AVSPARE.COM
parts catalog

INSTALLATION & PARTS MANUAL WINCH MODEL PA55 FOR D4H & D5H P 1DD00001-UP (MACHINE) FRAME AND BODY Caterpillar SIS



TRACK-TYPE TRACTOR
D5H TRACK-TYPE TRACTOR 1DD
INSTALLATION & PARTS MANUAL WINCH MODEL PA55 FOR D4H & D5H P 1DD00001-UP (MACHINE) SEBP2369 D5H 1DD   (1986)

Parts group D5H:

  For full view, you need register

Information:

(For parts list, see above)

FRAME AND BODY
BAR & SUSPENSION GP

Improved Floating Lubricated Center Pin Used In Equalizer Bar Group{7207, 7206} Improved Floating Lubricated Center Pin Used In Equalizer Bar Group{7207, 7206}

Equalizer Bar D5H AND D5H SERIES II TRACTORS POWER TRAIN
BOX GP-BATTERY

Battery Ratings And Cross Reference Chart{1401} Battery Ratings And Cross Reference Chart{1401}

Maintenance Free Batteries{1401} 1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500} 1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401} 1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401} 1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401} 1987/03/23
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406} 1987/05/04
Testing The Starter On The Engine{1401,1450} 1987/05/04
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400} 1988/12/12
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467} 1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453} 1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401} 1979/11/26
High Performance Maintenance Free Battery Available{1401} 1989/01/16
Limitations On Engine Cranking Time{1453,1401} 1989/03/27
Preventive Maintenance For Batteries{1401} 1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467} 1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411} 1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411} 1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411} 1989/05/01
Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401} 1989/06/19
CASE & FRAME GP

Product Support Program For Replacing The Case And Frame Assembly On Certain D5H and D5H LGP Tractors Product Support Program For Replacing The Case And Frame Assembly On Certain D5H and D5H LGP Tractors
Product Support Program For Replacing The Case And Frame Assembly On Certain D5H And D5H LGP Tractors Product Support Program For Replacing The Case And Frame Assembly On Certain D5H And D5H LGP Tractors

Product Support Program For Replacing The Case And Frame Assembly On Certain D5H and D5H LGP Tractors Product Support Program For Replacing The Case And Frame Assembly On Certain D5H and D5H LGP Tractors
Service Letter Extension Service Letter Extension

Product Support Program For Replacing The Case And Frame Assembly On Certain D5H and D5H LGP Tractors Product Support Program For Replacing The Case And Frame Assembly On Certain D5H and D5H LGP Tractors
Service Letter Extension Service Letter Extension

Product Support Program For Replacing The Case And Frame Assembly On Certain D5H and D5H LGP Tractors Product Support Program For Replacing The Case And Frame Assembly On Certain D5H and D5H LGP Tractors

Service Letter Extension Service Letter Extension

Product Support Program For Replacing The Case And Frame Assembly On Certain D5H and D5H LGP Tractors Product Support Program For Replacing The Case And Frame Assembly On Certain D5H and D5H LGP Tractors
Service Letter Extension Service Letter Extension

Product Support Program For Replacing The Case And Frame Assembly On Certain D5H and D5H LGP Tractors Product Support Program For Replacing The Case And Frame Assembly On Certain D5H and D5H LGP Tractors
Service Letter Extension Service Letter Extension

Special Instruction Available To Route Lift Cylinder Lines Externally Instead Of Through Main Case And Frame {5057} 1988/08/29
Machining Dimensions Provided For Pin Bores In Equalizer Bars, Main Frames, And Roller Frames{4151,7051,7206} 1989/09/18
CHASSIS GP
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000} 1987/02/16
DOOR GP
Improved Hood Groups, Engine Enclosure Groups And Side Panel Group Provide Easier Engine Access{7251,7263} 1988/08/08
New Hood Made Of Thicker Material And Engine Enclosure Doors Have Horizontal Mounted Latching Pins To Prevent Stress On The Hood{7251,7263} 1994/04/04
Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308} Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}
DRAWBAR GP

Drawbar Group D5H AND D5H SERIES II TRACTORS POWER TRAIN
Swinging Drawbar Group D5H AND D5H SERIES II TRACTORS POWER TRAIN

New Step Assembly For Drawbar Is More Durable And Is Available For Parts Service{7105} 1988/08/08
ENCLOSURE GP

Pin Latch Of Engine Door Could Interfere With Air Filter Cup Pin Latch Of Engine Door Could Interfere With Air Filter Cup

New Headliner Accompanies Improved O-ROPS Design{7323} 1992/04/20
New Hood Made Of Thicker Material And Engine Enclosure Doors Have Horizontal Mounted Latching Pins To Prevent Stress On The Hood{7251,7263} 1994/04/04
FENDER GP

Installation of Fender Supports{7252} Installation of Fender Supports{7252}
FRAME GP
Dimensions for Equalizer Bar, Center Pins, End Pins and Pivot Pins{4151, 4153, 7050, 7206} Dimensions for Equalizer Bar, Center Pins, End Pins and Pivot Pins{4151, 4153, 7050, 7206}
Installation of 7X7700 Fuel Cap{1273} Installation of 7X7700 Fuel Cap{1273}
Repair of D5H Rear Track Roller Frames{4151} Repair of D5H Rear Track Roller Frames{4151}

Orbiting Check Orbiting Check

Track Roller Frame D5H AND D5H SERIES II TRACTORS POWER TRAIN
Track Roller Frame SUPPLEMENT FOR D4H SERIES II, D4H SERIES III, AND D5H SERIES
Front Frame<BR> D4H (7PK1-UP); D5H (7EG1000-UP) SUPPLEMENT FOR D4H SERIES II, D4H SERIES III, AND D5H SERIES

Front Track Roller Frames D5H AND D5H SERIES II TRACTORS POWER TRAIN
Track Roller Frames D5H AND D5H SERIES II TRACTORS POWER TRAIN

Special Instruction Available To Route Lift Cylinder Lines Externally Instead Of Through Main Case And Frame {5057} 1988/08/29
Check Guides Between Front And Rear Roller Frames For Wear Every 2000 Hours Or 12 Months{4151} 1989/06/05
Machining Dimensions Provided For Pin Bores In Equalizer Bars, Main Frames, And Roller Frames{4151,7051,7206} 1989/09/18
New, Stronger Rear Track Roller Frames Are Used; Procedure For Repairing And Reinforcing Fatigue Cracks In Earlier D5H Standard And LGP Gauge Rear Track Roller Frames Available{4151} 1991/01/14
GUARD GP

Modification to Guiding Guards for Installation of Heavy Duty Track On D5H{4177, 4178} Modification to Guiding Guards for Installation of Heavy Duty Track On D5H{4177, 4178}

Possible Pin Boss Scrubbing On Machines With Heavy Duty Or Rotating Bushing Track Groups Possible Pin Boss Scrubbing On Machines With Heavy Duty Or Rotating Bushing Track Groups

NEHS1211: 463-3380 Jack Group Belly Guard Lift {0374, 0599, 0629, 0632, 0700, 7150, 7151, 7153} NEHS1211: 463-3380 Jack Group Belly Guard Lift {0374, 0599, 0629, 0632, 0700, 7150, 7151, 7153}

Vandalism Guard Now Has Plated Hardware{7315} 1986/10/13
Undercarriage for D4H and D5H Custom Skidders{4170,4155,4159,4169,4172,4175,4177,4180} 1989/11/27
Shim Reduces Torsional Stress In Fuel Tank{1273} 1990/06/04
Track Guide Wear Strips Available For Parts Service{4178} 1991/02/11
Improved Brush Protective Screen Group Used On Open ROPS {7158,7165} 1991/04/01
Smaller Diameter O-Ring Seal Used On Head For Threaded Gland Cylinder Groups {4303,5101,5102,5104,5452,7562} 1996/08/12
HOOD GP
Improved Hood Groups, Engine Enclosure Groups And Side Panel Group Provide Easier Engine Access{7251,7263} 1988/08/08
New Hood Made Of Thicker Material And Engine Enclosure Doors Have Horizontal Mounted Latching Pins To Prevent Stress On The Hood{7251,7263} 1994/04/04
MISCELLANEOUS INFORMATION

Procedure For Installing Carrier Rollers{4154, 4162} Procedure For Installing Carrier Rollers{4154, 4162}
Dimensions for Equalizer Bar, Center Pins, End Pins and Pivot Pins{4151, 4153, 7050, 7206} Dimensions for Equalizer Bar, Center Pins, End Pins and Pivot Pins{4151, 4153, 7050, 7206}
Installation of Fender Supports{7252} Installation of Fender Supports{7252}
Repair of D5H Rear Track Roller Frames{4151} Repair of D5H Rear Track Roller Frames{4151}

Service Letter Extension Service Letter Extension


Possible Pin Boss Scrubbing On Machines With Heavy Duty Or Rotating Bushing Track Groups Possible Pin Boss Scrubbing On Machines With Heavy Duty Or Rotating Bushing Track Groups

Service Letter Extension Service Letter Extension



Vandalism Guard Now Has Plated Hardware{7315} 1986/10/13
Adjustments To Front Idler Position Can Change Tractor Ride and Bulldozer Performance{4159} 1987/03/16
Way To Improve Finish Grade Performance And Ride{4157,4159,5050} 1987/05/25
New 1U5753 Seal Starter Available To Aid Installation Of Large Shear Seals {0729,4151} 1987/07/20
Improved Hood Groups, Engine Enclosure Groups And Side Panel Group Provide Easier Engine Access{7251,7263} 1988/08/08
Check Guides Between Front And Rear Roller Frames For Wear Every 2000 Hours Or 12 Months{4151} 1989/06/05
Machining Dimensions Provided For Pin Bores In Equalizer Bars, Main Frames, And Roller Frames{4151,7051,7206} 1989/09/18
Improved Undercarriage Has Increased Wear Life{4155,4154,4175} 1989/09/18
Higher Strength Track Pin Used{4175} 1990/04/23
Improved Seals Used; Seal Replacement In Folded Core Radiators{1353} 1990/06/04
New Telescoping Recoil Seal Assemblies Used{4151,4157} 1990/10/29
New, Stronger Rear Track Roller Frames Are Used; Procedure For Repairing And Reinforcing Fatigue Cracks In Earlier D5H Standard And LGP Gauge Rear Track Roller Frames Available{4151} 1991/01/14
Quad and Tri Link Track Undercarriage Management{4171} 1992/02/03
New Headliner Accompanies Improved O-ROPS Design{7323} 1992/04/20
Change To Thread Depth In Front Track Roller Frame Makes It Necessary To Modify Or Replace 8G-4960 Retainer{4141,4158} 1994/11/14
PUMP GP-LUBRICATION

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073} Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
SEAL GP

Assembly and Installation of Inverted Duo-Cone Seals{7561} Assembly and Installation of Inverted Duo-Cone Seals{7561}
STRUCTURAL GP

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412} 1986/06/02
TOOLS

NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200} NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1211: 463-3380 Jack Group Belly Guard Lift {0374, 0599, 0629, 0632, 0700, 7150, 7151, 7153} NEHS1211: 463-3380 Jack Group Belly Guard Lift {0374, 0599, 0629, 0632, 0700, 7150, 7151, 7153}
NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000} NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}

New 1U5753 Seal Starter Available To Aid Installation Of Large Shear Seals {0729,4151} 1987/07/20
SUSPENSION GP

Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200} Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200} NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}

Truck sale:

 
CATERPILLAR D5H 1986
- TRACK TYPE TRACTORS
FABICK CAT
 
 
CATERPILLAR D5H 1990
- TRACK TYPE TRACTORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
 
CATERPILLAR D5H 1989
- TRACK TYPE TRACTORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
Call 
1991 CAT D5H

Chin Xing Agro Machinery PLT
Alor Star, KEDAH, Malaysia 06250
USD $39,500 
1992 CAT D5H

SOUTHWEST TRACTOR & PARTS
Atoka, Oklahoma

You can buy parts: .

BTS-1334995 for CATERPILLAR C7/3126B Cylinder Head Gasket Junta de Cabeza
$29.22

26 Jun 2019
BTS-1334995 for CATERPILLAR C7/3126B Cylinder Head Gasket Junta de Cabeza

1334995  
Friday Part Filler Cap 142-8828 1428828 & Padlock 246-2641 246-2641 for Caterpillar Cat IT14G IT28G 247 247B 267 267B 287 216 216B 226B 228 236 236B 242B 248 268B TH220B TH340B TH350B 914G 924G 928G
$32.00

25 Jun 2019
Friday Part Filler Cap 142-8828 1428828 & Padlock 246-2641 246-2641 for Caterpillar Cat IT14G IT28G 247 247B 267 267B 287 216 216B 226B 228 236 236B 242B 248 268B TH220B TH340B TH350B 914G 924G 928G

1428828  
2462641  
1W5829 Nozzle AS-Fuel Valve 9N3979 0R2503 for Caterpillar
$69.99

25 Jun 2019
200 Hundredths Pounds
1W5829 Nozzle AS-Fuel Valve 9N3979 0R2503 for Caterpillar

1W5829  
9N3979  
0R2503  
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. CatĀ® and CaterpillarĀ® are registered trademarks of Caterpillar, Inc.