1. BACKHOE LOADER
2. 1CX SERVO 1743000-2479526 2010 - 2017
3. Bodywork
4. BODYWORK INSTALLATION ASSEMBLIES BASE UNIT
BODYWORK INSTALLATION ASSEMBLIES BASE UNIT JCB:
Parts on group :
Pos. | Part No | Qty | Parts name | Comments | |
---|---|---|---|---|---|
1. | Chassis Assembly | ||||
1. | 335/06126 | [1] | Plate cover | ||
2. | Chassis fittings | ||||
2. | 290/01318 | [2] | Gasket | ||
2. | 265/01289 | [1] | Gauge Sight | TORQUE TO 20Nm | |
3. | Hydraulic tank fittings | ||||
3. | 32/904100 | [1] | Strainer Suction 1" BSP Thread, 46AF Hexagon | 1" B.S.P. | |
4. | 926/09504 | [1] | Trim edge protection | ||
5. | 1370/0201D | [18] | Nut Plain M8 | ||
6. | 1315/0203D | [2] | Setscrew M6 x 16mm | ||
6. | 290/01109 | [2] | Plate access | ||
7. | 290/72159 | [1] | Cover access | ||
8. | 1315/0305D | [8] | Setscrew M8 x 20mm | ||
9. | 1411/0003D | [4] | Washer | ||
11. | 1315/0307D | [4] | Setscrew M8 x 25mm | ||
11. | 453/11701 | [2] | Cap breather, 2mm hole press fit | ||
12. | 1425/0007D | [4] | Washer Spring M8 | ||
12. | 1745/0003 | [4] | Plug Blanking | ||
13. | 1406/0018 | [4] | Washer Bonded (1/2" BSP) | ||
13. | 813/00360 | [1] | Gasket 8 Hole | ||
14. | 826/01102 | [6] | Rivet nut M8 | ||
14. | 290/00396 | [1] | Cap hydraulic filler | ||
15. | 826/01799 | [2] | Nut rivet | ||
15. | 834/00526 | [1] | Hose filler | ||
16. | 290/70300 | [1] | Tube filler | ||
18. | 332/F6560 | [2] | Clip wormdrive 60 to 80 Dia | ||
19. | 290/01276 | [4] | Pad adjustable 1mm thick | ||
19. | 821/00169 | [1] | Plate cover | ||
20. | 290/01275 | [2] | Pad adjustable 3mm thick | ||
21. | 290/00397 | [1] | Pad adjustable stop pad 10mm. THK. | ||
22. | 1420/0007D | [4] | Washer (M8) | ||
22. | 826/01105 | [3] | Rivet nut M10 | ||
23. | 926/04800 | [1] | Strip Edging | ||
24. | 826/01800 | [2] | Fastener fir tree | ||
25. | 320/05529 | [1] | Clamp hose 50 to 70 dia | ||
26. | 834/00858 | [1] | Sleeve blanking | ||
27. | 333/R1626 | [1] | Sleeve blanking | ||
28. | 333/R1628 | [2] | Sleeve blanking | ||
29. | 2201/0005 | [2] | Clip Worm Drive 14/27mm | ||
30. | 2201/0014 | [1] | Clip Worm Drive | ||
1. | 718/20059 | [1] | Lead battery, red to m8 ring terminal | ||
1. | 701/E8825 | [1] | Actuator Beacon Lamp | ||
2. | Electrics Assembly | ||||
2. | 718/04500 | [1] | Lead negative | ||
2. | 701/E0001 | [1] | Panel Switch 12V, 2 Position SPCO RW | ||
3. | 701/80184 | [1] | Switch ignition (Ignition key 701/45501) | ||
3. | 715/04300 | [1] | Socket beacon | ||
4. | 290/64100 | [1] | Indicator engine speed | ||
6. | 700/15800 | [3] | Holder warning light | ||
7. | 701/16504 | [1] | Insert alternator warning | ||
8. | 4103/0900 | [0] | Adhesive | A/R FOR IT 4 | |
9. | 701/16506 | [1] | Insert engine oil pressure warning | ||
10. | 700/14002 | [1] | Lens black insert | ||
11. | 701/16505 | [1] | Insert water temp warning | ||
12. | 701/00021 | [1] | Insert oil temperature transmission | ||
13. | 701/16503 | [1] | Insert air filter blocked warning | ||
16. | 701/60010 | [10] | Blank switch panel Panel | ||
17. | 123/00576 | [1] | Grommet Blanking | ||
19. | 704/50078 | [1] | Diode gate, 7 way | ||
20. | 716/10700 | [1] | Plug single diode 2 way | ||
21. | 704/50153 | [1] | Hourmeter | ||
22. | 335/B4669 | [1] | Horn disc, 12V | ||
24. | 1417/0012D | [3] | Washer Ext.Lock Washer 3/8i | ||
25. | 716/30148 | [4] | Relay Mini 12v | ||
26. | 704/10000 | [1] | Alarm buzzer | ||
29. | 204/07006 | [10] | Tie Cable | ||
33. | 716/05705 | [5] | Fuse 10 amp | ||
34. | 716/05703 | [2] | Fuse 5 amp | ||
35. | 701/E0051 | [1] | Switch base | ||
39. | 333/T1327 | [1] | Harness panel,Road light | ||
40. | 333/T1325 | [1] | Frame main | ||
45. | 2410/1306 | [1] | Grommet | ||
46. | 718/07500 | [1] | Strap Earth | ||
55. | 290/00705 | [1] | Bracket mounting | ||
57. | 828/00325 | [1] | Grommet blind | ||
58. | 274/01043 | [15] | Shield harness protection T=1mm | ||
60. | 332/E0988 | [1] | Plug blanking, Deutsch DT 2 way | ||
70. | Socket assembly,Beacon | ||||
80. | 716/05706 | [3] | Fuse 15 amp | ||
90. | 926/43100 | [1] | Cover Battery Terminal Red | ||
100. | 333/R4992 | [1] | Lead buzzer link | ||
1. | 'See Remark' | 290/57000 | |||
3. | Assembly engine | ||||
5. | 332/R7146 | [1] | Engine assembly, 404D-22 37.3kw nat asp | ||
6. | 1370/0008D | [1] | Nut M5 Standard Flanged | ||
7. | 1370/0108D | [1] | Nut Flanged, Standard M6 | ||
1. | Pump Hydrostatic | ||||
1. | 1305/0204Z | [2] | Bolt 3/8" | ||
1. | 332/R5718 | [1] | Valve assembly | ||
1. | 290/72053 | [1] | Filter hydraulic,oil | ||
1A. | 581/18020 | [1] | Element 5 micron Hydraulic | ||
2. | Valve Pressure Divertor Installation | ||||
2. | 45/906800 | [1] | Clamp hub coupling | ||
2. | 1620/2051 | [3] | Adaptor 1/4"BSP x 9/16"SAE | ||
2. | 1620/2068 | [1] | Adaptor 1/2BSP x 1-1/16SAE | ||
3. | 1315/0509D | [2] | Screw M12x35mm | ||
3. | 1620/2059 | [2] | Adaptor 3/4BSP/1-1/16SAE M/M | ||
4. | Hydraulic Main,Assembly | ||||
4. | 1425/0009D | [2] | Washer M12 spring | ||
4. | 1315/3213D | [2] | Bolt M6 x 55 | ||
4. | 816/90659 | [1] | Plug zero leak M10 X 1.0 | ||
5. | Filter Hydraulic oil | ||||
5. | 1420/0006D | [4] | Washer (M6) | ||
5. | 1406/0008 | [1] | Seal Washer | ||
6. | 1370/0103D | [2] | Nut (M6) | ||
7. | 635/80078 | [1] | Hose low pressure | ||
7. | 816/90013 | [1] | Adaptor Tee 1/4F-1/4M-1/4M BSP | ||
8. | 611/22200 | [1] | Hose | ||
8. | 816/90136 | [1] | Adapter tee 3/8M X 3/8M X 1 1/16 | ||
9. | 816/90135 | [1] | Adapter 4 way | ||
9. | 816/60232 | [1] | Adaptor hose | ||
10. | 1356/0002Z | [1] | Nut Backnut(1/4" BSP) | ||
10. | 816/90055 | [5] | Adapter 3/4M X 1 1/16 SAE | ||
10. | 816/90288 | [1] | Adapter 3/4 SAE X 3/8 BSP | ||
11. | 332/V2670 | [1] | Hose HP, 1/4BSP X 1035mm | ||
11. | 701/80325 | [1] | Switch temperature | ||
12. | 612/35500 | [2] | Hose 3/8"BSP x 740mm | ||
12. | 20/925669 | [1] | Motor | ||
13. | 270/00106 | [8] | Tie Cable 385mm | ||
13. | 20/951572 | [1] | Pump gear | ||
13A. | 813/00453 | [1] | O Ring Seal | Betweem item 12 and 13 | |
14. | 611/48500 | [1] | Hose | ||
14. | 816/90134 | [1] | Adapter tee 1/4 X 1/4 X 3/4SAE | ||
15. | 334/P0003 | [1] | Hose 3/4 BSP UHP 565 | ||
15. | 816/90003 | [1] | Adapter tee, M/M/F | ||
16. | 332/V6403 | [1] | Hose UHP, 3/4BSP X 590mm | ||
17. | 332/V2608 | [1] | Hose UHP, 3/4BSP X 780mm | ||
17. | 290/00967 | [1] | Bracket | ||
18. | 121/77603 | [2] | Tie Cable 300mm | ||
18. | 635/32500 | [1] | Hose 3/4"BSP 1090mm long | ||
19. | 25AP/BA142 | [2] | Hose 3/4 BSP LP 142B | ||
20. | 613/07300 | [1] | Hose 1/2"BSP x 480mm | ||
20. | 611/23900 | [1] | Hose 1/4"BSP x 420mm | ||
20. | 816/90056 | [2] | Adapter 7/8 BSP X 1 1/16 SAE | ||
21. | 612/25600 | [1] | Hose | BRAKE VALVE TO TANK | |
21. | 821/00181 | [1] | Clamp Base | ||
22. | 635/32700 | [2] | Hose | ||
22. | 821/00180 | [1] | Clamp Top | ||
23. | 614/25200 | [1] | Hose 5/8" BSP 595 mm | ||
23. | 821/00182 | [1] | Insert clamp | ||
24. | 333/L6528 | [1] | Hose ABI 1/4 BSP HP | ||
25. | 616/80145 | [1] | Hose high pressure | ||
25. | 1315/0414D | [1] | Screw M10x60 | ||
26. | 2401/0508 | [1] | O Ring | ITEM 28 TO TANK | |
26. | 45/908000 | [1] | Adaptor pressure test point 9/16-18UNF Male | ||
27. | 816/90049 | [1] | Adapter 1/4 BSP X 9/16 SAE | ||
28. | 25/221216 | [1] | Valve check | ||
28. | 332/U0193 | [4] | Screw cap 3/8"UNF X 7/8" long | ||
30. | 926/09500 | [1] | Strip Edging | APPX 150 LG x 4 OFF | |
30. | 1620/2052 | [1] | Adaptor 3/8BSP X 9/16 | ||
31. | 4001/0100 | [0] | Oil engine | A/R 10W 30 | |
32. | 834/00687 | [1] | Hose suction | ||
33. | 332/V2440 | [1] | Hose HP, 1/4BSP X 715mm | ||
34. | 612/33700 | [1] | Hose | ||
35. | 332/V2517 | [1] | Hose HP, 3/8BSP X 1050mm | ||
36. | 816/90043 | [1] | Adaptor tee M/M/F | ||
37. | 1620/2058 | [1] | Adaptor 3/4BSP x 7/8SAE M/M | ||
38. | 816/90022 | [1] | Cap blanking 5/8"BSP steel | ||
39. | 331/40348 | [1] | Kit split flange 3/4" SAE | ||
40. | Motor drive Installation | ||||
41. | 816/90163 | [3] | Adaptor Elbow M/F | ||
42. | 332/V2646 | [1] | Hose UHP, 3/4BSP X 700mm | ||
43. | 823/10261 | [4] | Washer Nordlock M10 | ||
50. | 332/W3484 | [1] | Motor drive integral sprocket | ||
80. | 1391/3509D | [6] | Capscrew M12 x 35mm | ||
90. | 1420/0009D | [6] | Washer (M12) | ||
110. | 816/90618 | [1] | Adaptor elbow 1/4 | ||
120. | 332/W7640 | [1] | O Ring | ||
5. | Body Assembly | ||||
1. | 290/04400 | [1] | Arm Loader | ||
2. | 290/36300 | [2] | Lever tipping | ||
3. | 290/00137 | [2] | Lever tipping | ||
4. | 290/36400 | [1] | Link Left side | ||
5. | 290/36600 | [1] | Link Right side | ||
6. | Loader end,Assembly | ||||
6. | 290/00139 | [2] | Link level | ||
7. | 331/38092 | [2] | Link tipping | ||
8. | 823/00385 | [0] | Washer (33.25mm x 50mm x 2.5mm) | A/R | |
9. | 809/00108 | [12] | Bush 40mm long | 40 LONG | |
10. | Arm Assembly,Loader | ||||
10. | 809/00104 | [4] | Bush grooved, 40mm long | 40 LONG | |
11. | 809/00109 | [6] | Bush grooved, 25mm long | 25 LONG | |
12. | 332/U8197 | [2] | Pin pivot | LOADER ARMS/CHASSIS | |
13. | 811/50489 | [4] | Pin pivot | LEVEL LINK/CHASSIS | |
14. | 811/50390 | [6] | Pin pivot | 3 POINT LINKS | |
15. | 811/50344 | [2] | Pin pivot, 30mm x 121mm | LIFT RAM EYE END | |
16. | 1450/0001 | [8] | Nipple grease, straight 1/8 BSP | ||
17. | 1450/0002 | [6] | Nipple Grease, Straight 1/4 | ||
18. | 1370/0303D | [2] | Nut Self Lock M10 | ||
19. | 553/60202 | [2] | Ram loader lift 60 X 30 | ||
20. | 553/60201 | [2] | Ram shovel 60 X 30 | ||
21. | 1315/3315D | [12] | Bolt (M8 x 65) | ||
22. | 290/36500 | [1] | Link Left side | ||
23. | 290/36700 | [1] | Link Right side | ||
24. | 140/00826 | [0] | Shim 0.5mm | A/R NOM 6 OFF | |
25. | 140/00828 | [0] | Shim 1.5mm | A/R NOM 6 OFF | |
26. | 1315/3317D | [4] | Bolt M8 x 75mm long | ||
27. | 1370/0203D | [16] | Nut Lock M8 | ||
28. | 1315/3416D | [2] | Bolt M10 x 70mm long | ||
29. | 2410/1303 | [4] | Grommet Blind, 9.5 x 5 mm | ||
30. | 811/50389 | [4] | Pin pivot | TIPPING LEVERS | |
40. | 1450/1001 | [2] | Nipple grease 90deg. angle | ||
1. | 817/17461 | [3] | Decal JCB, black 250mm wide | ||
7. | Label Assembly, Common | ||||
15. | 332/U9442 | [1] | Decal fuses & relays with KAT immobiliser | ||
21. | 817/02160 | [1] | Label Chassis Stamping | ||
1. | 263/24405 | [4] | Mounting | ||
2. | 1315/3720Z | [4] | Bolt M16x100 | 200 Nm | |
3. | 120/16902 | [4] | Plate Rebound | ||
4. | 290/00977 | [2] | Disc mounting | REAR CAB MOUNTS | |
8. | Mounting Assembly, Cab | ||||
11. | 1315/3519Z | [2] | Bolt M12x90mm | ||
12. | 1370/0403Z | [2] | Nut Lock, M12 | ||
13. | 263/24401 | [4] | Washer cupped (hole 21 mm ) | ||
14. | 263/24402 | [4] | Washer cupped (hole 13mm ) | ||
15. | 263/24403 | [4] | Mounting rubber | ||
1. | 333/T2331 | [1] | Floormat | ||
2. | 290/00363 | [2] | Strip retaining | ||
3. | 826/01546 | [4] | Screw M6x30mm | FOR ITEM 2. | |
9. | Floormat Assembly | ||||
1. | 30/927088 | [1] | Radiator assembly | ||
2. | 30/925399 | [1] | Cooler hydraulic oil | ||
3. | 346/00310 | [1] | Cowling fan | ||
4. | 335/05762 | [4] | Bracket radiator mounting | ||
5. | 1315/0407D | [4] | Setscrew M10X25 G8.8 | ||
8. | 1315/0403D | [4] | Setscrew M10 x16mm | ||
9. | 260/26100 | [1] | Bracket expansion bottle | ||
10. | Cooling pack,Assembly | ||||
11. | 332/W3827 | [1] | Hose bottom radiator, Std | ||
12. | 290/72073 | [1] | Filler coolant assembly | ||
13. | 2201/0013 | [2] | Clip Jubilee | ||
14. | 926/09502 | [2] | Strip edging L=220mm | ||
15. | 834/11170 | [1] | Hose top radiator | ||
16. | 332/V8561 | [1] | Hose Cooler to Engine | ||
17. | 332/G4601 | [4] | Clip Worm Drive 35 to 50 Dia | ||
18. | 331/36135 | [4] | Bracket radiator mounting | ||
19. | 331/31026 | [4] | Mounting Anti Vibration | ||
21. | 1425/0008D | [4] | Washer Spring M10 | ||
22. | 926/20701 | [2] | Strip foam sealing | ||
23. | 30/925942 | [1] | Fan 14" Pusher | ||
26. | 829/31303 | [1] | Spacer fan | ||
27. | 1315/0505D | [3] | Screw M12 x 20mm long | ||
29. | 121/59800 | [1] | Bottle expansion, assembly | ||
33. | 2201/0001 | [2] | Clip Worm Drive 8/16mm | ||
34. | 823/00326 | [4] | Washer M10 X 30mm | ||
35. | 823/10399 | [4] | Washer Nordlock M6 | ||
36. | 4101/0200 | [1] | Fluid Locking | ||
38. | 331/52777 | [1] | Plate blanking | ||
39. | 331/52778 | [1] | Plate blanking | ||
40. | 333/R7966 | [1] | Clip Worm Drive WF 25/40mm | ||
41. | 1316/0203D | [4] | Screw | ||
1. | 910/50600 | [1] | Cable assembly, throttle c/w lever | ||
2. | 290/58700 | [1] | Pedal accelerator assembly | ||
3. | 826/01101 | [3] | Rivet nut M6 | ||
4. | 332/S2615 | [1] | Bracket throttle mounting | ||
6. | 1425/0006D | [3] | Washer Spring M6 | FOR ITEM 2 | |
8. | 332/T2445 | [1] | Cable throttle control | ||
9. | 332/S5435 | [1] | Bracket throttle reaction | ||
10. | 1315/0205D | [2] | Setscrew M6 x 20mm | FOR ITEM 9 | |
11. | Throttle Assembly | ||||
12. | 826/01218 | [4] | Screw raised c/sk. head | ||
13. | 826/01333 | [4] | Nut rivet,M5 open ended | ||
15. | 290/01157 | [1] | Bracket throttle reaction hand | ||
16. | 1305/0408D | [1] | Screw 1/2" UNF 11/4" long | FOR ITEM 15 | |
17. | 1370/0301D | [1] | Nut (M10) | FOR ITEM 15 | |
18. | 1420/0008D | [2] | Washer (M10) | FOR ITEM 15 | |
19. | 1412/0001D | [3] | Washer (1/4" Large) | FOR ITEM 2 | |
20. | 529/38602 | [1] | Pin Clevis | ||
22. | 290/01177 | [1] | Plate lever backplate | ||
23. | 814/00301 | [1] | Spring | FOR ITEM 8 | |
24. | 1391/3205 | [2] | Screw cap | FOR ITEM 2 | |
25. | 1391/3212D | [1] | Screw cap M6X15 | FOR ITEM 2 | |
26. | 1370/0101D | [2] | Nut Plain M6 | FOR ITEM 2 AND 28 | |
28. | 1315/0217D | [1] | Bolt M6 X 75 Hex HD | ||
29. | 1315/3409D | [1] | Bolt M10 x 35mm | ||
30. | 331/65152 | [1] | Plate throttle extension | ||
31. | 814/10179 | [1] | Spring Overload | ||
40. | 332/S8896 | [1] | Clip 'E' for 6mm groove | ||
12. | 141/44100 | [1] | Kit , Stabiliser Leg Lock |