ABSORBER A. 7F7931 - Caterpillar

Assembly Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     9S-3263     Thread Lock Compound     1    
Illustration 1 g01147819
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install piston (10), shims (9), spring (8), O-ring seal (7), and plug (6) .
Install spring (11), O-ring seal (12), and plug (14) .
Apply Tooling (A) to orifice (3) .
Install cartridge (4), orifice (3), O-ring seal (2), and plug (1). Tighten orifice 3 to a torque of 0.67 0.11 N m (6 1 lb in).
Install switch (5) into housing (13). Tighten switch (5) to a torque of 80 10 N m (59 7 lb ft).End By: Install the hoist manifold.