For full view, you need register
Parts on group Field Installed Blade:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | T120981 | [1] | Cutting Edge | (FOR USE WITH 3050MM (120 INCH) BLADE) |
| 2. | ........ | [1] | Moldboard | (SUB AT159123 ) (ALSO ORDER AT161734)(FOR 120 INCH) |
| 2. | ........ | [1] | Moldboard | (SUB FOR AT159119)(FOR 120 INCH) (ORDER COMPONENT PARTS) |
| 2. | ........ | [1] | Moldboard | (SUB AT159137)(FOR 114 INCH) |
| 2. | ........ | [1] | Moldboard | (SUB FOR AT162026)(FOR 120 INCH) |
| 2. | ........ | [1] | Moldboard | (NO LONGER AVAILABLE) (SUB FOR AT162654 (FOR 114 INCH)) |
| 2. | ........ | [1] | Moldboard | (SUB AT162667)(FOR 90 INCH) |
| 3. | AT157247 | [1] | Self-Aligning Bushing | (SUB FOR AT116557 AND AT125755) |
| 4. | T70286 | [AR] | Bolt | (15 USED WITH 120 INCH BLADE) (13 USED WITH OTHER BLADES) |
| 5. | T118542 | [2] | Bushing | (PITCH PIN) (USE WITH T118544 PITCH STRUT) |
| 5. | T162396 | [1] | Lubrication Fitting | (SUB FOR JD7798)(PITCH PIN) |
| 5. | T126821 | [1] | Bushing | (USE WITH T124243 PITCH STRUT) (ALSO ORDER T126814 (UNDER PITCH STRUT IN BLADE MOUNT)) |
| 6. | T119857 | [6] | Bushing | (RUBBER BUSHING) (USE ON T120010 ANGLE AND TILT CYLINDER SPACER) |
| 6. | T120010 | [6] | Bushing | (SPACER BUSHING) (2-TILT CYLINDER PIN, 4-ANGLE CYLINDER PIN) |
| 7. | T10510 | [AR] | Washer | (15 USED WITH 120 INCH BLADE) (13 USED WITH OTHER BLADES) |
| 8. | 14H1058 | [AR] | Nut | 3/4" (15 USED WITH 120 INCH BLADE) (13 USED WITH OHTER BLADES) |
| 9. | 19M7364 | [4] | Cap Screw | M12 X 80 |
| 10. | 19M7403 | [1] | Cap Screw | M12 X 35 (PITCH PIN) |
| 11. | 28H3449 | [1] | Bushing | 0.546" X 0.840" X 1/2" |
| 12. | 19M8093 | [2] | Cap Screw | M10 X 100 |
| 13. | AT120388 | [1] | Pin Fastener | (PITCH) |
| 14. | T124132 | [2] | Plate | (SUB FOR T104703) |
| 15. | T104741 | [1] | Pin Fastener | (ANGLE CYLINDER) |
| 16. | T104739 | [1] | Pin Fastener | (TILT CYLINDER) |
| 17. | 24H1790 | [1] | Washer | 17/32" X 1-1/2" X 0.164" (PITCH PIN SCREW) |
| 18. | 14M7517 | [2] | Lock Nut | M10 (ANGLE AND TILT PIN SCREWS)(104 AND 120 INCH) |
| 19. | T162841 | [2] | Dura-Max Cutting Edge | (SUB FOR T120978, THIS APPLICATION)(STANDARD) |
| 19. | T84555 | [1] | Dura-Max Cutting Edge | (RIGHT END FORMED BIT-CURVED) |
| 19. | T84556 | [1] | Dura-Max Cutting Edge | (LEFT END FORMED BIT-CURVED) |
| 20. | 14M7319 | [4] | Lock Nut | M12 |
| 21. | ........ | [1] | Dozer Blade | (SUB DOZER BLADE) |
| 22. | T122487 | [1] | Bushing | RUBBER BUSHING (USE ON T118542 SPACER ON UPPER SIDE OF PITCH PIN) |
| 23. | R64682 | [AR] | Washer | |
| 24. | T112826 | [2] | Spacer | (USE ON T112826 SPACER, BLADE TO C FRAME) |
| 24. | T119859 | [2] | Bushing | (USE ON T112826 SPACER, BLADE TO C FRAME) (RUBBER) (TWO USED ON T112826 SPACER, BLADE TO C FRAME) |
| 25. | T162396 | [1] | Lubrication Fitting | (SUB FOR JD7798) |
| 26. | 14M7328 | [1] | Lock Nut | M16 |
| 27. | T122600 | [1] | Pin Fastener | (BLADE) |
| 28. | 19M7732 | [1] | Cap Screw | M16 X 130 |
| 29. | AT173571 | [1] | Kit | (BLADE CONVERSION KIT FOR UNITS WITH SERIAL NUMBER 785733 AND BELOW INCLUDES PARTS TO CONVERT OLD STYLE SPHERICAL BUSHING AND PIN BLADES TO MOUNT ON BALL SOCKET STYLE C-FRAMES ) (ALSO ORDER AT161734 C-FRAME CONVERSION KIT FOR UNITS WITH SERIAL NUMBER |
| 29. | T180534 | [1] | Socket | (SUB FOR T146821)STANDARD SOCKET (USED WHEN NOT WANTING TO CONVERT OVER FROM OLD TO NEW) (BETTER ILLUSTRATED ON ANOTHER PAGE) |
| 30. | AT86644 | [1] | Dozer Blade | (3050MM (120 INCH) |
| 30. | ........ | [1] | Dozer Blade | (SUB FOR AT159119)(3050 MM (120 INCH) (ORDER COMPONENT PARTS) |
| 30. | AT160967 | [1] | Dozer Blade | (2896 MM (114 INCH) |
| 30. | ........ | [1] | Dozer Blade | (NO LONGER AVAILABLE) (SUB FOR AT162026 (3050 MM(120 INCH)) |
| 30. | ........ | [1] | Dozer Blade | (NO LONGER AVAILABLE) (SUB FOR AT162654 (2896 MM(114 INCH)) |
| 30. | AT162666 | [1] | Dozer Blade | (2286 MM(90 INCH) |
| 30. | AT163119 | [1] | Dozer Blade | (DX75M) (2896MM(114 INCH) |
| 30. | AT163122 | [1] | Dozer Blade | (DX75M) (3050 MM(120 INCH) |