ACCUMULATOR GP-BRAKE 3182533 - Caterpillar

Removal Procedure
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.
Note: Inspect all O-rings, seals, and gaskets for wear and damage. Replace if necessary.
Illustration 1 g06234351
Disconnect three hoses (1).
Remove five bolts (1) and bracket (3).
Illustration 2 g06237400
Remove two bolts (4).
Illustration 3 g06237472
Remove bolt (5).
Illustration 4 g06237510
Loosen hose clamp (5) and clip/bolt assembly (8) and set hose (9) out of the way.
Disconnect hose (6) and set out of the way.
Disconnect coolant level sensor (7) and remove the expansion tank (10).Installation Procedure
Install the expansion tank (7) in the reverse order of removal.