For full view, you need register
Parts on group HOLLOW DRIVE SHAFT (SYNCHRONIZED TRANSMISSION):
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | L33270 | [1] | Snap Ring | (FOR AL28713) |
| 1. | L60559 | [1] | Snap Ring | (FOR AL64050) |
| 2. | L60560 | [1] | Thrust Washer | (FOR AL64050) |
| 3. | JD10072 | [1] | Needle Bearing | OD= 55MM (2.165") (FOR AL28713) |
| 3. | AL63097 | [1] | Needle Bearing | OD= 50MM (1.969") (FOR AL64050) |
| 4. | AL28713 | [1] | Drive Shaft | Z=29/14, ID= 55MM (2.165") (ORDER AL64050, L60560, L60559, AL63097) |
| 4. | AL64050 | [1] | Drive Shaft | Z=29/14, ID= 50MM (1.969") |
| 5. | JD10102 | [1] | Bearing Cone | |
| 6. | JD10341 | [1] | Bearing Cup | OD= 92.5MM (3.642") |
| 7. | 40M1873 | [1] | Snap Ring | 90X3MM (FOR AL38551) |
| 7. | L41669 | [1] | Snap Ring | (FOR AL64570) |
| 8. | L57619 | [1] | Flange | (FOR AL66781) |
| 9. | L61496 | [3] | Screw | (FOR AL66781) |
| 10. | AL60717 | [1] | Shim Kit | |
| 11. | L58121 | [1] | Washer | TK= 4.55MM (0.179") |
| 11. | L58120 | [1] | Washer | TK= 4.60MM (0.181") |
| 11. | L58119 | [1] | Washer | TK= 4.65MM (0.183") |
| 11. | L58118 | [1] | Washer | TK= 4.70MM (0.185") |
| 11. | L58115 | [1] | Washer | TK= 4.75MM (0.187") |
| 11. | L58107 | [1] | Washer | TK= 4.80MM (0.189") |
| 11. | L58108 | [1] | Washer | TK= 4.85MM (0.191") |
| 11. | L58109 | [1] | Washer | TK= 4.90MM (0.193") |
| 11. | L58110 | [1] | Washer | TK= 4.95MM (0.195") |
| 11. | L58111 | [1] | Washer | TK= 5.00MM (0.197") |
| 11. | L58112 | [1] | Washer | TK= 5.05MM (0.199") |
| 11. | L58113 | [1] | Washer | TK= 5.10MM (0.201") |
| 11. | L58114 | [1] | Washer | TK= 5.15MM (0.203") |
| 11. | L56005 | [1] | Lock Washer | TK= 5.20MM (0.205") |
| 11. | L56377 | [1] | Lock Washer | TK= 5.25MM (0.207") |
| 12. | L58721 | [1] | Shim | TK= 0.70MM (0.028") |
| 13. | L33030 | [1] | Washer | (A: ORDER KEY 10, 11 OR 12 AS REQUIRED) |
| 14. | L33028 | [AR] | Shim | (A: ORDER KEY 10, 11 OR 12 AS REQUIRED) TK= 0.100MM (0.004") |
| 14. | L33027 | [AR] | Shim | (A: ORDER KEY 10, 11 OR 12 AS REQUIRED) TK= 0.150MM (0.006") |
| 14. | L33029 | [AR] | Shim | (A: ORDER KEY 10, 11 OR 12 AS REQUIRED) TK= 0.250MM (0.010") |
| 15. | JD10067 | [1] | Bearing Cup | |
| 16. | JD10068 | [1] | Bearing Cone | |
| 17. | L55841 | [1] | Nut | (SUB FOR L33059, L41792) |
| 18. | 19M7329 | [1] | Cap Screw | M10 X 75 |
| 19. | L33065 | [1] | Washer | NLA; ORDER L79871 |
| 19. | L79871 | [1] | Washer | |
| 20. | JD10069 | [1] | Tapered Roller Bearing | |
| 21. | L41604 | [1] | Gear | Z=25 (SUB FOR L33062 APPL) |
| 22. | L33066 | [1] | Shaft | |
| 23. | JD10103 | [1] | Bearing Cup | OD= 90MM (3.543") (FOR AL38551) |