ACCUMULATOR AS-RIDE CONTROL 1085933 - Caterpillar

Illustration 1 g00632424
(1) Main display module
(2) Gauge cluster module
(3) "BLACKSTART SYSTEM ENUNCIATOR"
(4) "SCROLL" switch
(5) "EMERGENCY STOP" button
(6) "Secondary Electronic Control Module (ECM) ready" indicator
(7) "Secondary ECM in control" indicator
(8) "BLACKSTART" push button
(9) Engine control switch The electronic instrument panel is the center for engine control and for information about engine operation. Each component of the instrument panel is described below.Main display module (1) - This module is the main component of the system. The module receives information from the switches, sensors and other electronic controls on the engine via the CAT Data Link. The module processes the information. The information is output to the gauge cluster.Gauge cluster module (2) - The gauge needles are controlled by information that is processed by the main display module."BLACKSTART SYSTEM ENUNCIATOR" (3) - The enunciator monitors the condition of the power that is supplied to the electrical system."SCROLL" switch (4) - The main display module is capable of seven different modes of operation. The "SCROLL" switch is used to display the various parameters that are within each mode.Emergency Stop button (5) - This button is used to stop the engine quickly in an emergency situation. When this button is pressed, the fuel injection is disabled and the air shutoffs are activated."Secondary ECM ready" indicator (6) - This green indicator illuminates in order to indicate that the secondary ECM is ready for use."Secondary ECM in control" indicator (7) - This yellow indicator illuminates in order to indicate that the primary ECM is no longer in control of engine operation. The secondary ECM is in control."BLACKSTART" push button (8) - This green push button will illuminate when the engine control switch is in the "BLACKSTART ENABLE" position. When the illuminated push button is pressed, the engine will start.
Illustration 2 g00632339
Engine control switch in the "OFF/RESET" position
Engine control switch (9) - This switch is used to control the engine operation. The switch has these four positions: "DGCP START ENABLE", "BLACKSTART ENABLE", "STOP" and "OFF/RESET"."DGCP START ENABLE" (3 o'clock) - This position enables the engine operation to be controlled from a remote location. When the switch is in this position, the engine can be started, monitored, and stopped from the diesel generator control panel (DGCP)."BLACKSTART ENABLE" (6 o'clock) - When the switch is turned to this position, the green "BLACKSTART" push button will illuminate. When the illuminated push button is pressed, the engine will start. The engine can be stopped from a remote location when the switch is in this position. However, the engine cannot be started from a remote location with the switch in this position."STOP" (9 o'clock) - This position is used for manual engine stopping. When the engine control switch is turned to this position, the engine will stop immediately. The power to the control panel is maintained when the switch is in this position."OFF/RESET" (12 o'clock) - When the switch is turned to this position, power is removed from the control panel. This position will also reset the system if any events have occurred.