For full view, you need register
Parts on group Dozer Control Valve Linkage Two Lever (764255 - ):
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 19H2477 | [1] | Cap Screw | 5/16" X 1-1/4" (RESTRAIN LINK TO RESERVOIR) |
| 2. | T128678 | [2] | Washer | |
| 3. | AT49297 | [1] | Link End | (RETAINING LINK TO RESERVOIR) |
| 4. | 14H882 | [3] | Nut | 5/16" (RETAINS BALLJOINT TO LINK) |
| 5. | AT133014 | [1] | Link | |
| 6. | R11151 | [5] | Lock Nut | (RESTRAINING LINK TO LEVER BASE) (RESTRAINING LINK CAPSCREW) (TWO USED-LINKS TO BALLJOINTS) (ANGLE LEVER TO LINK) |
| 7. | 22H1009 | [2] | Set Screw | 1/4" X 5/16" (TIGHTEN AFTER SPECIAL NUT IS TIGHT) (INSTALL INTO SPECIAL BOLT HEAD AFTER LONG BALLJOINT INSTALLED) |
| 8. | T120990 | [1] | Nut | (TIGHTEN NUT SECURELY AND INSTALL SET SCREW) |
| 9. | 24H1265 | [5] | Washer | 13/16" X 1-1/4" X 0.060" (K) (BETWEEN PIVOT SHAFT ADJUSTABLE NUT AND PLASTIC COVER) |
| 10. | 24H1390 | [2] | Shim | (ADJACENT TO BUSHING) |
| 11. | T104220 | [4] | Washer | (K) (INSTALL TWO IN ANGLE LEVER) (PRESS TWO INTO LEVER BASE) |
| 12. | 19H2551 | [3] | Cap Screw | 5/16" X 3/4" (BALLJOINTS TO LEVER BASE) |
| 13. | 24M7238 | [3] | Washer | 8.700 X 17 X 2 MM (SMALL BALLJOINT CAPSCREWS TO LEVER BASE) |
| 14. | AT125890 | [1] | Base | (ASSEMBLE TO LEVER BASE) |
| 15. | AT48548 | [3] | Ball Joint | |
| 16. | T123241 | [1] | Bolt | |
| 17. | AT124107 | [1] | Ball Joint | (INSERT LONG LEG INTO SPECIAL BOLT AND THREAD TILL IT BOTTOMS) |
| 18. | 14H865 | [1] | Nut | 1/2" (SECURE LONG BALLJOINT TO STRAP ON RESERVOIR FRONT PLATE) |
| 19. | 11M7081 | [3] | Cotter Pin | 2.500 X 20 MM (TWO SPOOL PINS) (ANGLE LEVER SPOOL PIN) |
| 20. | AT133015 | [2] | Link | (LIFT AND TILT CONNECTING LINK) |
| 21. | P10456 | [3] | Pin Fastener | (2 USED-LIFT AND TILT SPOOLS) (CONNECTING LINK TO VALVE SPOOL) |
| 22. | 19H3307 | [1] | Cap Screw | 3/4" X 6" (PIVOT FOR ANGLE LEVER) |
| 23. | AT125892 | [1] | Support | |
| 24. | 24M7240 | [2] | Washer | 13 X 25 X 3 MM (PIVOT SHAFT SUPPORT NUTS) |
| 25. | 19M7403 | [2] | Cap Screw | M12 X 35 (PIVOT SHAFT SUPPORT TO RESERVOIR) |
| 26. | 14M7275 | [2] | Nut | M12 (PIVOT SHAFT SUPPORT TO RESERVOIR) |
| 27. | 14H793 | [3] | Nut | 3/4" (TIGHTEN LEVER SHAFT ASSEMBLY UNTIL THERE IS MINIMUM SIDE PLAY ON ANGLE LEVER) (USE A LOCKNUT AGAINST ADJUSTMENT NUT) (SECURE PIVOT SHAFT TO SUPPORT TO KEEP FROM ROTATING) |
| 28. | AT104703 | [1] | Ball Joint | |
| 29. | AT113792 | [1] | Tie Rod Assembly | (ANGLE FUNCTION TO THIRD VALVE SPOOL) |
| 30. | T104482 | [2] | Bushing | (BETWEEN THICK PLASTIC SPACER AND OUTBOARD SUPPORT ARM) |
| 31. | T104483 | [1] | Bushing | (BETWEEN LEVER AND OUTBOARD SUPPORT ARM) |
| 32. | T13333 | [AR] | Shim | (ONE ON EITHER SIDE OF LEVER - USE REMAINING TO SHIM LEVER IN POSITION) |
| 33. | AT113704 | [1] | Lever | (ANGLE FUNCTION INBOARD SLOT) |
| 34. | T71570 | [1] | Grip | (ANGLE LEVER) |
| 35. | T123244 | [1] | Nut | (RETAINS LEVER ARM TO LEVER BASE) |
| 36. | 14M7260 | [1] | Nut | M16 (JAM NUT TO TIGHTEN LEVER TO BASE) |
| 37. | T124157 | [1] | Shaft | (SECOND LEVER) |
| 38. | T68099 | [1] | Knob | (SECOND FUNCTION LEVER) |