ACCUMULATOR 4693062 - Caterpillar

Install screw (22). Tighten nut (23) to a torque of 18 4 N m (160 35 lb in).
Illustration 2 g00975268
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install stop (18), spring (19), spool assembly (20), and slug (21) .
Illustration 3 g00975266
Install O-ring seal (17) on plug (16) .
Illustration 4 g00975263
Install plug (16) .
Illustration 5 g00975262
Install plate (15) and bolts (14). Tighten bolts (14) to a torque of 30 4 N m (22 3 lb ft).
Illustration 6 g00975261
Install O-ring seals (13) on cartridge assembly (12). Be sure to lubricate O-ring seals (13) before installation.
Illustration 7 g00975260
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spring (10), spool assembly (11), and cartridge assembly (12). Tighten cartridge assembly (12) to a torque of 50 5 N m (37 4 lb ft).
Illustration 8 g00975259
Install coil (7), washer (8), and nut (9). Tighten nut (9) to a torque of 13 2 N m (115 18 lb in).
Illustration 9 g00975258
Install O-ring seal (6) on fitting assembly (5) .
Illustration 10 g00975257
Install fitting assembly (5). Tighten fitting assembly (5) to a torque of 14 4 N m (124 35 lb in).
Repeat Steps 6 through 10 for the remaining modulating valves.
Illustration 11 g01729617
Install modulating valves (4) and mounting bolts (4A). Tighten mounting bolts (4A) to a torque of 30 4 N m (22 3 lb ft).
Illustration 12 g00975254
Install O-ring seals (2) on tubes (3). Be sure to lubricate O-ring seals (2) before installation. Install tubes (3) .
Illustration 13 g00975253
Install harness assembly (1) .End By: Install the transmission hydraulic control valve.