For full view, you need register
Parts on group Single Reduction Final Drive (DX75L, DX75M, 450G LT/LGP):
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 24. | 15H690 | [2] | Pipe Plug | 3/4" (OIL PAN) (AT EACH END OF OIL PAN) |
| 25. | RE57836 | [1] | Pipe Plug | (SUB FOR 15H561)(OIL PAN DRAIN) (IN CENTER DRAIN) |
| 26. | T147998 | [1] | Gasket | (SUB FOR (2) T122669)(OIL PAN) |
| 26. | T148991 | [1] | Gasket | |
| 27. | T83327 | [1] | Spacer | (AXLE INNER) |
| 28. | JD9119 | [2] | Bearing Cup | (AXLE INNER) |
| 29. | JD9086 | [2] | Bearing Cone | (AXLE INNER) |
| 30. | T83330 | [1] | Retainer | (AXLE INNER) |
| 31. | T83331 | [AR] | Shim | (.005 INCH THICK)(AXLE) |
| 32. | T83332 | [AR] | Shim | (.007 INCH THICK)(AXLE) |
| 33. | T83333 | [AR] | Shim | (.010 INCH THICK)(AXLE) |
| 34. | 19H3579 | [3] | Cap Screw | 1/2" X 1-3/8" (AXLE INNER BEARING RETAINER) |
| 35. | 22M7130 | [1] | Set Screw | M16 X 20 (FINAL DRIVE HOUSING) |
| 36. | T128370 | [1] | Gear | (25 TEETH)(IDLER) |
| 37. | T128371 | [1] | Shaft | (IDLER INNER) |
| 38. | T128372 | [1] | Snap Ring | (IDLER GEAR) |
| 39. | T120970 | [2] | Seal | (HOUSING SURFACE) |
| 40. | AT39525 | [1] | Seal | (PINION INNER) |
| 41. | R57083 | [1] | Bushing | (PINION) |
| 42. | JD8154 | [1] | Bearing Cone | (PINION INNER) |
| 43. | JD8208 | [1] | Bearing Cup | (PINION INNER) |
| 44. | T83325 | [1] | Pinion | (12 TEETH) (LONG TRACK) (244MM) |
| 44. | T105540 | [1] | Pinion | (12 TEETH) (LOW GROUND PRESSURE ONLY) (327.72MM) |
| 44. | T140259 | [1] | Pinion | (12 TEETH) (LOW GROUND PRESSURE) (313.35MM) |
| 44. | T83325 | [1] | Pinion | (12 TEETH) (LOW GROUND PRESSURE) (244MM) |
| 45. | T78662 | [1] | Drain Plug | (FINAL DRIVE HOUSING FILL AND LEVEL) |
| 46. | U17409 | [1] | O-Ring | (FINAL DRIVE HOUSING FILL AND LEVEL PLUG) |
| 47. | 22M7130 | [1] | Set Screw | M16 X 20 (FINAL DRIVE HOUSING LOW GROUND PRESSURE ONLY) (PLUG) |