For full view, you need register
Parts on group Hydraulics For Radial Ripper (450G And 455G Crawler):
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | T78646 | [4] | Adapter Fitting | |
| 2. | T77613 | [16] | O-Ring | |
| 3. | R26906 | [2] | O-Ring | |
| 4. | 38H1172 | [2] | Adapter Fitting | (DOZERS) (CONTROL VALVE TO HOSE) |
| 4. | 38H1338 | [2] | Adapter Fitting | (LOADERS) (UPPER AND LOWER THIRD FUNCTION VALVE PORTS) |
| 5. | 38H1205 | [2] | Tee Fitting | |
| 6. | AR21841 | [2] | Clamp | (HOSES-FROM ROD END CYLINDER TO TEE-CLAMP TO CYLINDER BARREL 170 MM (6.75IN) FROM LINE OF CENTER HEAD END PIN) |
| 7. | AT104884 | [2] | Hydraulic Hose - Fabricate | 17.4752" X 750 MM (29-1/2") X 17.4752" (ROD END LIFT CYLINDER TO TEE) |
| 8. | AT104883 | [2] | Hydraulic Hose - Fabricate | 17.4752" X 335 MM (13-1/4") X 17.4752" (HEAD END LIFT CYLINDER TO TEE) |
| 9. | AT104885 | [2] | Hydraulic Hose - Fabricate | 17.4752" X 1450 MM (57") X 17.4752" (CONTROL VALVE TO TEES-HEAD END TO LOWER PORT-ROD END TO UPPER PORT) |
| 10. | T121143 | [2] | Orifice | |
| 11. | 14M7274 | [2] | Nut | M10 (HOSE PRESSURE LINE CLAMP SCREWS) |
| 12. | 24M7239 | [2] | Washer | 10.700 X 21 X 2.500 MM |
| 13. | U13055 | [4] | Clamp | (TO HOSE CONNECTORS AT BOTH SIDES OF "T" UNION) |
| 14. | 28H1519 | [2] | Washer | 0.493" X 0.675" X 3/8" (TO TUBE CLAMP) |
| 15. | 19M7550 | [1] | Cap Screw | M10 X 35 |
| 16. | 19M7938 | [2] | Cap Screw | M10 X 20 (HOSE PRESSURE LINE CLAMPS) |
| 17. | AT125241 | [1] | Ripper | (DOZER VERSION) (ALSO INCLUDES MAST AND FRAME SHOWN ON DIFFERENT PAGE) |
| 17. | AT104897 | [1] | Ripper | (LOADER VERSION) (ALSO INCLUDES MAST AND FRAME SHOWN ON DIFFERENT PAGE) |