ACTUATOR & MTG GP-BYPASS 3262622 - Caterpillar

Installation Procedure
Illustration 1 g00993339
Position washer assembly (14).
Illustration 2 g00993340
Position idler gear (13) and idler shaft (12).
Illustration 3 g00993337
Install bolts (10) and bolts (11) into idler shaft (12).
Illustration 4 g00993336
Install adapter assembly (9) and the O-ring seals. Auxiliary drive shaft (7) is attached to adapter assembly.
Install bolts (8).
Illustration 5 g00993335
Position gear (6) onto auxiliary drive shaft (7).
Install bolts (5).
Illustration 6 g00993334
Position adapter assembly (4).
Install bolts (3).
Illustration 7 g00993333
Position the gasket. Install cover (2).
Position the O-ring seals. Install cover (1). End By:
Install the vibration damper. Refer to Disassembly and Assembly, "Vibration Damper - Remove and Install".
Install the auxiliary water pump. Refer to Disassembly and Assembly, "Auxillary Water Pump - Install".