For full view, you need register
Parts on group Single Reduction Final Drive (DX75L, DX75M, 450G LT/LGP):
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1A. | ........ | [1] | Housing | (SUB T148993 ) (ALSO ORDER T148797, T148991, (12) 19M7493 AND (12) 24M7240 ) (SUB FOR T128369)(LEFT FINAL DRIVE) (LOW GROUND PRESSURE UNITS UTILIZE T129311 SPACERS) (DX75L-DX75M-HITACHI-DEERE) |
| 1A. | T148993 | [1] | Housing | (LEFT FINAL DRIVE) (LONG TRACK ONLY) (DX75L-HITACHI-DEERE) |
| 1A. | ........ | [1] | Housing | (SUB T148995 ) (ALSO ORDER T148797, T148991, (12) 19M7493 AND (12) 24M7240 ) (SUB FOR T128368)(RIGHT FINAL DRIVE) (LOW GROUND PRESSURE UNITS UTILIZE T129311 SPACERS) (DX75L-DX75M-HITACHI-DEERE) |
| 1A. | T148995 | [1] | Housing | (RIGHT FINAL DRIVE) (LONG TRACK ONLY) (DX75L-HITACHI-DEERE) |
| 1B. | T148733 | [1] | Housing | (LEFT FINAL DRIVE) (LOW GROUND PRESSURE) (DX75M-HITACHI-DEERE) |
| 1B. | T148732 | [1] | Housing | (RIGHT FINAL DRIVE) (LOW GROUND PRESSURE) (DX75M-HITACHI-DEERE) |
| 2. | U10746 | [1] | O-Ring | (PINION AND IDLER QUILLS) |
| 3. | T121376 | [AR] | Shim | (.005 INCH THICK)(PINION AND IDLER QUILLS) |
| 4. | T121377 | [AR] | Shim | (.007 INCH THICK)(PINION AND IDLER QUILLS) |
| 5. | T121378 | [AR] | Shim | (.010 INCH THICK)(PINION AND IDLER QUILLS) |
| 6. | 12H301 | [3] | Lock Washer | 1/2" (3 EACH PINION AND IDLER QUILL) |
| 7. | 19H3579 | [3] | Cap Screw | 1/2" X 1-3/8" (3 EACH PINION AND IDLER QUILL) |
| 8. | T120909 | [1] | Bearing Housing W/O Bearing | (INPUT PINION) |
| 9. | JD8182 | [1] | Bearing Cone | (INPUT PINION OUTER) |
| 10. | JD8223 | [1] | Bearing Cup | (INPUT PINION OUTER) |
| 11. | AT142406 | [1] | Tapered Roller Bearing | (IDLER GEAR) |
| 12. | R53543 | [1] | O-Ring | (IDLER GEAR SHAFT) |
| 13. | U40708 | [1] | O-Ring | (IDLER GEAR SHAFT) |
| 14. | 19M8061 | [3] | Cap Screw | M12 X 140 (IDLER GEAR SHAFT) |
| 15. | T147689 | [1] | Axle | (SUB FOR T105114)(9 HOLE) (LONG TRACK AND STANDARD) |
| 15. | T147688 | [1] | Axle | (SUB FOR T105538)(9 HOLES USED) (LOW GROUND PRESSURE AND WIDE TRACK) |
| 15. | T148734 | [1] | Axle | (FLANGED AXLE) (FOR LOW GROUND PRESSURE ONLY) |
| 16. | AT72157 | [1] | Seal | (SUB FOR AT36096)(METAL AND RUBBER RINGS) |
| 16. | AT18941 | [1] | Seal Kit | (RUBBER RINGS ONLY) |
| 17. | JD9055 | [1] | Bearing Cone | (AXLE OUTER) (LOW GROUND PRESSURE) |
| 17. | JD9080 | [1] | Bearing Cone | (LOW GROUND PRESSURE) |
| 17. | JD9055 | [1] | Bearing Cone | (AXLE OUTER) (LONG TRACK) |
| 18. | JD9118 | [1] | Bearing Cup | (AXLE OUTER) (LOW GROUND PRESSURE) |
| 18. | JD9138 | [1] | Bearing Cup | (LOW GROUND PRESSURE) |
| 18. | JD9118 | [1] | Bearing Cup | (AXLE OUTER) (LONG TRACK) |
| 19. | T148994 | [1] | Spacer | (SUB FOR T83329)(AXLE OUTER) |
| 19. | T148994 | [1] | Spacer | |
| 19. | T148992 | [1] | Spacer | (AXLE SHAFT OUTER BEARING TO FINAL DRIVE GEAR) |
| 20. | 12H304 | [12] | Lock Washer | 3/8" (OIL PAN) |
| 20. | 24M7240 | [12] | Washer | 13 X 25 X 3 MM |
| 21. | 19H2633 | [12] | Cap Screw | 3/8" X 1-1/2" (OIL PAN) |
| 21. | 19M7493 | [12] | Cap Screw | M12 X 40 |
| 22. | T161932 | [1] | Gear | (SUB FOR T83328)(68 TEETH) (FINAL DRIVE) |
| 23. | T148796 | [1] | Oil Pan | (SUB FOR T118356 ) (ALSO ORDER RE57836 AND (2) 15H690)(FOR EACH PAN) |
| 23. | T148797 | [1] | Oil Pan |