For full view, you need register
Parts on group Frame And Mast (Radial Ripper For 450G And 455G Crawler):
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 19M7872 | [4] | Cap Screw | M12 X 25 (PIN RETAINER TO RIPPER MAST) |
| 2. | 24H1162 | [4] | Washer | 17/32" X 1-1/4" X 0.060" |
| 3. | 28H3418 | [4] | Washer | 0.546" X 0.840" X 5/16" |
| 4. | AT120459 | [2] | Pin Fastener | (CYLINDER TO MAST) |
| 5. | AT104882 | [2] | Mast | (RIPPER) (TO REAR OF TRANSVERSE HOUSING) |
| 6. | U11651 | [10] | Washer | (4 USED-INSTALL AT HEAD END, HYDRAULIC CYLINDER PIVOT, OPPOSITE THE TRACTOR CENTERLINE) (4 USED-RIPPER MAST TO RIPPER FRAME PINS-INSTALL 2 WASHERS TO OUTSIDE OF TRACTOR RIGHT SIDE; INSTALL 2 WASHERS TO INSIDE OF TRACTOR LEFT SIDE) (2 USED-RIPPER CYLI |
| 7. | U42521 | [2] | Bushing | (INSTALL ON THE HEAD END, HYDRAULIC CYLINDER PIVOT, TOWARD THE TRACTOR CENTERLINE) |
| 8. | 19M7358 | [1] | Cap Screw | M10 X 40 (TO CLAMP AT SUPPORT BRACKET) |
| 9. | 19M8224 | [16] | Cap Screw | M20 X 60 (RIPPER MAST TO TRANSVERSE HOUSING COVER) |
| 10. | 24M7242 | [16] | Washer | 21.400 X 42 X 5 MM |
| 11. | T105414 | [1] | Bracket | (HYDRAULIC HOSE SUPPORT) |
| 12. | T38967 | [1] | Clamp | (HYDRAULIC HOSE TO SUPPORT BRACKET) |
| 13. | U10699 | [2] | Bushing | |
| 14. | JD7759 | [4] | Lubrication Fitting | |
| 15. | AT120460 | [2] | Pin Fastener | (RIPPER FRAME TO MAST WITH GREASE FITTING) |
| 16. | 11H223 | [2] | Cotter Pin | 3/8" X 2" |
| 17. | AU11564 | [2] | Pin Fastener | (CYLINDER ROD TO RIPPER FRAME) (WITH GREASE FITTING) |
| 18. | 24M7239 | [1] | Washer | 10.700 X 21 X 2.500 MM |
| 19. | U15522 | [AR] | Groove Pin | (3 TO 5 USED) |
| 20. | U15517 | [AR] | Tooth | (3 TO 5 USED) |
| 21. | T66192 | [AR] | Shank | (3 TO 5 USED) |
| 22. | ........ | [AR] | Lock | (SUB AT57474 ) (SUB FOR U17204)(3 TO 5 USED) |
| 23. | U40130 | [AR] | Leaf Spring | (3 TO 5 USED) |
| 24. | 19H2020 | [AR] | Cap Screw | 5/16" X 1/2" (3 TO 5 USED) |
| 24. | 12M7065 | [AR] | Lock Washer | 8 MM (3 TO 5 USED) |
| 25. | 14M7274 | [1] | Nut | M10 (HOSE CLAMP TO SUPPORT BRACKET SCREW) |
| 26. | U10120 | [2] | Bushing | (INSTALL ON THE RIPPER FRAME PIVOT PIN, TOWARD THE TRACTOR CENTERLINE) |
| 27. | AT125241 | [1] | Ripper | (DOZER VERSION) (ALSO INCLUDES HYDRAULICS SHOWN ON DIFFERENT PAGES) |
| 27. | AT104897 | [1] | Ripper | (LOADER VERSION) (ALSO INCLUDES HYDRAULICS SHOWN ON DIFFERENT PAGES) |