ACTUATOR GP- 3079158 - Caterpillar

Disassembly Procedure
Start By:
Remove the steering neutralizer valve. Refer to Disassembly and Assembly, "Steering Neutralizer Valve - Remove".Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g01157020
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove plug assembly (1), O-ring seal (2), spring (3), and ball (4) .
Remove boot (5) and lip seal (6) .
Remove stem (7) .
Remove plug (10), O-ring seal (9), and spring (8) .