1. MINI CRAWLER EXCAVATORS
2. 8014 1626000-1794933 2009 - 2013
3. Index
4. MAIN BUILD .
MAIN BUILD . JCB:
For full view, you need register
Parts on group :
| Pos. | Part No | Qty | Parts name | Comments | |
|---|---|---|---|---|---|
| 1. | Upper Section assembly | ||||
| 1. | 236/60071 | [1] | Frame rear assembly | ||
| 1. | 332/S2389 | [1] | Control | ||
| 1. | 811/90693 | [1] | Pin Slew Lock | ||
| 1. | 332/S4030 | [1] | Plate Foot Plate Moulding Grey | ||
| 1. | 20/925541 | [1] | Motor slew | ||
| 2. | Control floor assembly | ||||
| 2. | 332/W5148 | [1] | Block Bearing Bottom | ||
| 2. | Motor slew assembly | ||||
| 2. | 913/10402 | [1] | Arm Slew Lock | ||
| 2. | 926/50101 | [1] | Seal | ||
| 2. | 1751/0604 | [4] | Adaptor ORFS M -04 /SAE ORB -06 | ||
| 3. | Frame front assembly | ||||
| 3. | 332/W5038 | [1] | Block Top Bearing | ||
| 3. | 831/10344 | [1] | Bush Top Kingpost | ||
| 3. | 331/43883 | [2] | Gaiter Aux. pedal | ||
| 4. | 1315/3825D | [4] | Bolt M20 x 150mm | ||
| 4. | 332/S1796 | [1] | Bracket Right | ||
| 4. | 2103/0405 | [1] | Pin split 4/64 x 1/2 | ||
| 4. | 831/10319 | [1] | Bush Bottom kingpost | ||
| 4. | 821/10159 | [1] | Clamp Ring Loader Lever Gaiter | ||
| 5. | 1422/0012D | [4] | Washer hardened M20 | FOR ITEM 4 | |
| 5. | 811/50177 | [1] | Pin pivot 123mm Long | ||
| 5. | 332/S2326 | [1] | Bracket cast Bridge | ||
| 5. | 331/36999 | [1] | Knob | ||
| 5. | 331/42125 | [1] | Gaiter track lever | ||
| 6. | 335/07372 | [2] | Plate stitch | ||
| 6. | 1391/3310D | [2] | Capscrew M8 x 40mm | ITEM 3 TO 2 RH SIDE | |
| 6. | 1315/3412D | [1] | Bolt M10 x 50 | ||
| 6. | 589/10583 | [1] | Pedal Auxillary/Swing | ||
| 7. | 1370/0301D | [1] | Nut (M10) | ||
| 7. | 1391/3313D | [2] | Capscrew M8 x 55mm | ITEM 3 TO 2 LH SIDE | |
| 8. | 1422/0008D | [12] | Washer Hardened (M10) | FOR ITEM 7 | |
| 8. | 332/S1792 | [1] | Pedal Bridge | ||
| 8. | 1391/3105D | [4] | Screw Cap M5 x 20 | ||
| 9. | Lock slew assembly | ||||
| 9. | 1315/0407D | [3] | Setscrew M10X25 G8.8 | ITEMS 4 & 8 | |
| 9. | 1391/3318D | [2] | Capscrew M8 x 80mm grade 12.9 | ||
| 10. | 1315/3423D | [1] | Bolt M10 x130mm | ||
| 11. | 1315/0408D | [1] | Setscrew M10 x 30mm | ITEM 4 | |
| 11. | 6009/3510D | [15] | Bolt | ||
| 12. | 6009/3522D | [1] | Bolt fine pitch | ||
| 12. | 1315/0307D | [2] | Setscrew M8 x 25mm | ITEM 8 | |
| 12. | 332/S1784 | [1] | Plate Spreader | ||
| 14. | Covers control assembly | ||||
| 14. | 1315/3318D | [1] | Bolt M8 x 80mm | ITEM 17 | |
| 15. | 817/19589 | [2] | Decal Silver horizontal 8014 | APPLY TO SIDE SKIRTS | |
| 16. | 817/19592 | [2] | Decal Silver vertical 8014 | APPLY TO DIPPER | |
| 16. | 1315/0317D | [1] | Screw M8x75 | ITEM 8 | |
| 17. | 331/44897 | [1] | Plate Belly/Sump Guard | ||
| 17. | 589/10222 | [2] | Block pedal | ||
| 18. | 331/42759 | [1] | Plate Valve protection | ||
| 18. | 913/10270 | [1] | Rod Control | ||
| 19. | 913/10269 | [1] | Rod Swing Assembly | ||
| 20. | 332/S2364 | [1] | Link Dozer | ||
| 20. | 1371/0303D | [1] | Nut M10 grade 10.9 | ||
| 21. | 913/00702 | [1] | Pin Clevis | ITEM 20 | |
| 22. | 913/00703 | [1] | Fastener safety | ITEM 20 | |
| 23. | 704/37300 | [1] | Disc , Horn, 12V | ||
| 26. | 335/07245 | [1] | Lever track left hand | ||
| 27. | 335/07246 | [1] | Lever track right hand | ||
| 28. | 331/43310 | [2] | Knob | ITEMS 26,27 | |
| 29. | 826/01397 | [4] | Bolt countersunk | ITEM 3 | |
| 30. | 1370/0103D | [3] | Nut (M6) | ITEMS 18,19 | |
| 30. | 331/68980 | [1] | Frame front slew | ||
| 31. | 332/S4640 | [1] | Spacer | ITEM 5 | |
| 32. | 1315/0412D | [1] | Bolt M10 x 50mm | ITEM 5 | |
| 33. | 823/00326 | [3] | Washer M10 X 30mm | ITEMS 4,5 | |
| 34. | 122/40304 | [1] | Mount Cable Tie | ITEM 5 | |
| 1. | 231/03900 | [1] | Link tipping | ||
| 1. | 231/33802 | [1] | Plate support | ||
| 1. | 333/P6066 | [1] | Hose -4 HP, 2950mm ORFS | ||
| 1. | 700/50029 | [1] | Work lamp | ||
| 2. | Excavator end assembly | ||||
| 2. | Protection ram assembly | ||||
| 2. | 331/38623 | [1] | Plate Protection | ||
| 2. | 811/90697 | [2] | Pin Pivot | ||
| 2. | 333/P6067 | [1] | Hose -4 HP 2950mm ORFS | ||
| 2. | 721/10821 | [1] | Harness Boom worklight | ||
| 3. | Link bucket assembly | ||||
| 3. | 826/01622 | [2] | Screw cap c/sunk | ||
| 3. | 332/P8642 | [1] | Ram Boom Assembly | ||
| 4. | 1450/0001 | [2] | Nipple grease, straight 1/8 BSP | ||
| 4. | 332/P9696 | [1] | Ram Swing Assembly | ||
| 5. | 333/P4693 | [1] | Dipper Long Assembly | ||
| 5. | 332/P9698 | [1] | Ram Dipper Assembly | ||
| 6. | 332/T4732 | [2] | Screw Dome head M10x80 | ||
| 6. | 332/P9699 | [1] | Ram Bucket Assembly | ||
| 7. | Excavator end Assembly | ||||
| 7. | 911/23900 | [2] | Pin pivot 189mm | ||
| 8. | 811/50178 | [1] | Pin pivot 30 x 174mm | ||
| 8. | 826/00600 | [1] | Pin linch | ||
| 9. | 332/T4657 | [2] | Link Tipping Machining | ||
| 12. | 1315/3418D | [1] | Bolt M10 x 80 | ||
| 13. | Work lamp boom assembly | ||||
| 1. | Track rubber assembly | ||||
| 1. | 331/40765 | [2] | Track Rubber 230 x 33 x 96 | ||
| 1. | 332/R4804 | [1] | Dozerblade | ||
| 1. | 20/925544 | [1] | Motor Track single speed | ||
| 1. | 332/W4015 | [1] | Joint rotary 7 port | ||
| 2. | 332/S5940 | [1] | Undercarriage | ||
| 2. | 332/P8650 | [1] | Ram dozer | ||
| 2. | 231/80801 | [1] | Sprocket | ||
| 2. | 1751/0606 | [6] | Adaptor ORFS M -06 /SAE ORB -06 | ||
| 3. | Undercarriage assembly | ||||
| 3. | Dozer assembly | ||||
| 3. | 331/43787 | [1] | Guard Ram | ||
| 3. | 1391/3407D | [17] | Capscrew M10 x 25mm | ||
| 4. | 1315/0405D | [2] | Setscrew M10 x 20 | ||
| 4. | Motor track, assembly single speed | ||||
| 4. | 823/00416D | [17] | Washer Spring M10 | ||
| 5. | Rotary joint 7 port assembly | ||||
| 5. | 811/90544 | [2] | Pin Pivot | ||
| 5. | 1751/0806 | [2] | Adaptor ORFS | ||
| 5. | 1757/0606C | [2] | Adaptor ORFS male stud | ||
| 6. | 236/60122 | [2] | Idler screw tension assembly | ||
| 6. | 811/90567 | [2] | Pin Pivot Dia 30mm x 137mm LNG | ||
| 6. | 1752/0606 | [2] | Adaptor ORFS M-06 / M-06 SAE EXT MED | ||
| 7. | 1315/3415D | [4] | Bolt M10x65 | ||
| 7. | 332/V6055 | [6] | Roller track assembly | ||
| 7. | 1315/0308D | [4] | Setscrew M8 x 30 mm | ||
| 8. | 823/00394 | [12] | Washer M12 | FOR TRACK ROLLER | |
| 8. | 1420/0008D | [2] | Washer (M10) | ||
| 8. | 1370/0203D | [4] | Nut Lock M8 | ||
| 9. | 1370/0303D | [4] | Nut Self Lock M10 | ||
| 9. | 1315/0507D | [12] | Setscrew M12 x 25 mm | FOR TRACK ROLLER | |
| 9. | 1420/0007D | [8] | Washer (M8) | ||
| 10. | 821/10322 | [1] | Ring slew | ||
| 10. | 1450/1001 | [2] | Nipple grease 90deg. angle | ||
| 11. | 6009/3508D | [18] | Bolt M12 x 30 | ||
| 12. | 823/00309 | [18] | Washer hardened (13mm x 23mm x 2.7mm) | ||
| 13. | 2105/1609 | [2] | Dowel | FOR SLEW RING | |
| 14. | 331/39000 | [1] | Plate cover | ||
| 18. | 332/T5728 | [2] | Plate Motor Cover | ||
| 19. | 1315/0305D | [6] | Setscrew M8 x 20mm | FOR MOTOR COVER PLAT | |
| 21. | 828/00404 | [2] | Grommet | FOR DOZER HOSES | |
| 22. | 332/P8645 | [1] | Hose -6 HP 720mm ORFS | RJ4 TO LH TRACK/MOTO | |
| 23. | 332/P8659 | [1] | Hose -6 HP 720mm ORFS | RJ6 TO LH TRACK/MOTO | |
| 24. | 332/P8651 | [1] | Hose -6 HP 620mm ORFS | RJ5 TO RH TRACK/MOTO | |
| 25. | 332/P8654 | [1] | Hose -6 HP 620mm ORFS | RJ3 TO RH TRACK/MOTO | |
| 26. | 333/P1668 | [1] | Hose -4 580mm ORFS | RJ7 TO RH TRACK/MOTO | |
| 27. | 332/P8627 | [1] | Hose -4 860mm ORFS | RJ7 TO LH TRACK/MOTO | |
| 28. | 333/P2851 | [1] | Hose -4 HP 520mm ORFS | RJ1 TO DOZER DUMP | |
| 29. | 333/P2852 | [1] | Hose -4 HP 520mm ORFS | RJ2 TO DOZER ROD | |
| 30. | 335/07439 | [2] | Plate Cover | ||
| 1. | 4002/0815 | [30] | Oil hydraulic 46 | ||
| 2. | 4001/0100 | [0] | Oil engine | QTY:4.5 | |
| 3. | 4000/0300 | [0] | Fluid Gear Oil | ||
| 4. | 4006/1100 | [0] | Fluid antifreeze | ||
| 5. | Lubricant assembly | ||||
| 5. | 4003/1200 | [0] | Grease | ||
| 6. | Grease heavy duty | ||||