ACCUMULATOR A. 6J3675 - Caterpillar

Removal Procedure
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g06310133
Remove cover (1).
Illustration 2 g06310372
Disconnect hose assemblies (2) and (3) from blade cylinder (4).
Illustration 3 g06310376
Illustration 4 g06310388
Remove pin assemblies (5) and (6). Remove blade cylinder (4).Installation Procedure
Install blade cylinder (4) in the reverse order of removal procedure.