ACCUMULATOR GP-HYDRAULIC 2125693 - Caterpillar

Restraint for Bulldozer Control Lever
Illustration 1 g00466907
Rotate plate (1) down until hole (3) engages pin (2).
Rotate plate (5) until the plate engages the notch in pin (2).
Hole (4) in plate (1) and in plate (5) will accommodate a 5P-8501 Padlock. Bulldozer Blade Lift Control
Hold (1) - The lever will return to the HOLD position, when you release the lever from the RAISE position and from the LOWER position.
Raise (2) - Pull back on the lever in order to raise the blade. Release the lever. The lever will return to the HOLD position.
Float (3) - Push the lever forward into the detent. This will move the bulldozer blade into the FLOAT position. In the FLOAT position, the blade moves up and down with the ground contour.The lever will remain in the FLOAT detent until you manually pull the lever out of the detent position. The lever then returns to HOLD position.
Lower (4) - Push the lever forward in order to lower the blade. Release the lever. The lever will return to the HOLD position. The movement of the bulldozer blade stops.Bulldozer Blade Tilt Control
Illustration 2 g00434379
Tilt Hold (1) - When you release the lever, the lever returns to the HOLD position. The movement of the bulldozer blade stops.
Tilt Left (2) - Pull the tilt lever toward the left in order to lower the left side of the bulldozer blade. When you release the lever, the lever returns to the HOLD position.
Tilt Right (3) - Push the tilt lever toward the right in order to lower the right side of the bulldozer blade. When you release the lever, the lever returns to the HOLD position.