ACTUATOR-ROCKER 1349563 - Caterpillar

Removal Procedure
Start By:
Remove the seat. Refer to Disassembly and Assembly, "Seat - Remove".
Drain the engine coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Personal injury can result from contact with refrigerant.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.
Recover the air conditioner refrigerant from the air conditioner system. The correct charge is 0.8 kg (1.8 lb). Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct procedure.
Illustration 1 g01093765
Remove air filter (2) .
Remove screws (1) and the clips.
Remove cover (3) .
Illustration 2 g02010680
Remove the right side console. Refer to Disassembly and Assembly, "Cab - Remove" in order to reference the location of bolts and harnesses for removal.
Illustration 3 g01093766
Disconnect heater hose assemblies (5) .
Disconnect air conditioner hose assemblies (4) .
Illustration 4 g01093768
Remove evaporator (6) .
Illustration 5 g01093769
Disconnect harness assemblies (8) .
Remove blower motor (7) .
Remove screws (9) .
Remove thermostat (10) and resistor (11) .