AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Blade Reaction Time - Adjust - Valve Speed AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Full Sensor - Calibrate AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Light Bar - Configure AccuGrade® GPS v11 for CD700
Machine Dimensions - Configure AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Machine Type - Configure - Machine Settings AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Module - Flash Program AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Module - Replace AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Sensor - Adjust - Blade Slope Sensor AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Sensor - Adjust - Mainfall Sensor AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Sensor - Adjust - Rotation Sensor AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Sensor - Adjust - Rotation Sensor AccuGrade® Laser (CB420)
Sensor - Adjust - Mainfall Sensor AccuGrade® Laser (CB420)
Sensor - Adjust - Blade Slope Sensor AccuGrade® Laser (CB420)
Full Sensor - Calibrate AccuGrade® Laser (CB420)
Module - Flash Program AccuGrade® Laser (CB420)
Electric Mast - Calibrate AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Machine Type - Configure AccuGrade® GPS v11 for CD700
Sensor - Adjust - Mainfall Sensor AccuGrade® GPS v11 for CD700
Full Sensor - Calibrate AccuGrade® GPS v11 for CD700
Blade Pitch Sensor - Calibrate AccuGrade® GPS v11 for CD700
Sensor - Adjust - Rotation Sensor AccuGrade® GPS v11 for CD700
Module - Replace AccuGrade® GPS v11 for CD700
Module - Flash Program AccuGrade® GPS v11 for CD700

CB 31 Recalibrate Linked Mode Elevation AccuGrade® Laser (CB420)
Fault History Menu AccuGrade® Laser (CB420)
Hour Meter Menu AccuGrade® Laser (CB420)
Software Versions Menu AccuGrade® Laser (CB420)
Test Control Box Menu AccuGrade® Laser (CB420)
Test Valves Menu AccuGrade® Laser (CB420)
CB 1 Set Limits Fault AccuGrade® Laser (CB420)
CB 10 Set Limits Fault AccuGrade® Laser (CB420)
CB 24 Duplicate Left/Right Device AccuGrade® Laser (CB420)
Machine Voltage Menu AccuGrade® Laser (CB420)
CB 3 Calibration Failure AccuGrade® Laser (CB420)
CB 25 Elevation Limit Left AccuGrade® Laser (CB420)
CB 23 Unsupported Device AccuGrade® Laser (CB420)
CB 27 Control Box Failure AccuGrade® Laser (CB420)
CB 28 Invalid Serial Number AccuGrade® Laser (CB420)
CB 30 Duplicate Sensor Serial Number AccuGrade® Laser (CB420)
CB 26 Elevation Limit Right AccuGrade® Laser (CB420)
LR 20 End Of Travel AccuGrade® Laser (CB420)
MID 114 - CID 2261 - FMI 03 AccuGrade® Laser (CB420)
MID 114 - CID 2262 - FMI 03 AccuGrade® Laser (CB420)
MID 114 - CID 2261 - FMI 04 AccuGrade® Laser (CB420)
MID 114 - CID 2262 - FMI 04 AccuGrade® Laser (CB420)
MID 114 - CID 2262 - FMI 02 AccuGrade® Laser (CB420)
MID 114 - CID 2261 - FMI 02 AccuGrade® Laser (CB420)
AS 3 Serial Number Format Fault AccuGrade® Laser (CB420)
AS 4 Serial Number Format Fault AccuGrade® Laser (CB420)
AS 5 Serial Number Format Fault AccuGrade® Laser (CB420)
MID 114 - CID 2261 - FMI 07 AccuGrade® Laser (CB420)
MID 114 - CID 2262 - FMI 07 AccuGrade® Laser (CB420)
MID 114 - CID 2291 - FMI 03 AccuGrade® Laser (CB420)
MID 114 - CID 2291 - FMI 05 AccuGrade® Laser (CB420)
MID 114 - CID 2291 - FMI 06 AccuGrade® Laser (CB420)
Operational Problems AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Receiver AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Base Station AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Machine Radio AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Machine Position - Display Messages AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Controls AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Status Indicators AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Light Bar AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Beeper AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Determining Detected Faults (Electronic Service Tool) AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2261 - FMI 02 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2261 - FMI 03 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2261 - FMI 04 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2261 - FMI 07 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2262 - FMI 02 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2262 - FMI 03 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2262 - FMI 04 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2262 - FMI 07 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2291 - FMI 03 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2291 - FMI 05 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2291 - FMI 06 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Electrical Power Supply AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 0248 - FMI 02 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 0248 - FMI 09 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 0248 - FMI 12 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Base Station AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Beeper AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Controls AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Determining Detected Faults (Electronic Service Tool) AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Electrical Power Supply AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Light Bar AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Machine Position AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Machine Radio AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Operational Problems AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Receiver AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Status Indicators AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 0248 - FMI 02 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 0248 - FMI 09 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 0248 - FMI 12 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2261 - FMI 02 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2261 - FMI 03 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2261 - FMI 04 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2261 - FMI 07 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2262 - FMI 02 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2262 - FMI 03 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2262 - FMI 04 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2262 - FMI 07 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2291 - FMI 03 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2291 - FMI 05 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2291 - FMI 06 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
CB 21 Remote Auto/Manual Switch Failure AccuGrade® Laser (CB420)
CB 22 VM Missing AccuGrade® Laser (CB420)
CB 35 VM Fault AccuGrade® Laser (CB420)
CB 37 Align Rotation AccuGrade® Laser (CB420)
CB 38 Angle Sensor Hardware Failure AccuGrade® Laser (CB420)
CB 39 Rotation Sensor Hardware Failure AccuGrade® Laser (CB420)
CB 40 Laser Receiver Hardware Failure AccuGrade® Laser (CB420)
CB 41 Control Latency AccuGrade® Laser (CB420)
CB 42 Control Latency AccuGrade® Laser (CB420)
CB 43 Laser Interference AccuGrade® Laser (CB420)
CB 44 Laser Interference AccuGrade® Laser (CB420)
CB 45 Sonic Tracer Not Found AccuGrade® Laser (CB420)
CB 46 Slope Ratio Out of Limits AccuGrade® Laser (CB420)
CB 47 Sensor Missing AccuGrade® Laser (CB420)
CB 48 Invalid Password AccuGrade® Laser (CB420)
CB 49 Password Expired AccuGrade® Laser (CB420)
CB 50 Serial Number Fault AccuGrade® Laser (CB420)
CB 52 Sensor Not Supported AccuGrade® Laser (CB420)
CB 54 Slope Limit Left AccuGrade® Laser (CB420)
CB 55 Slope Limit Right AccuGrade® Laser (CB420)
CB 56 Reference Target Not Found AccuGrade® Laser (CB420)
CB 57 Password Expired AccuGrade® Laser (CB420)
CB 61 Service Agreement Expired AccuGrade® Laser (CB420)
CB 62 VM Fault AccuGrade® Laser (CB420)
CB 63 Calibration Fault AccuGrade® Laser (CB420)
LR 0 Communication Fault AccuGrade® Laser (CB420)
LR 3 Serial Number Format Fault AccuGrade® Laser (CB420)
LR 4 Serial Number Format Fault AccuGrade® Laser (CB420)
LR 5 Serial Number Format Fault AccuGrade® Laser (CB420)
LR 148 Elevation Limit AccuGrade® Laser (CB420)
ST 1 Memory Fault AccuGrade® Laser (CB420)
ST 2 Memory Fault AccuGrade® Laser (CB420)
ST 3 Serial Number Fault AccuGrade® Laser (CB420)
ST 4 Serial Number Fault AccuGrade® Laser (CB420)
ST 5 Serial Number Fault AccuGrade® Laser (CB420)
ST 6 Flash Program Fault AccuGrade® Laser (CB420)
ST 7 End of Travel AccuGrade® Laser (CB420)
ST 8 Function Instance Fault AccuGrade® Laser (CB420)
Operational Problems AccuGrade® Laser (CB420)
CB 2 Lost Beam AccuGrade® Laser (CB420)
CB 4 Calibration Failure AccuGrade® Laser (CB420)
CB 5 Calibration Failure AccuGrade® Laser (CB420)
CB 6 Wrong Blade Motion AccuGrade® Laser (CB420)
CB 7 Calibration Failure AccuGrade® Laser (CB420)
CB 8 No Blade Movement AccuGrade® Laser (CB420)
CB 9 Calibration Failure AccuGrade® Laser (CB420)
CB 11 Low Voltage AccuGrade® Laser (CB420)
CB 12 System Hours Lost AccuGrade® Laser (CB420)
CB 13 Valve Calibration Lost AccuGrade® Laser (CB420)
CB 14 Memory Error AccuGrade® Laser (CB420)
CB 15 Memory Error AccuGrade® Laser (CB420)
CB 16 Linked Mode Sensor Missing AccuGrade® Laser (CB420)
CB 17 CAN Network Failure AccuGrade® Laser (CB420)
CB 19 CAN Network Failure AccuGrade® Laser (CB420)
CB 18 CAN Network Failure AccuGrade® Laser (CB420)
CB 32 ECM Disconnected AccuGrade® Laser (CB420)
CB 33 VM Fault AccuGrade® Laser (CB420)
CB 34 VM Fault AccuGrade® Laser (CB420)
CB 36 Left Elevation Sensor Missing AccuGrade® Laser (CB420)
EM 1 Internal Failure AccuGrade® Laser (CB420)
EM 2 Limit Switch Failure AccuGrade® Laser (CB420)
EM 15 Motor/Encoder Bad AccuGrade® Laser (CB420)
EM 21 Elevation Fault AccuGrade® Laser (CB420)
EM 23 Memory Fault AccuGrade® Laser (CB420)
EM 24 Memory Fault AccuGrade® Laser (CB420)
EM 25 Memory Fault AccuGrade® Laser (CB420)
EM 31 Memory Fault AccuGrade® Laser (CB420)
EM 26 Memory Fault AccuGrade® Laser (CB420)
EM 29 Internal Fault AccuGrade® Laser (CB420)
EM 32 EM Location Change AccuGrade® Laser (CB420)
EM 30 Motor/Encoder Fault AccuGrade® Laser (CB420)
LR 21 Check Connection AccuGrade® Laser (CB420)
LR 1 Memory Fault AccuGrade® Laser (CB420)
LR 2 Memory Fault AccuGrade® Laser (CB420)
AS 2 Memory Fault AccuGrade® Laser (CB420)
AS 6 Flash Program Fault AccuGrade® Laser (CB420)
Determining Detected Faults (Electronic Service Tool) AccuGrade® Laser (CB420)
AS 1 Memory Fault AccuGrade® Laser (CB420)
Advanced Tracking System - MT900 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
CAN Data Link AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Operational Problems AccuGrade® GPS v11 for CD700
Machine Radio AccuGrade® GPS v11 for CD700
Machine Position AccuGrade® GPS v11 for CD700
CAN Data Link AccuGrade® GPS v11 for CD700
Electrical Power Supply (Light Bar) AccuGrade® GPS v11 for CD700
Electrical Power Supply (GPS Receiver) AccuGrade® GPS v11 for CD700
Electrical Power Supply (Display) AccuGrade® GPS v11 for CD700
Electrical Power Supply (Data Radio) AccuGrade® GPS v11 for CD700
Electrical Power Supply (Angle Sensor) AccuGrade® GPS v11 for CD700
Determining Detected Faults (Display) AccuGrade® GPS v11 for CD700
Increment/Decrement Problem AccuGrade® GPS v11 for CD700

AccuGrade<SUP>&reg;</SUP> 6.10 Software Now Available {7220, 7620} 2006/06/05
Product Tracking Tool Is Now Available For AccuGrade<SUP>&reg;</SUP>, Aquila, CAES, And Minestar<SUP>&reg;</SUP> Hardware {7220, 7604, 7620} 2006/08/07
New AccuGrade<SUP>&reg;</SUP> Software and Components are now available {7220} 2006/12/04
New AccuGrade<SUP>&reg;</SUP> Software is Now Available {7220, 7620} 2007/02/05
New AccuGrade<SUP>&reg;</SUP> Software for CB420 Display is Now Available {7220, 7620} 2007/07/23
New AccuGrade <SUP>&reg;</SUP> is Now Available {7220, 7620} 2007/08/27
New MS990 GNSS Receiver Firmware is Now Available {7010, 7620} 2007/08/20
New Sonic Sensor For Accugrade<SUP>&reg;</SUP> Is Now Available {1439, 7220} 2007/11/19
New AccuGrade <SUP>&reg;</SUP> Software is Now Available {7220, 7620} 2007/08/27
Matched Receiver Firmware for AccuGrade Dual GPS Systems {7010, 7620} 2007/10/01
New AccuGrade <SUP>&reg;</SUP> Software is Now Available {7220, 7620} 2008/02/11
Improvements Are Available For Cross Slope On Motor Graders That Are Equipped The AccuGrade<SUP>&reg;</SUP> System {1439, 7220} 2008/03/03
New AccuGrade<SUP>&reg;</SUP> Firmware is Now Available {7220, 7620} 2008/05/05
New Software For The AccuGrade<SUP>&reg;</SUP> Electric Mast Is Now available {7620, 79NS} 2008/09/08
Software Files for AccuGrade<SUP>&reg;</SUP> Are Now Available on SISWeb {7220, 7620} 2008/10/13
New AccuGrade<SUP>&reg;</SUP> Software is Now Available {7220, 7620} 2009/02/23
New AccuGrade<SUP>&reg;</SUP> Software for the CB420 Display is Now Available {7220} 2009/03/30
New AccuGrade Version 11.10 Software is Now Available {7220, 7620} 2009/07/27
New AccuGrade Software Version 11.10-B is Now Available {7220} 2009/09/30
New AccuGrade<SUP>&reg;</SUP> Software is Now Available {7220, 7620} 2010/03/22
New AccuGrade Software Version 11.21 for the CD700 Display Is Now Available on SISweb {7220, 7620} 2010/07/08

Safety Messages AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
General Information AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
System Components AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Automatic Control System AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Avoidance Zone - Set AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Beeper - Set AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Blade Wear - Set AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Brightness (Display and Light Bar) - Set AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Diagnostics - View AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
GPS Accuracy Mode - Set AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Light Bar Scale - Set AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Map Recording - Set AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Settings - Restore AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Settings - Save AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Text Items - Set AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Valve Speed - Set AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Vertical Guidance Method - Set AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Vertical Offset Increment - Set AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Common Problems AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Flashing Messages AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Full Screen Messages AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Troubleshooting Techniques AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Machine Symbols AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Glossary AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
End User License Agreement AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Vertical Guidance AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Horizontal Guidance AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Light Bar AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
1D Guidance System AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Cross Slope Operation AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Plan View AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Plan View - Set AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Designs AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Design Surface Type AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Level Surface Design AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Sloping Surface Design AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Display Navigation AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Cross Section View AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Profile View AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Text View AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Startup AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Advanced Tracking System AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Configuration AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
General Maintenance Information AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Safety Messages AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
General Information AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
System Components AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Startup AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Designs AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Design Surface Type AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Level Surface Design AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Sloping Surface Design AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Display Navigation AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Plan View AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Cross Section View AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Profile View AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Text View AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Light Bar AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Horizontal Guidance AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Vertical Guidance AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Cross Slope Operation AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
General Maintenance Information AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Automatic Control System AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Configuration AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Avoidance Zone - Set AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Beeper - Set AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Blade Wear - Set AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Brightness (Display and Light Bar) - Set AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Diagnostics - View AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
GPS Accuracy Mode - Set AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Light Bar Scale - Set AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Map Recording - Set AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Plan View - Set AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Settings - Restore AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Settings - Save AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Text Items - Set AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Valve Speed - Set AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Vertical Guidance Method - Set AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Vertical Offset Increment - Set AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Common Problems AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Flashing Messages AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Configuration - GPS Receiver AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Configuration - Sensor Calibration AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Configuration - Machine Radio AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Full Screen Messages AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Troubleshooting Techniques AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Machine Symbols AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Glossary AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
End User License Agreement AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Advanced Tracking System AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Safety Messages AccuGrade® Grade Control System - CD700
General Information AccuGrade® Grade Control System - CD700
System Components AccuGrade® Grade Control System - CD700
Startup AccuGrade® Grade Control System - CD700
Plan View AccuGrade® Grade Control System - CD700
Cross Section View AccuGrade® Grade Control System - CD700
Profile View AccuGrade® Grade Control System - CD700
Text View AccuGrade® Grade Control System - CD700
Light Bar AccuGrade® Grade Control System - CD700
Vertical Guidance AccuGrade® Grade Control System - CD700
Horizontal Guidance AccuGrade® Grade Control System - CD700
Advanced Tracking System - MT600 AccuGrade® Grade Control System - CD700
Cross Slope Operation AccuGrade® Grade Control System - CD700
Designs AccuGrade® Grade Control System - CD700
Design Surface Type AccuGrade® Grade Control System - CD700
Level Surface Design AccuGrade® Grade Control System - CD700
Sloping Surface Design AccuGrade® Grade Control System - CD700
General Maintenance Information AccuGrade® Grade Control System - CD700
Automatic Control System AccuGrade® Grade Control System - CD700
Configuration AccuGrade® Grade Control System - CD700
Configuration - Machine Radio AccuGrade® Grade Control System - CD700
Configuration - Sensor Calibration AccuGrade® Grade Control System - CD700
Configuration - GPS Receiver AccuGrade® Grade Control System - CD700
Avoidance Zone - Set AccuGrade® Grade Control System - CD700
Beeper - Set AccuGrade® Grade Control System - CD700
Blade Wear - Set AccuGrade® Grade Control System - CD700
Brightness (Display and Light Bar) - Set AccuGrade® Grade Control System - CD700
Diagnostics - View AccuGrade® Grade Control System - CD700
GPS Accuracy Mode - Set AccuGrade® Grade Control System - CD700
Light Bar Scale - Set AccuGrade® Grade Control System - CD700
Map Recording - Set AccuGrade® Grade Control System - CD700
Plan View - Set AccuGrade® Grade Control System - CD700
Settings - Restore AccuGrade® Grade Control System - CD700
Settings - Save AccuGrade® Grade Control System - CD700
Text Items - Set AccuGrade® Grade Control System - CD700
Valve Speed - Set AccuGrade® Grade Control System - CD700
Vertical Guidance Method - Set AccuGrade® Grade Control System - CD700
Vertical Offset Increment - Set AccuGrade® Grade Control System - CD700
Common Problems AccuGrade® Grade Control System - CD700
Flashing Messages AccuGrade® Grade Control System - CD700
Full Screen Messages AccuGrade® Grade Control System - CD700
Troubleshooting Techniques AccuGrade® Grade Control System - CD700
Machine Symbols AccuGrade® Grade Control System - CD700
Glossary AccuGrade® Grade Control System - CD700
End User License Agreement AccuGrade® Grade Control System - CD700
Display Navigation AccuGrade® Grade Control System - CD700
Laser Guidance System AccuGrade® Grade Control System - CD700
Configuration - Benching the Laser AccuGrade® Grade Control System - CD700
Advanced Tracking System - MT900 AccuGrade® Grade Control System - CD700
Guidance to Dynamic Layered Lift Alignments AccuGrade® Grade Control System - CD700
Safety Messages Accugrade® GPS (CD700)
General Information Accugrade® GPS (CD700)
System Components Accugrade® GPS (CD700)
Startup Accugrade® GPS (CD700)
Display Navigation Accugrade® GPS (CD700)
Plan View Accugrade® GPS (CD700)
Cross Section View Accugrade® GPS (CD700)
Profile View Accugrade® GPS (CD700)
Text View Accugrade® GPS (CD700)
Light Bar Accugrade® GPS (CD700)
Vertical Guidance Accugrade® GPS (CD700)
Horizontal Guidance Accugrade® GPS (CD700)
Guidance to Dynamic Layered Lift Alignments Accugrade® GPS (CD700)
Laser Guidance System Accugrade® GPS (CD700)
Advanced Tracking System - MT900 Accugrade® GPS (CD700)
Cross Slope Operation Accugrade® GPS (CD700)
Designs Accugrade® GPS (CD700)
Design Surface Type Accugrade® GPS (CD700)
Level Surface Design Accugrade® GPS (CD700)
Sloping Surface Design Accugrade® GPS (CD700)
General Maintenance Information Accugrade® GPS (CD700)
Automatic Control System Accugrade® GPS (CD700)
Configuration Accugrade® GPS (CD700)
Avoidance Zone - Set Accugrade® GPS (CD700)
Beeper - Set Accugrade® GPS (CD700)
Blade Wear - Set Accugrade® GPS (CD700)
Brightness (Display and Light Bar) - Set Accugrade® GPS (CD700)
Diagnostics - View Accugrade® GPS (CD700)
GPS Accuracy Mode - Set Accugrade® GPS (CD700)
Light Bar Scale - Set Accugrade® GPS (CD700)
Map Recording - Set Accugrade® GPS (CD700)
Plan View - Set Accugrade® GPS (CD700)
Settings - Restore Accugrade® GPS (CD700)
Settings - Save Accugrade® GPS (CD700)
Text Items - Set Accugrade® GPS (CD700)
Valve Speed - Set Accugrade® GPS (CD700)
Vertical Guidance Method - Set Accugrade® GPS (CD700)
Vertical Offset Increment - Set Accugrade® GPS (CD700)
Common Problems Accugrade® GPS (CD700)
Flashing Messages Accugrade® GPS (CD700)
Full Screen Messages Accugrade® GPS (CD700)
Troubleshooting Techniques Accugrade® GPS (CD700)
Machine Symbols Accugrade® GPS (CD700)
Glossary Accugrade® GPS (CD700)
End User License Agreement Accugrade® GPS (CD700)
Configuration - GPS Receiver Accugrade® GPS (CD700)
Configuration - Sensor Calibration Accugrade® GPS (CD700)
Configuration - Machine Radio Accugrade® GPS (CD700)
Configuration - Benching the Laser Accugrade® GPS (CD700)
Advanced Tracking System - MT600 Accugrade® GPS (CD700)

Installation of the AccuGrade Electronic Components for Motor Graders{7220} Installation of the AccuGrade Electronic Components for Motor Graders{7220}
Instructions for Updating the AccuGrade<SUP>&reg;</SUP> System From MS980C GPS Receivers to MS990C GPS Receivers{7220} Instructions for Updating the AccuGrade® System From MS980C GPS Receivers to MS990C GPS Receivers{7220}
Software Activation for the AccuGrade<SUP>&reg;</SUP> Display{7220, 7620} Software Activation for the AccuGrade® Display{7220, 7620}
Installation of the AccuGrade<SUP>&reg;</SUP> - Grade Control System for the Motor Graders{7220} Installation of the AccuGrade® - Grade Control System for the Motor Graders{7220}
Installing The Adjustable Bracket For The Blade Slope Sensor{1439, 7220} Installing The Adjustable Bracket For The Blade Slope Sensor{1439, 7220}
Installation of the AccuGrade<SUP>&reg;</SUP> - Grade Control System (CD700) For Motor Graders{7220} Installation of the AccuGrade® - Grade Control System (CD700) For Motor Graders{7220}

Clarification of Lift + Cross Slope Configuration in GPS/ATS AccuGrade <SUP>TM</SUP> Version 6.0 Software Operation for Motor Graders {7220} Clarification of Lift + Cross Slope Configuration in GPS/ATS AccuGrade TM Version 6.0 Software Operation for Motor Graders {7220}
Clarification of Vertical Method Configuration in GPS/ATS AccuGrade <SUP>TM</SUP> Version 6.0 Software Operation for Motor Graders {7220} Clarification of Vertical Method Configuration in GPS/ATS AccuGrade TM Version 6.0 Software Operation for Motor Graders {7220}
&quot;No GPS DATA (Right)&quot; Message on AccuGrade<SUP>&reg;</SUP> Systems{7220, 7490} "No GPS DATA (Right)" Message on AccuGrade® Systems{7220, 7490}
Fix for Incorrect Operation of Dual Laser Receivers{7220} Fix for Incorrect Operation of Dual Laser Receivers{7220}
AccuGrade<SUP>&reg;</SUP> CD700 Devices not Responding{7220, 7490} AccuGrade® CD700 Devices not Responding{7220, 7490}
ELECTRONICS GP-MACHINE

A New Version of Caterpillar Electronic Technician (ET) is Now Available {0785, 7600, 7610} 2008/05/19
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620} 2011/10/20

Installation of the Machine Security System (MSS) Universal Attachment Kit{7631, 7631} Installation of the Machine Security System (MSS) Universal Attachment Kit{7631, 7631}
Rework Procedure for 3E-5184 Secondary Steering Electronic Control Module {4348} Rework Procedure for 3E-5184 Secondary Steering Electronic Control Module {4348}
INSTALLATION GP

Improved End - of - Line - Test Fixture for the Product Link Antenna is Now Used {7606} 2006/11/13

Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604} Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
LIGHTING GP

A New Warning Beacon Is Now Available for Certain Motor Graders {1431} 2005/10/03
The Certification Conversion Arrangement is Updated {1432, 4493} 2008/03/03
A New Warning Beacon Lamp Group is Now Available {1431} 2008/03/17
A Improvement to Circuit for the Brake Lamp Has Been Made {1432, 4493} 2007/12/31
A New Halogen Lamp Is Now Available for Certain Cat Products {1434} 2011/11/14

Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429} Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Procedure for Installing the Caterpillar LED Strobe Light For Certain Motor Graders{1431} Procedure for Installing the Caterpillar LED Strobe Light For Certain Motor Graders{1431}
MOTOR GP

An Improved Starting Motor is Now Available {1453} 2007/04/30
An Improved Motor For The Air Conditioning Condenser Is Now Available {1805, 1815, 5927, 7320} 2009/09/14
A New Starter Solenoid is Now Available {1467} 2008/03/17

254-0204 Phase and Motor Rotation Tester{0374, 0599, 0709, 0734} 254-0204 Phase and Motor Rotation Tester{0374, 0599, 0709, 0734}
PANEL GP-CIRCUIT BREAKER

Power Supply Circuit of Electronic Control Module 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

Circuit Breaker Harness Assembly{1420} Circuit Breaker Harness Assembly{1420}
RECEPTACLE GP-AUXILIARY START
Supplemental Parts Information for the USN Seabee 135H Motor Grader{1383, 1463, 7000, 7301, 7310} Supplemental Parts Information for the USN Seabee 135H Motor Grader{1383, 1463, 7000, 7301, 7310}
SENDER GP

Senders 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

Position Sender (Articulation) - Adjust 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System

MID 030 - CID 0096 - FMI 08 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Fuel Level Sender 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
MID 030 - CID 0615 - FMI 03 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
MID 030 - CID 0615 - FMI 04 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
MID 030 - CID 0096 - FMI 03 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
MID 030 - CID 0096 - FMI 04 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
SENSOR GP

Position Sender (Articulation) 120H and 135H Motor Graders Hydraulic and Steering System
Engine Oil Pressure Sensor - If Equipped 3126B Engine for Caterpillar Built Machines
Atmospheric Pressure Sensor - If Equipped 3126B Engine for Caterpillar Built Machines
Inlet Air Temperature Sensor 3126B Engine for Caterpillar Built Machines
Injection Actuation Pressure Sensor 3126B Engine for Caterpillar Built Machines
Coolant Temperature Sensor 3126B Engine for Caterpillar Built Machines
Engine Oil Temperature Sensor 3126B Engine for Caterpillar Built Machines
Fuel Pressure Sensor 3126B Engine for Caterpillar Built Machines
Speed/Timing Sensor 3126B Engine for Caterpillar Built Machines
Turbocharger Outlet Pressure Sensor 3126B Engine for Caterpillar Built Machines
Speed Sensor (Transmission Output) 120H and 135H Motor Graders Power Train
Temperature Sensor (Transmission Oil) 120H and 135H Motor Graders Power Train
Speed Sensor (Transmission Input) 120H and 135H Motor Graders Power Train
Speed Sensor 3126B Engine for Caterpillar Built Machines
Pressure Sensor (Hydraulic Fan) 120H and 135H Motor Graders Hydraulic and Steering System

Sensors 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

Position Sensor (Clutch Pedal) - Calibrate 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

CID 0261 FMI 13 Engine Timing Calibration required 3126B Engine for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt 3126B Engine for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground 3126B Engine for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt 3126B Engine for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground 3126B Engine for Caterpillar Built Machines
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt 3126B Engine for Caterpillar Built Machines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground 3126B Engine for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt 3126B Engine for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground 3126B Engine for Caterpillar Built Machines
Sensor Dynamic Operation 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Pulse Width Modulated Sensor 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
CID 0094 FMI 03 Fuel Pressure open/short to +batt 3126B Engine for Caterpillar Built Machines
CID 0094 FMI 04 Fuel Pressure short to ground 3126B Engine for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt 3126B Engine for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground 3126B Engine for Caterpillar Built Machines
CID 0164 FMI 00 High Injector Actuation Pressure 3126B Engine for Caterpillar Built Machines
CID 0164 FMI 03 Injector Actuation Pressure voltage high 3126B Engine for Caterpillar Built Machines
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt 3126B Engine for Caterpillar Built Machines
CID 0175 FMI 04 Engine Oil Temperature short to ground 3126B Engine for Caterpillar Built Machines
Sensor Signal Voltage 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
MID 030 - CID 0263 - FMI 03 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
MID 030 - CID 0263 - FMI 04 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
MID 030 - CID 0601 - FMI 08 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
CID 0164 FMI 11 Injector Actuation Pressure system fault 3126B Engine for Caterpillar Built Machines
CID 0190 FMI 02 Loss of Engine Speed Signal 3126B Engine for Caterpillar Built Machines
CID 0190 FMI 11 Engine Speed Sensor mechanical failure 3126B Engine for Caterpillar Built Machines
Engine Speed/Timing Sensor Circuit - Test 3126B Engine for Caterpillar Built Machines
Engine Speed/Timing Sensor - Calibrate 3126B Engine for Caterpillar Built Machines
MID 081 - CID 0177 - FMI 03 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 0177 - FMI 04 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 0573 - FMI 03 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 0573 - FMI 04 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 0573 - FMI 13 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 0585 - FMI 02 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 0669 - FMI 02 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 0673 - FMI 02 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Throttle Position Sensor Circuit - Test 3126B Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test 3126B Engine for Caterpillar Built Machines
CID 0164 FMI 02 Injector Actuation Pressure signal erratic 3126B Engine for Caterpillar Built Machines
CID 0342 FMI 02 Loss of Secondary Engine Speed signal 3126B Engine for Caterpillar Built Machines
Engine Temperature Sensor Open or Short Circuit - Test 3126B Engine for Caterpillar Built Machines
MID 030 - CID 0084 - FMI 08 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
CID 0164 FMI 04 Injector Actuation Pressure voltage low 3126B Engine for Caterpillar Built Machines
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure 3126B Engine for Caterpillar Built Machines
Injection Actuation Pressure Sensor - Test 3126B Engine for Caterpillar Built Machines
Sensors and Electrical Connectors 3126B Engine for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test 3126B Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test 3126B Engine for Caterpillar Built Machines
MID 122 - CID 0269 - FMI 03 Product Link 121S/300
MID 122 - CID 0269 - FMI 04 Product Link 121S/300

A New Speed Sensor is Available {1907} 2004/03/08
Correction to Troubleshooting Manual, &quot;Sensor Signal Voltage&quot; {5574} 2004/09/20
Coolant Level Sensor Installation Service Notes {5574} 2008/07/14
Improved AS400C Angle Sensors That Are Used With AccuGrade<SUP>&reg;</SUP> Systems Are Now Available {5953} 2007/05/14
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562} 2012/10/04
Improved Rotary Position Sensor Is Now Used on Certain Cat<SUP>&reg;</SUP> Products {1439, 1913, 4806, 4809, 5736, 5737} 2012/07/11

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439} Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Incorrect Output Signal from Rotary Position Sensor in Certain Cat Products{1913, 4809, 5737} Incorrect Output Signal from Rotary Position Sensor in Certain Cat Products{1913, 4809, 5737}
Procedure to Test the Position Sensor of a Hydraulic Cylinder{1439, 7562} Procedure to Test the Position Sensor of a Hydraulic Cylinder{1439, 7562}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562} Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor{5574, 5736} Reuse Guideline for Hydraulic Cylinder Position Sensor{5574, 5736}
SOLENOID GP

Engine Fan Control Solenoid Circuit - Test 3126B Engine for Caterpillar Built Machines

Air Inlet Heater Solenoid - Remove and Install 3126B Engines for Caterpillar Built Machines
Differential Lock Valve - Remove and Install 120H and 135H Motor Graders Power Train
STARTING AID GP

A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456} 2013/09/24

Procedure for the Application of Grease to Certain Ether Cylinder Assemblies{1456} Procedure for the Application of Grease to Certain Ether Cylinder Assemblies{1456}
STARTING MOTOR GP

Electric Starting Motor 3126B Engine for Caterpillar Built Machines

Pinion Clearance - Adjust 3126B Engines for CaterpillarBuilt Machines
Electric Starting System - Test 3126B Engines for CaterpillarBuilt Machines

Starting System 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

Electric Starting Motor - Remove and Install 3126B Engines for Caterpillar Built Machines
Electric Starting Motor - Remove and Install 120H and 135H Motor Graders 3126B Engine Supplement

Examine Failed Starting Motors to Understand the Reason for Failure {1453} 2002/10/28
An Improved Starting Motor Is Now Available {1453} 2007/10/22

Caterpillar Remanufactured Electric Starting Motors Are Improved {1453} 2011/05/16

Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469} Caterpillar PRELUB® Diagnostics{1469}
SWITCH GP

Magnetic Switch (Secondary Steering) 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Pressure Switch (Secondary Steering) 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Bypass Switch (Power Train Oil Filter) 120H and 135H Motor Graders Power Train
Temperature Switch (Hydraulic Oil) 120H and 135H Motor Graders Hydraulic and Steering System

Pressure Switch (Secondary Steering) 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Switches 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Pressure Switch (Refrigerant) All Products Air Conditioning and Heating R134a for All Caterpillar Machines

Limit Switch (Service Brake) - Test and Adjust 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes

Switch Circuits 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Switch Circuits 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Throttle Lock Switch Circuit - Test 3126B Engine for Caterpillar Built Machines
Engine Shutdown Switch Circuit - Test 3126B Engine for Caterpillar Built Machines
MID 114 - CID 2258 - FMI 03 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2258 - FMI 04 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2259 - FMI 03 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2259 - FMI 04 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2258 - FMI 04 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2259 - FMI 03 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2259 - FMI 04 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2260 - FMI 02 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2260 - FMI 03 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2260 - FMI 04 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2260 - FMI 07 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2258 - FMI 03 AccuGrade® GPS v11 for CD700
MID 114 - CID 2258 - FMI 07 AccuGrade® GPS v11 for CD700
Switch Circuits AccuGrade® GPS v11 for CD700

A New Oil Pressure Switch is Now Available {7421} 2005/05/09
Improved Procedure for Verifying the Operation of the Battery Disconnect System. {1411} 2009/05/04
New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809} 2011/06/06
An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000} 2011/12/01

Machine Start Switch Key May Not Fit Properly{1416} Machine Start Switch Key May Not Fit Properly{1416}
A Problem with the Centershift Lock Switch on Certain Motor Graders{1408, 1435} A Problem with the Centershift Lock Switch on Certain Motor Graders{1408, 1435}
Centershift Pin Puller Switch Is Shipped Unplugged<BR><BR>Addition To The Pre-Delivery Checklist{5220, 7332} Centershift Pin Puller Switch Is Shipped Unplugged

Addition To The Pre-Delivery Checklist{5220, 7332}

TOOLS

Service Tools 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Service Tools 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Using Caterpillar Electronic Technician to Determine Diagnostic Codes 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Service Tools 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Electronic Service Tools 3126B Engine for Caterpillar Built Machines
Service Tools AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Service Tools AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Service Tools AccuGrade® Laser (CB420)
Service Tools Product Link - PL522/523
Service Tools Product Link 121S/300

Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785} 2002/02/11
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is Now Available {0785} 2002/08/19
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785} 2005/03/07
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782} 2006/12/04
Updated Instruction For The Bypass Harness {0785, 1408} 2008/03/17
New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606} 2013/08/15

The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785} 2004/04/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408} 2006/03/20
Enhanced Voltmeter Leads Are Now Available {0785} 2006/02/01
Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785} 2006/10/16

Procedure to Access the License Information for Caterpillar Electronic Technician (CAT ET){0785} Procedure to Access the License Information for Caterpillar Electronic Technician (CAT ET){0785}
An Aid To Reading Multimeter Scales{0785} An Aid To Reading Multimeter Scales{0785}

348-5430 Multi-Tool Gp 2 {0709, 0769, 0785} 348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
317-7484 Communications Adapter 3{1900, 4800, 7490, 7600} 317-7484 Communications Adapter 3{1900, 4800, 7490, 7600}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553} Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the Communications Adapter 3{1900} Using the Communications Adapter 3{1900}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709} 146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709} Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709} 131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
VALVE GP

Solenoid Valve (Transmission Clutch) 120H and 135H Motor Graders Power Train
Solenoid Valve (Transmission Clutch) 120H and 135H Motor Graders Power Train
Solenoid Valve (Differential Lock) 120H and 135H Motor Graders Power Train
Solenoid Valve (Blade Cushion) 120H and 135H Motor Graders Hydraulic and Steering System
Selector and Pressure Control Valve 120H and 135H Motor Graders Power Train
Selector and Pressure Control Valve 120H and 135H Motor Graders Power Train
Selector and Pressure Control Valve 120H and 135H Motor Graders Power Train

Injection Actuation Pressure Control Valve Circuit - Test 3126B Engine for Caterpillar Built Machines
WARNING GP

Correct Polarity Is Required for Back-Up Alarm Functionality {7406} 2003/01/27
WIRING GP

Electronic Control Wiring Group 3126B Engine for Caterpillar Built Machines
Ball Switch (Centershift Indicator) 120H and 135H Motor Graders Hydraulic and Steering System

Action Lamp 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Action Alarm 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

Electrical Connector - Inspect 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Wiring Harness (Short Circuit) - Test 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Wiring Harness (Open Circuit) - Test 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Electrical Connector - Inspect 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Wiring Harness (Open Circuit) - Test 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Wiring Harness (Short Circuit) - Test 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Electrical Connector - Inspect AccuGrade® Laser (CB420)
Wiring Harness (Open Circuit) - Test AccuGrade® Laser (CB420)
Wiring Harness (Short Circuit) - Test AccuGrade® Laser (CB420)
Electrical Connector - Inspect AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Wiring Harness (Open Circuit) - Test AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Wiring Harness (Short Circuit) - Test AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Electrical Connector - Inspect AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Wiring Harness (Open Circuit) - Test AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Wiring Harness (Short Circuit) - Test AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Connector Contact Description AccuGrade® Laser (CB420)
Connector Contact Description AccuGrade® GPS v11 for CD700
Electrical Connector - Inspect Product Link - PL522/523
Wiring Harness (Open Circuit) - Test Product Link - PL522/523
Wiring Harness (Short Circuit) - Test Product Link - PL522/523
Electrical Connector - Inspect Product Link 121S/300
Wiring Harness (Open Circuit) - Test Product Link 121S/300
Wiring Harness (Short Circuit) - Test Product Link 121S/300

Electrical Connectors - Inspect 3126B Engine for Caterpillar Built Machines
CID 0548 FMI 06 Throttle Lock Lamp short 3126B Engine for Caterpillar Built Machines
CID 0548 FMI 05 Throttle Lock Lamp open circuit 3126B Engine for Caterpillar Built Machines
MID 030 - CID 0324 - FMI 03 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
MID 030 - CID 0324 - FMI 05 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
MID 030 - CID 0324 - FMI 06 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
CID 0042 FMI 11 Inject Actuation Control Valve open/short 3126B Engine for Caterpillar Built Machines
Electrical Component and Connector Locations 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Switch Circuits 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Alert Indicator Is Always Flashing 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Alert Indicator Never Flashes 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal 3126B Engine for Caterpillar Built Machines
CID 1627 FMI 05 Fuel Pump Relay open circuit 3126B Engine for Caterpillar Built Machines
CID 1627 FMI 06 Fuel Pump Relay short to ground 3126B Engine for Caterpillar Built Machines
Connector Locations 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 0868 - FMI 03 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 0868 - FMI 05 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 0868 - FMI 06 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 0444 - FMI 03 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 0444 - FMI 05 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 0444 - FMI 06 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1484 - FMI 03 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1484 - FMI 04 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Throttle Lock Lamp Circuit - Test 3126B Engine for Caterpillar Built Machines
Air Inlet Heater Circuit - Test 3126B Engine for Caterpillar Built Machines
Engine Wiring Information 3126B Engine for Caterpillar Built Machines
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm 3126B Engine for Caterpillar Built Machines
MID 114 - CID 1396 - FMI 03 AccuGrade® Laser (CB420)
MID 114 - CID 1396 - FMI 05 AccuGrade® Laser (CB420)
MID 114 - CID 1396 - FMI 06 AccuGrade® Laser (CB420)
MID 114 - CID 1396 - FMI 03 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 1396 - FMI 05 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 1396 - FMI 06 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 1396 - FMI 03 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 1396 - FMI 05 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 1396 - FMI 06 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553} 2012/05/04
New Wiring Groups for the Steering Console Include an Improved Fuse Block {1408, 4334} 2004/02/23
Improved Pressure Switch Now Used {1435} 2004/04/19
Cable Assembly Has Been Rerouted for Improved Service Life {1408} 2005/02/07
Service of the Machined Terminals and the Stamped and Formed Terminals {7553} 2006/11/13
An Improved Wiring Group is Available {1408} 2008/09/22
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408} 2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408} 2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556} 2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459} 2012/09/21

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408} 2010/05/13

Fuses - Replace 120H and 135H Motor Graders
Circuit Breakers - Reset 120H and 135H Motor Graders

Cross-Reference for Electrical Connectors{7553} Cross-Reference for Electrical Connectors{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553} Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553} Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Guidelines for Routing and Installing Wire Harness Assemblies{1408, 7553} Guidelines for Routing and Installing Wire Harness Assemblies{1408, 7553}
Repair Procedure for Damaged Harness Wiring{1408} Repair Procedure for Damaged Harness Wiring{1408}

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

A NEW INJECTION ACTUATION PRESSURE CONTROL VALVE CONNECTOR INCREASES ENGINE OPERATION A NEW INJECTION ACTUATION PRESSURE CONTROL VALVE CONNECTOR INCREASES ENGINE OPERATION
Removal of the AccuGrade<SUP>TM</SUP> GPS Coiled Cables{4459} Removal of the AccuGradeTM GPS Coiled Cables{4459}

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408} Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
ELECTRONICS GP-MONITOR

Odometer Mode 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Related Components 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Service Meter Mode 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Scrolling Mode 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Main Display Module 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Units Mode 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Tachometer Mode 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Harness Code Mode 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
General Information 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Modes of Operation 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Normal Mode 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Numeric Readout Mode 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Service Mode 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Tattletale Mode 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Warning Operation 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Alert Indicator Description 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Component Description 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Additional Operator Modes 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Calibration Mode 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Articulation Gauge Calibration Mode 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Setup Mode 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

Glossary of Terms 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
System Self Test 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Module - Replace 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Main Display Module Initialization - Adjust 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Connector Contact Description of Main Display Module 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Main Display Module - Flash Program 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

MID 030 - CID 0248 - FMI 02 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
MID 030 - CID 0821 - FMI 03 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
MID 030 - CID 0821 - FMI 04 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
MID 030 - CID 0819 - FMI 02 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
General Information 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Diagnostic Code List 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Diagnostic Capabilities 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Using Caterpillar Monitoring System to Determine Diagnostic Codes 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Using Caterpillar Electronic Technician to Determine Diagnostic Codes 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

New Caterpillar Monitoring Software Is Now Available {7620} 2007/01/01
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link 522 Systems {7494, 7606, 7620} 2012/10/03

Logged Codes Must Be Cleared During Pre-delivery Inspections Logged Codes Must Be Cleared During Pre-delivery Inspections
Trip Odometer on Certain H-Series Motor Graders Trip Odometer on Certain H-Series Motor Graders
HEATER GP

Air Inlet Heater 3126B Engine for Caterpillar Built Machines
ELECTRONICS GP-COMMUNICATION

System Overview Product Link 121S/300
System Overview Product Link - PL522/523
System Components Product Link - PL522/523
Configuration Product Link - PL522/523
Installation Parameters Configure Product Link - PL522/523
Spare Input Configure Product Link - PL522/523
Commands Product Link - PL522/523
System Components Product Link 121S/300
Spare Inputs Product Link 121S/300
Configuration Product Link 121S/300
Installation Parameters Configure Product Link 121S/300
Report Parameters Configure Product Link 121S/300
Wireless Service Configure Product Link 121S/300
Spare Input Configure Product Link 121S/300
Commands Product Link 121S/300

Electronic Control Module (ECM) - Flash Program Product Link - PL522/523
Electronic Control Module (ECM) - Replace Product Link - PL522/523
Specifications Product Link - PL522/523
Electronic Control Module (ECM) - Flash Program Product Link 121S/300
Electronic Control Module (ECM) - Replace Product Link 121S/300
Specifications Product Link 121S/300

General Information Product Link - PL522/523
Diagnostic Capabilities Product Link - PL522/523
Electronic Service Tool Does Not Communicate with ECM Product Link - PL522/523
Reports and Messages Not Available Product Link - PL522/523
Position Reports Not Available Product Link - PL522/523
Reporting Interval Erratic Product Link - PL522/523
Diagnostics and Events Not Available Product Link - PL522/523
Operating Hours Discrepancy Product Link - PL522/523
Diagnostic Code List Product Link - PL522/523
MID 161 - CID 0254 - FMI 04 Product Link - PL522/523
MID 161 - CID 0254 - FMI 12 Product Link - PL522/523
MID 161 - CID 1250 - FMI 09 Product Link - PL522/523
MID 161 - CID 1888 - FMI 14 Product Link - PL522/523
MID 161 - CID 3766- FMI 14 Product Link - PL522/523
General Information Product Link 121S/300
Diagnostic Capabilities Product Link 121S/300
Electronic Service Tool Does Not Communicate with ECM Product Link 121S/300
Position Reports Not Available Product Link 121S/300
Reporting Interval Erratic Product Link 121S/300
Diagnostics and Events Not Available Product Link 121S/300
Operating Hours Discrepancy Product Link 121S/300
Diagnostic Code List Product Link 121S/300
MID 122 - CID 0254 - FMI 04 Product Link 121S/300
MID 122 - CID 0254 - FMI 12 Product Link 121S/300
MID 122 - CID 1250 - FMI 09 Product Link 121S/300
ECM Does Not Communicate with User Interface Product Link 121S/300

New Flash File Software Is Used for Product Link 151/201 {7606, 7620} 2002/07/15
New Flexible Antenna Whip Available for Product Link {7606} 2002/12/02
New Flash File Software Is Used for Product Link 151/201 {7620} 2003/03/10
New Software Is Used on Product Link 151/201 {7606, 7620} 2003/09/01
Product Link Cellular Is Now Available {7602} 2004/08/02
Correction to Special Instruction, REHS2143, "Product Link PL-102C System Installation" {7602} 2004/08/02
Correction to Special Instruction, &quot;Product Link PL102C System Installation&quot; and Systems Operation, Testing and Adjust, &quot;Product Link PL102C&quot; {7602} 2004/12/13
New PC Service Tool Software Released for Cellular Based Product Link {7620} 2004/12/20
Correction to Special Instruction, "Product Link PL102C System Installation" {7620} 2004/12/13
Procedure to Identify which COM PORT the USB Device Is Occupying and the Procedure to Change the Default COM PORT Setting {7606} 2005/01/10
New Product Link Software Available for PL151 and PL201 {7606} 2005/01/10
New Product Link Systems Are Now Available {7606} 2005/02/07
New Software Available for Product Link PL-151 and PL-201 {7620} 2005/05/02
New Product Link Software Is Now Available {7606, 7620} 2005/12/19
New Software Available for Product Link {7606, 7620} 2006/10/16
New Product Link Software Is Now Available {7606, 7620} 2007/05/14
New Product Link Hardware Is Now Available {7606} 2007/05/07
New Software for Product Link is Now Available {7606, 7620} 2008/03/10
New Software for Product Link is Now Available {7606, 7620} 2008/05/19
New Software is Now Used for the Product Link PL121SR and PL321SR Systems {7606, 7620} 2009/10/15
New Software for Product Link (PL300) Is Now Available {7606, 7620} 2011/10/11
New Software Is Now Available for Product Link (PL 121) {7602, 7610, 7620} 2011/12/15
Improved Process for Activating Product Link PL522 On Assets In China {7606} 2012/11/19
Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606} 2014/03/10
New Software Is Now Available For Product Link 522 Systems On All Cat<SUP>&reg;</SUP> Products {7606, 7620} 2013/05/28
Improved VisionLink<SUP>TM</SUP>Store is Now Available for all Caterpillar Products {7606} 2013/03/29
Device Transfers Are Now Supported In VisionLink<SUP>TM</SUP> Store {7606} 2013/03/29
Improved VisionLink<SUP>TM</SUP> Store for Minimizing Delay in Appearance of VisionLink Store - Modules is Now Available for All Caterpillar Products {7606} 2013/03/29
New Product Link Software for PL121 and PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7610, 7620} 2013/05/02
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link 522 System {7606} 2013/09/27
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620} 2013/07/08
New Software Is Now Available For All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620} 2013/08/19
Procedure for Improving Antenna Communication on All Machines Equipped With Product Link {733B, 7606} 2013/09/16
Improvements for Products and Systems Connected to Product Link {7606} 2013/10/02
New Product Link Software for PL300 Is Now Available for All Cat <SUP>&reg;</SUP>Products {7606, 7620} 2013/10/21
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link PL421 or Product Link PL420 System {7606} 2013/10/02
Improved Product Link Satellite System Special Instruction guide {7606} 2013/12/20
New Software for Product Link PL522 Module Is Now Available {7606} 2014/03/04

General Hazard Information Product Link - 121SR/321SR/420/421/ 522/523
Safety Signs and Labels Product Link - 121SR/321SR/420/421/ 522/523

Product Link MODEM Programming with Cat Electronic Technician (ET){7606, 7620} Product Link MODEM Programming with Cat Electronic Technician (ET){7606, 7620}
Guidelines For Installing Product Link On Certain Motor Graders{7602} Guidelines For Installing Product Link On Certain Motor Graders{7602}
Product Link PL-102C System Installation{7606} Product Link PL-102C System Installation{7606}
Product Link PL-102C{7602} Product Link PL-102C{7602}
Installation Guide for Product Link PL121SR and PL321{7606} Installation Guide for Product Link PL121SR and PL321{7606}
Operation of Product Link{7606} Operation of Product Link{7606}
Product Link PL121SR{7606} Product Link PL121SR{7606}
Release Notes for VisionLink and VisionLink Store for All Caterpillar Products{7606} Release Notes for VisionLink and VisionLink Store for All Caterpillar Products{7606}

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321). PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT IMPROVEMENT PROGRAM FOR FLASHING SOFTWARE ON THE PRODUCT LINK PL300 MODULE ON CERTAIN CATERPILLAR PRODUCTS PRODUCT IMPROVEMENT PROGRAM FOR FLASHING SOFTWARE ON THE PRODUCT LINK PL300 MODULE ON CERTAIN CATERPILLAR PRODUCTS

Product Link Antenna Placement{7606} Product Link Antenna Placement{7606}
Product Link Hours Versus Service Meter Hours Accuracy Issue{7606} Product Link Hours Versus Service Meter Hours Accuracy Issue{7606}
Product Link PL321 May Accumulate 24 Hours Daily{7606} Product Link PL321 May Accumulate 24 Hours Daily{7606}
Registration of Product Link in EquipmentManager{7606} Registration of Product Link in EquipmentManager{7606}
Location Updates Are Not Being Reported From The Product Link PL321{7606} Location Updates Are Not Being Reported From The Product Link PL321{7606}
Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat<SUP>&reg;</SUP> Machines Equipped With VIMS3G{7601, 7620} Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat® Machines Equipped With VIMS3G{7601, 7620}
CAMERA GP

Generic Installation of the WAVS Cleaning System{7348} Generic Installation of the WAVS Cleaning System{7348}
ENGINE ARRANGEMENT
ENGINE AR

Engine Design 3126B Engine for Caterpillar Built Machines

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000} 2001/01/08
Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000} 2012/09/17
A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000} 2002/03/25
Responsibilities for Emission Certified Engines {1000} 2005/10/03
Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000} 2009/04/27
Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000} 2009/11/18
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570} 2011/02/17

Improved Registration Process for Retrofit Products {1000, 7000} 2011/04/15

Storage Procedure For Caterpillar Products{0355, 1000, 7000} Storage Procedure For Caterpillar Products{0355, 1000, 7000}
Instructions to Register the Retrofit{1000, 3000, 7000, 7570} Instructions to Register the Retrofit{1000, 3000, 7000, 7570}

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752} A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000} 142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562} HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
TOOLS

New Kits Are Available to Repair Cracks and Threads in Ductile Iron {0676, 0685} 2006/02/06

Using Lock-N-Stitch Procedures for Casting Repair{0676, 0685} Using Lock-N-Stitch Procedures for Casting Repair{0676, 0685}
FRAME AND BODY
AXLE GP

Front Axle 120H and 135H Motor Graders Hydraulic and Steering System

Axle Toe-In (Front) - Adjust 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System

Front Axle - Remove 120H and 135H Motor Graders Power Train
Front Axle - Install 120H and 135H Motor Graders Power Train
Wheel Spindle and Wheel Spindle Housing - Remove 120H and 135H Motor Graders Power Train
Wheel Spindle and Wheel Spindle Housing - Install 120H and 135H Motor Graders Power Train
Wheel Spindle - Remove 120H and 135H Motor Graders Power Train
Wheel Spindle - Install 120H and 135H Motor Graders Power Train
Wheel Lean Arm and Axle Bushings - Remove 120H and 135H Motor Graders Machine Systems
Wheel Lean Arm and Axle Bushings - Install 120H and 135H Motor Graders Machine Systems
Wheel Lean Bar - Remove and Install 120H and 135H Motor Graders Machine Systems

A New Zero Degree Lean Bar Is Now Available on Certain Motor Graders {4305, 4313, 5225} 2010/12/14
The Toe-In Adjustment Procedure has been Updated {4313} 2008/09/29

Kingpin Bearings - Lubricate 120H and 135H Motor Graders
Wheel Bearing Oil (Front) - Change 120H and 135H Motor Graders
Axle Oscillation Bearings - Lubricate 120H and 135H Motor Graders
Wheel Bearing Oil Level (Front) - Check 120H and 135H Motor Graders
Wheel Lean Bearings - Lubricate 120H and 135H Motor Graders
Wheel Lean Cylinder Bearings - Lubricate 120H and 135H Motor Graders
Wheel Lean Bar Bearings - Lubricate 120H and 135H Motor Graders

Rebuilding Front Axles, Spindle Housings, Leaning Arms, and Lean Bars{4313, 5211, 5225} Rebuilding Front Axles, Spindle Housings, Leaning Arms, and Lean Bars{4313, 5211, 5225}
CASE & FRAME GP

Case and Frame 120H and 135H Motor Graders Power Train

Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders{7050, 7051, 7065, 7066} Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders{7050, 7051, 7065, 7066}
COVER GP

The 126-6933 Cover Group Attachment May Need to Be Adjusted on certain Motor Graders The 126-6933 Cover Group Attachment May Need to Be Adjusted on certain Motor Graders
DOOR GP

Access Doors and Covers 120H and 135H Motor Graders
ENCLOSURE GP

New Latch Assembly for Motor Graders {7263} 2008/02/04

Procedure for Replacement of Motor Grader Door Latches for Engine Enclosure{7263} Procedure for Replacement of Motor Grader Door Latches for Engine Enclosure{7263}

PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE ENCLOSURE LATCHES ON CERTAIN 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H, AND 16H MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE ENCLOSURE LATCHES ON CERTAIN 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H, AND 16H MOTOR GRADERS
FRAME GP

Front Frame from Rear Frame (Articulating Hitch) - Separate 120H and 135H Motor Graders Machine Systems
Front Frame to Rear Frame (Articulating Hitch) - Connect 120H and 135H Motor Graders Machine Systems

Articulation Bearings - Lubricate 120H and 135H Motor Graders

Welding Repair of Motor Grader Frame{0679, 7051} Welding Repair of Motor Grader Frame{0679, 7051}
GUARD GP

Drive Shaft Shield (Pump Drive Shaft) 120H and 135H Motor Graders Hydraulic and Steering System
HITCH GP
Articulated Hitch 120H and 135H Motor Graders Hydraulic and Steering System
HOOD GP

Engine Enclosure (Hood) - Remove 120H and 135H Motor Graders 3126B Engine Supplement
Engine Enclosure (Hood) - Install 120H and 135H Motor Graders 3126B Engine Supplement
LINES GP

A New Lubrication Group for the Circle Drive Pinion Is Available {5207, 7510, 7540} 2012/04/04
LINK GP-STEERING FRAME LOCK

Steering Frame Lock 120H and 135H Motor Graders
LINK GP-STEERING

Tie Rod (Steering) - Remove and Install 120H and 135H Motor Graders Machine Systems
SEAL GP

Assembly and Installation of Inverted Duo-Cone Seals{7561} Assembly and Installation of Inverted Duo-Cone Seals{7561}
SUPPORT GP

Rear Chassis Support - Remove 120H and 135H Motor Graders 3126B Engine Supplement
Rear Chassis Support - Install 120H and 135H Motor Graders 3126B Engine Supplement
TOOLS

148-0357 Front Strut Handling Group {0374, 0599, 0632, 0700, 0756} 148-0357 Front Strut Handling Group {0374, 0599, 0632, 0700, 0756}
FUEL SYSTEM
CONTROL GP-GOVERNOR

Governor Control 120H and 135H Motor Graders Power Train

Governor Control - Remove and Install 120H and 135H Motor Graders Machine Systems
FILTER GP-FUEL

Fuel Filter Base 3126B Engine for Caterpillar Built Machines
Fuel Filter and Water Separator 3126B Engine for Caterpillar Built Machines

Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install 120H and 135H Motor Graders 3126B Engine Supplement

The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263} 2011/03/21
New Primary Fuel Filters are Available {1260, 1261} 2008/07/14

Fuel System Water Separator Element - Replace 120H and 135H Motor Graders
Fuel System Secondary Filter - Replace 120H and 135H Motor Graders
Fuel System Water Separator - Drain 120H and 135H Motor Graders

Installation of Fuel/Water Separator{1260, 1263} Installation of Fuel/Water Separator{1260, 1263}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348} Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}

295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280} 295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}

CATERPILLAR REMAN ANNOUNCES THE INTRODUCTION OF REMANUFACTURED INJECTOR KITS FOR CERTAIN 3126B, C-12, and C15 ACERT ENGINES CATERPILLAR REMAN ANNOUNCES THE INTRODUCTION OF REMANUFACTURED INJECTOR KITS FOR CERTAIN 3126B, C-12, and C15 ACERT ENGINES
FUEL SYSTEM GP

370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280} 284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280} 284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713} Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706} 169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
LINES GP-FUEL

The Fuel Lines Groups are Updated {1261, 1274} 2007/07/16
Improvement to Quick Disconnect Couplings That are Used for Refueling Specific Motor Graders {1274} 2007/12/24
A Two Piece Clip and Grommet Are Used On the Fuel Lines On Certain C7 Through C18 Machine Engines {1250, 1250, 7553} 2013/09/02
LINES GP-FUEL INJECTION
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254} 2008/12/01

Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254} Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
NOZZLE GP-UNIT INJECTOR

Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713} 2008/05/19
PUMP GP-FUEL INJECTION

Injection Actuation Pressure Control Valve 3126B Engine for Caterpillar Built Machines
Unit Injector 3126B Engine for Caterpillar Built Machines
Unit Injector Hydraulic Pump 3126B Engine for Caterpillar Built Machines

Unit Injector - Test 3126B Engines for CaterpillarBuilt Machines

Injector Solenoid Circuit - Test 3126B Engine for Caterpillar Built Machines
CID 0001 FMI 11 Cylinder #1 Injector fault 3126B Engine for Caterpillar Built Machines
CID 0002 FMI 11 Cylinder #2 Injector fault 3126B Engine for Caterpillar Built Machines
CID 0003 FMI 11 Cylinder #3 Injector fault 3126B Engine for Caterpillar Built Machines
CID 0004 FMI 11 Cylinder #4 Injector fault 3126B Engine for Caterpillar Built Machines
CID 0005 FMI 11 Cylinder #5 Injector fault 3126B Engine for Caterpillar Built Machines
CID 0006 FMI 11 Cylinder #6 Injector fault 3126B Engine for Caterpillar Built Machines

Unit Injector - Remove 3126B Engines for Caterpillar Built Machines
Unit Injector - Install 3126B Engines for Caterpillar Built Machines

Improved O-Ring Seals for Fuel Injectors for Longer Seal Life {1254} 2003/10/20
Replacement of the Injection Actuation Pressure Control Valve {5051} 2004/03/22
Service Tips for the Hydraulic Electronic Unit Injector HEUI Pump {1714} 2006/03/13
Service Tips for the Hydraulic Electronic Unit Injector HEUI Pump {1714} 2010/08/26

Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286} Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}

REMANUFACTURED FUEL INJECTOR FOR VARIOUS 3126B & 3126E INDUSTRIAL, MACHINE AND ON-HIGHWAY TRUCK APPLICATIONS REMANUFACTURED FUEL INJECTOR FOR VARIOUS 3126B & 3126E INDUSTRIAL, MACHINE AND ON-HIGHWAY TRUCK APPLICATIONS
PUMP GP-FUEL PRIMING

Fuel System - Prime 3126B Engines for CaterpillarBuilt Machines
Fuel System - Prime 3126B Engines for CaterpillarBuilt Machines

Fuel Pump Relay Circuit - Test 3126B Engine for Caterpillar Built Machines

Fuel Priming Pump and Water Separator - Remove and Install 120H and 135H Motor Graders 3126B Engine Supplement

Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258} 2004/03/29
Replacement of the Priming Pump {1258, 1263} 2007/12/24
An Improved Hand Operated Fuel Priming Pump Is Available {1258} 2012/10/04

An Improved Hand Operated Fuel Priming Pump Is Available {1258} 2012/10/08

An Improved Hand Operated Fuel Priming Pump Is Available {1258} 2012/10/08

Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258} Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}

Faulty Fuel Priming Pumps on Various Engines Faulty Fuel Priming Pumps on Various Engines
PUMP GP-FUEL TRANSFER

Fuel Transfer Pump 3126B Engine for Caterpillar Built Machines

Fuel Transfer Pump - Remove - If Equipped 3126B Engines for Caterpillar Built Machines
Fuel Transfer Pump - Install - If Equipped 3126B Engines for Caterpillar Built Machines
PUMP GP-UNIT INJECTOR HYD

Injection Actuation Pressure - Test 3126B Engine for Caterpillar Built Machines

Injection Actuation Pressure Control Valve - Remove and Install 3126B Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Remove 3126B Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Install 3126B Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Remove and Install 120H and 135H Motor Graders 3126B Engine Supplement

Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714} Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714}
REGULATOR GP-FUEL PRESSURE

Fuel Pressure Regulator - Remove and Install 3126B Engines for Caterpillar Built Machines
TANK GP-FUEL

Fuel Tank 120H and 135H Motor Graders Power Train

Fuel Tank (Right Hand) - Remove 120H and 135H Motor Graders Machine Systems
Fuel Tank (Right Hand) - Install 120H and 135H Motor Graders Machine Systems
Fuel Tank (Left Hand) - Remove 120H and 135H Motor Graders Machine Systems
Fuel Tank (Left Hand) - Install 120H and 135H Motor Graders Machine Systems

Updated Fuel Tank Caps Are Now Available {1273} 2004/03/15
Updated Fuel Tank Caps Are Now Available {1273} 2003/12/22
Conversion Kits are Available to Convert Caterpillar or Wiggins Fast Fuel System Threaded Receivers to Caterpillar Flange Mounted Receivers {1710} 2004/03/29
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000} 2005/12/19
A Maximum Rate for Filling the Fuel System {1710} 2006/07/31
An Upgrade to the Fuel Tank Group Improves the Field Service of the Machines {1273} 2006/11/20

Fuel Tank Water and Sediment - Drain 120H and 135H Motor Graders
Fuel Tank Cap and Strainer - Clean 120H and 135H Motor Graders
Fuel System - Fill 120H and 135H Motor Graders

Use of Repair Kit for Nonmetallic Fuel Tanks{1273} Use of Repair Kit for Nonmetallic Fuel Tanks{1273}
Repair Process for Fuel Sump on Motor Graders{1273} Repair Process for Fuel Sump on Motor Graders{1273}
Procedure for Installing New Fuel Tanks{1273} Procedure for Installing New Fuel Tanks{1273}
TOOLS

9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706} 9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280} Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
HYDRAULIC SYSTEM
ACCUMULATOR GP

Accumulator (Steering) 120H and 135H Motor Graders Hydraulic and Steering System
Accumulator (Blade Cushion) 120H and 135H Motor Graders Hydraulic and Steering System
Accumulator (Steering) 120H and 135H Motor Graders Hydraulic and Steering System

Blade Cushion 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System

Accumulator (Blade Cushion) - Test and Charge 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Accumulator (Steering) - Test and Charge 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System

Accumulator (Blade Cushion) - Remove and Install 120H and 135H Motor Graders Machine Systems
Steering Accumulator - Remove and Install 120H and 135H Motor Graders Machine Systems

Steering Accumulator - Check - If Equipped 120H and 135H Motor Graders
Blade Cushion Accumulator - Check 120H and 135H Motor Graders

PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A STEERING ACCUMULATOR ON CERTAIN 12H, 14H, 16H, 120H, 135H, 140H, 143H, 160H, AND 163H MOTOR GRADERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A STEERING ACCUMULATOR ON CERTAIN 12H, 14H, 16H, 120H, 135H, 140H, 143H, 160H, AND 163H MOTOR GRADERS

Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474} Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
CENTERSHIFT GP

Centershift Lock Bar and Bushings - Remove 120H and 135H Motor Graders Machine Systems
Centershift Lock Bar and Bushings - Install 120H and 135H Motor Graders Machine Systems

Centershift Cylinder Socket - Lubricate 120H and 135H Motor Graders
Centershift Cylinder Socket - Check/Adjust/Replace 120H and 135H Motor Graders
Centershift Lock Bar - Clean/Lubricate 120H and 135H Motor Graders
CONTROL GP-CENTERSHIFT LOCK

Solenoid Valve (Centershift Lock) 120H and 135H Motor Graders Hydraulic and Steering System

Solenoid Valve (Centershift Lock) - Remove and Install 120H and 135H Motor Graders Machine Systems

Installation Of Control Valves For Implements {5051,5136,5214,5220,5226,5351,5115,5207,5266,5063} 1998/06/01
COUPLING GP
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057} 2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057} 2004/06/28
CYLINDER GP

Sideshift Cylinder 120H and 135H Motor Graders Hydraulic and Steering System
Wheel Lean Cylinder 120H and 135H Motor Graders Hydraulic and Steering System
Blade Lift Cylinder Mounting 120H and 135H Motor Graders Hydraulic and Steering System
Wheel Lean Cylinder and Mounting 120H and 135H Motor Graders Hydraulic and Steering System
Centershift Cylinder and Mounting 120H and 135H Motor Graders Hydraulic and Steering System
Blade Tip Cylinder 120H and 135H Motor Graders Hydraulic and Steering System
Articulation Cylinder 120H and 135H Motor Graders Hydraulic and Steering System
Steering Cylinder 120H and 135H Motor Graders Hydraulic and Steering System
Articulation Cylinder Mounting 120H and 135H Motor Graders Hydraulic and Steering System
Blade Lift Cylinder 120H and 135H Motor Graders Hydraulic and Steering System
Centershift Cylinder 120H and 135H Motor Graders Hydraulic and Steering System
Ripper Lift Cylinder 120H and 135H Motor Graders Hydraulic and Steering System
Scarifier Cylinder 120H and 135H Motor Graders Hydraulic and Steering System
Ripper Cylinder and Lines 120H and 135H Motor Graders Hydraulic and Steering System

Cylinder Cycle Time - Check 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Hydraulic Cylinder Drift - Check 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Steering System - Purge 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System

Blade Lift Cylinder - Remove and Install 120H and 135H Motor Graders Machine Systems
Blade Tip Cylinder - Remove and Install 120H and 135H Motor Graders Machine Systems
Wheel Lean Cylinder - Remove and Install 120H and 135H Motor Graders Machine Systems
Steering Cylinder - Remove and Install 120H and 135H Motor Graders Machine Systems
Sideshift Cylinder - Remove and Install 120H and 135H Motor Graders Machine Systems
Centershift Cylinder - Remove and Install 120H and 135H Motor Graders Machine Systems
Articulation Cylinder - Remove and Install 120H and 135H Motor Graders Machine Systems
Ripper Lift Cylinder - Remove and Install 120H and 135H Motor Graders Machine Systems

A New Locknut Improves Retention of the Retaining Pin {5229} 2005/01/24
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562} 2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562} 2010/04/30
New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562} 2010/12/24

Blade Lift Cylinder Socket - Check/Adjust/Replace 120H and 135H Motor Graders
Blade Lift Cylinder Socket - Lubricate 120H and 135H Motor Graders
Ripper Cylinder Bearings - Lubricate 120H and 135H Motor Graders

Adapting Older Rippers to Newer Motor Graders{5051, 5057, 5352, 6324, 6325} Adapting Older Rippers to Newer Motor Graders{5051, 5057, 5352, 6324, 6325}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562} Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562} Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562} Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process{7562} Hydraulic Cylinder Repair Process{7562}
Hydraulic Cylinder Honing{7562} Hydraulic Cylinder Honing{7562}

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 131-7191 BLADE TILT HYDRAULIC CYLINDER ON CERTAIN 12H, 120H, 135H, 140H, AND 160H MOTOR GRADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 131-7191 BLADE TILT HYDRAULIC CYLINDER ON CERTAIN 12H, 120H, 135H, 140H, AND 160H MOTOR GRADERS

Surface Finishes of Cylinder Bores{7562} Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562} Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738} Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 250-6597 Cylinder Washer Tank Group {0374, 0599, 0680, 0738} Procedures for Using the 250-6597 Cylinder Washer Tank Group {0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562} 1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562} Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095} 4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738} Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738} Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Hydraulic Cylinder Seal Failure Analysis{7555, 7562} Hydraulic Cylinder Seal Failure Analysis{7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components{7562} Inspection and Salvage of Hydraulic Cylinder Components{7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders{5100, 7562} Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders{5100, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562} Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
DRIVE GP

Circle Drive 120H and 135H Motor Graders Hydraulic and Steering System

Disc Pack Preload for Circle Drive - Adjust 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System

Circle Drive - Disassemble 120H and 135H Motor Graders Machine Systems
Circle Drive - Assemble 120H and 135H Motor Graders Machine Systems
Circle Drive - Remove 120H and 135H Motor Graders Machine Systems
Circle Drive - Install 120H and 135H Motor Graders Machine Systems

A New Lubrication Group for the Circle Drive Pinion Is Available {5207, 7510, 7540} 2005/02/21
Procedure To Test the Slip Clutch for the Circle Drive {5082, 5207, 5209} 2004/08/16
An Improved Circle Drive Pinion Is Now Used {5207} 2006/02/06
Circle Worm Drive Has Been Improved on Certain Motor Graders {5207} 2008/05/12
An Improved Pinion Shaft with a New Rugged Bolted Joint Provides Consistent Torque on the Circle Drive {5207} 2008/05/12

Circle Clearances - Check/Adjust 120H and 135H Motor Graders
Circle Drive Oil - Change 120H and 135H Motor Graders
Circle Drive Oil Level - Check 120H and 135H Motor Graders
Circle Drive Pinion Teeth - Lubricate 120H and 135H Motor Graders

Procedure to Install the New Pinion Shaft and Circle Worm Drive in the Circle Drive{5207} Procedure to Install the New Pinion Shaft and Circle Worm Drive in the Circle Drive{5207}

Motor Grader Circle Pinion Reuse{5207} Motor Grader Circle Pinion Reuse{5207}
Reusability of Worm Gear Sets{5207, 7552} Reusability of Worm Gear Sets{5207, 7552}
FILTER GP

Hydraulic Tank and Filter 120H and 135H Motor Graders Hydraulic and Steering System

Hydraulic Tank and Filter 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System

Hydraulic Tank and Filter - Remove and Install 120H and 135H Motor Graders Machine Systems

A Replacement Filter Is Incorrectly Identified {5050, 5068} 2002/12/23
Optional High Efficiency Filters Are Now Available {3004, 5068} 2003/07/07
Improved Canister for the Filter Housing {3004, 3067, 5068, 5091, 5092, 5093} 2008/08/18

Oil Filter - Inspect 120H and 135H Motor Graders
Hydraulic System Oil Filter - Replace 120H and 135H Motor Graders

PRODUCT SUPPORT PROGRAM FOR REPLACING THE FILTER HOUSING ON VARIOUS COMPACTORS, OFF-HIGHWAY TRUCKS, TRACK-TYPE TRACTORS, TRACK SKIDDERS, MOTOR GRADERS, WHEEL DOZERS, WHEEL LOADERS, AND WHEEL TRACTOR-SCRAPERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FILTER HOUSING ON VARIOUS COMPACTORS, OFF-HIGHWAY TRUCKS, TRACK-TYPE TRACTORS, TRACK SKIDDERS, MOTOR GRADERS, WHEEL DOZERS, WHEEL LOADERS, AND WHEEL TRACTOR-SCRAPERS

Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579} Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095} 188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
LINES GP

New Hydraulic Hoses Have Improved Durability {5057, 7000} 2005/08/01
The 6V-8633 Connector Has Changed {5057, 7553} 2005/11/28

358-4530, 358-4532, and 358-4533 Hose Machine Group Set-Up and Operation{0599, 0684} 358-4530, 358-4532, and 358-4533 Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057} Crimputer III Setup and Operation{0684, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057} Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057} Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057} Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057} 243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
LINES GP-HYDRAULIC

New Hose Assemblies Have Improved Service Life. {5057} 2005/04/18
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057} 2006/02/13

Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057} Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}

242-3567 Variable Crimp Die Bowl{0684} 242-3567 Variable Crimp Die Bowl{0684}
LINES GP-RIPPER

Special Instruction, SEHS9875, "Adapting Older Rippers to Newer Motor Graders" Is Available {5057, 6324, 6325} 2003/03/17

Ripper Tip - Inspect/Replace 120H and 135H Motor Graders
LINES GP-STEERING

Check Valve (Secondary Steering) 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System

New Routing of a Hydraulic Line Improves Service Life {4304} 2005/04/18
LOCK GP

Centershift Lock 120H and 135H Motor Graders Hydraulic and Steering System

Centershift Lock 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System

Centershift Lock - Remove 120H and 135H Motor Graders Machine Systems
Centershift Lock - Install 120H and 135H Motor Graders Machine Systems
Centershift Lock - Disassemble 120H and 135H Motor Graders Machine Systems
Centershift Lock - Assemble 120H and 135H Motor Graders Machine Systems

The Pin in the Centershift Lock Group is Updated {5221} 2007/10/01
MOTOR GP

Gerotor Motor (Circle Drive) 120H and 135H Motor Graders Hydraulic and Steering System
Gear Motor (Hydraulic Fan) 120H and 135H Motor Graders Hydraulic and Steering System

Gerotor Motor (Circle Drive) - Assemble 120H and 135H Motor Graders Machine Systems
Gerotor Motor (Circle Drive) - Disassemble 120H and 135H Motor Graders Machine Systems
Gerotor Motor (Circle Drive) - Remove 120H and 135H Motor Graders Machine Systems
Gerotor Motor (Circle Drive) - Install 120H and 135H Motor Graders Machine Systems

The Fan Motors are No Longer Painted {1386, 5061} 2003/06/30

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors{3203, 4351, 5058, 5070} Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors{3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070} Test Specifications for Vane Cartridges{0784, 5058, 5070}

Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551} Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11){5061, 506G, 5073} Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11){5061, 506G, 5073}

Pump and Motor Test Bench Course Description{0314, 0374, 5058, 5070} Pump and Motor Test Bench Course Description{0314, 0374, 5058, 5070}
Lesson Plan for Pump and Motor Test Bench Curriculum{0314, 0374, 5058, 5070} Lesson Plan for Pump and Motor Test Bench Curriculum{0314, 0374, 5058, 5070}
Pump and Motor Test Bench Curriculum{0374, 5058, 5070} Pump and Motor Test Bench Curriculum{0374, 5058, 5070}
PUMP GP

Metering Pump (Steering) 120H and 135H Motor Graders Hydraulic and Steering System
Steering Control 120H and 135H Motor Graders Hydraulic and Steering System
Electric Drive Pump (Secondary Steering) 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Pump Control Valve (Hydraulic Fan) 120H and 135H Motor Graders Hydraulic and Steering System
Piston Pump (Hydraulic Fan) 120H and 135H Motor Graders Hydraulic and Steering System
Pump Control Valve (Hydraulic, Steering) 120H and 135H Motor Graders Hydraulic and Steering System
Piston Pump (Hydraulic and Steering) 120H and 135H Motor Graders Hydraulic and Steering System
Metering Pump (Steering) 120H and 135H Motor Graders Hydraulic and Steering System

Piston Pump (Hydraulic Fan) 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Metering Pump (Steering) 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Piston Pump (Hydraulic and Steering) 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System

Bearing End Play (Piston Pump) - Adjust 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Pump Control Valve (Hydraulic, Steering) - Test and Adjust 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Piston Pump Cutoff Pressure (Hydraulic Fan) - Test and Adjust 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Piston Pump Margin Pressure (Hydraulic Fan) - Test and Adjust 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Steering Wheel Slip - Check 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System

Piston Pump (Hydraulic and Steering) - Disassemble 120H and 135H Motor Graders Machine Systems
Piston Pump (Hydraulic and Steering) - Assemble 120H and 135H Motor Graders Machine Systems
Piston Pump (Hydraulic Fan) - Disassemble 120H and 135H Motor Graders Machine Systems
Piston Pump (Hydraulic Fan) - Assemble 120H and 135H Motor Graders Machine Systems
Piston Pump (Hydraulic Fan) - Remove 120H and 135H Motor Graders Machine Systems
Piston Pump (Hydraulic Fan) - Install 120H and 135H Motor Graders Machine Systems
Piston Pump (Hydraulic and Steering) - Remove 120H and 135H Motor Graders Machine Systems
Piston Pump (Hydraulic and Steering) - Install 120H and 135H Motor Graders Machine Systems

A New Two-Piece Seal Is Used in Various Metering Pumps (Steering) and in the New 257-8471 Seal Kit {4312} 2004/12/20
Changes to the Metering Pump Group Improve the Reliability of the Horn {4312} 2004/12/20
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084} 2005/04/25
The Assembly Procedure for the Implement Pump Has Been Improved {5070} 2007/11/26

Nexus Gear Pump Porting{5073} Nexus Gear Pump Porting{5073}

Vane Type Hydraulic Pumps{5055} Vane Type Hydraulic Pumps{5055}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084} Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073} Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}

Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Vane Pumps{5055} Bench Test Procedure for Vane Pumps{5055}
PUMP GP-METERING

Metering Pump (Steering) - Remove and Install 120H and 135H Motor Graders Machine Systems

The Serviceability of Metering Pumps Has Been Limited {4312} 2005/12/19
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312} 2010/01/27
SHAFT GP

Pump Drive Shaft 120H and 135H Motor Graders Hydraulic and Steering System

Pump Drive Shaft - Remove and Install 120H and 135H Motor Graders Machine Systems
SWIVEL GP

Swivel 120H and 135H Motor Graders Hydraulic and Steering System

Swivel - Disassemble 120H and 135H Motor Graders Machine Systems
Swivel - Assemble 120H and 135H Motor Graders Machine Systems
Swivel - Remove 120H and 135H Motor Graders Machine Systems
Swivel - Install 120H and 135H Motor Graders Machine Systems
TANK GP

Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738} 2004/03/29

Hydraulic System Oil Level - Check 120H and 135H Motor Graders
Hydraulic System Oil - Change 120H and 135H Motor Graders

Hydraulic Tank Baffle on Motor Graders{4332, 5056, 5068} Hydraulic Tank Baffle on Motor Graders{4332, 5056, 5068}

204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068} 204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
TOOLS

New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738} 2004/05/03
Remove Certain 6D-7726 Hose Assemblies from Inventory {0738} 2005/12/12

Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050} 2010/10/01

Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050} 2010/09/10

Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center{0784} Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center{0784}

9U-5000 Series Hydraulic Test Bench {0599, 0738} 9U-5000 Series Hydraulic Test Bench {0599, 0738}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738} 4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY} TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057} Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057} Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}

Procedure for Filtration of Oil in the Motor Grader Tandem Drive{0680, 0738, 0768, 4062, 4064} Procedure for Filtration of Oil in the Motor Grader Tandem Drive{0680, 0738, 0768, 4062, 4064}
VALVE & LINKAGE GP

Valve and Linkage Group 120H and 135H Motor Graders Hydraulic and Steering System
VALVE GP

Relief Valve (Secondary Steering) - Test 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
VALVE GP-AIR CONTROL

Air Control Valve (Parking Brake) - Disassemble 120H and 135H Motor Graders Machine Systems
Air Control Valve (Parking Brake) - Assemble 120H and 135H Motor Graders Machine Systems
VALVE GP-BANK

Bank Valve (Grade Control) AccuGrade® Laser (CB420)

Bank Valve (Grade Control) - Calibrate AccuGrade® Laser (CB420)
Bank Valve (Grade Control) - Calibrate AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
Bank Valve (Grade Control) - Calibrate AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders

Hydraulic System AccuGrade® Laser (CB420)

Bank Valve - Disassemble - Bank Valve with Hydraulic Detent 120H and 135H Motor Graders Machine Systems
Bank Valve - Disassemble - Bank Valve with Mechanical Detent 120H and 135H Motor Graders Machine Systems
Bank Valve - Disassemble - Bank Valve with out Detent 120H and 135H Motor Graders Machine Systems
Bank Valve - Assemble - Bank Valve with Hydraulic Detent 120H and 135H Motor Graders Machine Systems
Bank Valve - Assemble - Bank Valve with Mechanical Detent 120H and 135H Motor Graders Machine Systems
Bank Valve - Assemble - Bank Valve with out Detent 120H and 135H Motor Graders Machine Systems
Bank Valve - Remove 120H and 135H Motor Graders Machine Systems
Bank Valve - Install 120H and 135H Motor Graders Machine Systems

New Torque Procedure for Certain Motor Grader Bank Valve Groups {5051} 2008/08/18
A New Pipe Plug Is Now Available for the Control Valve Group on Certain H Series and K Series Motor Graders {5051} 2013/03/28
VALVE GP-CHECK

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 229-5010 CARTRIDGE VALVE FROM DEALER PART STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 229-5010 CARTRIDGE VALVE FROM DEALER PART STOCK
VALVE GP-COMBINATION

Combination Valve 120H and 135H Motor Graders Hydraulic and Steering System
Combination Valve 120H and 135H Motor Graders Hydraulic and Steering System

Combination Valve 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System

Combination Valve - Disassemble 120H and 135H Motor Graders Machine Systems
Combination Valve - Assemble 120H and 135H Motor Graders Machine Systems
Combination Valve - Remove 120H and 135H Motor Graders Machine Systems
Combination Valve - Install 120H and 135H Motor Graders Machine Systems

A Previously Used Combination Valve Reduces Noise in the Cab {5064} 2009/03/16
VALVE GP-CONTROL

Control Valve (Blade Lift) 120H and 135H Motor Graders Hydraulic and Steering System
Control Valve (Scarifier) 120H and 135H Motor Graders Hydraulic and Steering System
Control Valve (Blade Tip) 120H and 135H Motor Graders Hydraulic and Steering System
Control Valve (Wheel Lean) 120H and 135H Motor Graders Hydraulic and Steering System
Control Valve (Circle Drive) 120H and 135H Motor Graders Hydraulic and Steering System
Control Valve (Articulation) 120H and 135H Motor Graders Hydraulic and Steering System
Control Valve (Sideshift) 120H and 135H Motor Graders Hydraulic and Steering System
Control Valve (Ripper) 120H and 135H Motor Graders Hydraulic and Steering System
Control Valve (Centershift) 120H and 135H Motor Graders Hydraulic and Steering System
Control Valve (Snow Plow/Dozer Lift) 120H and 135H Motor Graders Hydraulic and Steering System

Control Valve (Blade Lift) 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Control Valve (Implement) 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System

MID 114 - CID 2160 - FMI 03 AccuGrade® Laser (CB420)
MID 114 - CID 2160 - FMI 05 AccuGrade® Laser (CB420)
MID 114 - CID 2160 - FMI 06 AccuGrade® Laser (CB420)
MID 114 - CID 2161 - FMI 03 AccuGrade® Laser (CB420)
MID 114 - CID 2161 - FMI 05 AccuGrade® Laser (CB420)
MID 114 - CID 2161 - FMI 06 AccuGrade® Laser (CB420)
MID 114 - CID 2162 - FMI 03 AccuGrade® Laser (CB420)
MID 114 - CID 2162 - FMI 05 AccuGrade® Laser (CB420)
MID 114 - CID 2162 - FMI 06 AccuGrade® Laser (CB420)
MID 114 - CID 2163 - FMI 03 AccuGrade® Laser (CB420)
MID 114 - CID 2163 - FMI 05 AccuGrade® Laser (CB420)
MID 114 - CID 2163 - FMI 06 AccuGrade® Laser (CB420)
MID 114 - CID 2160 - FMI 03 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2160 - FMI 05 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2160 - FMI 06 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2161 - FMI 03 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2161 - FMI 05 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2161 - FMI 06 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2162 - FMI 03 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2162 - FMI 05 AccuGrade® GPS v11 for CD700
MID 114 - CID 2162 - FMI 06 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2163 - FMI 03 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2163 - FMI 05 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 2163 - FMI 06 AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders

The Check Valves on Certain Motor Graders Have Been Improved {5051} 2008/05/05
A new Check Valve Group Updates the Control Valve Groups {5051} 2008/12/22
The Plug in the Control Valve Groups is Updated {5051} 2008/12/29
An Updated Control Valve Lever is Available {5051} 2009/01/05
An Improved Spring is Available for the Compensator Valve on Certain K and H Series Motor Graders {5051} 2010/09/30
Improved Service Sections Have Been Developed for The Resolver Port and The Pressure Compensator on Certain H Series and K Series Motor Graders {5051} 2013/06/04

Repair Instructions for Control Valve Section Body on Certain H Series and K Series Motor Graders{5051} Repair Instructions for Control Valve Section Body on Certain H Series and K Series Motor Graders{5051}

Check for Poor Internal Surface Finish in the Control Valves on Certain Motor Graders{5051, 7750} Check for Poor Internal Surface Finish in the Control Valves on Certain Motor Graders{5051, 7750}
VALVE GP-RELIEF

Relief Valve (Implement) 120H and 135H Motor Graders Hydraulic and Steering System
Relief Valve (Steering) 120H and 135H Motor Graders Hydraulic and Steering System
Relief Valve (Signal) 120H and 135H Motor Graders Hydraulic and Steering System
Relief Valve (Blade Tip) 120H and 135H Motor Graders Hydraulic and Steering System
Relief Valve (Sideshift) 120H and 135H Motor Graders Hydraulic and Steering System
Relief Valve (Scarifier) 120H and 135H Motor Graders Hydraulic and Steering System
Relief Valve (Secondary Steering) 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Relief Valve (Blade Lift) 120H and 135H Motor Graders Hydraulic and Steering System
Relief Valve (Snow Plow/Dozer Lift) 120H and 135H Motor Graders Hydraulic and Steering System
Relief Valve (Scarifier) 120H and 135H Motor Graders Hydraulic and Steering System

Relief Valves (Implement) - Test and Adjust 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Relief Valve (Steering) - Test and Adjust 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System

A New Line Relief Valve for the Scarifier Is Now Used {5117} 2005/07/25

THE SCARIFIER MAY DRIFT ON CERTAIN MOTOR GRADERS THE SCARIFIER MAY DRIFT ON CERTAIN MOTOR GRADERS

Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117} Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
VALVE GP-SHUTTLE

Shuttle Valve 120H and 135H Motor Graders Hydraulic and Steering System
VALVE GP-SOLENOID
Solenoid Valve Mounting (Hydraulic Fan) 120H and 135H Motor Graders Hydraulic and Steering System
Solenoid Valve (Hydraulic Fan) 120H and 135H Motor Graders Hydraulic and Steering System

MID 114 - CID 2160 - FMI 03 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2160 - FMI 05 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2160 - FMI 06 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2161 - FMI 03 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2161 - FMI 05 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2161 - FMI 06 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2162 - FMI 03 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2162 - FMI 05 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2162 - FMI 06 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2163 - FMI 03 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2163 - FMI 05 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)
MID 114 - CID 2163 - FMI 06 AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope)

Solenoid Valve (Blade Cushion) - Remove and Install 120H and 135H Motor Graders Machine Systems
Solenoid Valve and Manifold (Hydraulic Fan) - Remove and Install 120H and 135H Motor Graders Machine Systems
IMPLEMENTS
CIRCLE GP

Circle 120H and 135H Motor Graders Hydraulic and Steering System

Drawbar - Remove 120H and 135H Motor Graders Machine Systems
Drawbar - Install 120H and 135H Motor Graders Machine Systems
Circle - Remove 120H and 135H Motor Graders Machine Systems
Circle - Install 120H and 135H Motor Graders Machine Systems

Special Instruction, SEHS7268, "Installation of Circle Repair Segments" Is Now Available {6152, 6154} 2004/05/03
Circle Tooth Profile and the Correct Use of Templates for the Installation of Circle Segments For Certain Motor Graders {6152, 6152} 2012/03/20
Steel Wear Strips are Available for the Circle Group on Certain Motor Graders {6152, 6154, 6155} 2009/11/16
Steel Wear Strips for the Circle Group May be Modified in Order to Make The Wear Strips Adjustable {6152, 6154, 6155} 2009/11/16
New Blade Mounting Group Wear Strips are Now Available On Certain H, K and K Series 2 Motor Graders {6152, 6154, 6155} 2014/03/27

Circle Top - Lubricate 120H and 135H Motor Graders

Installation of Circle Repair Segments For Certain Motor Graders{6152, 6152} Installation of Circle Repair Segments For Certain Motor Graders{6152, 6152}
DRAWBAR GP

Drawbar 120H and 135H Motor Graders Hydraulic and Steering System

Updated Wear Strips for Certain Motor Graders {6153} 2008/08/04

Drawbar Ball and Socket End Play - Check/Adjust 120H and 135H Motor Graders
Drawbar Ball and Socket - Lubricate 120H and 135H Motor Graders
LUBRICATION SYSTEM
BREATHER GP

Crankcase Breather 3126B Engine for Caterpillar Built Machines

Engine Crankcase Breather - Replace 120H and 135H Motor Graders
FILTER GP-ENGINE OIL

Engine Oil Filter Base 3126B Engine for Caterpillar Built Machines

Engine Oil Filter Base - Remove 3126B Engines for Caterpillar Built Machines
Engine Oil Filter Base - Install 3126B Engines for Caterpillar Built Machines
Engine Oil Filter Base - Disassemble 3126B Engines for Caterpillar Built Machines
Engine Oil Filter Base - Assemble 3126B Engines for Caterpillar Built Machines
Engine Oil Filter Base - Remove 120H and 135H Motor Graders 3126B Engine Supplement
Engine Oil Filter Base - Disassemble 120H and 135H Motor Graders 3126B Engine Supplement
Engine Oil Filter Base - Assemble 120H and 135H Motor Graders 3126B Engine Supplement
Engine Oil Filter Base - Install 120H and 135H Motor Graders 3126B Engine Supplement

New High Efficiency Oil Filters are Now Available {1308} 2004/03/22
Torque the Engine Oil Filter Base Properly {1306} 2006/01/02
New High Efficiency Oil Filters are Now Available {1308} 2006/07/03
OIL CHANGE GP-HIGH SPEED
New Cat QuickEvac<SUP>TM</SUP> High Speed Oil Change Arrangements Are Available {1302, 1372} 2003/03/10
New QuickEvac High Speed Oil Change Arrangements Are Available {1325} 2006/10/23

Installation and Operation of the Cat QuickEvac<SUP>TM</SUP> System{0707, 1325} Installation and Operation of the Cat QuickEvacTM System{0707, 1325}
Supplement to the Operation and Maintenance Manual{0707} Supplement to the Operation and Maintenance Manual{0707}
PUMP GP-ENGINE OIL

Engine Oil Pump 3126B Engine for Caterpillar Built Machines

Engine Oil Pump - Inspect 3126B Engines for CaterpillarBuilt Machines

Engine Oil Pump - Install 3126B Engines for Caterpillar Built Machines
Engine Oil Pump - Remove 3126B Engines for Caterpillar Built Machines
Engine Oil Pump - Assemble 3126B Engines for Caterpillar Built Machines
Engine Oil Pump - Disassemble 3126B Engines for Caterpillar Built Machines
MACHINE ARRANGEMENT
MACHINE AR

Service Intervals All Products Air Conditioning and Heating R134a for All Caterpillar Machines

General Welding Procedures{0679, 7000} General Welding Procedures{0679, 7000}
Installation of Cat<SUP>&reg;</SUP> Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders{7605} Installation of Cat® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders{7605}
MISCELLANEOUS INFORMATION

Heating and Air Conditioning Service Publications All Products Air Conditioning and Heating R134a for All Caterpillar Machines
TOOLS

A New Backing Pad Is Available for the 127 mm (5 inch) Rotary Grinding Disc {0674, 0677, 0685} 2009/10/19

142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122} 142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122} 362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
Torque Multipliers, Models 1U-7293, 6V-7820 and 6V-6080{0599, 0765} Torque Multipliers, Models 1U-7293, 6V-7820 and 6V-6080{0599, 0765}
OPERATOR STATION
AIR CONDITIONER GP

Refrigerant Compressor All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioner 120H and 135H Motor Graders Power Train
System Capacities for Refrigerant (Motor Graders) All Products Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Compressor All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Glossary of Terms All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Expansion Valve System All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Orifice Tube System All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Condenser All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Evaporator Coil All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Compressor Protection System All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Identifying the Air Conditioning System All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Expansion Valve All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Accumulator All Products Air Conditioning and Heating R134a for All Caterpillar Machines
In-line Refrigerant Dryer All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Receiver-Dryer All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Identifying the Heating System All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Temperature Control All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Identifying the Refrigerant All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Condensate Drainage System All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Cab Pressurization and Filtration System All Products Air Conditioning and Heating R134a for All Caterpillar Machines
General Information All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Orifice Tube Assembly All Products Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Recovery All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Manifold Gauge Set (Refrigerant) - Install All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant System - Charge All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant System - Evacuate All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Leakage - Test All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Manifold Gauge Set (Refrigerant) - Remove All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Electronic Heat Control - Test All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Compressor - Test All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning Performance - Test All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Oil - Test All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant System - Flush All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Machine Preparation for Testing and Adjusting All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Compressor Protection System - Test All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Heater Performance - Test All Products Air Conditioning and Heating R134a for All Caterpillar Machines

Required Tools All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Machine Preparation for Troubleshooting All Products Air Conditioning and Heating R134a for All Caterpillar Machines
General Troubleshooting Information All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Visual Inspection (Troubleshooting) All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Heating System Troubleshooting All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Troubleshooting Condensate Drainage System All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning System Troubleshooting All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Troubleshooting Heating and Air Conditioning Control System All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Automatic Temperature Control Panel Troubleshooting - 584 and 584HD Forwarders All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Automatic Temperature Control System (ECM Controlled) Troubleshooting All Products Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Expansion Valve - Remove and Install All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Compressor - Remove and Install All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Accumulator - Remove and Install All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Blower Motor (Air Conditioner and Heater) - Remove and Install 120H and 135H Motor Graders Machine Systems
Evaporator Coil and Heater Coil - Remove and Install 120H and 135H Motor Graders Machine Systems
Refrigerant Compressor - Remove and Install 120H and 135H Motor Graders 3126B Engine Supplement
Refrigerant Condenser - Remove and Install 120H and 135H Motor Graders 3126B Engine Supplement
Air Conditioner Lines - Remove and Install All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Machine Preparation for Disassembly and Assembly All Products Air Conditioning and Heating R134a for All Caterpillar Machines
In-Line Refrigerant Dryer - Remove and Install All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Receiver-Dryer - Remove and Install All Products Air Conditioning and Heating R134a for All Caterpillar Machines
General Information All Products Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Orifice Tube Assembly - Remove and Install All Products Air Conditioning and Heating R134a for All Caterpillar Machines

New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342} 2004/08/02
Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320} 2004/05/17
An Air Conditioner Kit for Use When Servicing the Air Conditioning System Is Now Available {7320, 7320} 2012/08/24

Evaporator Coil and Heater Coil - Clean 120H and 135H Motor Graders
Condenser (Refrigerant) - Clean 120H and 135H Motor Graders
Refrigerant Dryer - Replace 120H and 135H Motor Graders

Refrigerant Compressor Functional Test for All Caterpillar Machines{1802} Refrigerant Compressor Functional Test for All Caterpillar Machines{1802}
CAB GP

Cab - Remove 120H and 135H Motor Graders Machine Systems
Cab - Install 120H and 135H Motor Graders Machine Systems

Cab Certification {7323, 7325} 2005/03/21
Ordering a Replacement Operator Protective Structure (OPS) Certification Film {7323, 7325, 7405, 7557} 2007/02/12
Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557} 2009/07/27
A Procedure for Replacing Bonded Windows on All Caterpillar Products Is Now Available {7310} 2009/11/02

Rollover Protective Structure (ROPS) - Inspect 120H and 135H Motor Graders
Operator Controls 120H and 135H Motor Graders

Replacing Bonded Windows{7310} Replacing Bonded Windows{7310}
CONSOLE GP

Operator Console 120H and 135H Motor Graders Hydraulic and Steering System

A New Cylinder for the Operator's Console Improves Service Life {5258} 2003/06/23
CONTROL GP-BRAKE
Brass Fittings are Now Available for the Brake Valve on the Series H Motor Graders {3123, 4265, 4282, 5506} 2010/03/01
DOOR GP
A New Seal for the Cab Doors on the Motor Graders Improves Operator Comfort {7308, 7555} 2003/07/28
FILTER GP-CAB AIR

Cab Air Filter - Clean/Replace 120H and 135H Motor Graders
HORN GP

Air Horn 120H and 135H Motor Graders Air System and Brakes
Solenoid Valve (Air Horn) 120H and 135H Motor Graders Air System and Brakes

Air Horn 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
INDICATOR GP

New Gauges Available {7450} 2010/07/08
MIRROR GP

New Method for Shipping Mirrors for the Motor Graders New Method for Shipping Mirrors for the Motor Graders
MONITOR GP

A Repair Kit for the Magnet is Now Available for the AccuGrade CD700 Display {7490} 2009/05/04
Improved VisionLink<SUP>TM</SUP> Software Is Now Available for Certain Caterpillar Machines {7601} 2012/09/11
New Software For EMS III Is Now Used on Certain Cat<SUP>&reg;</SUP> Products {7478, 7490, 7620} 2013/11/06
Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606} 2013/04/04

Display Description AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope)
Display Description AccuGrade® - CD700 Grade Control System (GPS/ATS/Sonic/Cross Slope)
Display Description AccuGrade® Grade Control System - CD700
Display Description Accugrade® GPS (CD700)

WAVS Installation Guide for Generic Applications{7347, 7348} WAVS Installation Guide for Generic Applications{7347, 7348}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications){108F, 1091, 7490} Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications){108F, 1091, 7490}
Installation of Cat<SUP>&reg;</SUP> Terrain for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{7605} Installation of Cat® Terrain for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{7605}

AccuGrade File Limit{7490} AccuGrade File Limit{7490}
PANEL GP

Instrument Panel 120H and 135H Motor Graders Hydraulic and Steering System

Speedometer/Tachometer Module 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Display Components 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System
Quad Gauge Module 120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

Using Caterpillar Monitoring System to Determine Diagnostic Codes 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1580 - FMI 03 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1580 - FMI 05 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1580 - FMI 06 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

New Dash Lamp With Improved Service Life Is Now Available {7450, 7451} 2004/09/06
A New Gauge Is Used For More Accurate Pressure Readings {7450, 7451} 2004/10/04
RADIO GP
New Processes Improve Registration of Product Link {7338, 7606} 2008/04/14
A New Antenna For The Product Link Is Available {7010, 733T} 2008/06/09
New AccuGrade<SUP>&reg;</SUP> 450 MHz and 2400 MHz Radios Are Now Available {733T} 2008/11/03
New AccuGrade<SUP>&reg;</SUP> 900 MHz and 2400 MHz Radios are Now Available {733T} 2008/09/01
An Updated Entertainment Radio Is Now In Production On Certain Machines {7338, 733C} 2011/12/01

Miswiring Issues with Installation of the Product Link 121 and Product Link 321{7606} Miswiring Issues with Installation of the Product Link 121 and Product Link 321{7606}
Product Link Registration Problems{733T, 7606} Product Link Registration Problems{733T, 7606}

317-7492 Wireless Radio{7338} 317-7492 Wireless Radio{7338}
ROPS/FOPS GP

Rollover Protective Structure (ROPS) 120H and 135H Motor Graders Power Train

Inspection, Maintenance, and Repair of Operator Protective Structures (OPS) and Attachment Installation Guidelines for All Earthmoving Machinery, If Equipped{7323, 7325} Inspection, Maintenance, and Repair of Operator Protective Structures (OPS) and Attachment Installation Guidelines for All Earthmoving Machinery, If Equipped{7323, 7325}

Maintaining the Protective Structure (ROPS/FOPS) Certification when Making Modifications To (ROPS/FOPS){7323, 7325, 7715} Maintaining the Protective Structure (ROPS/FOPS) Certification when Making Modifications To (ROPS/FOPS){7323, 7325, 7715}
SEAT GP

Seat - Remove and Install 120H and 135H Motor Graders Machine Systems

Seat 120H and 135H Motor Graders
Seat Belt - Replace 120H and 135H Motor Graders
Seat Belt - Inspect 120H and 135H Motor Graders
Seat Belt 120H and 135H Motor Graders

Installing a Literature Compartment{7312} Installing a Literature Compartment{7312}
WASHER GP-WINDOW

Window Washer 120H and 135H Motor Graders Power Train

Washer Pump Assemblies Must Be Primed Properly {7306} 2002/12/23

Window Washer Reservoir - Fill 120H and 135H Motor Graders
WINDOW GP
Windows - Clean 120H and 135H Motor Graders
WIPER GP-WINDOW

Window Wipers 120H and 135H Motor Graders Power Train

Window Wiper and Wiper Motor (Rear) - Remove and Install 120H and 135H Motor Graders Machine Systems
Window Wiper and Wiper Motor (Front) - Remove and Install 120H and 135H Motor Graders Machine Systems

Improved Window Wiper Motors Now Used {7305} 2008/11/10
An Improved Wiper Motor is Now Available {7305} 2008/11/10

Window Wiper - Inspect/Replace 120H and 135H Motor Graders
CONTROL GP-JOYSTICK

MID 114 - CID 2258 - FMI 03 AccuGrade® Laser (CB420)
MID 114 - CID 2258 - FMI 04 AccuGrade® Laser (CB420)
MID 114 - CID 2259 - FMI 03 AccuGrade® Laser (CB420)
MID 114 - CID 2259 - FMI 04 AccuGrade® Laser (CB420)
MID 114 - CID 2259 - FMI 07 AccuGrade® Laser (CB420)
CONTROL GP-TRANSMISSION

Transmission Control (Shift Lever) - Test 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

MID 081 - CID 0668 - FMI 02 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 0668 - FMI 03 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

An Improved Transmission Control Is Now Used {3065} 2009/03/02
POWER TRAIN
AXLE GP
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050} 2004/04/12
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561} 2010/02/25

Inspection of the Duo-cone Seal Gp{4050, 4051, 7561} Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}

Specifications for Inspection of Driveline Fasteners{3030, 3101, 3159, 3253, 3258, 3278, 4050} Specifications for Inspection of Driveline Fasteners{3030, 3101, 3159, 3253, 3258, 3278, 4050}

Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines{0680, 0768, 3258, 3260, 4050} Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines{0680, 0768, 3258, 3260, 4050}
BRAKE GP

Parking Brake - Drain 120H and 135H Motor Graders
CHAIN GP

Drive Chain 120H and 135H Motor Graders Power Train

Drive Chain - Check 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

Drive Chain - Remove 120H and 135H Motor Graders Power Train
Drive Chain - Install 120H and 135H Motor Graders Power Train

Checking Chain Wear in Motor Grader Tandem Drives {3261, 4063} 2004/06/21
CONTROL GP-CLUTCH

Clutch Control (Modulation) 120H and 135H Motor Graders Power Train

Clutch Control - Test 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Clutch Pedal - Adjust 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
CONTROL GP-DIFFERENTIAL LOCK

Differential and Bevel Gear 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

Changes to the Differential Lock Control Group Increase the Service Life of the Differential Lock Hose On Certain H Series Motor Graders {3264, 5057} 2011/06/30
CONTROL GP-XMSN OIL SYSTEM
Procedure for Cleaning the Power Train {3065, 3139} 2014/03/21
CONTROL GP-TRANSMISSION HYD

Transmission Control Valve 120H and 135H Motor Graders Power Train

Transmission Control Valve 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

Transmission Lubrication Oil Pressure - Test 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Transmission Pressures - Test 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Initial Pressures - Test and Adjust 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Transmission Pressures - Test 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

The Transmission Control Group Has Been Improved {3073, 3167} 2008/04/14

Bench Test Procedure for a 120H, 12H, 12K, 135H, 140H, 140K, 143H, 160H, 160K, and 163HMotor Grader Transmission{3030, 3073, 3139} Bench Test Procedure for a 120H, 12H, 12K, 135H, 140H, 140K, 143H, 160H, 160K, and 163HMotor Grader Transmission{3030, 3073, 3139}
COUPLING GP

An Improved Coupling Assembly is Used {3252, 3279} 2006/12/25
DIFFERENTIAL & BEVEL GEAR GP

Differential and Bevel Gear 120H and 135H Motor Graders Power Train
Differential 120H and 135H Motor Graders Power Train

Differential and Bevel Gear - Test 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

Differential and Bevel Gear - Remove 120H and 135H Motor Graders Power Train
Differential and Bevel Gear - Disassemble 120H and 135H Motor Graders Power Train
Differential and Bevel Gear - Assemble 120H and 135H Motor Graders Power Train
Differential and Bevel Gear - Install 120H and 135H Motor Graders Power Train

Transmission and Differential Oil - Change 120H and 135H Motor Graders
Transmission and Differential Oil Filter and Screens - Replace/Clean 120H and 135H Motor Graders
Transmission and Differential Oil Level - Check 120H and 135H Motor Graders
Transmission and Differential Oil Sample - Obtain 120H and 135H Motor Graders

226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561} 226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}

Reusability of Drive Train Gears{3002, 3159, 3256, 4055} Reusability of Drive Train Gears{3002, 3159, 3256, 4055}
Procedure to Machine Damaged Transmission and Differential Yokes{3030, 3253, 3258} Procedure to Machine Damaged Transmission and Differential Yokes{3030, 3253, 3258}
DIFFERENTIAL GP

226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561} 226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
DRIVE GP

Drive Sprocket - Remove and Install 120H and 135H Motor Graders Power Train

Tandem Drive Oil Level - Check 120H and 135H Motor Graders
Tandem Drive Oil Sample - Obtain 120H and 135H Motor Graders
Tandem Drive Oil - Change 120H and 135H Motor Graders
DRUM GP

345-1236 Lifting Bracket{0599, 0629, 0632, 6605} 345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
FILTER GP

Oil Filter (Power Train) 120H and 135H Motor Graders Power Train

Transmission Oil Filter Base - Remove 120H and 135H Motor Graders Power Train
Transmission Oil Filter Base - Install 120H and 135H Motor Graders Power Train
Transmission Oil Filter Base - Disassemble 120H and 135H Motor Graders Power Train
Transmission Oil Filter Base - Assemble 120H and 135H Motor Graders Power Train

A Larger Filter for the Transmission Is Used {3067, 5068} 2005/12/19
Understanding Transmission Filter Plugging Events {3004, 3067} 2007/04/02
Improved Canister for the Filter Housing {3004, 3067, 5068, 5091, 5092, 5093} 2008/02/25
Enhancements to the Filtration System on the Drive Train Systems for Certain Caterpillar Products {3004, 3016, 3067, 3103, 3154} 2011/04/08

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 215-1868 TRANSMISSION FILTER DRAIN VALVE ON CERTAIN 12H, 120H, 135H, 140H, 143H, 160H, AND 163H MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 215-1868 TRANSMISSION FILTER DRAIN VALVE ON CERTAIN 12H, 120H, 135H, 140H, 143H, 160H, AND 163H MOTOR GRADERS

Use Only 6 Micron Filters on the Transmissions for the Newer Motor Graders Use Only 6 Micron Filters on the Transmissions for the Newer Motor Graders
Leaks In The Filter Housing{3004, 3067} Leaks In The Filter Housing{3004, 3067}
An Improved Filter Element for the Power Train has Been Released{3067, 5068} An Improved Filter Element for the Power Train has Been Released{3067, 5068}
LINES GP-POWER TRAIN OIL

Transmission Oil Lines 120H and 135H Motor Graders Power Train
PUMP GP
Gear Pump (Transmission Charging and Scavenge) 120H and 135H Motor Graders Power Train

Pump Efficiency (Gear Pumps) - Test 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Transmission Charging Pump Pressure - Test 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

Gear Pump (Transmission Charging and Scavenge) - Disassemble 120H and 135H Motor Graders Power Train
Gear Pump (Transmission Charging and Scavenge) - Assemble 120H and 135H Motor Graders Power Train
Gear Pump (Transmission Charging and Scavenge) - Install 120H and 135H Motor Graders Power Train
Gear Pump (Transmission Charging and Scavenge) - Remove 120H and 135H Motor Graders Power Train

Hydraulic Gear Pumps Used in Transmissions{3066, 5073} Hydraulic Gear Pumps Used in Transmissions{3066, 5073}
SCREEN GP

Magnetic Screen (Transmission) 120H and 135H Motor Graders Power Train
SEAL GP-DUO-CONE

Final Drive Duo-Cone Seal Assembly Information Update {7561} 2009/01/26
SHAFT GP

Drive Shaft 120H and 135H Motor Graders Power Train

Drive Shaft - Remove and Install 120H and 135H Motor Graders Power Train
TANDEM & COVER GP

Tandem and Cover 120H and 135H Motor Graders Power Train
Tandem and Cover 120H and 135H Motor Graders Power Train

Final Drive and Tandem Drive 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

Tandem and Cover - Remove and Install 120H and 135H Motor Graders Power Train

Correction to Disassembly and Assembly , "Tandem and Cover - Remove and Install" {4064} 2004/02/23
The Breather has been Relocated on the Tandem and Cover Group {4062, 4064} 2005/10/03
Welds Can Be Added In Order To Strengthen The Tandem Drive Housing Assemblies on Certain H Series Motor Graders {4062, 4064} 2012/02/08

Tandem Breather - Clean/Replace 120H and 135H Motor Graders
TOOLS

127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727} 127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
425-0720 Lifting Fixture Assembly{0599, 0629, 0632, 3063, 3155} 425-0720 Lifting Fixture Assembly{0599, 0629, 0632, 3063, 3155}
TORQUE CONVERTER GP

Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129} 2013/03/21

Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents{3030, 3101, 3133} Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents{3030, 3101, 3133}
Repair of Transmission, Torque Converter, and Torque Divider Shafts{3000, 3063, 3100} Repair of Transmission, Torque Converter, and Torque Divider Shafts{3000, 3063, 3100}
Thermal Spray Procedures for Torque Converter Turbine Wheel{0679, 3101, 3131} Thermal Spray Procedures for Torque Converter Turbine Wheel{0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller{0679, 3101, 3134} Thermal Spray Procedures for Torque Converter Impeller{0679, 3101, 3134}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts{0679, 0719, 3030, 3101, 3125, 3130} Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts{0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes{0599, 0679, 3001, 3030, 3101, 3160} Thermal Spray Procedures for Transmission and Torque Converter Yokes{0599, 0679, 3001, 3030, 3101, 3160}
TRANSMISSION GP

Transmission 120H and 135H Motor Graders Power Train
Transmission Case 120H and 135H Motor Graders Power Train

Transmission 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

Transmission Clutch Running Clearance - Check 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

Transmission - Disassemble 120H and 135H Motor Graders Power Train
Transmission - Assemble 120H and 135H Motor Graders Power Train
Transmission - Remove 120H and 135H Motor Graders Power Train
Transmission - Install 120H and 135H Motor Graders Power Train

A New Process for Checking Seal Ring Carrier to Clutch Shaft Clearance {3063, 3155, 3170} 2007/11/19

Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material{3030, 3155, 3190} Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material{3030, 3155, 3190}
Transmission Reuse and Salvage Manual Contents{0374, 3030} Transmission Reuse and Salvage Manual Contents{0374, 3030}
Reuse and Salvage of Transmission Components{3030} Reuse and Salvage of Transmission Components{3030}
Procedures to Salvage Thrust Faces on Planetary Carriers{3160, 4050, 4051, 4093} Procedures to Salvage Thrust Faces on Planetary Carriers{3160, 4050, 4051, 4093}
Thermal Spray Procedures for Clutch Piston Inside Diameter{0679, 3160, 3170} Thermal Spray Procedures for Clutch Piston Inside Diameter{0679, 3160, 3170}
VALVE GP-DIFFERENTIAL LOCK

Differential Lock Pressure - Check 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
VALVE GP-LOCKUP CLUTCH & SOL

The Color Codes on the Springs in the Selector and Pressure Control Valves Have Changed {3073, 3074, 3083, 3124} 2009/04/20
VALVE GP-SELECTOR
An Improved Body Is Now Used for the Selector and Pressure Control Valve on Certain H and K Series Motor Graders {3083} 2013/01/08
VALVE GP-SELECTOR & PRESS CONT

Engagement Pressure for the Transmission Clutch - Calibrate 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Fill Time for the Transmission Clutch - Calibrate 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

MID 081 - CID 1401 - FMI 03 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1401 - FMI 06 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1401 - FMI 05 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1401 - FMI 13 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1402 - FMI 03 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1402 - FMI 05 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1402 - FMI 06 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1402 - FMI 13 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1403 - FMI 03 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1403 - FMI 05 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1403 - FMI 06 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1403 - FMI 13 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 161-7055 VALVE BODY ON CERTAIN 12H, 120H, 135H, 140H, 143H, 160H, AND 163H MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 161-7055 VALVE BODY ON CERTAIN 12H, 120H, 135H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
VALVE GP-SOLENOID

MID 081 - CID 1404 - FMI 03 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1404 - FMI 05 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1404 - FMI 06 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1405 - FMI 03 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1405 - FMI 05 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1405 - FMI 06 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1406 - FMI 03 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1406 - FMI 05 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1406 - FMI 06 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1407 - FMI 03 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1407 - FMI 05 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1407 - FMI 06 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1408 - FMI 03 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1408 - FMI 05 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1408 - FMI 06 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
VALVE GP-TRANSMISSION CONTROL

Transmission Control Valve - Disassemble 120H and 135H Motor Graders Power Train
Transmission Control Valve - Assemble 120H and 135H Motor Graders Power Train
Transmission Control Valve - Remove 120H and 135H Motor Graders Power Train
Transmission Control Valve - Install 120H and 135H Motor Graders Power Train
WHEEL GP

Wheel Group 120H and 135H Motor Graders Power Train

Wheel and Tire (Rear) - Remove and Install 120H and 135H Motor Graders Power Train
Wheel and Tire (Front) - Remove and Install 120H and 135H Motor Graders Power Train

Recommended Limits to the Difference in Tire Diameters {4203} 2003/07/28

Tire Inflation Pressure Adjustment 120H and 135H Motor Graders
Tire Inflation with Nitrogen 120H and 135H Motor Graders
Tire Inflation - Check 120H and 135H Motor Graders
Tire Shipping Pressure 120H and 135H Motor Graders
DRIVE GP-FINAL

Final Drive 120H and 135H Motor Graders Power Train

Final Drive Bearings - Adjust 120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

Final Drive - Remove 120H and 135H Motor Graders Power Train
Final Drive - Disassemble 120H and 135H Motor Graders Power Train
Final Drive - Assemble 120H and 135H Motor Graders Power Train
Final Drive - Install 120H and 135H Motor Graders Power Train

A New Final Drive Housing Has Improved Service Life {4050} 2005/06/20
The Purpose of the Vent Hole on the Final Drive for Certain H, K, M, and M Series 2 Motor Graders {4050} 2013/04/17

Final Drive Preload - Check 120H and 135H Motor Graders
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMS

Ordering a Replacement Machine Identification Plate {7405, 7557} 2004/03/01
New ROPS Films, FOPS Films and TOPS Films Have Been Designed {7557} 2005/05/23
Process for Ordering a New Engine Emissions Label on Certain Motor Graders {7405, 7557} 2012/01/26

PRODUCT SUPPORT PROGRAM FOR REPAINTING CERTAIN 12H, 120H, 135H, AND 140H ON MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REPAINTING CERTAIN 12H, 120H, 135H, AND 140H ON MOTOR GRADERS

Updating the Certification Label for China{7557} Updating the Certification Label for China{7557}
GASKET & SEAL KITS

The Color of Certain O-Ring Seals Will Change {7555} 2002/12/09
The 1U-8846 Gasket Sealant Is Canceled {7555} 2010/03/22

The Color of Certain O-Ring Seals Is Changing {7555} 2002/12/01
The 1U-8846 Gasket Sealant Is Cancelled {7555} 2010/03/31

The Color of Certain O-Ring Seals Is Changing {7555} 2003/01/01
The 1U-8846 Gasket Sealant Is Cancelled {7555} 2010/03/22

Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555} Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
HARDWARE & SEALANTS

Chart for Heli-Coil Repair{0676} Chart for Heli-Coil Repair{0676}
LITERATURE GP

The Current Special Publication, PECP9067, "One Safe Source" Is Now Available Through The Internet {0374} 2002/05/13
Announcing the Combination of Groups Within the Paper Copies of the Caterpillar Parts Manuals {0374} 2002/06/03
The Contents Of The Service Manuals For All Caterpillar Machines Is Available On The Caterpillar Intranet {1000} 2002/12/02
"Tool and Shop Products Guide" by the Cat Service Technology Group (CSTG) Has Been Replaced by Two New Catalogs {0374} 2006/04/17

Caterpillar Service Welding Guide{0599, 0677, 0678, 0679} Caterpillar Service Welding Guide{0599, 0677, 0678, 0679}

Contents for Thermal Spray Reference Manual{0374, 0679} Contents for Thermal Spray Reference Manual{0374, 0679}
LUBRICANTS & FLUIDS

Managing Engine Oil Service Levels {1348} 2007/06/18
PARTS STOCK, ORDERING & RETURN

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE 6E-5153 COMPENSATOR SPRINGS THAT ARE IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE 6E-5153 COMPENSATOR SPRINGS THAT ARE IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING, IF NECESSARY, VARIOUS CHECK VALVE ASSEMBLIES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING, IF NECESSARY, VARIOUS CHECK VALVE ASSEMBLIES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 331-5291 AM/FM/WB/CD RADIO GP AND 331-5292 AM/FM RADIO GP FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 331-5291 AM/FM/WB/CD RADIO GP AND 331-5292 AM/FM RADIO GP FROM DEALER PARTS STOCK
REBUILD & SALVAGE

1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679} 1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679}

Fundamentals of Arc Spray for Reconditioning Components{0679} Fundamentals of Arc Spray for Reconditioning Components{0679}
TOOLS

Cat Service Tools Releases New Hose Cutting Machine {0678, 0684} 2004/03/29
New Pry Bars Have Striking Caps on Handles {0607} 2004/03/29
Twist Impact Sockets Grip Fasteners as Torque is Applied {0601} 2004/03/29
249-2813 Water Filter Gp is Available for Shop Applications that Require Water Filtration {0699} 2004/07/05
210-6990 Pressure Gauge (LCD Display, 0 to 500-PSI) Is Available for Use by Technicians {0770} 2004/07/01
Lockout Valves Shut Off Air Supply in the Service Shop {0699} 2005/04/25
Disposable Dessicant Filter is Now Available {0618, 0646} 2006/02/13
Slide Sledge Heavy Equipment Repair Tools Are Now Available {0599, 0644} 2006/04/17
Use Only Cleaning Agents that are Water Based with the 212-1503 Parts Washer Kit {0680} 2006/10/02
Increased Support for Repair Parts is Available for Products that are sold by Dealer Service Tools from Advanced Technology Services {0599} 2008/04/14
Component Cleaners That Contain Trichloroethylene (TCE) Must Not Be Used On Electrical Connectors {0709} 2010/02/22

138-7573, 138-7574, 138-7575, 138-7576, 241-3790, and 241-3792 Link Bracket Assemblies{0632, 7063, 7063} 138-7573, 138-7574, 138-7575, 138-7576, 241-3790, and 241-3792 Link Bracket Assemblies{0632, 7063, 7063}
Compact DPF Cleaner{0599, 0701, 0702, 108F} Compact DPF Cleaner{0599, 0701, 0702, 108F}
Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200} Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200}
415-4055 Ultrasonic Wear Indicator IV Group{0787, 7000} 415-4055 Ultrasonic Wear Indicator IV Group{0787, 7000}

Procedure for Adding Filtration Capability to Solvent Stands{0680} Procedure for Adding Filtration Capability to Solvent Stands{0680}
WARRANTY

Provide Proper Documentation of Returned Parts within the Warranty Claim {1000} 2004/03/22
PROTECTION GP
An Improved Corporate Padlock Is Available {7430} 2004/03/22
KIT-REBUILD

1U-8846 Gasket Sealant Has Been Removed From 3N-5904 Gear Seal Kit {1000, 7000} 1U-8846 Gasket Sealant Has Been Removed From 3N-5904 Gear Seal Kit {1000, 7000}
STEERING SYSTEM
ACCUMULATOR GP

A New Steering Accumulator has Improved Durability {4304, 4331} 2006/06/19
STEERING COLUMN GP

Procedure to Apply Dielectric Grease to the Horn (Cruise Control) Contact Ring{4310} Procedure to Apply Dielectric Grease to the Horn (Cruise Control) Contact Ring{4310}
CYLINDER GP

PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
ELECTRICAL SYSTEM
INSTALLATION GP

CAESultra Installation for Wheel Loaders, Wheel Dozers, Landfill Compactors, and Motor Graders{7604, 7620} CAESultra Installation for Wheel Loaders, Wheel Dozers, Landfill Compactors, and Motor Graders{7604, 7620}
RECEIVER GP

New Laser Receiver for AccuGrade System {7009} 2006/12/18

MS990C Part Number 291-1913 Receivers used on Computer Aided Earthmoving Systems (CAES), and AccuGrade<SUP>&reg;</SUP> Systems{7010} MS990C Part Number 291-1913 Receivers used on Computer Aided Earthmoving Systems (CAES), and AccuGrade® Systems{7010}
UNDERCARRIAGE
IDLER GP

Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159} 2004/08/16

Installation of Conventional Duo-Cone Seals{7561} Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561} Installation of Inverted Duo-Cone Seals{7561}

Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180} Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
TRACK GP
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787} 168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
WORK TOOLS
BLADE GP

Blade Lift 120H and 135H Motor Graders Hydraulic and Steering System

Blade - Remove 120H and 135H Motor Graders Machine Systems
Blade - Install 120H and 135H Motor Graders Machine Systems
Blade Lift Arm - Remove 120H and 135H Motor Graders Machine Systems
Blade Lift Arm - Install 120H and 135H Motor Graders Machine Systems

Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804} 2011/12/26

Moldboard Wear Strip - Inspect/Adjust/Replace 120H and 135H Motor Graders
Moldboard Blade 120H and 135H Motor Graders

Procedure to Mount the Blade Extension to the Moldboard Blade{6173} Procedure to Mount the Blade Extension to the Moldboard Blade{6173}

Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151} Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151}
BUCKET GP

Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800} Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
GROUND ENGAGING TOOLS (G.E.T.)

New Cutting Edges Are Now Used {6801, 6804} 2003/10/27

Scarifier Teeth - Inspect/Replace 120H and 135H Motor Graders
Cutting Edges and End Bits - Inspect/Replace 120H and 135H Motor Graders

398-6784 Recommended J Series Two Strap Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805} 398-6784 Recommended J Series Two Strap Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805} 398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805} 256-2928 Recommended K Series Two Strap Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805} 256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}

Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800} Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}

Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800} Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
RIPPER GP

Ripper - Remove 120H and 135H Motor Graders Machine Systems
Ripper - Install 120H and 135H Motor Graders Machine Systems

Use the Proper Ripper Mounting Groups to Install the Ripper {6324} 2008/10/20
SCARIFIER GP

Scarifier 120H and 135H Motor Graders Hydraulic and Steering System
Scarifier 120H and 135H Motor Graders Hydraulic and Steering System

Scarifier Digging Angle 120H and 135H Motor Graders
Scarifier Lift Link Socket - Lubricate 120H and 135H Motor Graders







You can buy parts on Amazon: .


23-05-2018
7T9147 Bearing Fits Caterpillar 8A 8 D8N D8R D8R II D8T 57H

7T9147  
$129.18
23-05-2018
Caterpillar YOKE A (3T8904)

3T8904  
 
$68.31
23-05-2018
Caterpillar 123-2367 1232367 ENGINE AIR FILTER Advanced High Efficiency

1232367