ACCUMULATOR GP-BRAKE 3609700 - Caterpillar

When the blade has been equipped with the AccuGrade elevation sensors, care must be taken when you are moving the circle and/or the blade to the maximum positions (left or right).Damage may occur to the sensors and/or the coiled cable harnesses that are associated with the sensors when the blade and/or the circle are moved to the maximum position (left or right).
The Display dual control box has an LCD that shows specific information related to the current job.The Operating mode that is selected affects how the screen looks in Guidance mode.Guidance Mode
When the system is configured as a Single Laser System, a screen similar to the one shown in Illustration 1 appears.Independent Mode
Illustration 1 g01128751
(21) Left Sensor Position Window (22) Right Sensor Position Window (23) Device Status Icons (24) Left Elevation Display Icon (25) Right Elevation Display Icon (26) Left Guidance Source Icon (8) Left Reference Elevation (9) Percent of Slope (10) Right Guidance Source IconThe following items describe how the Cross Slope System works:
Mount the electric mast and laser receiver on the desired side of the blade.
Select Independent operating mode.
Toggle the elevation select switch to the side of the blade with laser operation.
Use the Menu Scroll switches or the remote switch to enter the desired cross-slope.
Place the cross-slope side in automatic to get the blade to the desired slope.
Place the blade tip with the electric mast on a bench mark.
Bench the electric mast by pressing the left bench button if the electric mast is mounted on the left. Bench the electric mast by pressing the right bench button if the electric mast is mounted on the right.
Set the reference elevation.
Move the machine and place both sides of the blade in automatic. Apply any offsets if desired.Cut/Fill Mode
Illustration 2 g01349599
(21) Left Sensor Position Window (22) Right Sensor Position Window (23) Device Status Icons (25) Right Elevation Display Icon (26) Left Guidance Source Icon (28) Left Reference Elevation (29) Right Slope (30) Right Guidance Source IconA Guidance mode screen similar to that shown in Illustration 2 appears when you are in Cut/Fill mode.The following items outline how the system works in Cut/Fill mode:
The Guidance screen shows the cut/fill required to reach the reference elevation based on the bench of the electric mast. A positive value means cut and a negative value means fill.
Both "Menu Scroll" switches are disabled.
The remote offset switches are disabled.
The "Elevation Select" Switch does not work in the single elevation system.