For full view, you need register
Parts on group RIPPER (850J) (SN -XXXXXX):
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 11M7021 | [13] | Cotter Pin | 4 X 25 MM |
| 2. | 19H3417 | [20] | Cap Screw | 1" X 3" |
| 3. | 19H3876 | [6] | Cap Screw | 1-1/4" X 3-1/2" |
| 4. | 19M7403 | [3] | Cap Screw | M12 X 35 |
| 5. | 19M8035 | [2] | Cap Screw | M16 X 35 |
| 6. | 24M7240 | [3] | Washer | 13 X 25 X 3 MM |
| 7. | 24M7243 | [20] | Washer | 25.400 X 50 X 6 MM |
| 8. | 38H1005 | [2] | Elbow Fitting | |
| 9. | R26375 | [2] | O-Ring | |
| 10. | T77857 | [6] | O-Ring | |
| 11. | 38H1039 | [2] | Tee Fitting | |
| 12. | 38H1174 | [2] | Adapter Fitting | |
| 13. | R26906 | [1] | O-Ring | |
| 14. | AT145174 | [4] | Hydraulic Hose - Fabricate | |
| 15. | AT321511 | [4] | Pin | |
| 16. | AT321512 | [6] | Pin | |
| 17. | AT321513 | [3] | Pin | |
| 18. | AT322239 | [2] | Link | |
| 19. | AT354869 | [1] | Lift Arm | (SUB FOR AT322244) |
| 20. | AT322245 | [1] | Frame | |
| 21. | AT322246 | [3] | Shank | |
| 22. | EX25R12 | [3] | Tooth | |
| 23. | EX25RBG | [3] | Bushing | |
| 24. | EX25RPG | [3] | Groove Pin | |
| 25. | JD5756 | [2] | Label | |
| 26. | JD5902 | [2] | Reflector | |
| 27. | JD7799 | [2] | Lubrication Fitting | |
| 28. | R43418 | [13] | Pin Fastener | |
| 29. | T162396 | [10] | Lubrication Fitting | |
| 30. | T215372 | [1] | Plate | |
| 31. | T215373 | [3] | Bar | (FRONT SHANK BEARING (WEAR) BLOCK) |
| 32. | T215374 | [3] | Bar | (REAR SHANK BEARING (WEAR BLOCK)) (FOUND BEHIND FRONT SHANK BEARING (WEAR) BLOCK) |
| 33. | T24510 | [6] | Washer | |
| 34. | T67856 | [8] | Bushing | |
| 35. | H151655 | [8] | Bushing | |
| 36. | AT329074 | [1] | Support | (LH) |
| 37. | AT329073 | [1] | Support | (RH) |
| 38. | ........ | [1] | Ripper Whole Goods | (SUB (1) AT364351 ) (SUB FOR (1) AT311664)(SPECIAL EQUIPMENT FIELD RIPPER) |