For full view, you need register
Parts on group Single Reduction Final Drive (DX75, 450G, 455G, 555G STD/WT):
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | T120985 | [1] | Housing | |
| 2. | U10746 | [1] | O-Ring | (PINION QUILL) |
| 3. | T121376 | [AR] | Shim | (.005 INCH THICK)(PINION QUILL) |
| 4. | T121377 | [AR] | Shim | (.007 INCH THICK)(PINION QUILL) |
| 5. | T121378 | [AR] | Shim | (.010 INCH THICK)(PINION QUILL) |
| 6. | T120909 | [1] | Bearing Housing W/O Bearing | (PINION) |
| 7. | JD8223 | [1] | Bearing Cup | (PINION OUTER) |
| 8. | JD8182 | [1] | Bearing Cone | (PINION OUTER) |
| 9. | 19H3579 | [3] | Cap Screw | 1/2" X 1-3/8" (PINION QUILL) |
| 10. | 12H301 | [3] | Lock Washer | 1/2" (PINION QUILL) |
| 11. | T147689 | [1] | Axle | (SUB FOR T105114)(AXLE) (450G LONG TRACK AND STANDARD) (455G STANDARD) |
| T147688 | [1] | Axle | (SUB FOR T105538)(450G WIDE TRACK AND LOW GROUND PRESSURE) (455G WIDE TRACK) | |
| 12. | AT72157 | [1] | Seal | (SUB FOR AT36096)(METAL AND RUBBER RINGS) |
| 12. | AT18941 | [1] | Seal Kit | (RUBBER RINGS ONLY) |
| 13. | JD9055 | [1] | Bearing Cone | (AXLE OUTER) |
| 14. | JD9118 | [1] | Bearing Cup | (AXLE OUTER) |
| 15. | T148994 | [1] | Spacer | (SUB FOR T83329)(AXLE OUTER) |
| 16. | T161932 | [1] | Gear | (SUB FOR T83328)(68 TEETH) |
| 16. | T106838 | [1] | Gear | (66 TEETH) |
| 17A. | ........ | [1] | Pan | (SUB T148795 ) (SUB FOR T118356)(REPLACEMENT PAN) |
| 17B. | T148795 | [1] | Pan | (SUB FOR T118356)(ALSO ORDER (2) 15H690 FOR EACH PAN) (DOES NOT USE KEY 37 RE57836) |
| 18. | 19H2633 | [12] | Cap Screw | 3/8" X 1-1/2" (OIL PAN) |
| 19. | 12H304 | [12] | Lock Washer | 3/8" (OIL PAN) |
| 20. | T147998 | [1] | Gasket | (SUB FOR (2) T122669)(OIL PAN) |
| 21. | 22M7130 | [1] | Set Screw | M16 X 20 (LEFT FINAL DRIVE HOUSING) |
| 22. | T83327 | [1] | Spacer | (AXLE INNER) |
| 23. | T83331 | [AR] | Shim | (.005 INCH THICK)(AXLE) |
| 24. | T83332 | [AR] | Shim | (.007 INCH THICK)(AXLE) |
| 25. | T83333 | [AR] | Shim | (.010 INCH THICK)(AXLE) |
| 26. | 19H3579 | [3] | Cap Screw | 1/2" X 1-3/8" (AXLE INNER BEARING RETAINER) |
| 27. | T83330 | [1] | Retainer | (AXLE) |
| 28. | JD9086 | [1] | Bearing Cone | (AXLE INNER) |
| 29. | JD9119 | [1] | Bearing Cup | (AXLE INNER) |
| 30. | T120970 | [2] | Seal | (HOUSING SURFACE) |
| 31. | AT39525 | [1] | Seal | (PINION INNER) |
| 32. | R57083 | [1] | Bushing | (PINION) |
| 33. | JD8154 | [1] | Bearing Cone | (PINION INNER) |
| 34. | JD8208 | [1] | Bearing Cup | (PINION INNER) |
| 35. | T83325 | [1] | Pinion | (12 TEETH) (244MM) |
| 35. | T105540 | [1] | Pinion | (12 TEETH)(WIDE TRACK) (327.72MM) |
| 35. | T105539 | [1] | Pinion | (10 TEETH) |
| 36. | 15H690 | [2] | Pipe Plug | 3/4" (1 AT EACH END OF EACH OIL PAN) |
| 37. | RE57836 | [1] | Pipe Plug | 12.700 MM (1/2") (SUB FOR 15H561)(IN CENTER DRAIN HOLE) (NOT USED WITH KEY 17B T148795) |
| 38. | 22M7130 | [1] | Set Screw | M16 X 20 (RIGHT FINAL DRIVE HOUSING) |
| 39. | T125579 | [1] | Shaft | (SUB FOR T83350)(STEERING CLUTCH SHAFT) (STEERING CLUTCH TO TRANSMISSION) |