For full view, you need register
Parts on group Transmission And Transverse Components:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | AT141930 | [1] | Cover | (SUB FOR T112668)(TRANSVERSE HOUSING REAR) |
| 2. | 19M7950 | [18] | Cap Screw | M20 X 45 (REAR COVER TO TRANSVERSE HOUSING) |
| 3. | 19M8011 | [13] | Cap Screw | M12 X 30 |
| 4. | 24M7242 | [18] | Washer | 21.400 X 42 X 5 MM |
| 5. | 19M8010 | [2] | Screw | M12 X 30 (TO RECESSED PORTS IN BOTTOM OF TRANSVERSE HOUSING) |
| 5. | 19M8169 | [2] | Screw | M12 X 30 |
| 6. | T128498 | [1] | Housing | (SUB FOR T112166)(450G AND 455G STANDARD) (ALSO ORDER R29936 AND R36636 FOR DIRECT DRIVE UNITS) |
| 6. | T128496 | [1] | Housing | (SUB FOR T112167)(450G, 455G WIDE TRACK AND LOW GROUND PRESSURE ) (550G, 555G AND 650G STANDARD) (ALSO ORDER R29936 AND R36636 FOR DIRECT DRIVE UNITS) |
| 19M7550 | [2] | Cap Screw | M10 X 35 (TO TRANSVERSE HOUSING TOP NEAR LOCKOUT PIN) | |
| 19M7932 | [3] | Cap Screw | M8 X 16 (TO 3 - HOLES IN FORWARD LEFT CORNER OF TRANSVERSE HOUSING TOP - NOT USED FOR LINKAGE BRACKET) | |
| 34M7061 | [2] | Spring Pin | 8 X 20 MM (PRESS INTO 2 HOLES ON TRANSMISSION VALVE MOUNTING SURFACE ON TOP OF TRANSVERSE HOUSING - PIN TO BOTTOM OF HOLE) | |
| 22M7130 | [AR] | Set Screw | M16 X 20 (450G) (IN UNUSED TAPPED HOLE LOCATED NEAR UPPER REAR EDGE OF TRANSVERSE CASE) | |
| 7. | T120960 | [1] | Gasket | (NITRILE BEAD FACES THE REAR COVER) |
| 8. | 19M7872 | [4] | Cap Screw | M12 X 25 |
| 9. | 24M7240 | [17] | Washer | 13 X 25 X 3 MM (13-TO LARGE REAR COVER, 4-TO PTO COVER) |
| 10. | T112669 | [1] | Cover | |
| 11. | T126119 | [1] | Gasket | (SUB FOR T120862) |
| 12. | T66915 | [1] | Dowel Pin | (PRESS INTO TRANSVERSE HOUSING UPPER RIGHT CORNER OF CENTER COMPARTMENT TO STICK OUT 50MM) |
| 13. | 19M7402 | [4] | Cap Screw | M10 X 25 (TO EACH END OF TRANSMISSION SUPPORT SHAFT) |
| 14. | 24H1730 | [4] | Washer | 13/32" X 1-1/2" X 0.120" (TO EACH END OF TRANSMISSION SUPPORT SHAFT) |
| 15. | AT164998 | [1] | Dipstick | (SUB FOR AT104443)(FOR DIRECT DRIVE TRANSMISSION ONLY) (ALSO ORDER T163855 FOR 450G, 550G AND 650G) (ALSO ORDER T149027 FOR 455G AND 555G) |
| 15. | AT164997 | [1] | Dipstick | (SUB FOR AT159504)(DX75M) (VENTED DIPSTICK) (USED WITH TORQUE CONVERTER) |
| 15. | T127695 | [1] | Label | (FRENCH) |
| 15. | T127696 | [1] | Label | (SPANISH) |
| T127019 | [1] | Safety Sign | (DIPSTICK LABEL) (CAUTION RELEASE SLOWLY TRANSMISSION CASE PRESSURIZED) (CENTER ON TOP ROUND PORTION OF TRANSMISSION DIPSTICK) | |
| 16. | 19M7662 | [2] | Cap Screw | M10 X 30 |
| 17. | 24M7239 | [2] | Washer | 10.700 X 21 X 2.500 MM |
| 18. | AT141819 | [1] | Dipstick Tube | (SUB FOR AT104442) |
| 19. | T120860 | [1] | Gasket | |
| 20. | U17027 | [1] | Fitting | (TO REAR HOLE ON BOTTOM OF TRANSVERSE HOUSING) |
| 21. | 15H690 | [2] | Pipe Plug | 3/4" (TO BOTTOM OF TRANSVERSE HOUSING-FRONT HOLES) |
| 22. | T83418 | [2] | Shaft | |
| 23. | T64769 | [1] | Drain Plug | (FOR UNITS NOT EQUIPPED WITH MODEL 4000 WINCH) |
| 24. | U12547 | [1] | O-Ring | (FOR UNITS NOT EQUIPPED WITH MODEL 4000 WINCH) |