1. ARTICULATED DUMP TRUCKS
2. 718 tier 3 1304600-1304699 2009 - 2014
3. Engine Block & Sub Assemblies
4. ENGINE COMPLETE EU FLEX Serial From: 01/01/2012
ENGINE COMPLETE EU FLEX JCB:
For full view, you need register
Parts on group :
| Pos. | Part No | Qty | Parts name | Comments | |
|---|---|---|---|---|---|
| 1. | 333/U3791 | [1] | Engine complete | ||
| 2. | G.A. engine mount front | ||||
| 3. | G.A. engine mount rear | ||||
| 4. | G.A. viscous fan | ||||
| 5. | 332/S8233 | [1] | Damper torsional | ||
| 6. | 1316/0408D | [8] | Setscrew | ||
| 7. | 823/10261 | [8] | Washer Nordlock M10 | ||
| 8. | G.A. flail guard | ||||
| 9. | G.A. compressor | ||||
| 10. | G.A. heater installation | ||||
| 11. | G.A. engine ignition/pre-heat installation | ||||
| 12. | 816/90923 | [1] | Adapter | ||
| 13. | 1406/0019 | [1] | Washer Bonded | ||
| 14. | 25/965400 | [1] | Valve drain & coupling 3/4"-16UNF | ||
| 15. | 816/90985 | [1] | Adapter elbow | heater connection | |
| 17. | 718/56132 | [1] | Cable 840mm long | ||
| 18. | 332/T9784 | [1] | Harness engine | ||
| 19. | 331/36752 | [3] | Bracket support starter wiring | Harness to engine | |
| 20. | 265/02808 | [2] | Bracket mounting P clip | Harness to engine | |
| 21. | 826/00864 | [2] | Clip P 16mm | Harness to engine | |
| 22. | 821/00329 | [5] | Clamp | Harness to engine | |
| 23. | 821/10087 | [1] | Clip P 13mm | ||
| 24. | 727/00003 | [1] | Connector straight | Fit to item 18 | |
| 25. | 1420/0006D | [11] | Washer (M6) | ||
| 26. | 1370/0101D | [1] | Nut Plain M6 | ||
| 27. | 1315/0207D | [2] | Setscrew M6 x 25mm | ||
| 28. | 1370/0103D | [5] | Nut (M6) | ||
| 29. | 1420/0009D | [1] | Washer (M12) | ||
| 30. | 1315/0507D | [1] | Setscrew M12 x 25 mm | ||
| 31. | 1420/0007D | [3] | Washer (M8) | ||
| 32. | 1315/0305D | [3] | Setscrew M8 x 20mm | ||
| 33. | 1315/0205D | [3] | Setscrew M6 x 20mm | ||
| 34. | 1315/0405D | [1] | Setscrew M10 x 20 | ||
| 35. | 1420/0008D | [1] | Washer (M10) | ||
| 36. | 718/07500 | [1] | Strap Earth | Engine to chassis | |