ACCUMULATOR GP 3654859 - Caterpillar

1. Turn off the fuel supply to the engine at the fuel tank. 2. Remove the cotter pin and pin (1) from the governor control rod on right side of the firewall. 3. Remove the cotter pin and pin (2) from the governor control rod and cross shaft on the left side of the firewall. 4. Remove the two nuts which hold cross shaft (3) to the engine firewall. 5. Remove bolts (4) and firewall (5) from the machine. 6. Disconnect fuel line (7) from the bottom of the fuel tank. 7. Remove five bolts and ladder (8) from the left side of the machine. 8. Remove bolts and left fender (9) from the machine. 9. Install wood block (11) between the frame and the dash.10. Remove seven bolts (10) from the front of the fuel tank assembly. 9. Remove two nuts (13) and washers.10. Disconnect wire (12) from the horn. 11. Install tooling (A) on the fuel tank. Fasten a hoist to tooling (A).12. Remove bolts (15) and fuel tank (14) from the machine. Empty weight of fuel tank (14) is 170 lb. (77 kg).Install Fuel Tank
1. Install tooling (A) on fuel tank (1). Fasten a hoist to tooling (A) and put the fuel tank in position. Install the bolts which hold the fuel tank to the machine. 2. Install bracket (6). Install nuts (3), and (4), and washers.3. Connect wire (5) to horn (2). 4. Install bolts (7) which hold the fuel tank to dash (8).5. Remove wood block (9) from between the frame and dash (8). 6. Put left fender (10) in position and install the bolts. 7. Install ladder (11) and the bolts which hold it to the machine. 8. Connect fuel line (12) to valve on the bottom of the fuel tank. 9. Put firewall (13) in position and install the bolts which hold it to the hydraulic tank and fuel tank. 10. Put cross shaft assembly (14) in position. Install supports (15) in firewall (13) and install the nuts. 11. Install pin and cotter pin in governor control rod (16) and cross shaft assembly. 12. Put pedal assembly rod (17) in position. Install pin and cotter pin.13. Fill the fuel tank to the correct level with fuel.end by:a) install seatb) install floor platesc) install Roll-Over Protective Structured) install side doors and hood