NO. 14E MOTOR GRADER / DIRECT DRIVE / 12K00001-02198 (MACHINE) FUEL SYSTEM Caterpillar SIS


OK request send
MOTOR GRADER
14E MOTOR GRADER 12K
NO. 14E MOTOR GRADER / DIRECT DRIVE / 12K00001-02198 (MACHINE) UE070102

Parts group 14E:

For full view, you need register
FUEL SYSTEM
CONTROL GP-GOVERNOR
None-None GOVERNOR CONTROL GOVERNOR CONTROL--Part 1 of 2
Serial No. 12K1 to 12K551 inclusive

None-None GOVERNOR CONTROL GOVERNOR CONTROL--Part 2 of 2
Serial No. 12K1 to 12K551 inclusive
Refer also to Page 130C for special parts

6D-3700 GOVERNOR CONTROL GOVERNOR CONTROL (6D3700 N/S)--Part 1 of 2
Serial No. 12K552 to 12K1236 inclusive

6D-3700 GOVERNOR CONTROL GOVERNOR CONTROL (6D3700 N/S)--Part 2 of 2
Serial No. 12K552 to 12K1236 inclusive

6D-3700 GOVERNOR CONTROL GOVERNOR CONTROL (6D3700 N/S)--Part 1 of 2
Effective with Serial No. 12K1237

6D-3700 GOVERNOR CONTROL GOVERNOR CONTROL (6D3700 N/S)--Part 2 of 2
Effective with Serial No. 12K1237

7D-1020 ACCELERATOR-DECELERATOR BEARING GROUP 7D1020 ACCELERATOR-DECELERATOR BEARING GROUP
Serial No. 12K1 to 12K551 inclusive. Provides Field Replacement
for 4D9554 Bracket Assembly shown on Page 32A

9S-5002 GOVERNOR CONTROL LEVER SERVICE GROUP 9S5002 GOVERNOR CONTROL LEVER SERVICE GROUP
Provides Field Replacement for 3S9640 Lever Assembly
shown on Pages 34 and 34A

FILTER GP-FUEL
5S-9666 FUEL FILTER GROUP 5S9666 FUEL FILTER GROUP
GOVERNOR GP
7S-6740 FUEL PUMP HOUSING AND GOVERNOR FUEL PUMP HOUSING AND GOVERNOR (7S6740 N/S)
7S9333 Governor and 5S9076 Fuel Pump Housing parts are
shown on Pages 34, 34A, 34A-1, 34A-2, 38 and 38A

LINES GP-FUEL
None-None FUEL LINES FUEL LINES
Serial No. 12K1 to 12K847 inclusive

7D-1050 FUEL LINES FUEL LINES (7D1050 N/S)
Serial No. 12K848 to 12K855 inclusive

7D-1050 FUEL LINES FUEL LINES (7D1050 N/S)
Effective with Serial No. 12K856

LINES GP-FUEL INJECTION
5S-7248 FUEL INJECTION VALVES AND LINES FUEL INJECTION VALVES AND LINES (5S7248 N/S)
Serial No. 12K1 to 12K1793 inclusive

5S-7248 FUEL INJECTION VALVES AND LINES FUEL INJECTION VALVES AND LINES (5S7248 N/S)
Serial No. 12K1974-Up

PUMP GP-FUEL INJECTION
5S-9076 FUEL PUMP HOUSING GROUP 5S9076 FUEL PUMP HOUSING GROUP--Type 1
Part of Fuel Pump Housing and Governor shown on Page 31

5S-9076 FUEL PUMP HOUSING GROUP 5S9076 FUEL PUMP HOUSING GROUP--Type 2
Part of Fuel Pump Housing and Governor shown on Page 31

PUMP GP-FUEL PRIMING
7S-1251 FUEL PRIMING PUMP GROUP 7S1251 FUEL PRIMING PUMP GROUP
9H2256 Pump parts are shown on Page 36A

9H-2256 FUEL PRIMING PUMP GROUP 9H2256 FUEL PRIMING PUMP GROUP
Part of 7S1251 Fuel Priming Pump Group shown on Page 36

PUMP GP-FUEL TRANSFER
7S-4430 FUEL TRANSFER PUMP GROUP 7S4430 FUEL TRANSFER PUMP GROUP
TANK GP-FUEL
None-None FUEL TANK FUEL TANK--75 U.S. Gallons
Serial No. 12K1 to 12K404 inclusive
Refer also to Pages 132 and 142A for special parts

None-None FUEL TANK FUEL TANK--75 U.S. Gallons
Serial No. 12K405 to 12K847 inclusive
Refer also to Pages 132 and 142B for special parts

None-None FUEL TANK FUEL TANK--75 U.S. Gallons
Effective with Serial No. 12K848
Refer also to Pages 132 and 143 for special parts

5D-1920 PROTECTION COVER GROUP 5D1920 PROTECTION COVER GROUP--Fuel Tank Cap
Also part of 8D1410, 8D3000 & 9D490 Protection
Arrangements listed on Pages 130A & 130D

6D-7240 FUEL TANK GROUP 6D7240 FUEL TANK GROUP--75 U.S. Gallon--Rapid Filling
Serial No. 12K1 to 12K404 inclusive

6D-9990 FUEL TANK GROUP 6D9990 FUEL TANK GROUP--73 U.S. Gallon--Rapid Filling
Serial No. 12K405 to 12K847 inclusive

7D-0390 FUEL TANK 7D390 FUEL TANK--75 U.S. Gallon--Rapid Filling
Effective with Serial No. 12K848
Only separate parts serviced. When complete Group is required, order 7D7420

7D-7420 FUEL TANK GROUP 7D7420 FUEL TANK GROUP--75 U.S. Gallon--Rapid Filling
Effective with Serial No. 12K848

7D-7430 FUEL TANK GROUP 7D7430 FUEL TANK GROUP--75 U.S. Gallon--Rapid Filling--Type 1
Serial No. 12K848-Up

7D-7430 FUEL TANK GROUP 7D7430 FUEL TANK GROUP--75 U.S. Gallon--Rapid Filling--Type 2
Serial No. 12K848-Up
9D630 Cover parts are shown on Page 143E

7D-7430 FUEL TANK GROUP 7D7430 FUEL TANK GROUP--75 U.S. Gallon--Rapid Filling--Type 3
Serial No. 12K848-Up
9D630 Cover parts are shown on Page 143E

9D-0630 COVER-DUST 9D630 DUST COVER GROUP
Part of 7D7430 Fuel Tank Group shown on Page 143C

TORQUE CONTROL GP
8S-5050 GOVERNOR TORQUE SPRING GOVERNOR TORQUE SPRING (8S5050 N/S)
Serial No. 12K1 to 12K783, 12K785 to 12K787 and 12K789
to 12K791 inclusive

8S-5050 GOVERNOR TORQUE SPRING GOVERNOR TORQUE SPRING (8S5050 N/S)
Serial No. 12K784, 12K788, 12K792 to 12K1686,
12K1692 & 12K1693 inclusive

8S-5050 GOVERNOR TORQUE SPRING GOVERNOR TORQUE SPRING (8S5050 N/S)
Serial No. 12K1687 to 12K1691 and 12K1694-Up



Information:

(For parts list, see above)

FUEL SYSTEM
ACTUATOR GP-RACK LIMITER

Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264} 1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264} 1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264} 1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264} 1986/11/03
CONTROL GP-DECELERATOR

Governor And Decelerator Control<BR> (Sleeve Metering Fuel System - PC) 3306 VEHICULAR ENGINE
Governor And Decelerator Control (9S7053 For D7 Tractor; Power Shift)<BR> (Scroll Fuel System - PC) 3306 VEHICULAR ENGINE
CONTROL GP-FUEL
Fuel Ratio Control<BR> (Sleeve Metering Fuel System - PC) 3306 VEHICULAR ENGINE
Fuel Ratio Control<BR> (Sleeve Metering Fuel System - DI) 3306 VEHICULAR ENGINE
Fuel Ratio Control (4N5063, 8S8951)<BR> (Scroll Fuel System - PC) 3306 VEHICULAR ENGINE

6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652} 1981/03/23
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250} 1977/09/26
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278} 1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278} 1992/06/15
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287} 1996/01/22
CONTROL GP-FUEL RATIO

Tamper Resistant PLugs and Bolts Used to Prevent Changes to Air Fuel Ratio Control (FRC) Settings Tamper Resistant PLugs and Bolts Used to Prevent Changes to Air Fuel Ratio Control (FRC) Settings
CONTROL GP-GOVERNOR

Governor Control<BR> (Sleeve Metering Fuel System - PC) 3306 VEHICULAR ENGINE
Governor Control<BR> (Sleeve Metering Fuel System - DI) 3306 VEHICULAR ENGINE
Engine Decelerator Control (1P45 For 980 Wheel Loader)<BR> (Scroll Fuel System-PC) 3306 VEHICULAR ENGINE

Governor Control Cover Assembly Includes New Seal And Improved Cover {1264} 1997/07/07
CONTROL GP-TIMING

Visual Inspection of Timing Advance Used in New Scroll Fuel Systems (NSFS) of 3300 and 3400 Engines Visual Inspection of Timing Advance Used in New Scroll Fuel Systems (NSFS) of 3300 and 3400 Engines
DRIVE GP-TACHOMETER

Tachometer Drive 3306 VEHICULAR ENGINE
Tachometer Drive 3306 VEHICULAR ENGINE
FILTER GP-FUEL
Water Separator<BR> (Sleeve Metering Fuel System - PC &amp; DI) 3306 VEHICULAR ENGINE

Fuel Filter Base With Check Valve Prevents High Fuel Pressure After The Engine Is Stopped{1262} 1979/03/05
New Larger Capacity Water Separator Is Available{1250} 1979/03/12
Method To Prevent High Fuel Pressure In The Injection Pump Housing{1262} 1979/06/18
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251} 1994/07/11
New Fuel Priming Pump And Improved Gasket Used{1258} 1994/08/22
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261} 1999/04/12
New Primary Fuel Filters are Available {1260, 1261} 2008/07/14

Installation of Fuel/Water Separator{1260, 1263} Installation of Fuel/Water Separator{1260, 1263}

295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280} 295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
FUEL AR-HEAVY DISTILLATE

Diesel Fuel Recommendation Expanded{1280} 1977/02/14
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280} 1979/02/05

Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280} Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
FUEL SYSTEM GP

Modification Of Puller Bolt Prevents Thread Damage During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253} 1980/11/03
Use Two Wrenches On Fuel Line Nuts{1254,1252} 1981/04/13
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252} 1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775} 1988/05/23
New Guideline For Product Information, SEBF8340, &quot; Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)&quot; Available {0374,1250} 1998/06/22

370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280} 284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280} 284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713} Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706} 169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
GOVERNOR GP

Injection Nozzle (7N449)<BR> (Sleeve Metering Fuel System - DI) 3306 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - PC) 3306 VEHICULAR ENGINE

New Fuel Injection Nozzle Assembly Used{1254} 1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264} 1981/02/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626} 1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253} 1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286} 1981/09/14
New Torque Specification For Bushing{0374,1253,1251} 1982/01/18
Modification Of 2P8315 Bracket Assembly{0652,1286} 1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264} 1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264} 1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254} 1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281} 1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287} 1985/11/18
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253} 1986/03/10
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281} 1986/06/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254} 1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251} 1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620} 1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257} 1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622} 1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251} 1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286} 1979/08/13
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281} 1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264} 1991/12/02
Governor Spring Guide Press Depth{1287,1284} 1996/01/22

Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250} Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Wiring Polarity on Woodward 2301 Governors{1289} Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253} Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264} Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251} Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}

3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life 3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
LINES GP-FUEL

6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254} 1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254} 1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651} 1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254} 1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254} 1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254} 1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652} 1982/11/22
New Bleed Screw Used In Fuel Injection Nozzle{1254} 1985/09/23
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254} 1986/04/07
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336} 1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254} 1977/10/31
New Drive Adapters For Fuel Injection Test Bench{0650} 1978/09/11
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250} 1979/07/02
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254} 1992/04/20

Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254} Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782} 7000 Series Nozzles{0782}
LINES GP-FUEL INJECTION

Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254} 2008/12/01

PRODUCT LINE ADDITION: REMANUFACTURED FUEL INJECTORS FOR VARIOUS INDUSTRIAL, MACHINE, AND MARINE ENGINE APPLICATIONS PRODUCT LINE ADDITION: REMANUFACTURED FUEL INJECTORS FOR VARIOUS INDUSTRIAL, MACHINE, AND MARINE ENGINE APPLICATIONS
METER GP-SERVICE

Self-Powered Hour Meters Available{7480,7450} 1987/02/16
MISCELLANEOUS INFORMATION
New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622} 1982/02/08
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557} 1985/10/28
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782} 1986/06/16
Improved Fuel Priming Pump Used{1258} 1987/04/20
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250} 1978/02/06
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652} 1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374} 1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782} 1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782} 1988/04/18
Lubricity Limit Added To Preferred Distillate Fuel Recommendation {1280,7568} 1997/08/18

Use Of 3P2200 Calibration Tool Group{0650, 1250} Use Of 3P2200 Calibration Tool Group{0650, 1250}
Installation Of 8N3569 (24V) Or 9N5458 (12V) Fuel Boost Pump Group{1250} Installation Of 8N3569 (24V) Or 9N5458 (12V) Fuel Boost Pump Group{1250}
PUMP GP-FUEL INJECTION

Fuel System Timing 3306 VEHICULAR ENGINE
Fuel Injection Equipment<BR> (Sleeve Metering Fuel System - PC) 3306 VEHICULAR ENGINE
Fuel Injection Equipment<BR> (Sleeve Metering Fuel System - DI) 3306 VEHICULAR ENGINE
Fuel Injection Equipment<BR> (Scroll Fuel System - PC) 3306 VEHICULAR ENGINE

New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652} 1977/01/17

Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286} Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
PUMP GP-FUEL PRIMING

Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258} 2004/03/29
An Improved Hand Operated Fuel Priming Pump Is Available {1258} 2012/10/04

An Improved Hand Operated Fuel Priming Pump Is Available {1258} 2012/10/08

An Improved Hand Operated Fuel Priming Pump Is Available {1258} 2012/10/08

Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258} Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
PUMP GP-FUEL TRANSFER

Fuel Transfer Pump<BR> (Sleeve Metering Fuel System - PC) 3306 VEHICULAR ENGINE
Fuel Transfer Pump<BR> (Sleeve Metering Fuel System - DI) 3306 VEHICULAR ENGINE
Fuel Transfer Pump (4N4864)<BR> (Scroll Fuel System - PC) 3306 VEHICULAR ENGINE
TANK GP-FUEL

Updated Fuel Tank Caps Are Now Available {1273} 2004/03/15
Updated Fuel Tank Caps Are Now Available {1273} 2013/03/22
Conversion Kits are Available to Convert Caterpillar or Wiggins Fast Fuel System Threaded Receivers to Caterpillar Flange Mounted Receivers {1710} 2004/03/29
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000} 2005/12/19
TOOLS
6V3071 Seal Guide Keeps Seal In Position During Installation Of Transfer Pump {0620,1256} 1980/09/22
Correct Use Of The 6V4141 Sleeve Metering Calibration Tool Group{0600,0766,0778} 1984/10/01
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254} 1977/10/17
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254} 1978/03/27
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650} 1978/08/28
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651} 1978/10/09
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651} 1979/06/25
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325} 1979/10/08

Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782} Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Using The 5P-4150 Nozzle Testing Group{0782} Using The 5P-4150 Nozzle Testing Group{0782}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250} Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Using The 6V4950 Injection Line Speed Pickup Group{0782} Using The 6V4950 Injection Line Speed Pickup Group{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782} Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Using 8S2305, 9S228, And 6V9128 Rack Position Tool Groups{0782, 1250} Using 8S2305, 9S228, And 6V9128 Rack Position Tool Groups{0782, 1250}
Using The 8T1000 Position Indicator Group{0760, 0762} Using The 8T1000 Position Indicator Group{0760, 0762}
Use Of 6V4141 Sleeve Metering Calibration Tool Group{0778, 0782} Use Of 6V4141 Sleeve Metering Calibration Tool Group{0778, 0782}

9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706} 9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280} Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
Truck sale:
 
CATERPILLAR 14E 1973 - MOTOR GRADERS EMPIRE MACHINERY CO
1725 South Country Club Drive - Mesa -
 
 
CATERPILLAR 14E 1973 - MOTOR GRADERS EMPIRE MACHINERY CO
1725 South Country Club Drive - Mesa -
 
CAT 14E THE AUCTION CO
Colton, California
USD $22,500 
1973 CAT 14E TNT Truck & Machinery Sales
Fremont, Nebraska
USD $8,375 
CAT 14E Haney Equipment
Mulkeytown, Illinois


You can buy parts on Amazon: .

$18.85
22-09-2018
Caterpillar Hose A 0308172 New

0308172  
$12.53
22-09-2018
Caterpillar LINE AS #1 4N3281 New

4N3281  
$8.75
22-09-2018
Caterpillar Bolt-Socket HEA 7Y5216 New

7Y5216