ACTUATOR GP-POWER 1967329 - Caterpillar

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Note: Put identification marks on all lines, on all hoses, on all harness assemblies, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g01356285
Remove plate (1) .
Illustration 2 g01356286
Close fuel shutoff valve (2) .
Illustration 3 g01927375
Open door (3) .
Illustration 4 g01356319
Disconnect harness assemblies (4). Disconnect hose assemblies (7) .
Use Tooling (A) to remove fuel filter (8) .
Remove bolts (5) and fuel filter base (6) .Installation Procedure
Table 2
Required Tools    
Tool    Part Number    Part Description    Qty    
A     185-3630     Strap Wrench As     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Inspect the O-ring seals. Replace the O-ring seals that are worn or damaged.
Illustration 5 g01356319
Position fuel filter base (6) and install bolts (5) .
Use Tooling (A) to install fuel filter (8) .
Connect harness assemblies (4). Connect hose assemblies (7) .
Illustration 6 g01927375
Close door (3) .
Illustration 7 g01356286
Open fuel shutoff valve (2) .
Illustration 8 g01356285
Install plate (1) .