ABSORBER AS-SHOCK 1138622 - Caterpillar

Illustration 1 g01384680
(1) Front Magnetic Oil Filter
(2) Rear Magnetic Oil Filter
Illustration 2 g01448141
Magnetic Oil Filter
Remove the two magnetic filters from the axle oil cooler lines.
Wash the filters in a clean nonflammable solvent. Inspect the filters for damage. Replace the filters if the filters are damaged. Note: If the oil samples for the differential oil show a particle count that is higher than normal, clean the filters for the axle oil cooler at an earlier interval.
Install the two filters for the axle oil cooler.
Close the engine hood.
Start the engine. Operate the machine in order to circulate the oil.
Stop the engine.
Illustration 3 g01264367
Front Differential and Final Drive Filler Plug
Illustration 4 g01264369
Rear Differential and Final Drive Filler Plug
Note: Wipe the covers and surfaces around openings before you remove the filler plug.
Remove the filler plugs for both differentials. Fill the differentials with oil. Maintain the oil level at the bottom of the filler plug hole.
Install the filler plugs for each differential. Operate the machine for a few minutes and allow the oil to flow completely through the axles. Remove the filler plugs and check the oil level. Add oil, if necessary. Reference: Refer to Operation and Maintenance Manual, "Lubricant Viscosities"
for the proper oil.Reference: Refer to Operation and Maintenance Manual, "Capacities (Refill)"
for the amount of oil.
Clean the filler plugs and install the filler plugs.