ADAPTER 0039859 - Caterpillar

Illustration 1 g02760141
Table 1
Specification for 262-4418 Ripper Cylinder Gp
Item Qty Part Specification Description
1 1 7J-5639 Locking Bolt Lubricate the threads before assembly.
Torque to 1125 100 N m (830 74 lb ft).
2 1 191-6159 Head Lubricate the threads with clean grease.
Torque to 600 130 N m (443 96 lb ft).
3 1 7K-6365 Bushing Installation depth of the bushing is 3.5 0.5 mm (0.14 0.012 inch).
Bore of the bushing before assembly is 38.260 0.020 mm (1.5063 0.0008 inch).
4 1 7K-6365 Bushing Bore of the bushing before assembly is 38.260 0.020 mm (1.5063 0.0008 inch).
Bushings must not extend beyond either surface of the rod assembly.
5 1 167-2186 Buffer Seal As Lubricate the sealing lip lightly with lubricant being sealed.
6 1 167-2294 U-Cup Seal Lubricate the sealing lip lightly with lubricant being sealed.
7 1 226-8202 Wiper Seal Lubricate the sealing lip lightly with lubricant being sealed.
8 - - Apply green Loctite 609 to the wiper seal groove before assembly.
C 1 262-9253 Hydraulic Cylinder Bore of the cylinder assembly is 76.00 to 76.25 mm (2.992 to 3.002 inch).
D 1 193-1546 Rod As Diameter of the rod is 38.050 0.038 mm (1.4980 0.0015 inch).
E 1 191-6159 Head Bore of the head over the four lands is 38.43 0.03 mm (1.513 0.001 inch).