ACCUMULATOR GP-STABILIZER 1950255 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7573     Link Bracket     2    
Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
Illustration 1 g00463309
Use Tooling (A) and a hoist to position final drive (1) into the wheel assembly. The final drive weighs approximately 75 kg (165 lb).
Illustration 2 g00463311
Install twenty bolts (2). Tighten the bolts to a torque of 270 25 N m (200 18 lb ft).End By: Install the axle shafts. Refer to Disassembly and Assembly, "Axle Shaft - Install". The information is in this manual.