For full view, you need register
Parts on group FRONT WHEEL HUBS:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | T41953 | [4] | Bushing | |
| 2. | AT169874 | [1] | Pivot | (RIGHT WHEEL HUB) |
| 3. | T41984 | [1] | Washer | 38.481 X 88.900 X 6.350 MM (1.515" X 3-1/2" X 1/4") |
| 4. | T41963 | [2] | Bushing | |
| 5. | AT335398 | [1] | Spindle | (SUB FOR (1) AT170201 OR (1) AT303855 OR (1) AT317543)(RIGHT WHEEL HUB) |
| 5. | AT335397 | [1] | Spindle | (SUB FOR (1) AT170202 OR (1) AT303854 OR (1) AT317542)(LEFT WHEEL HUB) |
| 6. | T184404 | [2] | Spindle | |
| 7. | RE31702 | [1] | Seal | |
| 8. | R59074 | [1] | Oil Cup | |
| 9. | JD9082 | [1] | Bearing Cone | |
| 10. | JD9141 | [1] | Bearing Cup | |
| 11. | T162428 | [1] | Hub | |
| 12. | JD9113 | [1] | Bearing Cup | |
| 13. | JD9048 | [1] | Bearing Cone | |
| 14. | U42462 | [1] | Washer | 34.925 X 63.500 X 6.350 MM (1-3/8" X 2-1/2" X 1/4") |
| 15. | T41983 | [1] | Gasket | |
| 16. | 14H927 | [1] | Nut | 1-1/4" |
| 17. | 11M7100 | [1] | Cotter Pin | 6.300 X 80 MM |
| 18. | 12M7065 | [3] | Lock Washer | 8 MM |
| 19. | 19H1905 | [3] | Cap Screw | 5/16" X 1" |
| 20. | 24M7239 | [8] | Washer | 10.700 X 21 X 2.500 MM |
| 21. | 19H3065 | [8] | Cap Screw | 3/8" X 2" |
| 22. | AT198517 | [1] | Pin Fastener | |
| 23. | 28H3401 | [1] | Spacer | 0.742" X 1.050" X 5/8" |
| 24. | T146246 | [1] | Washer | 17 X 57.100 X 6.500 MM (0.669" X 2.248" X 0.256") |
| 25. | 19M7489 | [1] | Cap Screw | M16 X 45 |
| 26. | 19H1912 | [2] | Cap Screw | 3/8" X 3-1/2" |
| 27. | T11234 | [2] | Lock Nut | 9.525 MM (3/8") |
| 28. | JD7781 | [2] | Lubrication Fitting | 90% X 21.336 MM LONG (0.840" LONG) |
| 29. | T75447 | [2] | Elbow Fitting | |
| 29. | H80936 | [2] | Elbow Fitting | |
| 30. | AT169864 | [1] | Tie Rod End | |
| 31. | 14H875 | [1] | Nut | 7/8" |
| 32. | T159656 | [1] | Boot | |
| 33. | 11M7023 | [1] | Cotter Pin | 4 X 32 MM (SUB FOR 11M7017) |
| 34. | T41982 | [1] | Cap | |
| 35. | AT169875 | [1] | Pivot | (LEFT WHEEL HUB) |
| 36. | T152862 | [1] | Pin | (WHEEL LEAN CYLINDER MOUNT) |
| 37. | 19M7394 | [3] | Cap Screw | M16 X 25 (3 USED EACH SPINDLE) |
| 38. | 24H1698 | [3] | Washer | 21/32" X 1-5/8" X 1/4" (3 USED EACH SPINDLE) |