For full view, you need register
Parts on group Third And Fourth Speed Shaft ( - 794088):
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | R39116 | [2] | Washer | (SUB FOR T148380) |
| 2. | T119875 | [1] | Piston | (THIRD SPEED) |
| 3. | R80813 | [5] | Clutch Plate | |
| 4. | AT117908 | [7] | Clutch Disk | |
| 5. | T146753 | [2] | Plate | (SUB FOR R57621, THIS APPLICATION ) (SUB FOR T144106) |
| 6. | AT161339 | [1] | Gear | (USE IF AVAILABLE) (SUB FOR AT105033 (THIRD)) |
| 6. | AT162438 | [1] | Gear | |
| 7. | R28634 | [1] | Pin | |
| 8. | AT104570 | [1] | Shaft | (INCLUDES AT107510) |
| 8. | AT107510 | [1] | Plug | (NOT ILLUSTRATED) (8MM PLUG) (FITS IN SHAFT END) |
| 9. | R31292 | [4] | Piston Ring | |
| 10. | T104706 | [1] | Washer | |
| 11. | T127304 | [4] | Thrust Washer | |
| 12. | T83438 | [2] | Snap Ring | |
| 13. | T83437 | [12] | Washer | |
| 14. | T141680 | [2] | Snap Ring | (SUB FOR R31289)(CLUTCH BACKING PLATE TO DRUM) |
| 15. | AT120523 | [1] | Drum | |
| 15. | AT162369 | [1] | Drum | |
| 16. | R48523 | [2] | Snap Ring | |
| 17. | R79029 | [2] | Seat | |
| 18. | 400R | [2] | Ball | |
| 19. | R73073 | [2] | Spring | |
| 19. | R32690 | [1] | Pin | |
| 20. | R33246 | [2] | Seal | |
| 21. | JD7672 | [1] | Ball Bearing | |
| 22. | F2197R | [4] | Snap Ring | |
| 23. | 26H89 | [2] | Shaft Key | 1/4" X 1-1/8" |
| 24. | AT161338 | [1] | Gear | (SUB FOR AT105032 ) (MARKED T145911)(FOURTH) (45 TEETH) |
| 25. | T119887 | [1] | Piston | (FOURTH SPEED) |
| 26. | R56547 | [2] | Clutch Plate | (SUB FOR R87712)(WAVY PLATE NEXT TO PISTON) (HAS NOTCH IN ONE TANG) |
| 27. | T104610 | [1] | Gear | (450G, 550G, 650G) (THIRD AND FOURTH OUTPUT GEAR) (44 TEETH) (HIGH RANGE OUTPUT) |
| 27. | T104721 | [1] | Gear | (450G) (THIRD AND FOURTH) |
| 27. | T104610 | [1] | Gear | (550G) (THIRD AND FOURTH) (DIRECT DRIVE) |
| 27. | T128031 | [1] | Gear | (650G) (THIRD AND FOURTH) |
| T104721 | [1] | Gear | (455G) (THIRD AND FOURTH OUTPUT GEAR) (42 TEETH) (HIGH RANGE OUTPUT) | |
| T105477 | [1] | Gear | (555G) (THIRD AND FOURTH OUTPUT GEAR) (46 TEETH) (HIGH RANGE OUTPUT) | |
| T105477 | [1] | Gear | (550G) (THIRD AND FOURTH HIGH RANGE OUTPUT GEAR WITH TORQUE CONVERTER) (46 TEETH) | |
| T104610 | [1] | Gear | (450G) (THIRD AND FOURTH HIGH RANGE OUTPUT GEAR WITH TORQUE CONVERTER) (44 TEETH) |