ACTUATOR GP- 5217528 - Caterpillar

Typical Example1. Remove the drain plug and drain the oil from the engine into a suitable container for storage or disposal.2. Remove the lower clamp and bracket that hold the breather tube to the cylinder block and oil pan.3. Remove all but four of the bolts (1) that hold the oil pan to the cylinder block.
Use two persons to hold the oil pan in position while the last four bolts are removed.
4. Remove oil pan (2). Weight of the oil pan is 57 kg (126 lb). 5. Remove suction bell (3). Remove suction bell and tube (4). Remove oil supply tube (5). Remove plate (6).Install Oil Pan & Plate 1302-012
1. Put plate (1) in position on the cylinder block. Put suction bell and tube (2) in position on the oil pump and cylinder block. Install the bolts that hold it.2. Install oil supply tube (4).3. Install the suction bell (3).4. Install two 3/8 in-16 NC Guide Pins 6 in longin the cylinder block. Put the oil pan (5) in position on the cylinder block. Install all but two of the bolts that hold it. Remove the two guide pins. Install the last two bolts.5. Install the drain plug and tighten to a torque of 81 11 N m (61 8 lb ft).6. Fill the engine with oil to the correct level. See the Operation & Maintenance Manual.