NO. 14E MOTOR GRADER 12K02199-UP (MACHINE) FUEL SYSTEM Caterpillar SIS


OK request send
MOTOR GRADER
14E MOTOR GRADER 12K
NO. 14E MOTOR GRADER 12K02199-UP (MACHINE) UEG0702S

Parts group 14E:

For full view, you need register
FUEL SYSTEM
CONTROL GP-GOVERNOR
6D-3700 GOVERNOR CONTROL GOVERNOR CONTROL (6D3700 N/S)--Part 1 of 2
6D-3700 GOVERNOR CONTROL GOVERNOR CONTROL (6D3700 N/S)--Part 2 of 2
LINES GP-FUEL
7D-1050 FUEL LINES FUEL LINES (7D1050 N/S)
TANK GP-FUEL
5D-1920 PROTECTION COVER GROUP 5D1920 PROTECTION COVER GROUP--Fuel Tank Cap
Part of 9D2280 Vandalism Protection Arrangement listed on Page 262

7D-0380 FUEL TANK GROUP 7D380 FUEL TANK GROUP--75 U.S. Gallons
7D-7420 FUEL TANK GROUP 7D7420 FUEL TANK GROUP--75 U.S. Gallon--Rapid Fill
AN ATTACHMENT

7D-7430 FUEL TANK GROUP 7D7430 FUEL TANK GROUP--75 U.S. Gallon--Rapid Fill
AN ATTACHMENT



Information:

(For parts list, see above)

FUEL SYSTEM
ACTUATOR GP-RACK LIMITER

Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264} 1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264} 1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264} 1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264} 1986/11/03
CONTROL GP-DECELERATOR

Governor And Decelerator Control<BR> (Sleeve Metering Fuel System - PC) 3306 VEHICULAR ENGINE
Governor And Decelerator Control (9S7053 For D7 Tractor; Power Shift)<BR> (Scroll Fuel System - PC) 3306 VEHICULAR ENGINE
CONTROL GP-FUEL
Fuel Ratio Control<BR> (Sleeve Metering Fuel System - PC) 3306 VEHICULAR ENGINE
Fuel Ratio Control<BR> (Sleeve Metering Fuel System - DI) 3306 VEHICULAR ENGINE
Fuel Ratio Control (4N5063, 8S8951)<BR> (Scroll Fuel System - PC) 3306 VEHICULAR ENGINE

6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652} 1981/03/23
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250} 1977/09/26
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278} 1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278} 1992/06/15
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287} 1996/01/22
CONTROL GP-FUEL RATIO

Tamper Resistant PLugs and Bolts Used to Prevent Changes to Air Fuel Ratio Control (FRC) Settings Tamper Resistant PLugs and Bolts Used to Prevent Changes to Air Fuel Ratio Control (FRC) Settings
CONTROL GP-GOVERNOR

Governor Control<BR> (Sleeve Metering Fuel System - PC) 3306 VEHICULAR ENGINE
Governor Control<BR> (Sleeve Metering Fuel System - DI) 3306 VEHICULAR ENGINE
Engine Decelerator Control (1P45 For 980 Wheel Loader)<BR> (Scroll Fuel System-PC) 3306 VEHICULAR ENGINE

Governor Control Cover Assembly Includes New Seal And Improved Cover {1264} 1997/07/07
CONTROL GP-TIMING

Visual Inspection of Timing Advance Used in New Scroll Fuel Systems (NSFS) of 3300 and 3400 Engines Visual Inspection of Timing Advance Used in New Scroll Fuel Systems (NSFS) of 3300 and 3400 Engines
DRIVE GP-TACHOMETER

Tachometer Drive 3306 VEHICULAR ENGINE
Tachometer Drive 3306 VEHICULAR ENGINE
FILTER GP-FUEL
Water Separator<BR> (Sleeve Metering Fuel System - PC &amp; DI) 3306 VEHICULAR ENGINE

Fuel Filter Base With Check Valve Prevents High Fuel Pressure After The Engine Is Stopped{1262} 1979/03/05
New Larger Capacity Water Separator Is Available{1250} 1979/03/12
Method To Prevent High Fuel Pressure In The Injection Pump Housing{1262} 1979/06/18
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251} 1994/07/11
New Fuel Priming Pump And Improved Gasket Used{1258} 1994/08/22
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261} 1999/04/12
New Primary Fuel Filters are Available {1260, 1261} 2008/07/14

Installation of Fuel/Water Separator{1260, 1263} Installation of Fuel/Water Separator{1260, 1263}

295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280} 295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
FUEL AR-HEAVY DISTILLATE

Diesel Fuel Recommendation Expanded{1280} 1977/02/14
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280} 1979/02/05

Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280} Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
FUEL SYSTEM GP

Modification Of Puller Bolt Prevents Thread Damage During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253} 1980/11/03
Use Two Wrenches On Fuel Line Nuts{1254,1252} 1981/04/13
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252} 1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775} 1988/05/23
New Guideline For Product Information, SEBF8340, &quot; Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)&quot; Available {0374,1250} 1998/06/22

370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280} 284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280} 284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713} Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706} 169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
GOVERNOR GP

Injection Nozzle (7N449)<BR> (Sleeve Metering Fuel System - DI) 3306 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - PC) 3306 VEHICULAR ENGINE

New Fuel Injection Nozzle Assembly Used{1254} 1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264} 1981/02/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626} 1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253} 1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286} 1981/09/14
New Torque Specification For Bushing{0374,1253,1251} 1982/01/18
Modification Of 2P8315 Bracket Assembly{0652,1286} 1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264} 1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264} 1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254} 1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281} 1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287} 1985/11/18
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253} 1986/03/10
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281} 1986/06/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254} 1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251} 1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620} 1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257} 1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622} 1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251} 1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286} 1979/08/13
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281} 1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264} 1991/12/02
Governor Spring Guide Press Depth{1287,1284} 1996/01/22

Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250} Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Wiring Polarity on Woodward 2301 Governors{1289} Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253} Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264} Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251} Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}

3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life 3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
LINES GP-FUEL

6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254} 1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254} 1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651} 1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254} 1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254} 1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254} 1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652} 1982/11/22
New Bleed Screw Used In Fuel Injection Nozzle{1254} 1985/09/23
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254} 1986/04/07
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336} 1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254} 1977/10/31
New Drive Adapters For Fuel Injection Test Bench{0650} 1978/09/11
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250} 1979/07/02
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254} 1992/04/20

Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254} Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782} 7000 Series Nozzles{0782}
LINES GP-FUEL INJECTION

Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254} 2008/12/01

PRODUCT LINE ADDITION: REMANUFACTURED FUEL INJECTORS FOR VARIOUS INDUSTRIAL, MACHINE, AND MARINE ENGINE APPLICATIONS PRODUCT LINE ADDITION: REMANUFACTURED FUEL INJECTORS FOR VARIOUS INDUSTRIAL, MACHINE, AND MARINE ENGINE APPLICATIONS
METER GP-SERVICE

Self-Powered Hour Meters Available{7480,7450} 1987/02/16
MISCELLANEOUS INFORMATION
New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622} 1982/02/08
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557} 1985/10/28
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782} 1986/06/16
Improved Fuel Priming Pump Used{1258} 1987/04/20
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250} 1978/02/06
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652} 1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374} 1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782} 1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782} 1988/04/18
Lubricity Limit Added To Preferred Distillate Fuel Recommendation {1280,7568} 1997/08/18

Use Of 3P2200 Calibration Tool Group{0650, 1250} Use Of 3P2200 Calibration Tool Group{0650, 1250}
Installation Of 8N3569 (24V) Or 9N5458 (12V) Fuel Boost Pump Group{1250} Installation Of 8N3569 (24V) Or 9N5458 (12V) Fuel Boost Pump Group{1250}
PUMP GP-FUEL INJECTION

Fuel System Timing 3306 VEHICULAR ENGINE
Fuel Injection Equipment<BR> (Sleeve Metering Fuel System - PC) 3306 VEHICULAR ENGINE
Fuel Injection Equipment<BR> (Sleeve Metering Fuel System - DI) 3306 VEHICULAR ENGINE
Fuel Injection Equipment<BR> (Scroll Fuel System - PC) 3306 VEHICULAR ENGINE

New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652} 1977/01/17

Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286} Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
PUMP GP-FUEL PRIMING

Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258} 2004/03/29
An Improved Hand Operated Fuel Priming Pump Is Available {1258} 2012/10/04

An Improved Hand Operated Fuel Priming Pump Is Available {1258} 2012/10/08

An Improved Hand Operated Fuel Priming Pump Is Available {1258} 2012/10/08

Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258} Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
PUMP GP-FUEL TRANSFER

Fuel Transfer Pump<BR> (Sleeve Metering Fuel System - PC) 3306 VEHICULAR ENGINE
Fuel Transfer Pump<BR> (Sleeve Metering Fuel System - DI) 3306 VEHICULAR ENGINE
Fuel Transfer Pump (4N4864)<BR> (Scroll Fuel System - PC) 3306 VEHICULAR ENGINE
TANK GP-FUEL

Updated Fuel Tank Caps Are Now Available {1273} 2004/03/15
Updated Fuel Tank Caps Are Now Available {1273} 2013/03/22
Conversion Kits are Available to Convert Caterpillar or Wiggins Fast Fuel System Threaded Receivers to Caterpillar Flange Mounted Receivers {1710} 2004/03/29
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000} 2005/12/19
TOOLS
6V3071 Seal Guide Keeps Seal In Position During Installation Of Transfer Pump {0620,1256} 1980/09/22
Correct Use Of The 6V4141 Sleeve Metering Calibration Tool Group{0600,0766,0778} 1984/10/01
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254} 1977/10/17
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254} 1978/03/27
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650} 1978/08/28
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651} 1978/10/09
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651} 1979/06/25
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325} 1979/10/08

Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782} Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Using The 5P-4150 Nozzle Testing Group{0782} Using The 5P-4150 Nozzle Testing Group{0782}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250} Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Using The 6V4950 Injection Line Speed Pickup Group{0782} Using The 6V4950 Injection Line Speed Pickup Group{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782} Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Using 8S2305, 9S228, And 6V9128 Rack Position Tool Groups{0782, 1250} Using 8S2305, 9S228, And 6V9128 Rack Position Tool Groups{0782, 1250}
Using The 8T1000 Position Indicator Group{0760, 0762} Using The 8T1000 Position Indicator Group{0760, 0762}
Use Of 6V4141 Sleeve Metering Calibration Tool Group{0778, 0782} Use Of 6V4141 Sleeve Metering Calibration Tool Group{0778, 0782}

9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706} 9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280} Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
Truck sale:
 
CATERPILLAR 14E 1973 - MOTOR GRADERS ALTORFER INC.
2600 6th Street SW - Cedar Rapids - Io
 
CATERPILLAR 14E 1973 - MOTOR GRADERS EMPIRE MACHINERY CO
1725 South Country Club Drive - Mesa -
 
 
CATERPILLAR 14E 1973 - MOTOR GRADERS EMPIRE MACHINERY CO
1725 South Country Club Drive - Mesa -
 
CAT 14E THE AUCTION CO
Colton, California
USD $22,500 
1973 CAT 14E TNT Truck & Machinery Sales
Fremont, Nebraska


You can buy parts on Amazon: .

$17.42
14-11-2018
Caterpillar Bearing-Ball 2H3712 New

2H3712  
$15.42
14-11-2018
Caterpillar Bearing 5L2652 New

5L2652  
$146.68
14-11-2018
Caterpillar Spring-Recoil 0990166 New

0990166