For full view, you need register
Parts on group Clutch Assembly (K2) ( - 004094):
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | T173640 | [8] | Disk With Outer Spline | |
| 2. | T173642 | [8] | Disk With Inner Spline | |
| 3. | T116579 | [2] | Ring | |
| 4. | T116486 | [1] | Compression Spring | |
| 5. | T172299 | [1] | Snap Ring | |
| 6. | T294877 | [1] | End Plate | SUB FOR T173643 |
| 7. | T172265 | [AR] | Snap Ring | 3.60 MM (.141") |
| 7. | T172269 | [AR] | Snap Ring | 4.20 MM (.165") |
| 7. | T181877 | [AR] | Snap Ring | 2.4 MM (.095") |
| 7. | T181878 | [AR] | Snap Ring | 2.7 MM (.106") |
| 7. | T181879 | [AR] | Snap Ring | 3.0 MM (.118") |
| 7. | T181880 | [AR] | Snap Ring | 3.3 MM (.123") |
| 8. | T172136 | [2] | Disk | |
| 9. | AT179498 | [2] | Needle Bearing | SUB FOR T172137 |
| 10. | T172138 | [2] | Thrust Washer | |
| 11. | T172139 | [2] | Needle Bearing | |
| 12. | T172140 | [1] | Gear | |
| 13. | T173038 | [1] | Snap Ring | |
| 14. | T294935 | [1] | Bearing | SUB FOR T171156 IMPORTANT-HIGH TOLERANCE BEARING REQUIRED IN THIS LOCATION. DO NOT SUBSTITUTE STANDARD BEARING. |
| 15. | T171209 | [1] | Piston | |
| 15. | T178280 | [1] | Piston | |
| 16. | L40318 | [1] | O-Ring | |
| 17. | T170712 | [1] | O-Ring | |
| 18. | T244799 | [1] | Drum | SUB FOR T171208 |
| 19. | T172115 | [2] | Piston Ring | |
| 20. | T171153 | [1] | Stud | |
| 21. | T294880 | [1] | Universal Driveshaft | SUB FOR T171206 |
| 22. | ........ | [1] | Cap | T171207, NLA |
| 23. | T294935 | [1] | Bearing | SUB FOR T171156 IMPORTANT-HIGH TOLERANCE BEARING REQUIRED IN THIS LOCATION. DO NOT SUBSTITUTE STANDARD BEARING. |
| 24. | T173641 | [1] | Disk With Outer Spline |