For full view, you need register
Parts on group Upper Track Carrier Roller (Dozers):
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 19H2633 | [1] | Cap Screw | 3/8" X 1-1/2" |
| 2. | AT135802 | [1] | Seal | (SUB FOR AT78941 AND AT71677) |
| 3. | U13946 | [1] | Washer | (SEAL) |
| 4. | T125615 | [1] | Pipe Plug | (SUB FOR R21630, THIS APPLICATION) |
| 5. | 19H3483 | [2] | Cap Screw | 3/8" X 1-1/8" |
| 6. | 24M7096 | [2] | Washer | 10.500 X 18 X 1.600 MM |
| 7. | T121267 | [1] | Cover | |
| 8. | T36047 | [1] | Gasket | |
| 9. | 19H3295 | [2] | Screw | 3/8" X 3/4" (SUB FOR M2502T) |
| 10. | M2501T | [1] | Washer | |
| 11. | M1111T | [2] | Bushing | |
| 12. | ........ | [1] | Roller | AT117994 NLA, ORDER AT167254 FURNISH NEXT ASSEMBLY |
| 12. | AT105177 | [1] | Roller | NLA, ORDER AT167256. |
| 13. | T21221 | [1] | Shaft | |
| 14. | AT161857 | [1] | Support | (SUB FOR AT85914)(FOUR CARRIER ROLLERS USED ON EARLY 650G'S) (PRESSED FIT SUPPORT) |
| 14. | T175706 | [1] | Support | SPLIT CLAMP |
| 15. | 19M8002 | [4] | Cap Screw | M20 X 55 |
| 15. | 19M7969 | [4] | Cap Screw | M20 X 110 (WITH CARRIER ROLLER SPACER) |
| 16. | T83426 | [4] | Washer | 20.900 X 35.400 X 7.090 MM (0.823" X 1.394" X 0.279") |
| 17. | AT167254 | [1] | Roller | (ALSO ORDER AT135802) |
| 17. | AT167256 | [1] | Roller | (ALSO ORDER AT135802) |
| 18. | T164384 | [2] | Strap | (SPACER BLOCK) (REQUIRES 19M7969 HEX HEAD SCREWS) (REQUIRES TRACK FRAME COVERS T165516 AND T165517 ON 550G) (REQUIRES TRACK FRAME COVERS T165518 AND T165519 ON 650G) |