For full view, you need register
Parts on group Direction Selector And Speed Selector Transmission Control Linkage:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 16. | 19M8404 | [1] | Cap Screw | M8 X 130 (PARK BRAKE LEVER, POINTS OUTBOARD) |
| 17. | R26858 | [1] | Spring | (HOOK INTO PLATFORM RAIL AHEAD OF SHIFT ROD, AND INTO PROPER HOLE FOR 38MM STRETCH IN PARK) |
| 18. | 14H785 | [3] | Nut | 5/16" (ON 19H1849 SCREW, TWO, RUN ALL THE WAY ON. THIRD NUT AFTER INSERT SCREW INTO SHIFT LEVER) |
| 19. | 19H1849 | [3] | Cap Screw | 5/16" X 1-1/4" (2-THRU HORIZONTAL LINK BALLJOINTS AND LOCK WASHERS INTO LOWER BELLCRANK) (RUN 2- 14H785 NUTS ALL THE WAY UP ON THREADS. INSERT OUTWARD THROUGH PLATE WITH THREE HOLES ON SHIFT LEVER. TIGHTEN A THIRD NUT ONTO SCREW AFTER PROPER HOLE IS |
| 20. | AT112928 | [1] | Ball Joint | (RIGHT HAND THREAD) (GEAR SHIFT LEVER TO BRACKET ON SHIFT QUADRANT) |
| 21. | 19H2309 | [1] | Cap Screw | 3/8" X 1-1/4" (BALL JOINT TO BRACKET ON SHIFT QUADRANT) |
| 22. | 19M7407 | [2] | Cap Screw | M8 X 25 (LOWER BELLCRANK BRACKET TO TRANSVERSE CASE) |
| 23. | 12H303 | [2] | Lock Washer | 5/16" (BETWEEN BELLCRANKS AND BALLJOINTS) |
| 24. | 11M7081 | [2] | Cotter Pin | 2.500 X 20 MM (LOWER BELLCRANK BRACKET PIN FOR DIRECTION SELECTOR BELLCRANK) (PARK BRAKE LOCK BELLCRANK TO LINK STRAP PIN) |
| 25. | T16464 | [1] | Lock Nut | (ON CAPSCREW ON FRONT OF OUTER HORIZONTAL SPEED SELECTOR ROD) |
| 26. | 19M7981 | [1] | Cap Screw | M8 X 55 (LOWER BELLCRANK BRACKET TO TRANSVERSE CASE) |
| 27. | U17338 | [2] | Pin Fastener | (CONNECTOR LINK) (DIRECTION SELECTOR AND SPEED SELECTOR LINKAGE RODS TO TRANSMISSION CONTROL VALVE SPOOLS) |
| 27. | 11M7081 | [2] | Cotter Pin | 2.500 X 20 MM |
| 28. | T130614 | [1] | Pin Fastener | (SUB FOR M63247)(DIRECTION SELECTOR TO LOWER HOLE IN BELLCRANK BRACKET) (DOES NOT HAVE HEAD) (REQUIRES (2) COTTER PINS) |
| 29. | M68954 | [1] | Lock Nut | (RETAINS SHIFT LEVER TO PIVOT BALLJOINT) |
| 30. | R11151 | [4] | Lock Nut | (RETAIN VERTICAL LINK BALLJOINTS TO LOWER BELLCRANKS AND TO GEAR SHIFT LEVER) |
| 31. | 14M7274 | [2] | Nut | M10 (ON CAPSCREWS AFTER BRACKET AND WASHERS) |
| 31. | 24M7239 | [2] | Washer | 10.700 X 21 X 2.500 MM (ON CAP SCREWS AGAINST CAST SURFACE) |
| 31. | 19M7662 | [2] | Cap Screw | M10 X 30 (THROUGH GEARSHIFT MOUNT BRACKET INTO SHIFT QUADRANT CASTING) |
| 32. | T13271 | [1] | Pin Fastener | (INWARD THROUGH PARK LOCK LEVER, THEN THROUGH LINK STRAP) |
| 32. | 11M7081 | [1] | Cotter Pin | 2.500 X 20 MM (ON LEVER PIN AFTER WASHER) |
| 32. | 24M7293 | [AR] | Washer | 6.500 X 13 X 1.600 MM (BETWEEN COTTER PIN AND SPRING GUIDE STRAP ON PARK BRAKE LOCK BELLCRANK TO LINK STRAP PIN) |
| 33. | T121477 | [1] | Strap | (PARK BRAKE LOCK LINK) |
| 33. | 24M7293 | [AR] | Washer | 6.500 X 13 X 1.600 MM (ON LEVER PIN AFTER LINK STRAP) |
| 34. | 11M7081 | [1] | Cotter Pin | 2.500 X 20 MM (SUB FOR R46528, THIS APPLICATION)(PUSH DOWN INTO HOLE OF BELLCRANK PIN WHEN BELLCRANK FORKED END IS IN UPWARD POSITION) |
| 35. | T121418 | [1] | Bracket |